file

File manipulation command.

Synopsis

Reading
  file(READ <filename> <out-var> [...])
  file(STRINGS <filename> <out-var> [...])
  file(<HASH> <filename> <out-var>)
  file(TIMESTAMP <filename> <out-var> [...])
  file(GET_RUNTIME_DEPENDENCIES [...])

Writing
  file({WRITE | APPEND} <filename> <content>...)
  file({TOUCH | TOUCH_NOCREATE} [<file>...])
  file(GENERATE OUTPUT <output-file> [...])

Filesystem
  file({GLOB | GLOB_RECURSE} <out-var> [...] [<globbing-expr>...])
  file(RENAME <oldname> <newname>)
  file({REMOVE | REMOVE_RECURSE } [<files>...])
  file(MAKE_DIRECTORY [<dir>...])
  file({COPY | INSTALL} <file>... DESTINATION <dir> [...])
  file(SIZE <filename> <out-var>)
  file(READ_SYMLINK <linkname> <out-var>)
  file(CREATE_LINK <original> <linkname> [...])

Path Conversion
  file(RELATIVE_PATH <out-var> <directory> <file>)
  file({TO_CMAKE_PATH | TO_NATIVE_PATH} <path> <out-var>)

Transfer
  file(DOWNLOAD <url> <file> [...])
  file(UPLOAD <file> <url> [...])

Locking
  file(LOCK <path> [...])

Reading

file(READ <filename> <variable>
     [OFFSET <offset>] [LIMIT <max-in>] [HEX])

Read content from a file called <filename> and store it in a <variable>. Optionally start from the given <offset> and read at most <max-in> bytes. The HEX option causes data to be converted to a hexadecimal representation (useful for binary data).

file(STRINGS <filename> <variable> [<options>...])

Parse a list of ASCII strings from <filename> and store it in <variable>. Binary data in the file are ignored. Carriage return (\r, CR) characters are ignored. The options are:

LENGTH_MAXIMUM <max-len>

Consider only strings of at most a given length.

LENGTH_MINIMUM <min-len>

Consider only strings of at least a given length.

LIMIT_COUNT <max-num>

Limit the number of distinct strings to be extracted.

LIMIT_INPUT <max-in>

Limit the number of input bytes to read from the file.

LIMIT_OUTPUT <max-out>

Limit the number of total bytes to store in the <variable>.

NEWLINE_CONSUME

Treat newline characters (\n, LF) as part of string content instead of terminating at them.

NO_HEX_CONVERSION

Intel Hex and Motorola S-record files are automatically converted to binary while reading unless this option is given.

REGEX <regex>

Consider only strings that match the given regular expression.

ENCODING <encoding-type>

Consider strings of a given encoding. Currently supported encodings are: UTF-8, UTF-16LE, UTF-16BE, UTF-32LE, UTF-32BE. If the ENCODING option is not provided and the file has a Byte Order Mark, the ENCODING option will be defaulted to respect the Byte Order Mark.

For example, the code

file(STRINGS myfile.txt myfile)

stores a list in the variable myfile in which each item is a line from the input file.

file(<HASH> <filename> <variable>)

Compute a cryptographic hash of the content of <filename> and store it in a <variable>. The supported <HASH> algorithm names are those listed by the string(<HASH>) command.

file(TIMESTAMP <filename> <variable> [<format>] [UTC])

Compute a string representation of the modification time of <filename> and store it in <variable>. Should the command be unable to obtain a timestamp variable will be set to the empty string (“”).

See the string(TIMESTAMP) command for documentation of the <format> and UTC options.

file(GET_RUNTIME_DEPENDENCIES
  [RESOLVED_DEPENDENCIES_VAR <deps_var>]
  [UNRESOLVED_DEPENDENCIES_VAR <unresolved_deps_var>]
  [CONFLICTING_DEPENDENCIES_PREFIX <conflicting_deps_prefix>]
  [EXECUTABLES [<executable_files>...]]
  [LIBRARIES [<library_files>...]]
  [MODULES [<module_files>...]]
  [DIRECTORIES [<directories>...]]
  [BUNDLE_EXECUTABLE <bundle_executable_file>]
  [PRE_INCLUDE_REGEXES [<regexes>...]]
  [PRE_EXCLUDE_REGEXES [<regexes>...]]
  [POST_INCLUDE_REGEXES [<regexes>...]]
  [POST_EXCLUDE_REGEXES [<regexes>...]]
  )

Recursively get the list of libraries depended on by the given files.

Please note that this sub-command is not intended to be used in project mode. Instead, use it in an install(CODE) or install(SCRIPT) block. For example:

install(CODE [[
  file(GET_RUNTIME_DEPENDENCIES
    # ...
    )
  ]])

The arguments are as follows:

RESOLVED_DEPENDENCIES_VAR <deps_var>

Name of the variable in which to store the list of resolved dependencies.

UNRESOLVED_DEPENDENCIES_VAR <unresolved_deps_var>

Name of the variable in which to store the list of unresolved dependencies. If this variable is not specified, and there are any unresolved dependencies, an error is issued.

CONFLICTING_DEPENDENCIES_PREFIX <conflicting_deps_prefix>

Variable prefix in which to store conflicting dependency information. Dependencies are conflicting if two files with the same name are found in two different directories. The list of filenames that conflict are stored in <conflicting_deps_prefix>_FILENAMES. For each filename, the list of paths that were found for that filename are stored in <conflicting_deps_prefix>_<filename>.

EXECUTABLES <executable_files>

List of executable files to read for dependencies. These are executables that are typically created with add_executable(), but they do not have to be created by CMake. On Apple platforms, the paths to these files determine the value of @executable_path when recursively resolving the libraries. Specifying any kind of library (STATIC, MODULE, or SHARED) here will result in undefined behavior.

LIBRARIES <library_files>

List of library files to read for dependencies. These are libraries that are typically created with add_library(SHARED), but they do not have to be created by CMake. Specifying STATIC libraries, MODULE libraries, or executables here will result in undefined behavior.

MODULES <module_files>

List of loadable module files to read for dependencies. These are modules that are typically created with add_library(MODULE), but they do not have to be created by CMake. They are typically used by calling dlopen() at runtime rather than linked at link time with ld -l. Specifying STATIC libraries, SHARED libraries, or executables here will result in undefined behavior.

DIRECTORIES <directories>

List of additional directories to search for dependencies. On Linux platforms, these directories are searched if the dependency is not found in any of the other usual paths. If it is found in such a directory, a warning is issued, because it means that the file is incomplete (it does not list all of the directories that contain its dependencies). On Windows platforms, these directories are searched if the dependency is not found in any of the other search paths, but no warning is issued, because searching other paths is a normal part of Windows dependency resolution. On Apple platforms, this argument has no effect.

BUNDLE_EXECUTABLE <bundle_executable_file>

Executable to treat as the “bundle executable” when resolving libraries. On Apple platforms, this argument determines the value of @executable_path when recursively resolving libraries for LIBRARIES and MODULES files. It has no effect on EXECUTABLES files. On other platforms, it has no effect. This is typically (but not always) one of the executables in the EXECUTABLES argument which designates the “main” executable of the package.

The following arguments specify filters for including or excluding libraries to be resolved. See below for a full description of how they work.

PRE_INCLUDE_REGEXES <regexes>

List of pre-include regexes through which to filter the names of not-yet-resolved dependencies.

PRE_EXCLUDE_REGEXES <regexes>

List of pre-exclude regexes through which to filter the names of not-yet-resolved dependencies.

POST_INCLUDE_REGEXES <regexes>

List of post-include regexes through which to filter the names of resolved dependencies.

POST_EXCLUDE_REGEXES <regexes>

List of post-exclude regexes through which to filter the names of resolved dependencies.

These arguments can be used to blacklist unwanted system libraries when resolving the dependencies, or to whitelist libraries from a specific directory. The filtering works as follows:

  1. If the not-yet-resolved dependency matches any of the PRE_INCLUDE_REGEXES, steps 2 and 3 are skipped, and the dependency resolution proceeds to step 4.
  2. If the not-yet-resolved dependency matches any of the PRE_EXCLUDE_REGEXES, dependency resolution stops for that dependency.
  3. Otherwise, dependency resolution proceeds.
  4. file(GET_RUNTIME_DEPENDENCIES) searches for the dependency according to the linking rules of the platform (see below).
  5. If the dependency is found, and its full path matches one of the POST_INCLUDE_REGEXES, the full path is added to the resolved dependencies, and file(GET_RUNTIME_DEPENDENCIES) recursively resolves that library’s own dependencies. Otherwise, resolution proceeds to step 6.
  6. If the dependency is found, but its full path matches one of the POST_EXCLUDE_REGEXES, it is not added to the resolved dependencies, and dependency resolution stops for that dependency.
  7. If the dependency is found, and its full path does not match either POST_INCLUDE_REGEXES or POST_EXCLUDE_REGEXES, the full path is added to the resolved dependencies, and file(GET_RUNTIME_DEPENDENCIES) recursively resolves that library’s own dependencies.

Different platforms have different rules for how dependencies are resolved. These specifics are described here.

On Linux platforms, library resolution works as follows:

  1. If the depending file does not have any RUNPATH entries, and the library exists in one of the depending file’s RPATH entries, or its parents’, in that order, the dependency is resolved to that file.
  2. Otherwise, if the depending file has any RUNPATH entries, and the library exists in one of those entries, the dependency is resolved to that file.
  3. Otherwise, if the library exists in one of the directories listed by ldconfig, the dependency is resolved to that file.
  4. Otherwise, if the library exists in one of the DIRECTORIES entries, the dependency is resolved to that file. In this case, a warning is issued, because finding a file in one of the DIRECTORIES means that the depending file is not complete (it does not list all the directories from which it pulls dependencies).
  5. Otherwise, the dependency is unresolved.

On Windows platforms, library resolution works as follows:

  1. The dependent DLL name is converted to lowercase. Windows DLL names are case-insensitive, and some linkers mangle the case of the DLL dependency names. However, this makes it more difficult for PRE_INCLUDE_REGEXES, PRE_EXCLUDE_REGEXES, POST_INCLUDE_REGEXES, and POST_EXCLUDE_REGEXES to properly filter DLL names - every regex would have to check for both uppercase and lowercase letters. For example:

    file(GET_RUNTIME_DEPENDENCIES
      # ...
      PRE_INCLUDE_REGEXES "^[Mm][Yy][Ll][Ii][Bb][Rr][Aa][Rr][Yy]\\.[Dd][Ll][Ll]$"
      )
    

    Converting the DLL name to lowercase allows the regexes to only match lowercase names, thus simplifying the regex. For example:

    file(GET_RUNTIME_DEPENDENCIES
      # ...
      PRE_INCLUDE_REGEXES "^mylibrary\\.dll$"
      )
    

    This regex will match mylibrary.dll regardless of how it is cased, either on disk or in the depending file. (For example, it will match mylibrary.dll, MyLibrary.dll, and MYLIBRARY.DLL.)

    Please note that the directory portion of any resolved DLLs retains its casing and is not converted to lowercase. Only the filename portion is converted.

  2. (Not yet implemented) If the depending file is a Windows Store app, and the dependency is listed as a dependency in the application’s package manifest, the dependency is resolved to that file.
  3. Otherwise, if the library exists in the same directory as the depending file, the dependency is resolved to that file.
  4. Otherwise, if the library exists in either the operating system’s system32 directory or the Windows directory, in that order, the dependency is resolved to that file.
  5. Otherwise, if the library exists in one of the directories specified by DIRECTORIES, in the order they are listed, the dependency is resolved to that file. In this case, a warning is not issued, because searching other directories is a normal part of Windows library resolution.
  6. Otherwise, the dependency is unresolved.

On Apple platforms, library resolution works as follows:

  1. If the dependency starts with @executable_path/, and an EXECUTABLES argument is in the process of being resolved, and replacing @executable_path/ with the directory of the executable yields an existing file, the dependency is resolved to that file.
  2. Otherwise, if the dependency starts with @executable_path/, and there is a BUNDLE_EXECUTABLE argument, and replacing @executable_path/ with the directory of the bundle executable yields an existing file, the dependency is resolved to that file.
  3. Otherwise, if the dependency starts with @loader_path/, and replacing @loader_path/ with the directory of the depending file yields an existing file, the dependency is resolved to that file.
  4. Otherwise, if the dependency starts with @rpath/, and replacing @rpath/ with one of the RPATH entries of the depending file yields an existing file, the dependency is resolved to that file. Note that RPATH entries that start with @executable_path/ or @loader_path/ also have these items replaced with the appropriate path.
  5. Otherwise, if the dependency is an absolute file that exists, the dependency is resolved to that file.
  6. Otherwise, the dependency is unresolved.

This function accepts several variables that determine which tool is used for dependency resolution:

CMAKE_GET_RUNTIME_DEPENDENCIES_PLATFORM

Determines which operating system and executable format the files are built for. This could be one of several values:

  • linux+elf
  • windows+pe
  • macos+macho

If this variable is not specified, it is determined automatically by system introspection.

CMAKE_GET_RUNTIME_DEPENDENCIES_TOOL

Determines the tool to use for dependency resolution. It could be one of several values, depending on the value of CMAKE_GET_RUNTIME_DEPENDENCIES_PLATFORM:

CMAKE_GET_RUNTIME_DEPENDENCIES_PLATFORM

CMAKE_GET_RUNTIME_DEPENDENCIES_TOOL

linux+elf

objdump

windows+pe

dumpbin

windows+pe

objdump

macos+macho

otool

If this variable is not specified, it is determined automatically by system introspection.

CMAKE_GET_RUNTIME_DEPENDENCIES_COMMAND

Determines the path to the tool to use for dependency resolution. This is the actual path to objdump, dumpbin, or otool.

If this variable is not specified, it is determined automatically by system introspection.

Writing

file(WRITE <filename> <content>...)
file(APPEND <filename> <content>...)

Write <content> into a file called <filename>. If the file does not exist, it will be created. If the file already exists, WRITE mode will overwrite it and APPEND mode will append to the end. Any directories in the path specified by <filename> that do not exist will be created.

If the file is a build input, use the configure_file() command to update the file only when its content changes.

file(TOUCH [<files>...])
file(TOUCH_NOCREATE [<files>...])

Create a file with no content if it does not yet exist. If the file already exists, its access and/or modification will be updated to the time when the function call is executed.

Use TOUCH_NOCREATE to touch a file if it exists but not create it. If a file does not exist it will be silently ignored.

With TOUCH and TOUCH_NOCREATE the contents of an existing file will not be modified.

file(GENERATE OUTPUT output-file
     <INPUT input-file|CONTENT content>
     [CONDITION expression])

Generate an output file for each build configuration supported by the current CMake Generator. Evaluate generator expressions from the input content to produce the output content. The options are:

CONDITION <condition>

Generate the output file for a particular configuration only if the condition is true. The condition must be either 0 or 1 after evaluating generator expressions.

CONTENT <content>

Use the content given explicitly as input.

INPUT <input-file>

Use the content from a given file as input. A relative path is treated with respect to the value of CMAKE_CURRENT_SOURCE_DIR. See policy CMP0070.

OUTPUT <output-file>

Specify the output file name to generate. Use generator expressions such as $<CONFIG> to specify a configuration-specific output file name. Multiple configurations may generate the same output file only if the generated content is identical. Otherwise, the <output-file> must evaluate to an unique name for each configuration. A relative path (after evaluating generator expressions) is treated with respect to the value of CMAKE_CURRENT_BINARY_DIR. See policy CMP0070.

Exactly one CONTENT or INPUT option must be given. A specific OUTPUT file may be named by at most one invocation of file(GENERATE). Generated files are modified and their timestamp updated on subsequent cmake runs only if their content is changed.

Note also that file(GENERATE) does not create the output file until the generation phase. The output file will not yet have been written when the file(GENERATE) command returns, it is written only after processing all of a project’s CMakeLists.txt files.

Filesystem

file(GLOB <variable>
     [LIST_DIRECTORIES true|false] [RELATIVE <path>] [CONFIGURE_DEPENDS]
     [<globbing-expressions>...])
file(GLOB_RECURSE <variable> [FOLLOW_SYMLINKS]
     [LIST_DIRECTORIES true|false] [RELATIVE <path>] [CONFIGURE_DEPENDS]
     [<globbing-expressions>...])

Generate a list of files that match the <globbing-expressions> and store it into the <variable>. Globbing expressions are similar to regular expressions, but much simpler. If RELATIVE flag is specified, the results will be returned as relative paths to the given path. The results will be ordered lexicographically.

On Windows and macOS, globbing is case-insensitive even if the underlying filesystem is case-sensitive (both filenames and globbing expressions are converted to lowercase before matching). On other platforms, globbing is case-sensitive.

If the CONFIGURE_DEPENDS flag is specified, CMake will add logic to the main build system check target to rerun the flagged GLOB commands at build time. If any of the outputs change, CMake will regenerate the build system.

By default GLOB lists directories - directories are omitted in result if LIST_DIRECTORIES is set to false.

Note

We do not recommend using GLOB to collect a list of source files from your source tree. If no CMakeLists.txt file changes when a source is added or removed then the generated build system cannot know when to ask CMake to regenerate. The CONFIGURE_DEPENDS flag may not work reliably on all generators, or if a new generator is added in the future that cannot support it, projects using it will be stuck. Even if CONFIGURE_DEPENDS works reliably, there is still a cost to perform the check on every rebuild.

Examples of globbing expressions include:

*.cxx      - match all files with extension cxx
*.vt?      - match all files with extension vta,...,vtz
f[3-5].txt - match files f3.txt, f4.txt, f5.txt

The GLOB_RECURSE mode will traverse all the subdirectories of the matched directory and match the files. Subdirectories that are symlinks are only traversed if FOLLOW_SYMLINKS is given or policy CMP0009 is not set to NEW.

By default GLOB_RECURSE omits directories from result list - setting LIST_DIRECTORIES to true adds directories to result list. If FOLLOW_SYMLINKS is given or policy CMP0009 is not set to NEW then LIST_DIRECTORIES treats symlinks as directories.

Examples of recursive globbing include:

/dir/*.py  - match all python files in /dir and subdirectories
file(RENAME <oldname> <newname>)

Move a file or directory within a filesystem from <oldname> to <newname>, replacing the destination atomically.

file(REMOVE [<files>...])
file(REMOVE_RECURSE [<files>...])

Remove the given files. The REMOVE_RECURSE mode will remove the given files and directories, also non-empty directories. No error is emitted if a given file does not exist. Relative input paths are evaluated with respect to the current source directory. Empty input paths are ignored with a warning.

file(MAKE_DIRECTORY [<directories>...])

Create the given directories and their parents as needed.

file(<COPY|INSTALL> <files>... DESTINATION <dir>
     [FILE_PERMISSIONS <permissions>...]
     [DIRECTORY_PERMISSIONS <permissions>...]
     [NO_SOURCE_PERMISSIONS] [USE_SOURCE_PERMISSIONS]
     [FOLLOW_SYMLINK_CHAIN]
     [FILES_MATCHING]
     [[PATTERN <pattern> | REGEX <regex>]
      [EXCLUDE] [PERMISSIONS <permissions>...]] [...])

The COPY signature copies files, directories, and symlinks to a destination folder. Relative input paths are evaluated with respect to the current source directory, and a relative destination is evaluated with respect to the current build directory. Copying preserves input file timestamps, and optimizes out a file if it exists at the destination with the same timestamp. Copying preserves input permissions unless explicit permissions or NO_SOURCE_PERMISSIONS are given (default is USE_SOURCE_PERMISSIONS).

If FOLLOW_SYMLINK_CHAIN is specified, COPY will recursively resolve the symlinks at the paths given until a real file is found, and install a corresponding symlink in the destination for each symlink encountered. For each symlink that is installed, the resolution is stripped of the directory, leaving only the filename, meaning that the new symlink points to a file in the same directory as the symlink. This feature is useful on some Unix systems, where libraries are installed as a chain of symlinks with version numbers, with less specific versions pointing to more specific versions. FOLLOW_SYMLINK_CHAIN will install all of these symlinks and the library itself into the destination directory. For example, if you have the following directory structure:

  • /opt/foo/lib/libfoo.so.1.2.3
  • /opt/foo/lib/libfoo.so.1.2 -> libfoo.so.1.2.3
  • /opt/foo/lib/libfoo.so.1 -> libfoo.so.1.2
  • /opt/foo/lib/libfoo.so -> libfoo.so.1

and you do:

file(COPY /opt/foo/lib/libfoo.so DESTINATION lib FOLLOW_SYMLINK_CHAIN)

This will install all of the symlinks and libfoo.so.1.2.3 itself into lib.

See the install(DIRECTORY) command for documentation of permissions, FILES_MATCHING, PATTERN, REGEX, and EXCLUDE options. Copying directories preserves the structure of their content even if options are used to select a subset of files.

The INSTALL signature differs slightly from COPY: it prints status messages (subject to the CMAKE_INSTALL_MESSAGE variable), and NO_SOURCE_PERMISSIONS is default. Installation scripts generated by the install() command use this signature (with some undocumented options for internal use).

file(SIZE <filename> <variable>)

Determine the file size of the <filename> and put the result in <variable> variable. Requires that <filename> is a valid path pointing to a file and is readable.

file(READ_SYMLINK <linkname> <variable>)

This subcommand queries the symlink <linkname> and stores the path it points to in the result <variable>. If <linkname> does not exist or is not a symlink, CMake issues a fatal error.

Note that this command returns the raw symlink path and does not resolve a relative path. The following is an example of how to ensure that an absolute path is obtained:

set(linkname "/path/to/foo.sym")
file(READ_SYMLINK "${linkname}" result)
if(NOT IS_ABSOLUTE "${result}")
  get_filename_component(dir "${linkname}" DIRECTORY)
  set(result "${dir}/${result}")
endif()
file(CREATE_LINK <original> <linkname>
     [RESULT <result>] [COPY_ON_ERROR] [SYMBOLIC])

Create a link <linkname> that points to <original>. It will be a hard link by default, but providing the SYMBOLIC option results in a symbolic link instead. Hard links require that original exists and is a file, not a directory. If <linkname> already exists, it will be overwritten.

The <result> variable, if specified, receives the status of the operation. It is set to 0 upon success or an error message otherwise. If RESULT is not specified and the operation fails, a fatal error is emitted.

Specifying COPY_ON_ERROR enables copying the file as a fallback if creating the link fails. It can be useful for handling situations such as <original> and <linkname> being on different drives or mount points, which would make them unable to support a hard link.

Path Conversion

file(RELATIVE_PATH <variable> <directory> <file>)

Compute the relative path from a <directory> to a <file> and store it in the <variable>.

file(TO_CMAKE_PATH "<path>" <variable>)
file(TO_NATIVE_PATH "<path>" <variable>)

The TO_CMAKE_PATH mode converts a native <path> into a cmake-style path with forward-slashes (/). The input can be a single path or a system search path like $ENV{PATH}. A search path will be converted to a cmake-style list separated by ; characters.

The TO_NATIVE_PATH mode converts a cmake-style <path> into a native path with platform-specific slashes (\ on Windows and / elsewhere).

Always use double quotes around the <path> to be sure it is treated as a single argument to this command.

Transfer

file(DOWNLOAD <url> <file> [<options>...])
file(UPLOAD   <file> <url> [<options>...])

The DOWNLOAD mode downloads the given <url> to a local <file>. The UPLOAD mode uploads a local <file> to a given <url>.

Options to both DOWNLOAD and UPLOAD are:

INACTIVITY_TIMEOUT <seconds>

Terminate the operation after a period of inactivity.

LOG <variable>

Store a human-readable log of the operation in a variable.

SHOW_PROGRESS

Print progress information as status messages until the operation is complete.

STATUS <variable>

Store the resulting status of the operation in a variable. The status is a ; separated list of length 2. The first element is the numeric return value for the operation, and the second element is a string value for the error. A 0 numeric error means no error in the operation.

TIMEOUT <seconds>

Terminate the operation after a given total time has elapsed.

USERPWD <username>:<password>

Set username and password for operation.

HTTPHEADER <HTTP-header>

HTTP header for operation. Suboption can be repeated several times.

NETRC <level>

Specify whether the .netrc file is to be used for operation. If this option is not specified, the value of the CMAKE_NETRC variable will be used instead. Valid levels are:

IGNORED

The .netrc file is ignored. This is the default.

OPTIONAL

The .netrc file is optional, and information in the URL is preferred. The file will be scanned to find which ever information is not specified in the URL.

REQUIRED

The .netrc file is required, and information in the URL is ignored.

NETRC_FILE <file>

Specify an alternative .netrc file to the one in your home directory, if the NETRC level is OPTIONAL or REQUIRED. If this option is not specified, the value of the CMAKE_NETRC_FILE variable will be used instead.

If neither NETRC option is given CMake will check variables CMAKE_NETRC and CMAKE_NETRC_FILE, respectively.

Additional options to DOWNLOAD are:

EXPECTED_HASH ALGO=<value>

Verify that the downloaded content hash matches the expected value, where ALGO is one of the algorithms supported by file(<HASH>). If it does not match, the operation fails with an error.

EXPECTED_MD5 <value>

Historical short-hand for EXPECTED_HASH MD5=<value>.

TLS_VERIFY <ON|OFF>

Specify whether to verify the server certificate for https:// URLs. The default is to not verify.

TLS_CAINFO <file>

Specify a custom Certificate Authority file for https:// URLs.

For https:// URLs CMake must be built with OpenSSL support. TLS/SSL certificates are not checked by default. Set TLS_VERIFY to ON to check certificates and/or use EXPECTED_HASH to verify downloaded content. If neither TLS option is given CMake will check variables CMAKE_TLS_VERIFY and CMAKE_TLS_CAINFO, respectively.

Locking

file(LOCK <path> [DIRECTORY] [RELEASE]
     [GUARD <FUNCTION|FILE|PROCESS>]
     [RESULT_VARIABLE <variable>]
     [TIMEOUT <seconds>])

Lock a file specified by <path> if no DIRECTORY option present and file <path>/cmake.lock otherwise. File will be locked for scope defined by GUARD option (default value is PROCESS). RELEASE option can be used to unlock file explicitly. If option TIMEOUT is not specified CMake will wait until lock succeed or until fatal error occurs. If TIMEOUT is set to 0 lock will be tried once and result will be reported immediately. If TIMEOUT is not 0 CMake will try to lock file for the period specified by <seconds> value. Any errors will be interpreted as fatal if there is no RESULT_VARIABLE option. Otherwise result will be stored in <variable> and will be 0 on success or error message on failure.

Note that lock is advisory - there is no guarantee that other processes will respect this lock, i.e. lock synchronize two or more CMake instances sharing some modifiable resources. Similar logic applied to DIRECTORY option - locking parent directory doesn’t prevent other LOCK commands to lock any child directory or file.

Trying to lock file twice is not allowed. Any intermediate directories and file itself will be created if they not exist. GUARD and TIMEOUT options ignored on RELEASE operation.

© 2000–2020 Kitware, Inc. and Contributors
Licensed under the BSD 3-clause License.
https://cmake.org/cmake/help/v3.17/command/file.html