Legacy Random Generation

The RandomState provides access to legacy generators. This generator is considered frozen and will have no further improvements. It is guaranteed to produce the same values as the final point release of NumPy v1.16. These all depend on Box-Muller normals or inverse CDF exponentials or gammas. This class should only be used if it is essential to have randoms that are identical to what would have been produced by previous versions of NumPy.

RandomState adds additional information to the state which is required when using Box-Muller normals since these are produced in pairs. It is important to use RandomState.get_state, and not the underlying bit generators state, when accessing the state so that these extra values are saved.

Although we provide the MT19937 BitGenerator for use independent of RandomState, note that its default seeding uses SeedSequence rather than the legacy seeding algorithm. RandomState will use the legacy seeding algorithm. The methods to use the legacy seeding algorithm are currently private as the main reason to use them is just to implement RandomState. However, one can reset the state of MT19937 using the state of the RandomState:

from numpy.random import MT19937
from numpy.random import RandomState

rs = RandomState(12345)
mt19937 = MT19937()
mt19937.state = rs.get_state()
rs2 = RandomState(mt19937)

# Same output
rs.standard_normal()
rs2.standard_normal()

rs.random()
rs2.random()

rs.standard_exponential()
rs2.standard_exponential()
class numpy.random.RandomState(seed=None)

Container for the slow Mersenne Twister pseudo-random number generator. Consider using a different BitGenerator with the Generator container instead.

RandomState and Generator expose a number of methods for generating random numbers drawn from a variety of probability distributions. In addition to the distribution-specific arguments, each method takes a keyword argument size that defaults to None. If size is None, then a single value is generated and returned. If size is an integer, then a 1-D array filled with generated values is returned. If size is a tuple, then an array with that shape is filled and returned.

Compatibility Guarantee

A fixed bit generator using a fixed seed and a fixed series of calls to ‘RandomState’ methods using the same parameters will always produce the same results up to roundoff error except when the values were incorrect. RandomState is effectively frozen and will only receive updates that are required by changes in the the internals of Numpy. More substantial changes, including algorithmic improvements, are reserved for Generator.

Parameters
seed{None, int, array_like, BitGenerator}, optional

Random seed used to initialize the pseudo-random number generator or an instantized BitGenerator. If an integer or array, used as a seed for the MT19937 BitGenerator. Values can be any integer between 0 and 2**32 - 1 inclusive, an array (or other sequence) of such integers, or None (the default). If seed is None, then the MT19937 BitGenerator is initialized by reading data from /dev/urandom (or the Windows analogue) if available or seed from the clock otherwise.

Notes

The Python stdlib module “random” also contains a Mersenne Twister pseudo-random number generator with a number of methods that are similar to the ones available in RandomState. RandomState, besides being NumPy-aware, has the advantage that it provides a much larger number of probability distributions to choose from.

Seeding and State

get_state()

Return a tuple representing the internal state of the generator.

set_state(state)

Set the internal state of the generator from a tuple.

seed(self[, seed])

Reseed a legacy MT19937 BitGenerator

Simple random data

rand(d0, d1, …, dn)

Random values in a given shape.

randn(d0, d1, …, dn)

Return a sample (or samples) from the “standard normal” distribution.

randint(low[, high, size, dtype])

Return random integers from low (inclusive) to high (exclusive).

random_integers(low[, high, size])

Random integers of type np.int_ between low and high, inclusive.

random_sample([size])

Return random floats in the half-open interval [0.0, 1.0).

choice(a[, size, replace, p])

Generates a random sample from a given 1-D array

bytes(length)

Return random bytes.

Permutations

shuffle(x)

Modify a sequence in-place by shuffling its contents.

permutation(x)

Randomly permute a sequence, or return a permuted range.

Distributions

beta(a, b[, size])

Draw samples from a Beta distribution.

binomial(n, p[, size])

Draw samples from a binomial distribution.

chisquare(df[, size])

Draw samples from a chi-square distribution.

dirichlet(alpha[, size])

Draw samples from the Dirichlet distribution.

exponential([scale, size])

Draw samples from an exponential distribution.

f(dfnum, dfden[, size])

Draw samples from an F distribution.

gamma(shape[, scale, size])

Draw samples from a Gamma distribution.

geometric(p[, size])

Draw samples from the geometric distribution.

gumbel([loc, scale, size])

Draw samples from a Gumbel distribution.

hypergeometric(ngood, nbad, nsample[, size])

Draw samples from a Hypergeometric distribution.

laplace([loc, scale, size])

Draw samples from the Laplace or double exponential distribution with specified location (or mean) and scale (decay).

logistic([loc, scale, size])

Draw samples from a logistic distribution.

lognormal([mean, sigma, size])

Draw samples from a log-normal distribution.

logseries(p[, size])

Draw samples from a logarithmic series distribution.

multinomial(n, pvals[, size])

Draw samples from a multinomial distribution.

multivariate_normal(mean, cov[, size, …])

Draw random samples from a multivariate normal distribution.

negative_binomial(n, p[, size])

Draw samples from a negative binomial distribution.

noncentral_chisquare(df, nonc[, size])

Draw samples from a noncentral chi-square distribution.

noncentral_f(dfnum, dfden, nonc[, size])

Draw samples from the noncentral F distribution.

normal([loc, scale, size])

Draw random samples from a normal (Gaussian) distribution.

pareto(a[, size])

Draw samples from a Pareto II or Lomax distribution with specified shape.

poisson([lam, size])

Draw samples from a Poisson distribution.

power(a[, size])

Draws samples in [0, 1] from a power distribution with positive exponent a - 1.

rayleigh([scale, size])

Draw samples from a Rayleigh distribution.

standard_cauchy([size])

Draw samples from a standard Cauchy distribution with mode = 0.

standard_exponential([size])

Draw samples from the standard exponential distribution.

standard_gamma(shape[, size])

Draw samples from a standard Gamma distribution.

standard_normal([size])

Draw samples from a standard Normal distribution (mean=0, stdev=1).

standard_t(df[, size])

Draw samples from a standard Student’s t distribution with df degrees of freedom.

triangular(left, mode, right[, size])

Draw samples from the triangular distribution over the interval [left, right].

uniform([low, high, size])

Draw samples from a uniform distribution.

vonmises(mu, kappa[, size])

Draw samples from a von Mises distribution.

wald(mean, scale[, size])

Draw samples from a Wald, or inverse Gaussian, distribution.

weibull(a[, size])

Draw samples from a Weibull distribution.

zipf(a[, size])

Draw samples from a Zipf distribution.

Functions in numpy.random

Many of the RandomState methods above are exported as functions in numpy.random This usage is discouraged, as it is implemented via a global RandomState instance which is not advised on two counts:

  • It uses global state, which means results will change as the code changes
  • It uses a RandomState rather than the more modern Generator.

For backward compatible legacy reasons, we cannot change this. See random-quick-start.

beta(a, b[, size])

Draw samples from a Beta distribution.

binomial(n, p[, size])

Draw samples from a binomial distribution.

bytes(length)

Return random bytes.

chisquare(df[, size])

Draw samples from a chi-square distribution.

choice(a[, size, replace, p])

Generates a random sample from a given 1-D array

dirichlet(alpha[, size])

Draw samples from the Dirichlet distribution.

exponential([scale, size])

Draw samples from an exponential distribution.

f(dfnum, dfden[, size])

Draw samples from an F distribution.

gamma(shape[, scale, size])

Draw samples from a Gamma distribution.

geometric(p[, size])

Draw samples from the geometric distribution.

get_state()

Return a tuple representing the internal state of the generator.

gumbel([loc, scale, size])

Draw samples from a Gumbel distribution.

hypergeometric(ngood, nbad, nsample[, size])

Draw samples from a Hypergeometric distribution.

laplace([loc, scale, size])

Draw samples from the Laplace or double exponential distribution with specified location (or mean) and scale (decay).

logistic([loc, scale, size])

Draw samples from a logistic distribution.

lognormal([mean, sigma, size])

Draw samples from a log-normal distribution.

logseries(p[, size])

Draw samples from a logarithmic series distribution.

multinomial(n, pvals[, size])

Draw samples from a multinomial distribution.

multivariate_normal(mean, cov[, size, …])

Draw random samples from a multivariate normal distribution.

negative_binomial(n, p[, size])

Draw samples from a negative binomial distribution.

noncentral_chisquare(df, nonc[, size])

Draw samples from a noncentral chi-square distribution.

noncentral_f(dfnum, dfden, nonc[, size])

Draw samples from the noncentral F distribution.

normal([loc, scale, size])

Draw random samples from a normal (Gaussian) distribution.

pareto(a[, size])

Draw samples from a Pareto II or Lomax distribution with specified shape.

permutation(x)

Randomly permute a sequence, or return a permuted range.

poisson([lam, size])

Draw samples from a Poisson distribution.

power(a[, size])

Draws samples in [0, 1] from a power distribution with positive exponent a - 1.

rand(d0, d1, …, dn)

Random values in a given shape.

randint(low[, high, size, dtype])

Return random integers from low (inclusive) to high (exclusive).

randn(d0, d1, …, dn)

Return a sample (or samples) from the “standard normal” distribution.

random([size])

Return random floats in the half-open interval [0.0, 1.0).

random_integers(low[, high, size])

Random integers of type np.int_ between low and high, inclusive.

random_sample([size])

Return random floats in the half-open interval [0.0, 1.0).

ranf()

This is an alias of random_sample.

rayleigh([scale, size])

Draw samples from a Rayleigh distribution.

sample()

This is an alias of random_sample.

seed(self[, seed])

Reseed a legacy MT19937 BitGenerator

set_state(state)

Set the internal state of the generator from a tuple.

shuffle(x)

Modify a sequence in-place by shuffling its contents.

standard_cauchy([size])

Draw samples from a standard Cauchy distribution with mode = 0.

standard_exponential([size])

Draw samples from the standard exponential distribution.

standard_gamma(shape[, size])

Draw samples from a standard Gamma distribution.

standard_normal([size])

Draw samples from a standard Normal distribution (mean=0, stdev=1).

standard_t(df[, size])

Draw samples from a standard Student’s t distribution with df degrees of freedom.

triangular(left, mode, right[, size])

Draw samples from the triangular distribution over the interval [left, right].

uniform([low, high, size])

Draw samples from a uniform distribution.

vonmises(mu, kappa[, size])

Draw samples from a von Mises distribution.

wald(mean, scale[, size])

Draw samples from a Wald, or inverse Gaussian, distribution.

weibull(a[, size])

Draw samples from a Weibull distribution.

zipf(a[, size])

Draw samples from a Zipf distribution.

© 2005–2020 NumPy Developers
Licensed under the 3-clause BSD License.
https://numpy.org/doc/1.19/reference/random/legacy.html