class OpenSSL::SSL::SSLSocket

Parent:
Object
Included modules:
OpenSSL::Buffering, OpenSSL::SSL::SocketForwarder

Attributes

context[R]

The SSLContext object used in this connection.

io[R]

The underlying IO object.

sync_close[RW]

Whether to close the underlying socket as well, when the SSL/TLS connection is shut down. This defaults to false.

to_io[R]

The underlying IO object.

Public Class Methods

new(io) → aSSLSocket Show source
new(io, ctx) → aSSLSocket
static VALUE
ossl_ssl_initialize(int argc, VALUE *argv, VALUE self)
{
    VALUE io, v_ctx, verify_cb;
    SSL *ssl;
    SSL_CTX *ctx;

    TypedData_Get_Struct(self, SSL, &ossl_ssl_type, ssl);
    if (ssl)
        ossl_raise(eSSLError, "SSL already initialized");

    if (rb_scan_args(argc, argv, "11", &io, &v_ctx) == 1)
        v_ctx = rb_funcall(cSSLContext, rb_intern("new"), 0);

    GetSSLCTX(v_ctx, ctx);
    rb_ivar_set(self, id_i_context, v_ctx);
    ossl_sslctx_setup(v_ctx);

    if (rb_respond_to(io, rb_intern("nonblock=")))
        rb_funcall(io, rb_intern("nonblock="), 1, Qtrue);
    rb_ivar_set(self, id_i_io, io);

    ssl = SSL_new(ctx);
    if (!ssl)
        ossl_raise(eSSLError, NULL);
    RTYPEDDATA_DATA(self) = ssl;

    SSL_set_ex_data(ssl, ossl_ssl_ex_ptr_idx, (void *)self);
    SSL_set_info_callback(ssl, ssl_info_cb);
    verify_cb = rb_attr_get(v_ctx, id_i_verify_callback);
    SSL_set_ex_data(ssl, ossl_ssl_ex_vcb_idx, (void *)verify_cb);

    rb_call_super(0, NULL);

    return self;
}

Creates a new SSL socket from io which must be a real IO object (not an IO-like object that responds to read/write).

If ctx is provided the SSL Sockets initial params will be taken from the context.

The OpenSSL::Buffering module provides additional IO methods.

This method will freeze the SSLContext if one is provided; however, session management is still allowed in the frozen SSLContext.

Public Instance Methods

accept → self Show source
static VALUE
ossl_ssl_accept(VALUE self)
{
    ossl_ssl_setup(self);

    return ossl_start_ssl(self, SSL_accept, "SSL_accept", Qfalse);
}

Waits for a SSL/TLS client to initiate a handshake. The handshake may be started after unencrypted data has been sent over the socket.

accept_nonblock([options]) → self Show source
static VALUE
ossl_ssl_accept_nonblock(int argc, VALUE *argv, VALUE self)
{
    VALUE opts;

    rb_scan_args(argc, argv, "0:", &opts);
    ossl_ssl_setup(self);

    return ossl_start_ssl(self, SSL_accept, "SSL_accept", opts);
}

Initiates the SSL/TLS handshake as a server in non-blocking manner.

# emulates blocking accept
begin
  ssl.accept_nonblock
rescue IO::WaitReadable
  IO.select([s2])
  retry
rescue IO::WaitWritable
  IO.select(nil, [s2])
  retry
end

By specifying `exception: false`, the options hash allows you to indicate that #accept_nonblock should not raise an IO::WaitReadable or IO::WaitWritable exception, but return the symbol :wait_readable or :wait_writable instead.

alpn_protocol → String | nil Show source
static VALUE
ossl_ssl_alpn_protocol(VALUE self)
{
    SSL *ssl;
    const unsigned char *out;
    unsigned int outlen;

    GetSSL(self, ssl);

    SSL_get0_alpn_selected(ssl, &out, &outlen);
    if (!outlen)
        return Qnil;
    else
        return rb_str_new((const char *) out, outlen);
}

Returns the ALPN protocol string that was finally selected by the server during the handshake.

cert → cert or nil Show source
static VALUE
ossl_ssl_get_cert(VALUE self)
{
    SSL *ssl;
    X509 *cert = NULL;

    GetSSL(self, ssl);

    /*
     * Is this OpenSSL bug? Should add a ref?
     * TODO: Ask for.
     */
    cert = SSL_get_certificate(ssl); /* NO DUPs => DON'T FREE. */

    if (!cert) {
        return Qnil;
    }
    return ossl_x509_new(cert);
}

The X509 certificate for this socket endpoint.

cipher → [name, version, bits, alg_bits] Show source
static VALUE
ossl_ssl_get_cipher(VALUE self)
{
    SSL *ssl;
    SSL_CIPHER *cipher;

    GetSSL(self, ssl);

    cipher = (SSL_CIPHER *)SSL_get_current_cipher(ssl);

    return ossl_ssl_cipher_to_ary(cipher);
}

The cipher being used for the current connection

client_ca → [x509name, ...] Show source
static VALUE
ossl_ssl_get_client_ca_list(VALUE self)
{
    SSL *ssl;
    STACK_OF(X509_NAME) *ca;

    GetSSL(self, ssl);

    ca = SSL_get_client_CA_list(ssl);
    return ossl_x509name_sk2ary(ca);
}

Returns the list of client CAs. Please note that in contrast to OpenSSL::SSL::SSLContext#client_ca no array of X509::Certificate is returned but X509::Name instances of the CA's subject distinguished name.

In server mode, returns the list set by OpenSSL::SSL::SSLContext#client_ca. In client mode, returns the list of client CAs sent from the server.

connect → self Show source
static VALUE
ossl_ssl_connect(VALUE self)
{
    ossl_ssl_setup(self);

    return ossl_start_ssl(self, SSL_connect, "SSL_connect", Qfalse);
}

Initiates an SSL/TLS handshake with a server. The handshake may be started after unencrypted data has been sent over the socket.

connect_nonblock([options]) → self Show source
static VALUE
ossl_ssl_connect_nonblock(int argc, VALUE *argv, VALUE self)
{
    VALUE opts;
    rb_scan_args(argc, argv, "0:", &opts);

    ossl_ssl_setup(self);

    return ossl_start_ssl(self, SSL_connect, "SSL_connect", opts);
}

Initiates the SSL/TLS handshake as a client in non-blocking manner.

# emulates blocking connect
begin
  ssl.connect_nonblock
rescue IO::WaitReadable
  IO.select([s2])
  retry
rescue IO::WaitWritable
  IO.select(nil, [s2])
  retry
end

By specifying `exception: false`, the options hash allows you to indicate that #connect_nonblock should not raise an IO::WaitReadable or IO::WaitWritable exception, but return the symbol :wait_readable or :wait_writable instead.

hostname = hostname → hostname Show source
static VALUE
ossl_ssl_set_hostname(VALUE self, VALUE arg)
{
    SSL *ssl;
    char *hostname = NULL;

    GetSSL(self, ssl);

    if (!NIL_P(arg))
        hostname = StringValueCStr(arg);

    if (!SSL_set_tlsext_host_name(ssl, hostname))
        ossl_raise(eSSLError, NULL);

    /* for SSLSocket#hostname */
    rb_ivar_set(self, id_i_hostname, arg);

    return arg;
}

Sets the server hostname used for SNI. This needs to be set before #connect.

npn_protocol → String | nil Show source
static VALUE
ossl_ssl_npn_protocol(VALUE self)
{
    SSL *ssl;
    const unsigned char *out;
    unsigned int outlen;

    GetSSL(self, ssl);

    SSL_get0_next_proto_negotiated(ssl, &out, &outlen);
    if (!outlen)
        return Qnil;
    else
        return rb_str_new((const char *) out, outlen);
}

Returns the protocol string that was finally selected by the client during the handshake.

peer_cert → cert or nil Show source
static VALUE
ossl_ssl_get_peer_cert(VALUE self)
{
    SSL *ssl;
    X509 *cert = NULL;
    VALUE obj;

    GetSSL(self, ssl);

    cert = SSL_get_peer_certificate(ssl); /* Adds a ref => Safe to FREE. */

    if (!cert) {
        return Qnil;
    }
    obj = ossl_x509_new(cert);
    X509_free(cert);

    return obj;
}

The X509 certificate for this socket's peer.

peer_cert_chain → [cert, ...] or nil Show source
static VALUE
ossl_ssl_get_peer_cert_chain(VALUE self)
{
    SSL *ssl;
    STACK_OF(X509) *chain;
    X509 *cert;
    VALUE ary;
    int i, num;

    GetSSL(self, ssl);

    chain = SSL_get_peer_cert_chain(ssl);
    if(!chain) return Qnil;
    num = sk_X509_num(chain);
    ary = rb_ary_new2(num);
    for (i = 0; i < num; i++){
        cert = sk_X509_value(chain, i);
        rb_ary_push(ary, ossl_x509_new(cert));
    }

    return ary;
}

The X509 certificate chain for this socket's peer.

pending → Integer Show source
static VALUE
ossl_ssl_pending(VALUE self)
{
    SSL *ssl;

    GetSSL(self, ssl);

    return INT2NUM(SSL_pending(ssl));
}

The number of bytes that are immediately available for reading.

post_connection_check(hostname) → true Show source
# File ext/openssl/lib/openssl/ssl.rb, line 279
def post_connection_check(hostname)
  if peer_cert.nil?
    msg = "Peer verification enabled, but no certificate received."
    if using_anon_cipher?
      msg += " Anonymous cipher suite #{cipher[0]} was negotiated. "                     "Anonymous suites must be disabled to use peer verification."
    end
    raise SSLError, msg
  end

  unless OpenSSL::SSL.verify_certificate_identity(peer_cert, hostname)
    raise SSLError, "hostname \"#{hostname}\" does not match the server certificate"
  end
  return true
end

Perform hostname verification following RFC 6125.

This method MUST be called after calling connect to ensure that the hostname of a remote peer has been verified.

session → aSession Show source
# File ext/openssl/lib/openssl/ssl.rb, line 300
def session
  SSL::Session.new(self)
rescue SSL::Session::SessionError
  nil
end

Returns the SSLSession object currently used, or nil if the session is not established.

session = session → session Show source
static VALUE
ossl_ssl_set_session(VALUE self, VALUE arg1)
{
    SSL *ssl;
    SSL_SESSION *sess;

    GetSSL(self, ssl);
    SafeGetSSLSession(arg1, sess);

    if (SSL_set_session(ssl, sess) != 1)
        ossl_raise(eSSLError, "SSL_set_session");

    return arg1;
}

Sets the Session to be used when the connection is established.

session_reused? → true | false Show source
static VALUE
ossl_ssl_session_reused(VALUE self)
{
    SSL *ssl;

    GetSSL(self, ssl);

    return SSL_session_reused(ssl) ? Qtrue : Qfalse;
}

Returns true if a reused session was negotiated during the handshake.

ssl_version → String Show source
static VALUE
ossl_ssl_get_version(VALUE self)
{
    SSL *ssl;

    GetSSL(self, ssl);

    return rb_str_new2(SSL_get_version(ssl));
}

Returns a String representing the SSL/TLS version that was negotiated for the connection, for example “TLSv1.2”.

state → string Show source
static VALUE
ossl_ssl_get_state(VALUE self)
{
    SSL *ssl;
    VALUE ret;

    GetSSL(self, ssl);

    ret = rb_str_new2(SSL_state_string(ssl));
    if (ruby_verbose) {
        rb_str_cat2(ret, ": ");
        rb_str_cat2(ret, SSL_state_string_long(ssl));
    }
    return ret;
}

A description of the current connection state. This is for diagnostic purposes only.

sysclose → nil Show source
# File ext/openssl/lib/openssl/ssl.rb, line 266
def sysclose
  return if closed?
  stop
  io.close if sync_close
end

Sends “close notify” to the peer and tries to shut down the SSL connection gracefully.

If #sync_close is set to true, the underlying IO is also closed.

sysread(length) → string Show source
sysread(length, buffer) → buffer
static VALUE
ossl_ssl_read(int argc, VALUE *argv, VALUE self)
{
    return ossl_ssl_read_internal(argc, argv, self, 0);
}

Reads length bytes from the SSL connection. If a pre-allocated buffer is provided the data will be written into it.

syswrite(string) → Integer Show source
static VALUE
ossl_ssl_write(VALUE self, VALUE str)
{
    return ossl_ssl_write_internal(self, str, Qfalse);
}

Writes string to the SSL connection.

tmp_key → PKey or nil Show source
static VALUE
ossl_ssl_tmp_key(VALUE self)
{
    SSL *ssl;
    EVP_PKEY *key;

    GetSSL(self, ssl);
    if (!SSL_get_server_tmp_key(ssl, &key))
        return Qnil;
    return ossl_pkey_new(key);
}

Returns the ephemeral key used in case of forward secrecy cipher.

verify_result → Integer Show source
static VALUE
ossl_ssl_get_verify_result(VALUE self)
{
    SSL *ssl;

    GetSSL(self, ssl);

    return INT2NUM(SSL_get_verify_result(ssl));
}

Returns the result of the peer certificates verification. See verify(1) for error values and descriptions.

If no peer certificate was presented X509_V_OK is returned.

Private Instance Methods

client_cert_cb() Show source
# File ext/openssl/lib/openssl/ssl.rb, line 314
def client_cert_cb
  @context.client_cert_cb
end
session_get_cb() Show source
# File ext/openssl/lib/openssl/ssl.rb, line 330
def session_get_cb
  @context.session_get_cb
end
session_new_cb() Show source
# File ext/openssl/lib/openssl/ssl.rb, line 326
def session_new_cb
  @context.session_new_cb
end
stop → nil Show source
static VALUE
ossl_ssl_stop(VALUE self)
{
    SSL *ssl;
    int ret;

    GetSSL(self, ssl);
    if (!ssl_started(ssl))
        return Qnil;
    ret = SSL_shutdown(ssl);
    if (ret == 1) /* Have already received close_notify */
        return Qnil;
    if (ret == 0) /* Sent close_notify, but we don't wait for reply */
        return Qnil;

    /*
     * XXX: Something happened. Possibly it failed because the underlying socket
     * is not writable/readable, since it is in non-blocking mode. We should do
     * some proper error handling using SSL_get_error() and maybe retry, but we
     * can't block here. Give up for now.
     */
    ossl_clear_error();
    return Qnil;
}

Sends “close notify” to the peer and tries to shut down the SSL connection gracefully.

sysread_nonblock(length) → string Show source
sysread_nonblock(length, buffer) → buffer
sysread_nonblock(length[, buffer [, opts]) → buffer
static VALUE
ossl_ssl_read_nonblock(int argc, VALUE *argv, VALUE self)
{
    return ossl_ssl_read_internal(argc, argv, self, 1);
}

A non-blocking version of sysread. Raises an SSLError if reading would block. If “exception: false” is passed, this method returns a symbol of :wait_readable, :wait_writable, or nil, rather than raising an exception.

Reads length bytes from the SSL connection. If a pre-allocated buffer is provided the data will be written into it.

syswrite_nonblock(string) → Integer Show source
static VALUE
ossl_ssl_write_nonblock(int argc, VALUE *argv, VALUE self)
{
    VALUE str, opts;

    rb_scan_args(argc, argv, "1:", &str, &opts);

    return ossl_ssl_write_internal(self, str, opts);
}

Writes string to the SSL connection in a non-blocking manner. Raises an SSLError if writing would block.

tmp_dh_callback() Show source
# File ext/openssl/lib/openssl/ssl.rb, line 318
def tmp_dh_callback
  @context.tmp_dh_callback || OpenSSL::PKey::DEFAULT_TMP_DH_CALLBACK
end
tmp_ecdh_callback() Show source
# File ext/openssl/lib/openssl/ssl.rb, line 322
def tmp_ecdh_callback
  @context.tmp_ecdh_callback
end
using_anon_cipher?() Show source
# File ext/openssl/lib/openssl/ssl.rb, line 308
def using_anon_cipher?
  ctx = OpenSSL::SSL::SSLContext.new
  ctx.ciphers = "aNULL"
  ctx.ciphers.include?(cipher)
end

Ruby Core © 1993–2017 Yukihiro Matsumoto
Licensed under the Ruby License.
Ruby Standard Library © contributors
Licensed under their own licenses.