Class SheetCollate

All Implemented Interfaces:
Serializable, Cloneable, Attribute, DocAttribute, PrintJobAttribute, PrintRequestAttribute

public final class SheetCollate
extends EnumSyntax
implements DocAttribute, PrintRequestAttribute, PrintJobAttribute

Class SheetCollate is a printing attribute class, an enumeration, that specifies whether or not the media sheets of each copy of each printed document in a job are to be in sequence, when multiple copies of the document are specified by the Copies attribute. When SheetCollate is COLLATED, each copy of each document is printed with the print-stream sheets in sequence. When SheetCollate is UNCOLLATED, each print-stream sheet is printed a number of times equal to the value of the Copies attribute in succession. For example, suppose a document produces two media sheets as output, Copies is 6, and SheetCollate is UNCOLLATED; in this case six copies of the first media sheet are printed followed by six copies of the second media sheet.

Whether the effect of sheet collation is achieved by placing copies of a document in multiple output bins or in the same output bin with implementation defined document separation is implementation dependent. Also whether it is achieved by making multiple passes over the job or by using an output sorter is implementation dependent.

If a printer does not support the SheetCollate attribute (meaning the client cannot specify any particular sheet collation), the printer must behave as though SheetCollate were always set to COLLATED.

The SheetCollate attribute interacts with the MultipleDocumentHandling attribute. The MultipleDocumentHandling attribute describes the collation of entire documents, and the SheetCollate attribute describes the semantics of collating individual pages within a document.

The effect of a SheetCollate attribute on a multidoc print job (a job with multiple documents) depends on whether all the docs have the same sheet collation specified or whether different docs have different sheet collations specified, and on the (perhaps defaulted) value of the MultipleDocumentHandling attribute.

  • If all the docs have the same sheet collation specified, then the following combinations of SheetCollate and MultipleDocumentHandling are permitted, and the printer reports an error when the job is submitted if any other combination is specified:
    • SheetCollate = COLLATED, MultipleDocumentHandling = SINGLE_DOCUMENT -- All the input docs will be combined into one output document. Multiple copies of the output document will be produced with pages in collated order, i.e. pages 1, 2, 3, . . ., 1, 2, 3, . . .
    • SheetCollate = COLLATED, MultipleDocumentHandling = SINGLE_DOCUMENT_NEW_SHEET -- All the input docs will be combined into one output document, and the first impression of each input doc will always start on a new media sheet. Multiple copies of the output document will be produced with pages in collated order, i.e. pages 1, 2, 3, . . ., 1, 2, 3, . . .
    • SheetCollate = COLLATED, MultipleDocumentHandling = SEPARATE_DOCUMENTS_UNCOLLATED_COPIES -- Each input doc will remain a separate output document. Multiple copies of each output document (call them A, B, . . .) will be produced with each document's pages in collated order, but the documents themselves in uncollated order, i.e. pages A1, A2, A3, . . ., A1, A2, A3, . . ., B1, B2, B3, . . ., B1, B2, B3, . . .
    • SheetCollate = COLLATED, MultipleDocumentHandling = SEPARATE_DOCUMENTS_COLLATED_COPIES -- Each input doc will remain a separate output document. Multiple copies of each output document (call them A, B, . . .) will be produced with each document's pages in collated order, with the documents themselves also in collated order, i.e. pages A1, A2, A3, . . ., B1, B2, B3, . . ., A1, A2, A3, . . ., B1, B2, B3, . . .
    • SheetCollate = UNCOLLATED, MultipleDocumentHandling = SINGLE_DOCUMENT -- All the input docs will be combined into one output document. Multiple copies of the output document will be produced with pages in uncollated order, i.e. pages 1, 1, . . ., 2, 2, . . ., 3, 3, . . .
    • SheetCollate = UNCOLLATED, MultipleDocumentHandling = SINGLE_DOCUMENT_NEW_SHEET -- All the input docs will be combined into one output document, and the first impression of each input doc will always start on a new media sheet. Multiple copies of the output document will be produced with pages in uncollated order, i.e. pages 1, 1, . . ., 2, 2, . . ., 3, 3, . . .
    • SheetCollate = UNCOLLATED, MultipleDocumentHandling = SEPARATE_DOCUMENTS_UNCOLLATED_COPIES -- Each input doc will remain a separate output document. Multiple copies of each output document (call them A, B, . . .) will be produced with each document's pages in uncollated order, with the documents themselves also in uncollated order, i.e. pages A1, A1, . . ., A2, A2, . . ., A3, A3, . . ., B1, B1, . . ., B2, B2, . . ., B3, B3, . . .
  • If different docs have different sheet collations specified, then only one value of MultipleDocumentHandling is permitted, and the printer reports an error when the job is submitted if any other value is specified:
    • MultipleDocumentHandling = SEPARATE_DOCUMENTS_UNCOLLATED_COPIES -- Each input doc will remain a separate output document. Multiple copies of each output document (call them A, B, . . .) will be produced with each document's pages in collated or uncollated order as the corresponding input doc's SheetCollate attribute specifies, and with the documents themselves in uncollated order. If document A had SheetCollate = UNCOLLATED and document B had SheetCollate = COLLATED, the following pages would be produced: A1, A1, . . ., A2, A2, . . ., A3, A3, . . ., B1, B2, B3, . . ., B1, B2, B3, . . .

IPP Compatibility: SheetCollate is not an IPP attribute at present.

See Also:
MultipleDocumentHandling, Serialized Form

Fields

Modifier and Type Field and Description
static SheetCollate COLLATED

Sheets within a document appear in collated order when multiple copies are printed.

static SheetCollate UNCOLLATED

Sheets within a document appear in uncollated order when multiple copies are printed.

Constructors

Modifier Constructor and Description
protected SheetCollate(int value)

Construct a new sheet collate enumeration value with the given integer value.

Methods

Modifier and Type Method and Description
Class<? extends Attribute> getCategory()

Get the printing attribute class which is to be used as the "category" for this printing attribute value.

protected EnumSyntax[] getEnumValueTable()

Returns the enumeration value table for class SheetCollate.

String getName()

Get the name of the category of which this attribute value is an instance.

protected String[] getStringTable()

Returns the string table for class SheetCollate.

Methods inherited from class javax.print.attribute.EnumSyntax

clone, getOffset, getValue, hashCode, readResolve, toString

Methods inherited from class java.lang.Object

equals, finalize, getClass, notify, notifyAll, wait, wait, wait

Fields

UNCOLLATED

public static final SheetCollate UNCOLLATED

Sheets within a document appear in uncollated order when multiple copies are printed.

COLLATED

public static final SheetCollate COLLATED

Sheets within a document appear in collated order when multiple copies are printed.

Constructors

SheetCollate

protected SheetCollate(int value)

Construct a new sheet collate enumeration value with the given integer value.

Parameters:
value - Integer value.

Methods

getStringTable

protected String[] getStringTable()

Returns the string table for class SheetCollate.

Overrides:
getStringTable in class EnumSyntax
Returns:
the string table

getEnumValueTable

protected EnumSyntax[] getEnumValueTable()

Returns the enumeration value table for class SheetCollate.

Overrides:
getEnumValueTable in class EnumSyntax
Returns:
the value table

getCategory

public final Class<? extends Attribute> getCategory()

Get the printing attribute class which is to be used as the "category" for this printing attribute value.

For class SheetCollate, the category is class SheetCollate itself.

Specified by:
getCategory in interface Attribute
Returns:
Printing attribute class (category), an instance of class java.lang.Class.

getName

public final String getName()

Get the name of the category of which this attribute value is an instance.

For class SheetCollate, the category name is "sheet-collate".

Specified by:
getName in interface Attribute
Returns:
Attribute category name.

© 1993, 2020, Oracle and/or its affiliates. All rights reserved.
Documentation extracted from Debian's OpenJDK Development Kit package.
Licensed under the GNU General Public License, version 2, with the Classpath Exception.
Various third party code in OpenJDK is licensed under different licenses (see Debian package).
Java and OpenJDK are trademarks or registered trademarks of Oracle and/or its affiliates.
https://docs.oracle.com/javase/8/docs/api/javax/print/attribute/standard/SheetCollate.html