Improve this Doc View Source $animateCss

  1. service in module ngAnimate

Overview

The $animateCss service is a useful utility to trigger customized CSS-based transitions/keyframes from a JavaScript-based animation or directly from a directive. The purpose of $animateCss is NOT to side-step how $animate and ngAnimate work, but the goal is to allow pre-existing animations or directives to create more complex animations that can be purely driven using CSS code.

Note that only browsers that support CSS transitions and/or keyframe animations are capable of rendering animations triggered via $animateCss (bad news for IE9 and lower).

General Use

Once again, $animateCss is designed to be used inside of a registered JavaScript animation that is powered by ngAnimate. It is possible to use $animateCss directly inside of a directive, however, any automatic control over cancelling animations and/or preventing animations from being run on child elements will not be handled by AngularJS. For this to work as expected, please use $animate to trigger the animation and then setup a JavaScript animation that injects $animateCss to trigger the CSS animation.

The example below shows how we can create a folding animation on an element using ng-if:

<!-- notice the `fold-animation` CSS class -->
<div ng-if="onOff" class="fold-animation">
  This element will go BOOM
</div>
<button ng-click="onOff=true">Fold In</button>

Now we create the JavaScript animation that will trigger the CSS transition:

ngModule.animation('.fold-animation', ['$animateCss', function($animateCss) {
  return {
    enter: function(element, doneFn) {
      var height = element[0].offsetHeight;
      return $animateCss(element, {
        from: { height:'0px' },
        to: { height:height + 'px' },
        duration: 1 // one second
      });
    }
  }
}]);

More Advanced Uses

$animateCss is the underlying code that ngAnimate uses to power CSS-based animations behind the scenes. Therefore CSS hooks like .ng-EVENT, .ng-EVENT-active, .ng-EVENT-stagger are all features that can be triggered using $animateCss via JavaScript code.

This also means that just about any combination of adding classes, removing classes, setting styles, dynamically setting a keyframe animation, applying a hardcoded duration or delay value, changing the animation easing or applying a stagger animation are all options that work with $animateCss. The service itself is smart enough to figure out the combination of options and examine the element styling properties in order to provide a working animation that will run in CSS.

The example below showcases a more advanced version of the .fold-animation from the example above:

ngModule.animation('.fold-animation', ['$animateCss', function($animateCss) {
  return {
    enter: function(element, doneFn) {
      var height = element[0].offsetHeight;
      return $animateCss(element, {
        addClass: 'red large-text pulse-twice',
        easing: 'ease-out',
        from: { height:'0px' },
        to: { height:height + 'px' },
        duration: 1 // one second
      });
    }
  }
}]);

Since we're adding/removing CSS classes then the CSS transition will also pick those up:

/* since a hardcoded duration value of 1 was provided in the JavaScript animation code,
the CSS classes below will be transitioned despite them being defined as regular CSS classes */
.red { background:red; }
.large-text { font-size:20px; }

/* we can also use a keyframe animation and $animateCss will make it work alongside the transition */
.pulse-twice {
  animation: 0.5s pulse linear 2;
  -webkit-animation: 0.5s pulse linear 2;
}

@keyframes pulse {
  from { transform: scale(0.5); }
  to { transform: scale(1.5); }
}

@-webkit-keyframes pulse {
  from { -webkit-transform: scale(0.5); }
  to { -webkit-transform: scale(1.5); }
}

Given this complex combination of CSS classes, styles and options, $animateCss will figure everything out and make the animation happen.

How the Options are handled

$animateCss is very versatile and intelligent when it comes to figuring out what configurations to apply to the element to ensure the animation works with the options provided. Say for example we were adding a class that contained a keyframe value and we wanted to also animate some inline styles using the from and to properties.

var animator = $animateCss(element, {
  from: { background:'red' },
  to: { background:'blue' }
});
animator.start();
.rotating-animation {
  animation:0.5s rotate linear;
  -webkit-animation:0.5s rotate linear;
}

@keyframes rotate {
  from { transform: rotate(0deg); }
  to { transform: rotate(360deg); }
}

@-webkit-keyframes rotate {
  from { -webkit-transform: rotate(0deg); }
  to { -webkit-transform: rotate(360deg); }
}

The missing pieces here are that we do not have a transition set (within the CSS code nor within the $animateCss options) and the duration of the animation is going to be detected from what the keyframe styles on the CSS class are. In this event, $animateCss will automatically create an inline transition style matching the duration detected from the keyframe style (which is present in the CSS class that is being added) and then prepare both the transition and keyframe animations to run in parallel on the element. Then when the animation is underway the provided from and to CSS styles will be applied and spread across the transition and keyframe animation.

What is returned

$animateCss works in two stages: a preparation phase and an animation phase. Therefore when $animateCss is first called it will NOT actually start the animation. All that is going on here is that the element is being prepared for the animation (which means that the generated CSS classes are added and removed on the element). Once $animateCss is called it will return an object with the following properties:

var animator = $animateCss(element, { ... });

Now what do the contents of our animator variable look like:

{
  // starts the animation
  start: Function,

  // ends (aborts) the animation
  end: Function
}

To actually start the animation we need to run animation.start() which will then return a promise that we can hook into to detect when the animation ends. If we choose not to run the animation then we MUST run animation.end() to perform a cleanup on the element (since some CSS classes and styles may have been applied to the element during the preparation phase). Note that all other properties such as duration, delay, transitions and keyframes are just properties and that changing them will not reconfigure the parameters of the animation.

runner.done() vs runner.then()

It is documented that animation.start() will return a promise object and this is true, however, there is also an additional method available on the runner called .done(callbackFn). The done method works the same as .finally(callbackFn), however, it does not trigger a digest to occur. Therefore, for performance reasons, it's always best to use runner.done(callback) instead of runner.then(), runner.catch() or runner.finally() unless you really need a digest to kick off afterwards.

Keep in mind that, to make this easier, ngAnimate has tweaked the JS animations API to recognize when a runner instance is returned from $animateCss (so there is no need to call runner.done(doneFn) inside of your JavaScript animation code). Check the animation code above to see how this works.

Usage

$animateCss(element, options);

Arguments

Param Type Details
element DOMElement

the element that will be animated

options object

the animation-related options that will be applied during the animation

  • event - The DOM event (e.g. enter, leave, move). When used, a generated CSS class of ng-EVENT and ng-EVENT-active will be applied to the element during the animation. Multiple events can be provided when spaces are used as a separator. (Note that this will not perform any DOM operation.)
  • structural - Indicates that the ng- prefix will be added to the event class. Setting to false or omitting will turn ng-EVENT and ng-EVENT-active in EVENT and EVENT-active. Unused if event is omitted.
  • easing - The CSS easing value that will be applied to the transition or keyframe animation (or both).
  • transitionStyle - The raw CSS transition style that will be used (e.g. 1s linear all).
  • keyframeStyle - The raw CSS keyframe animation style that will be used (e.g. 1s my_animation linear).
  • from - The starting CSS styles (a key/value object) that will be applied at the start of the animation.
  • to - The ending CSS styles (a key/value object) that will be applied across the animation via a CSS transition.
  • addClass - A space separated list of CSS classes that will be added to the element and spread across the animation.
  • removeClass - A space separated list of CSS classes that will be removed from the element and spread across the animation.
  • duration - A number value representing the total duration of the transition and/or keyframe (note that a value of 1 is 1000ms). If a value of 0 is provided then the animation will be skipped entirely.
  • delay - A number value representing the total delay of the transition and/or keyframe (note that a value of 1 is 1000ms). If a value of true is used then whatever delay value is detected from the CSS classes will be mirrored on the elements styles (e.g. by setting delay true then the style value of the element will be transition-delay: DETECTED_VALUE). Using true is useful when you want the CSS classes and inline styles to all share the same CSS delay value.
  • stagger - A numeric time value representing the delay between successively animated elements (Click here to learn how CSS-based staggering works in ngAnimate.)
  • staggerIndex - The numeric index representing the stagger item (e.g. a value of 5 is equal to the sixth item in the stagger; therefore when a stagger option value of 0.1 is used then there will be a stagger delay of 600ms)
  • applyClassesEarly - Whether or not the classes being added or removed will be used when detecting the animation. This is set by $animate when enter/leave/move animations are fired to ensure that the CSS classes are resolved in time. (Note that this will prevent any transitions from occurring on the classes being added and removed.)
  • cleanupStyles - Whether or not the provided from and to styles will be removed once the animation is closed. This is useful for when the styles are used purely for the sake of the animation and do not have a lasting visual effect on the element (e.g. a collapse and open animation). By default this value is set to false.

Returns

object

an object with start and end methods and details about the animation.

  • start - The method to start the animation. This will return a Promise when called.
  • end - This method will cancel the animation and remove all applied CSS classes and styles.

© 2010–2020 Google, Inc.
Licensed under the Creative Commons Attribution License 3.0.
https://code.angularjs.org/1.8.2/docs/api/ngAnimate/service/$animateCss