QQmlEngine Class

The QQmlEngine class provides an environment for instantiating QML components. More...

Header: #include <QQmlEngine>
qmake: QT += qml
Since: Qt 5.0
Inherits: QJSEngine
Inherited By:

QQmlApplicationEngine

Public Types

enum ObjectOwnership { CppOwnership, JavaScriptOwnership }

Properties

  • 1 property inherited from QObject

Public Functions

QQmlEngine(QObject *parent = nullptr)
virtual ~QQmlEngine() override
void addImageProvider(const QString &providerId, QQmlImageProviderBase *provider)
void addImportPath(const QString &path)
void addPluginPath(const QString &path)
QUrl baseUrl() const
void clearComponentCache()
QQmlImageProviderBase * imageProvider(const QString &providerId) const
QStringList importPathList() const
bool importPlugin(const QString &filePath, const QString &uri, QList<QQmlError> *errors)
QQmlIncubationController * incubationController() const
QNetworkAccessManager * networkAccessManager() const
QQmlNetworkAccessManagerFactory * networkAccessManagerFactory() const
QString offlineStorageDatabaseFilePath(const QString &databaseName) const
QString offlineStoragePath() const
bool outputWarningsToStandardError() const
QStringList pluginPathList() const
void removeImageProvider(const QString &providerId)
QQmlContext * rootContext() const
void setBaseUrl(const QUrl &url)
void setImportPathList(const QStringList &paths)
void setIncubationController(QQmlIncubationController *controller)
void setNetworkAccessManagerFactory(QQmlNetworkAccessManagerFactory *factory)
void setOfflineStoragePath(const QString &dir)
void setOutputWarningsToStandardError(bool enabled)
void setPluginPathList(const QStringList &paths)
T singletonInstance(int qmlTypeId)
void trimComponentCache()
  • 15 public functions inherited from QJSEngine
  • 31 public functions inherited from QObject

Public Slots

void retranslate()
  • 1 public slot inherited from QObject

Signals

void exit(int retCode)
void quit()
void warnings(const QList<QQmlError> &warnings)

Static Public Members

QQmlContext * contextForObject(const QObject *object)
QQmlEngine::ObjectOwnership objectOwnership(QObject *object)
void setContextForObject(QObject *object, QQmlContext *context)
void setObjectOwnership(QObject *object, QQmlEngine::ObjectOwnership ownership)
const QMetaObject staticMetaObject
  • 9 static public members inherited from QObject

Reimplemented Protected Functions

virtual bool event(QEvent *e) override
  • 9 protected functions inherited from QObject
QObject * qmlAttachedPropertiesObject(const QObject *attachee, bool create = ...)
void qmlClearTypeRegistrations()
QQmlContext * qmlContext(const QObject *object)
QQmlInfo qmlDebug(const QObject *object)
QQmlEngine * qmlEngine(const QObject *object)
QQmlInfo qmlInfo(const QObject *object)
bool qmlProtectModule(const char *uri, int majVersion)
int qmlRegisterExtendedType(const char *uri, int versionMajor, int versionMinor, const char *qmlName)
int qmlRegisterExtendedUncreatableType(const char *uri, int versionMajor, int versionMinor, const char *qmlName, const QString &reason)
int qmlRegisterInterface(const char *typeName)
void qmlRegisterModule(const char *uri, int versionMajor, int versionMinor)
int qmlRegisterRevision(const char *uri, int versionMajor, int versionMinor)
int qmlRegisterSingletonType(const char *uri, int versionMajor, int versionMinor, const char *typeName, QJSValue (*)(QQmlEngine *, QJSEngine *) callback)
int qmlRegisterSingletonType(const char *uri, int versionMajor, int versionMinor, const char *typeName, QObject *(*)(QQmlEngine *, QJSEngine *) callback)
int qmlRegisterSingletonType(const QUrl &url, const char *uri, int versionMajor, int versionMinor, const char *qmlName)
int qmlRegisterType()
int qmlRegisterType(const char *uri, int versionMajor, int versionMinor, const char *qmlName)
int qmlRegisterType(const QUrl &url, const char *uri, int versionMajor, int versionMinor, const char *qmlName)
int qmlRegisterTypeNotAvailable(const char *uri, int versionMajor, int versionMinor, const char *qmlName, const QString &message)
int qmlRegisterUncreatableMetaObject(const QMetaObject &staticMetaObject, const char *uri, int versionMajor, int versionMinor, const char *qmlName, const QString &reason)
int qmlRegisterUncreatableType(const char *uri, int versionMajor, int versionMinor, const char *qmlName, const QString &message)
int qmlTypeId(const char *uri, int versionMajor, int versionMinor, const char *qmlName)
QQmlInfo qmlWarning(const QObject *object)

Macros

QML_DECLARE_TYPE
QML_DECLARE_TYPEINFO(Type, Flags)

Detailed Description

The QQmlEngine class provides an environment for instantiating QML components.

Each QML component is instantiated in a QQmlContext. QQmlContext's are essential for passing data to QML components. In QML, contexts are arranged hierarchically and this hierarchy is managed by the QQmlEngine.

Prior to creating any QML components, an application must have created a QQmlEngine to gain access to a QML context. The following example shows how to create a simple Text item.

QQmlEngine engine;
QQmlComponent component(&engine);
component.setData("import QtQuick 2.0\nText { text: \"Hello world!\" }", QUrl());
QQuickItem *item = qobject_cast<QQuickItem *>(component.create());

//add item to view, etc
...

In this case, the Text item will be created in the engine's root context.

See also QQmlComponent, QQmlContext, and QML Global Object.

Member Type Documentation

enum QQmlEngine::ObjectOwnership

ObjectOwnership controls whether or not QML automatically destroys the QObject when the corresponding JavaScript object is garbage collected by the engine. The two ownership options are:

Constant Value Description
QQmlEngine::CppOwnership 0 The object is owned by C++ code and QML will never delete it. The JavaScript destroy() method cannot be used on these objects. This option is similar to QScriptEngine::QtOwnership.
QQmlEngine::JavaScriptOwnership 1 The object is owned by JavaScript. When the object is returned to QML as the return value of a method call, QML will track it and delete it if there are no remaining JavaScript references to it and it has no QObject::parent(). An object tracked by one QQmlEngine will be deleted during that QQmlEngine's destructor. Thus, JavaScript references between objects with JavaScriptOwnership from two different engines will not be valid if one of these engines is deleted. This option is similar to QScriptEngine::ScriptOwnership.

Generally an application doesn't need to set an object's ownership explicitly. QML uses a heuristic to set the default ownership. By default, an object that is created by QML has JavaScriptOwnership. The exception to this are the root objects created by calling QQmlComponent::create() or QQmlComponent::beginCreate(), which have CppOwnership by default. The ownership of these root-level objects is considered to have been transferred to the C++ caller.

Objects not-created by QML have CppOwnership by default. The exception to this are objects returned from C++ method calls; their ownership will be set to JavaScriptOwnership. This applies only to explicit invocations of Q_INVOKABLE methods or slots, but not to property getter invocations.

Calling setObjectOwnership() overrides the default ownership heuristic used by QML.

Property Documentation

offlineStoragePath : QString

This property holds the directory for storing offline user data

Returns the directory where SQL and other offline storage is placed.

The SQL databases created with openDatabase() are stored here.

The default is QML/OfflineStorage in the platform-standard user application data directory.

Note that the path may not currently exist on the filesystem, so callers wanting to create new files at this location should create it first - see QDir::mkpath().

Access functions:

QString offlineStoragePath() const
void setOfflineStoragePath(const QString &dir)

Member Function Documentation

QQmlEngine::QQmlEngine(QObject *parent = nullptr)

Create a new QQmlEngine with the given parent.

[override virtual] QQmlEngine::~QQmlEngine()

Destroys the QQmlEngine.

Any QQmlContext's created on this engine will be invalidated, but not destroyed (unless they are parented to the QQmlEngine object).

See QJSEngine docs for details on cleaning up the JS engine.

void QQmlEngine::addImageProvider(const QString &providerId, QQmlImageProviderBase *provider)

Sets the provider to use for images requested via the image: url scheme, with host providerId. The QQmlEngine takes ownership of provider.

Image providers enable support for pixmap and threaded image requests. See the QQuickImageProvider documentation for details on implementing and using image providers.

All required image providers should be added to the engine before any QML sources files are loaded.

See also removeImageProvider(), QQuickImageProvider, and QQmlImageProviderBase.

void QQmlEngine::addImportPath(const QString &path)

Adds path as a directory where the engine searches for installed modules in a URL-based directory structure.

The path may be a local filesystem directory, a Qt Resource path (:/imports), a Qt Resource url (qrc:/imports) or a URL.

The path will be converted into canonical form before it is added to the import path list.

The newly added path will be first in the importPathList().

See also setImportPathList() and QML Modules.

void QQmlEngine::addPluginPath(const QString &path)

Adds path as a directory where the engine searches for native plugins for imported modules (referenced in the qmldir file).

By default, the list contains only ., i.e. the engine searches in the directory of the qmldir file itself.

The newly added path will be first in the pluginPathList().

See also setPluginPathList().

QUrl QQmlEngine::baseUrl() const

Return the base URL for this engine. The base URL is only used to resolve components when a relative URL is passed to the QQmlComponent constructor.

If a base URL has not been explicitly set, this method returns the application's current working directory.

See also setBaseUrl().

void QQmlEngine::clearComponentCache()

Clears the engine's internal component cache.

This function causes the property metadata of all components previously loaded by the engine to be destroyed. All previously loaded components and the property bindings for all extant objects created from those components will cease to function.

This function returns the engine to a state where it does not contain any loaded component data. This may be useful in order to reload a smaller subset of the previous component set, or to load a new version of a previously loaded component.

Once the component cache has been cleared, components must be loaded before any new objects can be created.

See also trimComponentCache().

[static] QQmlContext *QQmlEngine::contextForObject(const QObject *object)

Returns the QQmlContext for the object, or 0 if no context has been set.

When the QQmlEngine instantiates a QObject, the context is set automatically.

See also setContextForObject(), qmlContext(), and qmlEngine().

[override virtual protected] bool QQmlEngine::event(QEvent *e)

Reimplemented from QObject::event().

[signal] void QQmlEngine::exit(int retCode)

This signal is emitted when the QML loaded by the engine would like to exit from the event loop with the specified return code retCode.

This function was introduced in Qt 5.8.

See also quit().

QQmlImageProviderBase *QQmlEngine::imageProvider(const QString &providerId) const

Returns the image provider set for providerId if found; otherwise returns nullptr.

See also QQuickImageProvider.

QStringList QQmlEngine::importPathList() const

Returns the list of directories where the engine searches for installed modules in a URL-based directory structure.

For example, if /opt/MyApp/lib/imports is in the path, then QML that imports com.mycompany.Feature will cause the QQmlEngine to look in /opt/MyApp/lib/imports/com/mycompany/Feature/ for the components provided by that module. A qmldir file is required for defining the type version mapping and possibly QML extensions plugins.

By default, the list contains the directory of the application executable, paths specified in the QML2_IMPORT_PATH environment variable, and the builtin Qml2ImportsPath from QLibraryInfo.

See also addImportPath() and setImportPathList().

bool QQmlEngine::importPlugin(const QString &filePath, const QString &uri, QList<QQmlError> *errors)

Imports the plugin named filePath with the uri provided. Returns true if the plugin was successfully imported; otherwise returns false.

On failure and if non-null, the errors list will have any errors which occurred prepended to it.

The plugin has to be a Qt plugin which implements the QQmlExtensionPlugin interface.

QQmlIncubationController *QQmlEngine::incubationController() const

Returns the currently set incubation controller, or 0 if no controller has been set.

See also setIncubationController().

QNetworkAccessManager *QQmlEngine::networkAccessManager() const

Returns a common QNetworkAccessManager which can be used by any QML type instantiated by this engine.

If a QQmlNetworkAccessManagerFactory has been set and a QNetworkAccessManager has not yet been created, the QQmlNetworkAccessManagerFactory will be used to create the QNetworkAccessManager; otherwise the returned QNetworkAccessManager will have no proxy or cache set.

See also setNetworkAccessManagerFactory().

QQmlNetworkAccessManagerFactory *QQmlEngine::networkAccessManagerFactory() const

Returns the current QQmlNetworkAccessManagerFactory.

See also setNetworkAccessManagerFactory().

[static] QQmlEngine::ObjectOwnership QQmlEngine::objectOwnership(QObject *object)

Returns the ownership of object.

See also setObjectOwnership().

QString QQmlEngine::offlineStorageDatabaseFilePath(const QString &databaseName) const

Returns the file path where a Local Storage database with the identifier databaseName is (or would be) located.

This function was introduced in Qt 5.9.

See also LocalStorage.openDatabaseSync().

bool QQmlEngine::outputWarningsToStandardError() const

Returns true if warning messages will be output to stderr in addition to being emitted by the warnings() signal, otherwise false.

The default value is true.

See also setOutputWarningsToStandardError().

QStringList QQmlEngine::pluginPathList() const

Returns the list of directories where the engine searches for native plugins for imported modules (referenced in the qmldir file).

By default, the list contains only ., i.e. the engine searches in the directory of the qmldir file itself.

See also addPluginPath() and setPluginPathList().

[signal] void QQmlEngine::quit()

This signal is emitted when the QML loaded by the engine would like to quit.

See also exit().

void QQmlEngine::removeImageProvider(const QString &providerId)

Removes the image provider for providerId.

See also addImageProvider() and QQuickImageProvider.

[slot] void QQmlEngine::retranslate()

Refreshes all binding expressions that use strings marked for translation.

Call this function after you have installed a new translator with QCoreApplication::installTranslator, to ensure that your user-interface shows up-to-date translations.

Note: Due to a limitation in the implementation, this function refreshes all the engine's bindings, not only those that use strings marked for translation. This may be optimized in a future release.

This function was introduced in Qt 5.10.

QQmlContext *QQmlEngine::rootContext() const

Returns the engine's root context.

The root context is automatically created by the QQmlEngine. Data that should be available to all QML component instances instantiated by the engine should be put in the root context.

Additional data that should only be available to a subset of component instances should be added to sub-contexts parented to the root context.

void QQmlEngine::setBaseUrl(const QUrl &url)

Set the base URL for this engine to url.

See also baseUrl().

[static] void QQmlEngine::setContextForObject(QObject *object, QQmlContext *context)

Sets the QQmlContext for the object to context. If the object already has a context, a warning is output, but the context is not changed.

When the QQmlEngine instantiates a QObject, the context is set automatically.

See also contextForObject().

void QQmlEngine::setImportPathList(const QStringList &paths)

Sets paths as the list of directories where the engine searches for installed modules in a URL-based directory structure.

By default, the list contains the directory of the application executable, paths specified in the QML2_IMPORT_PATH environment variable, and the builtin Qml2ImportsPath from QLibraryInfo.

See also importPathList() and addImportPath().

void QQmlEngine::setIncubationController(QQmlIncubationController *controller)

Sets the engine's incubation controller. The engine can only have one active controller and it does not take ownership of it.

See also incubationController().

void QQmlEngine::setNetworkAccessManagerFactory(QQmlNetworkAccessManagerFactory *factory)

Sets the factory to use for creating QNetworkAccessManager(s).

QNetworkAccessManager is used for all network access by QML. By implementing a factory it is possible to create custom QNetworkAccessManager with specialized caching, proxy and cookie support.

The factory must be set before executing the engine.

Note: QQmlEngine does not take ownership of the factory.

See also networkAccessManagerFactory().

[static] void QQmlEngine::setObjectOwnership(QObject *object, QQmlEngine::ObjectOwnership ownership)

Sets the ownership of object.

See also objectOwnership().

void QQmlEngine::setOutputWarningsToStandardError(bool enabled)

Set whether warning messages will be output to stderr to enabled.

If enabled is true, any warning messages generated by QML will be output to stderr and emitted by the warnings() signal. If enabled is false, only the warnings() signal will be emitted. This allows applications to handle warning output themselves.

The default value is true.

See also outputWarningsToStandardError().

void QQmlEngine::setPluginPathList(const QStringList &paths)

Sets the list of directories where the engine searches for native plugins for imported modules (referenced in the qmldir file) to paths.

By default, the list contains only ., i.e. the engine searches in the directory of the qmldir file itself.

See also pluginPathList() and addPluginPath().

T QQmlEngine::singletonInstance(int qmlTypeId)

Returns the instance of a singleton type that was registered under qmlTypeId.

The template argument T may be either QJSValue or a pointer to a QObject-derived type and depends on how the singleton was registered. If no instance of T has been created yet, it is created now. If qmlTypeId does not represent a valid singleton type, either a default constructed QJSValue or a nullptr is returned.

QObject* example:

class MySingleton : public QObject {
  Q_OBJECT
  static int typeId;
  // ...
};

// Register with QObject* callback
MySingleton::typeId = qmlRegisterSingletonType<MySingleton>(...);

// Retrieve as QObject*
QQmlEngine engine;
MySingleton* instance = engine.singletonInstance<MySingleton*>(MySingleton::typeId);

QJSValue example:

// Register with QJSValue callback
int typeId = qmlRegisterSingletonType(...);

// Retrieve as QJSValue
QQmlEngine engine;
QJSValue instance = engine.singletonInstance<QJSValue>(typeId);

It is recommended to store the QML type id during registration, e.g. as a static member in the singleton class. Otherwise, a costly lookup via qmlTypeId() has to be performed at run-time.

This function was introduced in Qt 5.12.

See also qmlRegisterSingletonType() and qmlTypeId().

void QQmlEngine::trimComponentCache()

Trims the engine's internal component cache.

This function causes the property metadata of any loaded components which are not currently in use to be destroyed.

A component is considered to be in use if there are any extant instances of the component itself, any instances of other components that use the component, or any objects instantiated by any of those components.

See also clearComponentCache().

[signal] void QQmlEngine::warnings(const QList<QQmlError> &warnings)

This signal is emitted when warnings messages are generated by QML.

Related Non-Members

QObject *qmlAttachedPropertiesObject(const QObject *attachee, bool create = ...)

The form of this template function is:

template<typename T> QObject *qmlAttachedPropertiesObject(const QObject *attachee, bool create = true)

This returns the attached object instance that has been attached to the specified attachee by the attaching type T.

If create is true and type T is a valid attaching type, this creates and returns a new attached object instance.

Returns 0 if type T is not a valid attaching type, or if create is false and no attachment object instance has previously been created for attachee.

See also Providing Attached Properties.

void qmlClearTypeRegistrations()

Clears all stored type registrations, such as those produced with qmlRegisterType().

Do not call this function while a QQmlEngine exists or behavior will be undefined. Any existing QQmlEngines must be deleted before calling this function. This function only affects the application global cache. Delete the QQmlEngine to clear all cached data relating to that engine.

QQmlContext *qmlContext(const QObject *object)

Returns the QQmlContext associated with object, if any. This is equivalent to QQmlEngine::contextForObject(object).

Note: Add #include <QtQml> to use this function.

See also contextForObject() and qmlEngine().

QQmlInfo QtQml::qmlDebug(const QObject *object)

Prints debug messages that include the file and line number for the specified QML object.

When QML types produce logging messages, it improves traceability if they include the QML file and line number on which the particular instance was instantiated.

To include the file and line number, an object must be passed. If the file and line number is not available for that instance (either it was not instantiated by the QML engine or location information is disabled), "unknown location" will be used instead. For example,

qmlDebug(object) << "Internal state: 42";

prints

QML MyCustomType (unknown location): Internal state: 42

This function was introduced in Qt 5.9.

See also QtQml::qmlInfo and QtQml::qmlWarning.

QQmlEngine *qmlEngine(const QObject *object)

Returns the QQmlEngine associated with object, if any. This is equivalent to QQmlEngine::contextForObject(object)->engine(), but more efficient.

Note: Add #include <QtQml> to use this function.

See also contextForObject() and qmlContext().

QQmlInfo QtQml::qmlInfo(const QObject *object)

Prints informational messages that include the file and line number for the specified QML object.

When QML types produce logging messages, it improves traceability if they include the QML file and line number on which the particular instance was instantiated.

To include the file and line number, an object must be passed. If the file and line number is not available for that instance (either it was not instantiated by the QML engine or location information is disabled), "unknown location" will be used instead.

For example,

qmlInfo(object) << tr("component property is a write-once property");

prints

QML MyCustomType (unknown location): component property is a write-once property

Note: In versions prior to Qt 5.9, qmlInfo reported messages using a warning QtMsgType. For Qt 5.9 and above, qmlInfo uses an info QtMsgType. To send warnings, use qmlWarning.

See also QtQml::qmlDebug and QtQml::qmlWarning.

bool qmlProtectModule(const char *uri, int majVersion)

This function protects a module from having types registered into it. This can be used to prevent other plugins from injecting types into your module. It can also be a performance improvement, as it allows the engine to skip checking for the possibility of new types or plugins when this import is reached.

The performance benefit is primarily seen when registering application specific types from within the application instead of through a plugin. Using qmlProtectModule allows the engine to skip checking for a plugin when that uri is imported, which can be noticeable with slow file systems.

After this function is called, any attempt to register C++ types into this uri, major version combination will lead to a runtime error. Call this after you have registered all of your types with the engine.

Returns true if the module with uri as a module identifier and majVersion as a major version number was found and locked, otherwise returns false. The module must contain exported types in order to be found.

int qmlRegisterExtendedType(const char *uri, int versionMajor, int versionMinor, const char *qmlName)

This template function registers the C++ type and its extension object in the QML system with the name qmlName in the library imported from uri having version number composed from versionMajor and versionMinor. Properties not available in the main type will be searched for in the extension object.

Returns the QML type id.

See also qmlRegisterType() and Registering Extension Objects.

int qmlRegisterExtendedUncreatableType(const char *uri, int versionMajor, int versionMinor, const char *qmlName, const QString &reason)

This template function registers the C++ type and its extension in the QML system with the name qmlName in the library imported from uri having version number composed from versionMajor and versionMinor.

While the type has a name and a type, it cannot be created. An error message with the given reason is printed if the user attempts to create an instance of this type.

This is useful where the type is only intended for providing attached properties, enum values or an abstract base class with its extension.

Returns the QML type id.

See also qmlRegisterUncreatableType().

int qmlRegisterInterface(const char *typeName)

This template function registers the C++ type in the QML system under the name typeName.

Types registered as an interface with the engine should also declare themselves as an interface with the meta object system. For example:

struct FooInterface
{
public:
    virtual ~FooInterface();
    virtual void doSomething() = 0;
};

Q_DECLARE_INTERFACE(FooInterface, "org.foo.FooInterface")

When registered with the QML engine in this way, they can be used as property types:

Q_PROPERTY(FooInterface *foo READ foo WRITE setFoo)

When you assign a QObject sub-class to this property, the QML engine does the interface cast to FooInterface* automatically.

Returns the QML type id.

void qmlRegisterModule(const char *uri, int versionMajor, int versionMinor)

This function registers a module in a particular uri with a version specified in versionMajor and versionMinor.

This can be used to make a certain module version available, even if no types are registered for that version. This is particularly useful for keeping the versions of related modules in sync.

This function was introduced in Qt 5.9.

int qmlRegisterRevision(const char *uri, int versionMajor, int versionMinor)

This template function registers the specified revision of a C++ type in the QML system with the library imported from uri having the version number composed from versionMajor and versionMinor.

Returns the QML type id.

template<typename T, int metaObjectRevision>
int qmlRegisterRevision(const char *uri, int versionMajor, int versionMinor);

This function is typically used to register the revision of a base class to use for the specified version of the type (see Type Revisions and Versions).

int qmlRegisterSingletonType(const char *uri, int versionMajor, int versionMinor, const char *typeName, QJSValue (*)(QQmlEngine *, QJSEngine *) callback)

This function may be used to register a singleton type provider callback in a particular uri and typeName with a version specified in versionMajor and versionMinor.

Installing a singleton type allows developers to provide arbitrary functionality (methods and properties) to a client without requiring individual instances of the type to be instantiated by the client.

A singleton type may be either a QObject or a QJSValue. This function should be used to register a singleton type provider function which returns a QJSValue as a singleton type.

NOTE: QJSValue singleton type properties will not trigger binding re-evaluation if changed.

Usage:

// First, define the singleton type provider function (callback).
static QJSValue example_qjsvalue_singletontype_provider(QQmlEngine *engine, QJSEngine *scriptEngine)
{
    Q_UNUSED(engine)

    static int seedValue = 5;
    QJSValue example = scriptEngine->newObject();
    example.setProperty("someProperty", seedValue++);
    return example;
}

// Second, register the singleton type provider with QML by calling this function in an initialization function.
qmlRegisterSingletonType("Qt.example.qjsvalueApi", 1, 0, "MyApi", example_qjsvalue_singletontype_provider);

Alternatively, you can use a C++11 lambda:

qmlRegisterSingletonType("Qt.example.qjsvalueApi", 1, 0, "MyApi", [](QQmlEngine *engine, QJSEngine *scriptEngine) -> QJSValue {
    Q_UNUSED(engine)

    static int seedValue = 5;
    QJSValue example = scriptEngine->newObject();
    example.setProperty("someProperty", seedValue++);
    return example;
});

In order to use the registered singleton type in QML, you must import the singleton type.

import QtQuick 2.0
import Qt.example.qjsvalueApi 1.0 as ExampleApi
Item {
    id: root
    property int someValue: ExampleApi.MyApi.someProperty
}

See also Choosing the Correct Integration Method Between C++ and QML.

int qmlRegisterSingletonType(const char *uri, int versionMajor, int versionMinor, const char *typeName, QObject *(*)(QQmlEngine *, QJSEngine *) callback)

This function may be used to register a singleton type provider callback in a particular uri and typeName with a version specified in versionMajor and versionMinor.

Installing a singleton type into a uri allows developers to provide arbitrary functionality (methods and properties) to clients without requiring individual instances ot the type to be instantiated by the client.

A singleton type may be either a QObject or a QJSValue. This function should be used to register a singleton type provider function which returns a QObject of the given type T as a singleton type.

A QObject singleton type may be referenced via the type name with which it was registered, and this typename may be used as the target in a Connections type or otherwise used as any other type id would. One exception to this is that a QObject singleton type property may not be aliased (because the singleton type name does not identify an object within the same component as any other item).

NOTE: A QObject singleton type instance returned from a singleton type provider is owned by the QML engine unless the object has explicit QQmlEngine::CppOwnership flag set.

Usage:

// First, define your QObject which provides the functionality.
class SingletonTypeExample : public QObject
{
    Q_OBJECT
    Q_PROPERTY (int someProperty READ someProperty WRITE setSomeProperty NOTIFY somePropertyChanged)

public:
    SingletonTypeExample(QObject* parent = 0)
        : QObject(parent), m_someProperty(0)
    {
    }

    ~SingletonTypeExample() {}

    Q_INVOKABLE int doSomething() { setSomeProperty(5); return m_someProperty; }

    int someProperty() const { return m_someProperty; }
    void setSomeProperty(int val) { m_someProperty = val; emit somePropertyChanged(val); }

signals:
    void somePropertyChanged(int newValue);

private:
    int m_someProperty;
};

// Second, define the singleton type provider function (callback).
static QObject *example_qobject_singletontype_provider(QQmlEngine *engine, QJSEngine *scriptEngine)
{
    Q_UNUSED(engine)
    Q_UNUSED(scriptEngine)

    SingletonTypeExample *example = new SingletonTypeExample();
    return example;
}

// Third, register the singleton type provider with QML by calling this function in an initialization function.
qmlRegisterSingletonType<SingletonTypeExample>("Qt.example.qobjectSingleton", 1, 0, "MyApi", example_qobject_singletontype_provider);

Alternatively, you can use a C++11 lambda:

qmlRegisterSingletonType<SingletonTypeExample>("Qt.example.qjsvalueApi", 1, 0, "MyApi", [](QQmlEngine *engine, QJSEngine *scriptEngine) -> QObject * {
    Q_UNUSED(engine)
    Q_UNUSED(scriptEngine)

    SingletonTypeExample *example = new SingletonTypeExample();
    return example;
});

In order to use the registered singleton type in QML, you must import the singleton type.

import QtQuick 2.0
import Qt.example.qobjectSingleton 1.0
Item {
    id: root
    property int someValue: MyApi.someProperty

    Component.onCompleted: {
        someValue = MyApi.doSomething()
    }
}

See also Choosing the Correct Integration Method Between C++ and QML.

int qmlRegisterSingletonType(const QUrl &url, const char *uri, int versionMajor, int versionMinor, const char *qmlName)

This function may be used to register a singleton type with the name qmlName, in the library imported from uri having the version number composed from versionMajor and versionMinor. The type is defined by the QML file located at url. The url must be an absolute URL, i.e. url.isRelative() == false.

In addition the type's QML file must have pragma Singleton statement among its import statements.

A singleton type may be referenced via the type name with which it was registered, and this typename may be used as the target in a Connections type or otherwise used as any other type id would. One exception to this is that a singleton type property may not be aliased (because the singleton type name does not identify an object within the same component as any other item).

Usage:

// First, define your QML singleton type which provides the functionality.
pragma Singleton
import QtQuick 2.0
Item {
    property int testProp1: 125
}
// Second, register the QML singleton type by calling this function in an initialization function.
qmlRegisterSingletonType(QUrl("file:///absolute/path/SingletonType.qml"), "Qt.example.qobjectSingleton", 1, 0, "RegisteredSingleton");

In order to use the registered singleton type in QML, you must import the singleton type.

import QtQuick 2.0
import Qt.example.qobjectSingleton 1.0
Item {
    id: root
    property int someValue: RegisteredSingleton.testProp1
}

It is also possible to have QML singleton types registered without using the qmlRegisterSingletonType function. That can be done by adding a pragma Singleton statement among the imports of the type's QML file. In addition the type must be defined in a qmldir file with a singleton keyword and the qmldir must be imported by the QML files using the singleton.

int qmlRegisterType()

This is an overloaded function.

This template function registers the C++ type in the QML system. Instances of this type cannot be created from the QML system.

This function should be used when the type will not be referenced by name. Specifically, it has to be used for C++ types that are used as the left-hand side of a property binding.

For example, consider the following two classes:

class Bar : public QObject
{
    Q_OBJECT
    Q_PROPERTY(QString baz READ baz WRITE setBaz NOTIFY bazChanged)

public:
    Bar() {}

    QString baz() const { return mBaz; }

    void setBaz(const QString &baz)
    {
        if (baz == mBaz)
            return;

        mBaz = baz;
        emit bazChanged();
    }

signals:
    void bazChanged();

private:
    QString mBaz;
};

class Foo : public QObject
{
    Q_OBJECT
    Q_PROPERTY(Bar *bar READ bar CONSTANT FINAL)

public:
    Foo() {}

    Bar *bar() { return &mBar; }

private:
    Bar mBar;
};

In QML, we assign a string to the baz property of bar:

Foo {
    bar.baz: "abc"
    Component.onCompleted: print(bar.baz)
}

For the QML engine to know that the Bar type has a baz property, we have to make Bar known:

qmlRegisterType<Foo>("App", 1, 0, "Foo");
qmlRegisterType<Bar>();

As the Foo type is instantiated in QML, it must be registered with the version of qmlRegisterType() that takes an import URI.

Returns the QML type id.

See also Choosing the Correct Integration Method Between C++ and QML.

int qmlRegisterType(const char *uri, int versionMajor, int versionMinor, const char *qmlName)

This template function registers the C++ type in the QML system with the name qmlName, in the library imported from uri having the version number composed from versionMajor and versionMinor.

Returns the QML type id.

There are two forms of this template function:

template<typename T>
int qmlRegisterType(const char *uri, int versionMajor, int versionMinor, const char *qmlName);

template<typename T, int metaObjectRevision>
int qmlRegisterType(const char *uri, int versionMajor, int versionMinor, const char *qmlName);

The former is the standard form which registers the type T as a new type. The latter allows a particular revision of a class to be registered in a specified version (see Type Revisions and Versions).

For example, this registers a C++ class MySliderItem as a QML type named Slider for version 1.0 of a type namespace called "com.mycompany.qmlcomponents":

qmlRegisterType<MySliderItem>("com.mycompany.qmlcomponents", 1, 0, "Slider");

Once this is registered, the type can be used in QML by importing the specified type namespace and version number:

import com.mycompany.qmlcomponents 1.0

Slider {
    // ...
}

Note that it's perfectly reasonable for a library to register types to older versions than the actual version of the library. Indeed, it is normal for the new library to allow QML written to previous versions to continue to work, even if more advanced versions of some of its types are available.

See also Choosing the Correct Integration Method Between C++ and QML.

int qmlRegisterType(const QUrl &url, const char *uri, int versionMajor, int versionMinor, const char *qmlName)

This function registers a type in the QML system with the name qmlName, in the library imported from uri having the version number composed from versionMajor and versionMinor. The type is defined by the QML file located at url. The url must be an absolute URL, i.e. url.isRelative() == false.

Normally QML files can be loaded as types directly from other QML files, or using a qmldir file. This function allows registration of files to types from C++ code, such as when the type mapping needs to be procedurally determined at startup.

Returns -1 if the registration was not successful.

int qmlRegisterTypeNotAvailable(const char *uri, int versionMajor, int versionMinor, const char *qmlName, const QString &message)

This function registers a type in the QML system with the name qmlName, in the type namespace imported from uri having the version number composed from versionMajor and versionMinor, but any attempt to instantiate the type will produce the given error message.

Normally, the types exported by a plugin should be fixed. However, if a C++ type is not available, you should at least "reserve" the QML type name, and give the user of the unavailable type a meaningful error message.

Returns the QML type id.

Example:

#ifdef NO_GAMES_ALLOWED
qmlRegisterTypeNotAvailable("MinehuntCore", 0, 1, "Game", "Get back to work, slacker!");
#else
qmlRegisterType<MinehuntGame>("MinehuntCore", 0, 1, "Game");
#endif

This will cause any QML which imports the "MinehuntCore" type namespace and attempts to use the type to produce an error message:

fun.qml: Get back to work, slacker!
   Game {
   ^

Without this, a generic "Game is not a type" message would be given.

See also qmlRegisterUncreatableType() and Choosing the Correct Integration Method Between C++ and QML.

int qmlRegisterUncreatableMetaObject(const QMetaObject &staticMetaObject, const char *uri, int versionMajor, int versionMinor, const char *qmlName, const QString &reason)

This function registers the staticMetaObject and its extension in the QML system with the name qmlName in the library imported from uri having version number composed from versionMajor and versionMinor.

An instance of the meta object cannot be created. An error message with the given reason is printed if the user attempts to create it.

This function is useful for registering Q_NAMESPACE namespaces.

Returns the QML type id.

For example:

namespace MyNamespace {
  Q_NAMESPACE
  enum MyEnum {
      Key1,
      Key2,
  };
  Q_ENUMS(MyEnum)
}

//...
qmlRegisterUncreatableMetaObject(MyNamespace::staticMetaObject, "io.qt", 1, 0, "MyNamespace", "Access to enums & flags only");

On the QML side, you can now use the registered enums:

Component.onCompleted: console.log(MyNamespace.Key2)

This function was introduced in Qt 5.8.

int qmlRegisterUncreatableType(const char *uri, int versionMajor, int versionMinor, const char *qmlName, const QString &message)

This template function registers the C++ type in the QML system with the name qmlName, in the library imported from uri having the version number composed from versionMajor and versionMinor.

While the type has a name and a type, it cannot be created, and the given error message will result if creation is attempted.

This is useful where the type is only intended for providing attached properties or enum values.

Returns the QML type id.

See also qmlRegisterTypeNotAvailable() and Choosing the Correct Integration Method Between C++ and QML.

int qmlTypeId(const char *uri, int versionMajor, int versionMinor, const char *qmlName)

Returns the QML type id of a type that was registered with the name qmlName in a particular uri and a version specified in versionMajor and versionMinor.

This function returns the same value as the QML type registration functions such as qmlRegisterType() and qmlRegisterSingletonType().

If qmlName, uri and versionMajor match a registered type, but the specified minor version in versionMinor is higher, then the id of the type with the closest minor version is returned.

Returns -1 if no matching type was found or one of the given parameters was invalid.

This function was introduced in Qt 5.12.

See also qmlRegisterType() and qmlRegisterSingletonType().

QQmlInfo QtQml::qmlWarning(const QObject *object)

Prints warning messages that include the file and line number for the specified QML object.

When QML types produce logging messages, it improves traceability if they include the QML file and line number on which the particular instance was instantiated.

To include the file and line number, an object must be passed. If the file and line number is not available for that instance (either it was not instantiated by the QML engine or location information is disabled), "unknown location" will be used instead.

For example,

qmlInfo(object) << tr("property cannot be set to 0");

prints

QML MyCustomType (unknown location): property cannot be set to 0

This function was introduced in Qt 5.9.

See also QtQml::qmlDebug and QtQml::qmlInfo.

Macro Documentation

QML_DECLARE_TYPE

Equivalent to Q_DECLARE_METATYPE(TYPE *) and Q_DECLARE_METATYPE(QQmlListProperty<TYPE>)

QML_DECLARE_TYPEINFO(Type, Flags)

Declares additional properties of the given Type as described by the specified Flags.

Current the only supported type info is QML_HAS_ATTACHED_PROPERTIES which declares that the Type supports attached properties.

© The Qt Company Ltd
Licensed under the GNU Free Documentation License, Version 1.3.
https://doc.qt.io/qt-5.12/qqmlengine.html