Services

The Chef server has a built in process supervisor, which ensures that all of the required services are in the appropriate state at any given time. The supervisor starts two processes per service.

Service Subcommands

This command has a built in process supervisor that ensures all of the required services are in the appropriate state at any given time. The supervisor starts two processes per service and provides the following subcommands for managing services: hup, int, kill, once, restart, service-list, start, status, stop, tail, and term.

hup

The hup subcommand is used to send a SIGHUP to all services. This command can also be run for an individual service by specifying the name of the service in the command.

This subcommand has the following syntax:

$ chef-server-ctl hup SERVICE_NAME

where SERVICE_NAME represents the name of any service that is listed after running the service-list subcommand.

int

The int subcommand is used to send a SIGINT to all services. This command can also be run for an individual service by specifying the name of the service in the command.

This subcommand has the following syntax:

$ chef-server-ctl int SERVICE_NAME

where SERVICE_NAME represents the name of any service that is listed after running the service-list subcommand.

kill

The kill subcommand is used to send a SIGKILL to all services. This command can also be run for an individual service by specifying the name of the service in the command.

This subcommand has the following syntax:

$ chef-server-ctl kill SERVICE_NAME

where SERVICE_NAME represents the name of any service that is listed after running the service-list subcommand.

once

The supervisor for the Chef server is configured to restart any service that fails, unless that service has been asked to change its state. The once subcommand is used to tell the supervisor to not attempt to restart any service that fails.

This command is useful when troubleshooting configuration errors that prevent a service from starting. Run the once subcommand followed by the status subcommand to look for services in a down state and/or to identify which services are in trouble. This command can also be run for an individual service by specifying the name of the service in the command.

This subcommand has the following syntax:

$ chef-server-ctl once SERVICE_NAME

where SERVICE_NAME represents the name of any service that is listed after running the service-list subcommand.

restart

The restart subcommand is used to restart all services enabled on the Chef server or to restart an individual service by specifying the name of that service in the command.

Warning

When running the Chef server in a high availability configuration, restarting all services may trigger failover.

This subcommand has the following syntax:

$ chef-server-ctl restart SERVICE_NAME

where SERVICE_NAME represents the name of any service that is listed after running the service-list subcommand. When a service is successfully restarted the output should be similar to:

$ ok: run: service_name: (pid 12345) 1s

service-list

The service-list subcommand is used to display a list of all available services. A service that is enabled is labeled with an asterisk (*).

This subcommand has the following syntax:

$ chef-server-ctl service-list

start

The start subcommand is used to start all services that are enabled in the Chef server. This command can also be run for an individual service by specifying the name of the service in the command.

This subcommand has the following syntax:

$ chef-server-ctl start SERVICE_NAME

where SERVICE_NAME represents the name of any service that is listed after running the service-list subcommand. When a service is successfully started the output should be similar to:

$ ok: run: service_name: (pid 12345) 1s

The supervisor for the Chef server is configured to wait seven seconds for a service to respond to a command from the supervisor. If you see output that references a timeout, it means that a signal has been sent to the process, but that the process has yet to actually comply. In general, processes that have timed out are not a big concern, unless they are failing to respond to the signals at all. If a process is not responding, use a command like the kill subcommand to stop the process, investigate the cause (if required), and then use the start subcommand to re-enable it.

status

The status subcommand is used to show the status of all services available to the Chef server. The results will vary based on the configuration of a given server. This subcommand has the following syntax:

$ chef-server-ctl status

and will return the status for all services. Status can be returned for individual services by specifying the name of the service as part of the command:

$ chef-server-ctl status SERVICE_NAME

where SERVICE_NAME represents the name of any service that is listed after running the service-list subcommand.

When service status is requested, the output should be similar to:

$ run: service_name: (pid 12345) 12345s; run: log: (pid 1234) 67890s

where

  • run: is the state of the service (run: or down:)
  • service_name: is the name of the service for which status is returned
  • (pid 12345) is the process identifier
  • 12345s is the uptime of the service, in seconds

For example:

$ down: opscode-erchef: (pid 35546) 10s

By default, runit will restart services automatically when the services fail. Therefore, runit may report the status of a service as run: even when there is an issue with that service. When investigating why a particular service is not running as it should be, look for the services with the shortest uptimes. For example, the list below indicates that the opscode-erchef should be investigated further:

run: oc-id
run: opscode-chef: (pid 4327) 13671s; run: log: (pid 4326) 13671s
run: opscode-erchef: (pid 5383) 5s; run: log: (pid 4382) 13669s
run: opscode-expander: (pid 4078) 13694s; run: log: (pid 4077) 13694s
run: opscode-expander-reindexer: (pid 4130) 13692s; run: log: (pid 4114) 13692s

High Availability

On back-end servers in a high availability topology, Keepalived is used by the clustering service to determine whether a service should be running. If the status subcommand is run against any of these nodes, a few things change:

  • On the back-end node that is currently the backup server, it is normal to see only one running process: Keepalived
  • On the back-end node that is currently the master server, it is normal to see all services running. It is also normal to see some services in a down state if the server, on reboot, did not attempt to start the services because Keepalived determines which services are restarted based on the state of the cluster

A sample status line for a service that is running on the master server in a high availability topology:

run: opscode-solr4: (pid 25341) 239s, normally down; run: log: (pid 5700) 145308s

Log Files

A typical status line for a service that is running any of the Chef server front-end services is similar to the following:

run: name_of_service: (pid 1486) 7819s; run: log: (pid 1485) 7819s

where:

  • run describes the state in which the supervisor attempts to keep processes. This state is either run or down. If a service is in a down state, it should be stopped
  • name_of_service is the service name, for example: opscode-solr4
  • (pid 1486) 7819s; is the process identifier followed by the amount of time (in seconds) the service has been running
  • run: log: (pid 1485) 7819s is the log process. It is typical for a log process to have a longer run time than a service; this is because the supervisor does not need to restart the log process in order to connect the supervised process

If the service is down, the status line will appear similar to the following:

down: opscode-solr4: 3s, normally up; run: log: (pid 1485) 8526s

where

  • down indicates that the service is in a down state
  • 3s, normally up; indicates that the service is normally in a run state and that the supervisor would attempt to restart this service after a reboot

stop

The stop subcommand is used to stop all services enabled on the Chef server. This command can also be run for an individual service by specifying the name of the service in the command.

This subcommand has the following syntax:

$ chef-server-ctl stop SERVICE_NAME

where SERVICE_NAME represents the name of any service that is listed after running the service-list subcommand. When a service is successfully stopped the output should be similar to:

$ ok: diwb: service_name: 0s, normally up

For example:

$ chef-server-ctl stop

will return something similar to:

ok: down: nginx: 393s, normally up
ok: down: opscode-chef: 391s, normally up
ok: down: opscode-erchef: 391s, normally up
ok: down: opscode-expander: 390s, normally up
ok: down: opscode-expander-reindexer: 389s, normally up
ok: down: opscode-solr4: 389s, normally up
ok: down: postgresql: 388s, normally up
ok: down: rabbitmq: 388s, normally up
ok: down: redis_lb: 387s, normally up

tail

The tail subcommand is used to follow all of the Chef server logs for all services. This command can also be run for an individual service by specifying the name of the service in the command.

This subcommand has the following syntax:

$ chef-server-ctl tail SERVICE_NAME

where SERVICE_NAME represents the name of any service that is listed after running the service-list subcommand.

term

The term subcommand is used to send a SIGTERM to all services. This command can also be run for an individual service by specifying the name of the service in the command.

This subcommand has the following syntax:

$ chef-server-ctl term SERVICE_NAME

where SERVICE_NAME represents the name of any service that is listed after running the service-list subcommand.

List of Services

The following services are part of the Chef server:

  • bifrost
  • bookshelf
  • keepalived
  • nginx
  • opscode-erchef
  • opscode-expander
  • opscode-solr4
  • postgresql
  • rabbitmq
  • redis-lb

bifrost

The oc_bifrost service ensures that every request to view or manage objects stored on the Chef server is authorized.

status

To view the status for the service:

$ chef-server-ctl status bifrost

to return something like:

$ run: bifrost: (pid 1234) 123456s; run: log: (pid 5678) 789012s

start

To start the service:

$ chef-server-ctl start bifrost

stop

To stop the service:

$ chef-server-ctl stop bifrost

restart

To restart the service:

$ chef-server-ctl restart bifrost

to return something like:

$ ok: run: bifrost: (pid 1234) 1234s

kill

To kill the service (send a SIGKILL command):

$ chef-server-ctl kill bifrost

run once

To run the service, but not restart it (if the service fails):

$ chef-server-ctl once bifrost

tail

To follow the logs for the service:

$ chef-server-ctl tail bifrost

bookshelf

The bookshelf service is an Amazon Simple Storage Service (S3)-compatible service that is used to store cookbooks, including all of the files—recipes, templates, and so on—that are associated with each cookbook.

status

To view the status for the service:

$ chef-server-ctl status bookshelf

to return something like:

$ run: bookshelf: (pid 1234) 123456s; run: log: (pid 5678) 789012s

start

To start the service:

$ chef-server-ctl start bookshelf

stop

To stop the service:

$ chef-server-ctl stop bookshelf

restart

To restart the service:

$ chef-server-ctl restart bookshelf

to return something like:

$ ok: run: bookshelf: (pid 1234) 1234s

kill

To kill the service (send a SIGKILL command):

$ chef-server-ctl kill bookshelf

run once

To run the service, but not restart it (if the service fails):

$ chef-server-ctl once bookshelf

tail

To follow the logs for the service:

$ chef-server-ctl tail bookshelf

keepalived

The keepalived service manages the virtual IP address (VIP) between the backend machines in a high availability topology that uses DRBD.

status

To view the status for the service:

$ chef-server-ctl status keepalived

to return something like:

$ run: keepalived: (pid 1234) 123456s; run: log: (pid 5678) 789012s

start

To start the service:

$ chef-server-ctl start keepalived

stop

To stop the service:

$ chef-server-ctl stop keepalived

restart

To restart the service:

$ chef-server-ctl restart keepalived

to return something like:

$ ok: run: keepalived: (pid 1234) 1234s

kill

To kill the service (send a SIGKILL command):

$ chef-server-ctl kill keepalived

run once

To run the service, but not restart it (if the service fails):

$ chef-server-ctl once keepalived

tail

To follow the logs for the service:

$ chef-server-ctl tail keepalived

nginx

The nginx service is used to manage traffic to the Chef server, including virtual hosts for internal and external API request/response routing, external add-on request routing, and routing between front- and back-end components.

status

To view the status for the service:

$ chef-server-ctl status nginx

to return something like:

$ run: nginx: (pid 1234) 123456s; run: log: (pid 5678) 789012s

start

To start the service:

$ chef-server-ctl start nginx

stop

To stop the service:

$ chef-server-ctl stop nginx

restart

To restart the service:

$ chef-server-ctl restart nginx

to return something like:

$ ok: run: nginx: (pid 1234) 1234s

kill

To kill the service (send a SIGKILL command):

$ chef-server-ctl kill nginx

run once

To run the service, but not restart it (if the service fails):

$ chef-server-ctl once nginx

tail

To follow the logs for the service:

$ chef-server-ctl tail nginx

opscode-erchef

The opscode-erchef service is an Erlang-based service that is used to handle Chef server API requests to the following areas within the Chef server:

  • Cookbooks
  • Data bags
  • Environments
  • Nodes
  • Roles
  • Sandboxes
  • Search

status

To view the status for the service:

$ chef-server-ctl status opscode-erchef

to return something like:

$ run: opscode-erchefs: (pid 1234) 123456s; run: log: (pid 5678) 789012s

start

To start the service:

$ chef-server-ctl start opscode-erchef

stop

To stop the service:

$ chef-server-ctl stop opscode-erchef

restart

To restart the service:

$ chef-server-ctl restart opscode-erchef

to return something like:

$ ok: run: opscode-erchef: (pid 1234) 1234s

kill

To kill the service (send a SIGKILL command):

$ chef-server-ctl kill opscode-erchef

run once

To run the service, but not restart it (if the service fails):

$ chef-server-ctl once opscode-erchef

tail

To follow the logs for the service:

$ chef-server-ctl tail opscode-erchef

opscode-expander

The opscode-expander service is used to process data (pulled from the rabbitmq service’s message queue) so that it can be properly indexed by the opscode-solr4 service.

status

To view the status for the service:

$ chef-server-ctl status opscode-expander

to return something like:

$ run: opscode-expander: (pid 1234) 123456s; run: log: (pid 5678) 789012s

start

To start the service:

$ chef-server-ctl start opscode-expander

stop

To stop the service:

$ chef-server-ctl stop opscode-expander

restart

To restart the service:

$ chef-server-ctl restart opscode-expander

to return something like:

$ ok: run: opscode-expander: (pid 1234) 1234s

kill

To kill the service (send a SIGKILL command):

$ chef-server-ctl kill opscode-expander

run once

To run the service, but not restart it (if the service fails):

$ chef-server-ctl once opscode-expander

tail

To follow the logs for the service:

$ chef-server-ctl tail opscode-expander

opscode-solr4

The opscode-solr4 service is used to create the search indexes used for searching objects like nodes, data bags, and cookbooks. (This service ensures timely search results via the Chef server API; data that is used by the Chef platform is stored in PostgreSQL.)

status

To view the status for the service:

$ chef-server-ctl status opscode-solr

to return something like:

$ run: opscode-solr: (pid 1234) 123456s; run: log: (pid 5678) 789012s

start

To start the service:

$ chef-server-ctl start opscode-solr

stop

To stop the service:

$ chef-server-ctl stop opscode-solr

restart

To restart the service:

$ chef-server-ctl restart opscode-solr

to return something like:

$ ok: run: opscode-solr: (pid 1234) 1234s

kill

To kill the service (send a SIGKILL command):

$ chef-server-ctl kill opscode-solr

run once

To run the service, but not restart it (if the service fails):

$ chef-server-ctl once opscode-solr

tail

To follow the logs for the service:

$ chef-server-ctl tail opscode-solr

postgresql

The postgresql service is used to store node, object, and user data.

status

To view the status for the service:

$ chef-server-ctl status postgresql

to return something like:

$ run: postgresql: (pid 1234) 123456s; run: log: (pid 5678) 789012s

start

To start the service:

$ chef-server-ctl start postgresql

stop

To stop the service:

$ chef-server-ctl stop postgresql

restart

To restart the service:

$ chef-server-ctl restart postgresql

to return something like:

$ ok: run: postgresql: (pid 1234) 1234s

kill

To kill the service (send a SIGKILL command):

$ chef-server-ctl kill postgresql

run once

To run the service, but not restart it (if the service fails):

$ chef-server-ctl once postgresqls

tail

To follow the logs for the service:

$ chef-server-ctl tail postgresql

rabbitmq

The rabbitmq service is used to provide the message queue that is used by the Chef server to get search data to Apache Solr so that it can be indexed for search. When Chef Analytics is confiugred, the rabbitmq service is also used to send data from the Chef server to the Chef Analytics server.

status

To view the status for the service:

$ chef-server-ctl status rabbitmq

to return something like:

$ run: rabbitmq: (pid 1234) 123456s; run: log: (pid 5678) 789012s

start

To start the service:

$ chef-server-ctl start rabbitmq

stop

To stop the service:

$ chef-server-ctl stop rabbitmq

restart

To restart the service:

$ chef-server-ctl restart rabbitmq

to return something like:

$ ok: run: rabbitmq: (pid 1234) 1234s

kill

To kill the service (send a SIGKILL command):

$ chef-server-ctl kill rabbitmq

run once

To run the service, but not restart it (if the service fails):

$ chef-server-ctl once rabbitmq

tail

To follow the logs for the service:

$ chef-server-ctl tail rabbitmq

redis

Key-value store used in conjunction with Nginx to route requests and populate request data used by the Chef server.

status

To view the status for the service:

$ chef-server-ctl status redis

to return something like:

$ run: redis: (pid 1234) 123456s; run: log: (pid 5678) 789012s

start

To start the service:

$ chef-server-ctl start redis

stop

To stop the service:

$ chef-server-ctl stop redis

restart

To restart the service:

$ chef-server-ctl restart redis

to return something like:

$ ok: run: redis: (pid 1234) 1234s

kill

To kill the service (send a SIGKILL command):

$ chef-server-ctl kill name_of_service

run once

To run the service, but not restart it (if the service fails):

$ chef-server-ctl once redis

tail

To follow the logs for the service:

$ chef-server-ctl tail name_of_service

© Chef Software, Inc.
Licensed under the Creative Commons Attribution 3.0 Unported License.
The Chef™ Mark and Chef Logo are either registered trademarks/service marks or trademarks/servicemarks of Chef, in the United States and other countries and are used with Chef Inc's permission.
We are not affiliated with, endorsed or sponsored by Chef Inc.
https://docs-archive.chef.io/release/server_12-8/server_services.html