Map

A set of functions for working with maps.

Many functions for maps, which implement the Enumerable protocol, are found in the Enum module. Additionally, the following functions for maps are found in Kernel:

Maps are the “go to” key-value data structure in Elixir. Maps can be created with the %{} syntax, and key-value pairs can be expressed as key => value:

iex> %{}
%{}
iex> %{"one" => :two, 3 => "four"}
%{3 => "four", "one" => :two}

Key-value pairs in a map do not follow any order (that’s why the printed map in the example above has a different order than the map that was created).

Maps do not impose any restriction on the key type: anything can be a key in a map. As a key-value structure, maps do not allow duplicated keys. Keys are compared using the exact-equality operator (===/2). If colliding keys are defined in a map literal, the last one prevails.

When the key in a key-value pair is an atom, the key: value shorthand syntax can be used (as in many other special forms), provided key-value pairs are put at the end:

iex> %{"hello" => "world", a: 1, b: 2}
%{:a => 1, :b => 2, "hello" => "world"}

Keys in maps can be accessed through some of the functions in this module (such as Map.get/3 or Map.fetch/2) or through the map[] syntax provided by the Access module:

iex> map = %{a: 1, b: 2}
iex> Map.fetch(map, :a)
{:ok, 1}
iex> map[:b]
2
iex> map["non_existing_key"]
nil

For accessing atom keys, one may also map.key. Note that while map[key] will return nil if map doesn’t contain key, map.key will raise if map doesn’t contain the key :key.

iex> map = %{foo: "bar", baz: "bong"}
iex> map.foo
"bar"
iex> map.non_existing_key
** (KeyError) key :non_existing_key not found in: %{baz: "bong", foo: "bar"}

The two syntaxes for accessing keys reveal the dual nature of maps. The map[key] syntax is used for dynamically created maps that may have any key, of any type. map.key is used with maps that hold a predetermined set of atoms keys, which are expected to always be present. Structs, defined via defstruct/1, are one example of such “static maps”, where the keys can also be checked during compile time.

Maps can be pattern matched on. When a map is on the left-hand side of a pattern match, it will match if the map on the right-hand side contains the keys on the left-hand side and their values match the ones on the left-hand side. This means that an empty map matches every map.

iex> %{} = %{foo: "bar"}
%{foo: "bar"}
iex> %{a: a} = %{:a => 1, "b" => 2, [:c, :e, :e] => 3}
iex> a
1
iex> %{:c => 3} = %{:a => 1, 2 => :b}
** (MatchError) no match of right hand side value: %{2 => :b, :a => 1}

Variables can be used as map keys both when writing map literals as well as when matching:

iex> n = 1
1
iex> %{n => :one}
%{1 => :one}
iex> %{^n => :one} = %{1 => :one, 2 => :two, 3 => :three}
%{1 => :one, 2 => :two, 3 => :three}

Maps also support a specific update syntax to update the value stored under existing atom keys:

iex> map = %{one: 1, two: 2}
iex> %{map | one: "one"}
%{one: "one", two: 2}
iex> %{map | three: 3}
** (KeyError) key :three not found

Summary

Types

key()
value()

Functions

delete(map, key)

Deletes the entry in map for a specific key

drop(map, keys)

Drops the given keys from map

equal?(map1, map2)

Checks if two maps are equal

fetch!(map, key)

Fetches the value for a specific key in the given map, erroring out if map doesn’t contain key

fetch(map, key)

Fetches the value for a specific key in the given map

from_struct(struct)

Converts a struct to map

get(map, key, default \\ nil)

Gets the value for a specific key in map

get_and_update!(map, key, fun)

Gets the value from key and updates it. Raises if there is no key

get_and_update(map, key, fun)

Gets the value from key and updates it, all in one pass

get_lazy(map, key, fun)

Gets the value for a specific key in map

has_key?(map, key)

Returns whether the given key exists in the given map

keys(map)

Returns all keys from map

merge(map1, map2)

Merges two maps into one

merge(map1, map2, fun)

Merges two maps into one, resolving conflicts through the given fun

new()

Returns a new empty map

new(enumerable)

Creates a map from an enumerable

new(enumerable, transform)

Creates a map from an enumerable via the given transformation function

pop(map, key, default \\ nil)

Returns and removes the value associated with key in map

pop_lazy(map, key, fun)

Lazily returns and removes the value associated with key in map

put(map, key, value)

Puts the given value under key in map

put_new(map, key, value)

Puts the given value under key unless the entry key already exists in map

put_new_lazy(map, key, fun)

Evaluates fun and puts the result under key in map unless key is already present

replace!(map, key, value)

Alters the value stored under key to value, but only if the entry key already exists in map

split(map, keys)

Takes all entries corresponding to the given keys in map and extracts them into a separate map

take(map, keys)

Returns a new map with all the key-value pairs in map where the key is in keys

to_list(map)

Converts map to a list

update!(map, key, fun)

Updates key with the given function

update(map, key, initial, fun)

Updates the key in map with the given function

values(map)

Returns all values from map

Types

key()

key() :: any()

value()

value() :: any()

Functions

delete(map, key)

delete(map(), key()) :: map()

Deletes the entry in map for a specific key.

If the key does not exist, returns map unchanged.

Inlined by the compiler.

Examples

iex> Map.delete(%{a: 1, b: 2}, :a)
%{b: 2}
iex> Map.delete(%{b: 2}, :a)
%{b: 2}

drop(map, keys)

drop(map(), Enumerable.t()) :: map()

Drops the given keys from map.

If keys contains keys that are not in map, they’re simply ignored.

Examples

iex> Map.drop(%{a: 1, b: 2, c: 3}, [:b, :d])
%{a: 1, c: 3}

equal?(map1, map2)

equal?(map(), map()) :: boolean()

Checks if two maps are equal.

Two maps are considered to be equal if they contain the same keys and those keys contain the same values.

Examples

iex> Map.equal?(%{a: 1, b: 2}, %{b: 2, a: 1})
true
iex> Map.equal?(%{a: 1, b: 2}, %{b: 1, a: 2})
false

fetch!(map, key)

fetch!(map(), key()) :: value() | no_return()

Fetches the value for a specific key in the given map, erroring out if map doesn’t contain key.

If map contains the given key, the corresponding value is returned. If map doesn’t contain key, a KeyError exception is raised.

Inlined by the compiler.

Examples

iex> Map.fetch!(%{a: 1}, :a)
1
iex> Map.fetch!(%{a: 1}, :b)
** (KeyError) key :b not found in: %{a: 1}

fetch(map, key)

fetch(map(), key()) :: {:ok, value()} | :error

Fetches the value for a specific key in the given map.

If map contains the given key with value value, then {:ok, value} is returned. If map doesn’t contain key, :error is returned.

Inlined by the compiler.

Examples

iex> Map.fetch(%{a: 1}, :a)
{:ok, 1}
iex> Map.fetch(%{a: 1}, :b)
:error

from_struct(struct)

from_struct(atom() | struct()) :: map()

Converts a struct to map.

It accepts the struct module or a struct itself and simply removes the __struct__ field from the given struct or from a new struct generated from the given module.

Example

defmodule User do
  defstruct [:name]
end

Map.from_struct(User)
#=> %{name: nil}

Map.from_struct(%User{name: "john"})
#=> %{name: "john"}

get(map, key, default \\ nil)

get(map(), key(), value()) :: value()

Gets the value for a specific key in map.

If key is present in map with value value, then value is returned. Otherwise, default is returned (which is nil unless specified otherwise).

Examples

iex> Map.get(%{}, :a)
nil
iex> Map.get(%{a: 1}, :a)
1
iex> Map.get(%{a: 1}, :b)
nil
iex> Map.get(%{a: 1}, :b, 3)
3

get_and_update!(map, key, fun)

get_and_update!(map(), key(), (value() -> {get, value()} | :pop)) ::
  {get, map()} | no_return()
when get: term()

Gets the value from key and updates it. Raises if there is no key.

Behaves exactly like get_and_update/3, but raises a KeyError exception if key is not present in map.

Examples

iex> Map.get_and_update!(%{a: 1}, :a, fn current_value ->
...>   {current_value, "new value!"}
...> end)
{1, %{a: "new value!"}}

iex> Map.get_and_update!(%{a: 1}, :b, fn current_value ->
...>   {current_value, "new value!"}
...> end)
** (KeyError) key :b not found in: %{a: 1}

iex> Map.get_and_update!(%{a: 1}, :a, fn _ ->
...>   :pop
...> end)
{1, %{}}

get_and_update(map, key, fun)

get_and_update(map(), key(), (value() -> {get, value()} | :pop)) ::
  {get, map()}
when get: term()

Gets the value from key and updates it, all in one pass.

fun is called with the current value under key in map (or nil if key is not present in map) and must return a two-element tuple: the “get” value (the retrieved value, which can be operated on before being returned) and the new value to be stored under key in the resulting new map. fun may also return :pop, which means the current value shall be removed from map and returned (making this function behave like Map.pop(map, key)).

The returned value is a tuple with the “get” value returned by fun and a new map with the updated value under key.

Examples

iex> Map.get_and_update(%{a: 1}, :a, fn current_value ->
...>   {current_value, "new value!"}
...> end)
{1, %{a: "new value!"}}

iex> Map.get_and_update(%{a: 1}, :b, fn current_value ->
...>   {current_value, "new value!"}
...> end)
{nil, %{b: "new value!", a: 1}}

iex> Map.get_and_update(%{a: 1}, :a, fn _ -> :pop end)
{1, %{}}

iex> Map.get_and_update(%{a: 1}, :b, fn _ -> :pop end)
{nil, %{a: 1}}

get_lazy(map, key, fun)

get_lazy(map(), key(), (() -> value())) :: value()

Gets the value for a specific key in map.

If key is present in map with value value, then value is returned. Otherwise, fun is evaluated and its result is returned.

This is useful if the default value is very expensive to calculate or generally difficult to setup and teardown again.

Examples

iex> map = %{a: 1}
iex> fun = fn ->
...>   # some expensive operation here
...>   13
...> end
iex> Map.get_lazy(map, :a, fun)
1
iex> Map.get_lazy(map, :b, fun)
13

has_key?(map, key)

has_key?(map(), key()) :: boolean()

Returns whether the given key exists in the given map.

Inlined by the compiler.

Examples

iex> Map.has_key?(%{a: 1}, :a)
true
iex> Map.has_key?(%{a: 1}, :b)
false

keys(map)

keys(map()) :: [key()]

Returns all keys from map.

Inlined by the compiler.

Examples

iex> Map.keys(%{a: 1, b: 2})
[:a, :b]

merge(map1, map2)

merge(map(), map()) :: map()

Merges two maps into one.

All keys in map2 will be added to map1, overriding any existing one (i.e., the keys in map2 “have precedence” over the ones in map1).

If you have a struct and you would like to merge a set of keys into the struct, do not use this function, as it would merge all keys on the right side into the struct, even if the key is not part of the struct. Instead, use Kernel.struct/2.

Inlined by the compiler.

Examples

iex> Map.merge(%{a: 1, b: 2}, %{a: 3, d: 4})
%{a: 3, b: 2, d: 4}

merge(map1, map2, fun)

merge(map(), map(), (key(), value(), value() -> value())) :: map()

Merges two maps into one, resolving conflicts through the given fun.

All keys in map2 will be added to map1. The given function will be invoked when there are duplicate keys; its arguments are key (the duplicate key), value1 (the value of key in map1), and value2 (the value of key in map2). The value returned by fun is used as the value under key in the resulting map.

Examples

iex> Map.merge(%{a: 1, b: 2}, %{a: 3, d: 4}, fn _k, v1, v2 ->
...>   v1 + v2
...> end)
%{a: 4, b: 2, d: 4}

new()

new() :: map()

Returns a new empty map.

Examples

iex> Map.new()
%{}

new(enumerable)

new(Enumerable.t()) :: map()

Creates a map from an enumerable.

Duplicated keys are removed; the latest one prevails.

Examples

iex> Map.new([{:b, 1}, {:a, 2}])
%{a: 2, b: 1}
iex> Map.new([a: 1, a: 2, a: 3])
%{a: 3}

new(enumerable, transform)

new(Enumerable.t(), (term() -> {key(), value()})) :: map()

Creates a map from an enumerable via the given transformation function.

Duplicated keys are removed; the latest one prevails.

Examples

iex> Map.new([:a, :b], fn x -> {x, x} end)
%{a: :a, b: :b}

pop(map, key, default \\ nil)

pop(map(), key(), value()) :: {value(), map()}

Returns and removes the value associated with key in map.

If key is present in map with value value, {value, new_map} is returned where new_map is the result of removing key from map. If key is not present in map, {default, map} is returned.

Examples

iex> Map.pop(%{a: 1}, :a)
{1, %{}}
iex> Map.pop(%{a: 1}, :b)
{nil, %{a: 1}}
iex> Map.pop(%{a: 1}, :b, 3)
{3, %{a: 1}}

pop_lazy(map, key, fun)

pop_lazy(map(), key(), (() -> value())) :: {value(), map()}

Lazily returns and removes the value associated with key in map.

If key is present in map with value value, {value, new_map} is returned where new_map is the result of removing key from map. If key is not present in map, {fun_result, map} is returned, where fun_result is the result of applying fun.

This is useful if the default value is very expensive to calculate or generally difficult to setup and teardown again.

Examples

iex> map = %{a: 1}
iex> fun = fn ->
...>   # some expensive operation here
...>   13
...> end
iex> Map.pop_lazy(map, :a, fun)
{1, %{}}
iex> Map.pop_lazy(map, :b, fun)
{13, %{a: 1}}

put(map, key, value)

put(map(), key(), value()) :: map()

Puts the given value under key in map.

Inlined by the compiler.

Examples

iex> Map.put(%{a: 1}, :b, 2)
%{a: 1, b: 2}
iex> Map.put(%{a: 1, b: 2}, :a, 3)
%{a: 3, b: 2}

put_new(map, key, value)

put_new(map(), key(), value()) :: map()

Puts the given value under key unless the entry key already exists in map.

Examples

iex> Map.put_new(%{a: 1}, :b, 2)
%{a: 1, b: 2}
iex> Map.put_new(%{a: 1, b: 2}, :a, 3)
%{a: 1, b: 2}

put_new_lazy(map, key, fun)

put_new_lazy(map(), key(), (() -> value())) :: map()

Evaluates fun and puts the result under key in map unless key is already present.

This function is useful in case you want to compute the value to put under key only if key is not already present (e.g., the value is expensive to calculate or generally difficult to setup and teardown again).

Examples

iex> map = %{a: 1}
iex> fun = fn ->
...>   # some expensive operation here
...>   3
...> end
iex> Map.put_new_lazy(map, :a, fun)
%{a: 1}
iex> Map.put_new_lazy(map, :b, fun)
%{a: 1, b: 3}

replace!(map, key, value) (since 1.5.0)

replace!(map(), key(), value()) :: map()

Alters the value stored under key to value, but only if the entry key already exists in map.

If key is not present in map, a KeyError exception is raised.

Inlined by the compiler.

Examples

iex> Map.replace!(%{a: 1, b: 2}, :a, 3)
%{a: 3, b: 2}

iex> Map.replace!(%{a: 1}, :b, 2)
** (KeyError) key :b not found in: %{a: 1}

split(map, keys)

split(map(), Enumerable.t()) :: {map(), map()}

Takes all entries corresponding to the given keys in map and extracts them into a separate map.

Returns a tuple with the new map and the old map with removed keys.

Keys for which there are no entries in map are ignored.

Examples

iex> Map.split(%{a: 1, b: 2, c: 3}, [:a, :c, :e])
{%{a: 1, c: 3}, %{b: 2}}

take(map, keys)

take(map(), Enumerable.t()) :: map()

Returns a new map with all the key-value pairs in map where the key is in keys.

If keys contains keys that are not in map, they’re simply ignored.

Examples

iex> Map.take(%{a: 1, b: 2, c: 3}, [:a, :c, :e])
%{a: 1, c: 3}

to_list(map)

to_list(map()) :: [{term(), term()}]

Converts map to a list.

Each key-value pair in the map is converted to a two-element tuple {key, value} in the resulting list.

Inlined by the compiler.

Examples

iex> Map.to_list(%{a: 1})
[a: 1]
iex> Map.to_list(%{1 => 2})
[{1, 2}]

update!(map, key, fun)

update!(map(), key(), (value() -> value())) :: map()

Updates key with the given function.

If key is present in map with value value, fun is invoked with argument value and its result is used as the new value of key. If key is not present in map, a KeyError exception is raised.

Examples

iex> Map.update!(%{a: 1}, :a, &(&1 * 2))
%{a: 2}

iex> Map.update!(%{a: 1}, :b, &(&1 * 2))
** (KeyError) key :b not found in: %{a: 1}

update(map, key, initial, fun)

update(map(), key(), value(), (value() -> value())) :: map()

Updates the key in map with the given function.

If key is present in map with value value, fun is invoked with argument value and its result is used as the new value of key. If key is not present in map, initial is inserted as the value of key. The initial value will not be passed through the update function.

Examples

iex> Map.update(%{a: 1}, :a, 13, &(&1 * 2))
%{a: 2}
iex> Map.update(%{a: 1}, :b, 11, &(&1 * 2))
%{a: 1, b: 11}

values(map)

values(map()) :: [value()]

Returns all values from map.

Inlined by the compiler.

Examples

iex> Map.values(%{a: 1, b: 2})
[1, 2]

© 2012 Plataformatec
Licensed under the Apache License, Version 2.0.
https://hexdocs.pm/elixir/1.7.4/Map.html