class Net::SMTP

Parent:
Net::Protocol

What is This Library?

This library provides functionality to send internet mail via SMTP, the Simple Mail Transfer Protocol. For details of SMTP itself, see [RFC2821] (www.ietf.org/rfc/rfc2821.txt).

What is This Library NOT?

This library does NOT provide functions to compose internet mails. You must create them by yourself. If you want better mail support, try RubyMail or TMail or search for alternatives in RubyGems.org or The Ruby Toolbox.

FYI: the official documentation on internet mail is: [RFC2822] (www.ietf.org/rfc/rfc2822.txt).

Examples

Sending Messages

You must open a connection to an SMTP server before sending messages. The first argument is the address of your SMTP server, and the second argument is the port number. Using ::start with a block is the simplest way to do this. This way, the SMTP connection is closed automatically after the block is executed.

require 'net/smtp'
Net::SMTP.start('your.smtp.server', 25) do |smtp|
  # Use the SMTP object smtp only in this block.
end

Replace 'your.smtp.server' with your SMTP server. Normally your system manager or internet provider supplies a server for you.

Then you can send messages.

msgstr = <<END_OF_MESSAGE
From: Your Name <[email protected]>
To: Destination Address <[email protected]>
Subject: test message
Date: Sat, 23 Jun 2001 16:26:43 +0900
Message-Id: <[email protected]>

This is a test message.
END_OF_MESSAGE

require 'net/smtp'
Net::SMTP.start('your.smtp.server', 25) do |smtp|
  smtp.send_message msgstr,
                    '[email protected]',
                    '[email protected]'
end

Closing the Session

You MUST close the SMTP session after sending messages, by calling the finish method:

# using SMTP#finish
smtp = Net::SMTP.start('your.smtp.server', 25)
smtp.send_message msgstr, 'from@address', 'to@address'
smtp.finish

You can also use the block form of ::start/SMTP#start. This closes the SMTP session automatically:

# using block form of SMTP.start
Net::SMTP.start('your.smtp.server', 25) do |smtp|
  smtp.send_message msgstr, 'from@address', 'to@address'
end

I strongly recommend this scheme. This form is simpler and more robust.

HELO domain

In almost all situations, you must provide a third argument to ::start/SMTP#start. This is the domain name which you are on (the host to send mail from). It is called the “HELO domain”. The SMTP server will judge whether it should send or reject the SMTP session by inspecting the HELO domain.

Net::SMTP.start('your.smtp.server', 25,
                'mail.from.domain') { |smtp| ... }

SMTP Authentication

The Net::SMTP class supports three authentication schemes; PLAIN, LOGIN and CRAM MD5. (SMTP Authentication: [RFC2554]) To use SMTP authentication, pass extra arguments to ::start/SMTP#start.

# PLAIN
Net::SMTP.start('your.smtp.server', 25, 'mail.from.domain',
                'Your Account', 'Your Password', :plain)
# LOGIN
Net::SMTP.start('your.smtp.server', 25, 'mail.from.domain',
                'Your Account', 'Your Password', :login)

# CRAM MD5
Net::SMTP.start('your.smtp.server', 25, 'mail.from.domain',
                'Your Account', 'Your Password', :cram_md5)

Constants

CRAM_BUFSIZE
DEFAULT_AUTH_TYPE

Authentication

IMASK
OMASK
Revision

Attributes

address[R]

The address of the SMTP server to connect to.

esmtp[RW]

Set whether to use ESMTP or not. This should be done before calling start. Note that if start is called in ESMTP mode, and the connection fails due to a ProtocolError, the SMTP object will automatically switch to plain SMTP mode and retry (but not vice versa).

esmtp?[RW]

Set whether to use ESMTP or not. This should be done before calling start. Note that if start is called in ESMTP mode, and the connection fails due to a ProtocolError, the SMTP object will automatically switch to plain SMTP mode and retry (but not vice versa).

open_timeout[RW]

Seconds to wait while attempting to open a connection. If the connection cannot be opened within this time, a Net::OpenTimeout is raised. The default value is 30 seconds.

port[R]

The port number of the SMTP server to connect to.

read_timeout[R]

Seconds to wait while reading one block (by one read(2) call). If the read(2) call does not complete within this time, a Net::ReadTimeout is raised. The default value is 60 seconds.

Public Class Methods

default_port() Show source
# File lib/net/smtp.rb, line 174
def SMTP.default_port
  25
end

The default SMTP port number, 25.

default_ssl_context() Show source
# File lib/net/smtp.rb, line 192
def SMTP.default_ssl_context
  OpenSSL::SSL::SSLContext.new
end
default_ssl_port()
Alias for: default_tls_port
default_submission_port() Show source
# File lib/net/smtp.rb, line 179
def SMTP.default_submission_port
  587
end

The default mail submission port number, 587.

default_tls_port() Show source
# File lib/net/smtp.rb, line 184
def SMTP.default_tls_port
  465
end

The default SMTPS port number, 465.

Also aliased as: default_ssl_port
new(address, port = nil) Show source
# File lib/net/smtp.rb, line 207
def initialize(address, port = nil)
  @address = address
  @port = (port || SMTP.default_port)
  @esmtp = true
  @capabilities = nil
  @socket = nil
  @started = false
  @open_timeout = 30
  @read_timeout = 60
  @error_occurred = false
  @debug_output = nil
  @tls = false
  @starttls = false
  @ssl_context = nil
end

Creates a new Net::SMTP object.

address is the hostname or ip address of your SMTP server. port is the port to connect to; it defaults to port 25.

This method does not open the TCP connection. You can use ::start instead of ::new if you want to do everything at once. Otherwise, follow ::new with #start.

start(address, port = nil, helo = 'localhost', user = nil, secret = nil, authtype = nil) { |smtp| ... } Show source
# File lib/net/smtp.rb, line 451
def SMTP.start(address, port = nil, helo = 'localhost',
               user = nil, secret = nil, authtype = nil,
               &block)   # :yield: smtp
  new(address, port).start(helo, user, secret, authtype, &block)
end

Creates a new Net::SMTP object and connects to the server.

This method is equivalent to:

Net::SMTP.new(address, port).start(helo_domain, account, password, authtype)

Example

Net::SMTP.start('your.smtp.server') do |smtp|
  smtp.send_message msgstr, '[email protected]', ['[email protected]']
end

Block Usage

If called with a block, the newly-opened Net::SMTP object is yielded to the block, and automatically closed when the block finishes. If called without a block, the newly-opened Net::SMTP object is returned to the caller, and it is the caller's responsibility to close it when finished.

Parameters

address is the hostname or ip address of your smtp server.

port is the port to connect to; it defaults to port 25.

helo is the HELO domain provided by the client to the server (see overview comments); it defaults to 'localhost'.

The remaining arguments are used for SMTP authentication, if required or desired. user is the account name; secret is your password or other authentication token; and authtype is the authentication type, one of :plain, :login, or :cram_md5. See the discussion of SMTP Authentication in the overview notes.

Errors

This method may raise:

Public Instance Methods

auth_cram_md5(user, secret) Show source
# File lib/net/smtp.rb, line 750
def auth_cram_md5(user, secret)
  check_auth_args user, secret
  res = critical {
    res0 = get_response('AUTH CRAM-MD5')
    check_auth_continue res0
    crammed = cram_md5_response(secret, res0.cram_md5_challenge)
    get_response(base64_encode("#{user} #{crammed}"))
  }
  check_auth_response res
  res
end
auth_login(user, secret) Show source
# File lib/net/smtp.rb, line 739
def auth_login(user, secret)
  check_auth_args user, secret
  res = critical {
    check_auth_continue get_response('AUTH LOGIN')
    check_auth_continue get_response(base64_encode(user))
    get_response(base64_encode(secret))
  }
  check_auth_response res
  res
end
auth_plain(user, secret) Show source
# File lib/net/smtp.rb, line 730
def auth_plain(user, secret)
  check_auth_args user, secret
  res = critical {
    get_response('AUTH PLAIN ' + base64_encode("\0#{user}\0#{secret}"))
  }
  check_auth_response res
  res
end
authenticate(user, secret, authtype = DEFAULT_AUTH_TYPE) Show source
# File lib/net/smtp.rb, line 724
def authenticate(user, secret, authtype = DEFAULT_AUTH_TYPE)
  check_auth_method authtype
  check_auth_args user, secret
  send auth_method(authtype), user, secret
end
capable_auth_types() Show source
# File lib/net/smtp.rb, line 279
def capable_auth_types
  return [] unless @capabilities
  return [] unless @capabilities['AUTH']
  @capabilities['AUTH']
end

Returns supported authentication methods on this server. You cannot get valid value before opening SMTP session.

capable_cram_md5_auth?() Show source
# File lib/net/smtp.rb, line 266
def capable_cram_md5_auth?
  auth_capable?('CRAM-MD5')
end

true if server advertises AUTH CRAM-MD5. You cannot get valid value before opening SMTP session.

capable_login_auth?() Show source
# File lib/net/smtp.rb, line 260
def capable_login_auth?
  auth_capable?('LOGIN')
end

true if server advertises AUTH LOGIN. You cannot get valid value before opening SMTP session.

capable_plain_auth?() Show source
# File lib/net/smtp.rb, line 254
def capable_plain_auth?
  auth_capable?('PLAIN')
end

true if server advertises AUTH PLAIN. You cannot get valid value before opening SMTP session.

capable_starttls?() Show source
# File lib/net/smtp.rb, line 242
def capable_starttls?
  capable?('STARTTLS')
end

true if server advertises STARTTLS. You cannot get valid value before opening SMTP session.

data(msgstr = nil) { |stream| ... } Show source
# File lib/net/smtp.rb, line 890
def data(msgstr = nil, &block)   #:yield: stream
  if msgstr and block
    raise ArgumentError, "message and block are exclusive"
  end
  unless msgstr or block
    raise ArgumentError, "message or block is required"
  end
  res = critical {
    check_continue get_response('DATA')
    socket_sync_bak = @socket.io.sync
    begin
      @socket.io.sync = false
      if msgstr
        @socket.write_message msgstr
      else
        @socket.write_message_by_block(&block)
      end
    ensure
      @socket.io.flush
      @socket.io.sync = socket_sync_bak
    end
    recv_response()
  }
  check_response res
  res
end

This method sends a message. If msgstr is given, sends it as a message. If block is given, yield a message writer stream. You must write message before the block is closed.

# Example 1 (by string)
smtp.data(<<EndMessage)
From: [email protected]
To: [email protected]
Subject: I found a bug

Check vm.c:58879.
EndMessage

# Example 2 (by block)
smtp.data {|f|
  f.puts "From: [email protected]"
  f.puts "To: [email protected]"
  f.puts "Subject: I found a bug"
  f.puts ""
  f.puts "Check vm.c:58879."
}
debug_output=(arg) Show source
# File lib/net/smtp.rb, line 392
def debug_output=(arg)
  @debug_output = arg
end

WARNING: This method causes serious security holes. Use this method for only debugging.

Set an output stream for debug logging. You must call this before start.

# example
smtp = Net::SMTP.new(addr, port)
smtp.set_debug_output $stderr
smtp.start do |smtp|
  ....
end
Also aliased as: set_debug_output
disable_ssl()
Alias for: disable_tls
disable_starttls() Show source
# File lib/net/smtp.rb, line 350
def disable_starttls
  @starttls = false
  @ssl_context = nil
end

Disables SMTP/TLS (STARTTLS) for this object. Must be called before the connection is established to have any effect.

disable_tls() Show source
# File lib/net/smtp.rb, line 306
def disable_tls
  @tls = false
  @ssl_context = nil
end

Disables SMTP/TLS for this object. Must be called before the connection is established to have any effect.

Also aliased as: disable_ssl
ehlo(domain) Show source
# File lib/net/smtp.rb, line 828
def ehlo(domain)
  getok("EHLO #{domain}")
end
enable_ssl(context = SMTP.default_ssl_context)
Alias for: enable_tls
enable_starttls(context = SMTP.default_ssl_context) Show source
# File lib/net/smtp.rb, line 332
def enable_starttls(context = SMTP.default_ssl_context)
  raise 'openssl library not installed' unless defined?(OpenSSL)
  raise ArgumentError, "SMTPS and STARTTLS is exclusive" if @tls
  @starttls = :always
  @ssl_context = context
end

Enables SMTP/TLS (STARTTLS) for this object. context is a OpenSSL::SSL::SSLContext object.

enable_starttls_auto(context = SMTP.default_ssl_context) Show source
# File lib/net/smtp.rb, line 341
def enable_starttls_auto(context = SMTP.default_ssl_context)
  raise 'openssl library not installed' unless defined?(OpenSSL)
  raise ArgumentError, "SMTPS and STARTTLS is exclusive" if @tls
  @starttls = :auto
  @ssl_context = context
end

Enables SMTP/TLS (STARTTLS) for this object if server accepts. context is a OpenSSL::SSL::SSLContext object.

enable_tls(context = SMTP.default_ssl_context) Show source
# File lib/net/smtp.rb, line 295
def enable_tls(context = SMTP.default_ssl_context)
  raise 'openssl library not installed' unless defined?(OpenSSL)
  raise ArgumentError, "SMTPS and STARTTLS is exclusive" if @starttls
  @tls = true
  @ssl_context = context
end

Enables SMTP/TLS (SMTPS: SMTP over direct TLS connection) for this object. Must be called before the connection is established to have any effect. context is a OpenSSL::SSL::SSLContext object.

Also aliased as: enable_ssl
finish() Show source
# File lib/net/smtp.rb, line 530
def finish
  raise IOError, 'not yet started' unless started?
  do_finish
end

Finishes the SMTP session and closes TCP connection. Raises IOError if not started.

helo(domain) Show source
# File lib/net/smtp.rb, line 824
def helo(domain)
  getok("HELO #{domain}")
end
inspect() Show source
# File lib/net/smtp.rb, line 224
def inspect
  "#<#{self.class} #{@address}:#{@port} started=#{@started}>"
end

Provide human-readable stringification of class state.

mailfrom(from_addr) Show source
# File lib/net/smtp.rb, line 832
def mailfrom(from_addr)
  if $SAFE > 0
    raise SecurityError, 'tainted from_addr' if from_addr.tainted?
  end
  getok("MAIL FROM:<#{from_addr}>")
end
open_message_stream(from_addr, *to_addrs) { |stream| ... } Show source
# File lib/net/smtp.rb, line 708
def open_message_stream(from_addr, *to_addrs, &block)   # :yield: stream
  raise IOError, 'closed session' unless @socket
  mailfrom from_addr
  rcptto_list(to_addrs) {data(&block)}
end

Opens a message writer stream and gives it to the block. The stream is valid only in the block, and has these methods:

puts(str = '')

outputs STR and CR LF.

print(str)

outputs STR.

printf(fmt, *args)

outputs sprintf(fmt,*args).

write(str)

outputs STR and returns the length of written bytes.

<<(str)

outputs STR and returns self.

If a single CR (“r”) or LF (“n”) is found in the message, it is converted to the CR LF pair. You cannot send a binary message with this method.

Parameters

from_addr is a String representing the source mail address.

to_addr is a String or Strings or Array of Strings, representing the destination mail address or addresses.

Example

Net::SMTP.start('smtp.example.com', 25) do |smtp|
  smtp.open_message_stream('[email protected]', ['[email protected]']) do |f|
    f.puts 'From: [email protected]'
    f.puts 'To: [email protected]'
    f.puts 'Subject: test message'
    f.puts
    f.puts 'This is a test message.'
  end
end

Errors

This method may raise:

Also aliased as: ready
quit() Show source
# File lib/net/smtp.rb, line 917
def quit
  getok('QUIT')
end
rcptto(to_addr) Show source
# File lib/net/smtp.rb, line 860
def rcptto(to_addr)
  if $SAFE > 0
    raise SecurityError, 'tainted to_addr' if to_addr.tainted?
  end
  getok("RCPT TO:<#{to_addr}>")
end
rcptto_list(to_addrs) { || ... } Show source
# File lib/net/smtp.rb, line 839
def rcptto_list(to_addrs)
  raise ArgumentError, 'mail destination not given' if to_addrs.empty?
  ok_users = []
  unknown_users = []
  to_addrs.flatten.each do |addr|
    begin
      rcptto addr
    rescue SMTPAuthenticationError
      unknown_users << addr.dump
    else
      ok_users << addr
    end
  end
  raise ArgumentError, 'mail destination not given' if ok_users.empty?
  ret = yield
  unless unknown_users.empty?
    raise SMTPAuthenticationError, "failed to deliver for #{unknown_users.join(', ')}"
  end
  ret
end
read_timeout=(sec) Show source
# File lib/net/smtp.rb, line 373
def read_timeout=(sec)
  @socket.read_timeout = sec if @socket
  @read_timeout = sec
end

Set the number of seconds to wait until timing-out a read(2) call.

ready(from_addr, *to_addrs)
Alias for: open_message_stream
rset() Show source
# File lib/net/smtp.rb, line 816
def rset
  getok('RSET')
end

Aborts the current mail transaction

send_mail(msgstr, from_addr, *to_addrs)
Alias for: send_message
send_message(msgstr, from_addr, *to_addrs) Show source
# File lib/net/smtp.rb, line 655
def send_message(msgstr, from_addr, *to_addrs)
  raise IOError, 'closed session' unless @socket
  mailfrom from_addr
  rcptto_list(to_addrs) {data msgstr}
end

Sends msgstr as a message. Single CR (“r”) and LF (“n”) found in the msgstr, are converted into the CR LF pair. You cannot send a binary message with this method. msgstr should include both the message headers and body.

from_addr is a String representing the source mail address.

to_addr is a String or Strings or Array of Strings, representing the destination mail address or addresses.

Example

Net::SMTP.start('smtp.example.com') do |smtp|
  smtp.send_message msgstr,
                    '[email protected]',
                    ['[email protected]', '[email protected]']
end

Errors

This method may raise:

Also aliased as: send_mail, sendmail
sendmail(msgstr, from_addr, *to_addrs)
Alias for: send_message
set_debug_output(arg)
Alias for: debug_output=
ssl?()
Alias for: tls?
start(helo = 'localhost', user = nil, secret = nil, authtype = nil) { |smtp| ... } Show source
# File lib/net/smtp.rb, line 513
def start(helo = 'localhost',
          user = nil, secret = nil, authtype = nil)   # :yield: smtp
  if block_given?
    begin
      do_start helo, user, secret, authtype
      return yield(self)
    ensure
      do_finish
    end
  else
    do_start helo, user, secret, authtype
    return self
  end
end

Opens a TCP connection and starts the SMTP session.

Parameters

helo is the HELO domain that you'll dispatch mails from; see the discussion in the overview notes.

If both of user and secret are given, SMTP authentication will be attempted using the AUTH command. authtype specifies the type of authentication to attempt; it must be one of :login, :plain, and :cram_md5. See the notes on SMTP Authentication in the overview.

Block Usage

When this methods is called with a block, the newly-started SMTP object is yielded to the block, and automatically closed after the block call finishes. Otherwise, it is the caller's responsibility to close the session when finished.

Example

This is very similar to the class method ::start.

require 'net/smtp'
smtp = Net::SMTP.new('smtp.mail.server', 25)
smtp.start(helo_domain, account, password, authtype) do |smtp|
  smtp.send_message msgstr, '[email protected]', ['[email protected]']
end

The primary use of this method (as opposed to ::start) is probably to set debugging (#set_debug_output) or ESMTP (#esmtp=), which must be done before the session is started.

Errors

If session has already been started, an IOError will be raised.

This method may raise:

started?() Show source
# File lib/net/smtp.rb, line 458
def started?
  @started
end

true if the SMTP session has been started.

starttls() Show source
# File lib/net/smtp.rb, line 820
def starttls
  getok('STARTTLS')
end
starttls?() Show source
# File lib/net/smtp.rb, line 316
def starttls?
  @starttls
end

Returns truth value if this object uses STARTTLS. If this object always uses STARTTLS, returns :always. If this object uses STARTTLS when the server support TLS, returns :auto.

starttls_always?() Show source
# File lib/net/smtp.rb, line 321
def starttls_always?
  @starttls == :always
end

true if this object uses STARTTLS.

starttls_auto?() Show source
# File lib/net/smtp.rb, line 326
def starttls_auto?
  @starttls == :auto
end

true if this object uses STARTTLS when server advertises STARTTLS.

tls?() Show source
# File lib/net/smtp.rb, line 286
def tls?
  @tls
end

true if this object uses SMTP/TLS (SMTPS).

Also aliased as: ssl?

Private Instance Methods

auth_capable?(type) Show source
# File lib/net/smtp.rb, line 270
def auth_capable?(type)
  return nil unless @capabilities
  return false unless @capabilities['AUTH']
  @capabilities['AUTH'].include?(type)
end
auth_method(type) Show source
# File lib/net/smtp.rb, line 770
def auth_method(type)
  "auth_#{type.to_s.downcase}".intern
end
base64_encode(str) Show source
# File lib/net/smtp.rb, line 783
def base64_encode(str)
  # expects "str" may not become too long
  [str].pack('m0')
end
capable?(key) Show source
# File lib/net/smtp.rb, line 246
def capable?(key)
  return nil unless @capabilities
  @capabilities[key] ? true : false
end
check_auth_args(user, secret, authtype = DEFAULT_AUTH_TYPE) Show source
# File lib/net/smtp.rb, line 774
def check_auth_args(user, secret, authtype = DEFAULT_AUTH_TYPE)
  unless user
    raise ArgumentError, 'SMTP-AUTH requested but missing user name'
  end
  unless secret
    raise ArgumentError, 'SMTP-AUTH requested but missing secret phrase'
  end
end
check_auth_continue(res) Show source
# File lib/net/smtp.rb, line 984
def check_auth_continue(res)
  unless res.continue?
    raise res.exception_class, res.message
  end
end
check_auth_method(type) Show source
# File lib/net/smtp.rb, line 764
def check_auth_method(type)
  unless respond_to?(auth_method(type), true)
    raise ArgumentError, "wrong authentication type #{type}"
  end
end
check_auth_response(res) Show source
# File lib/net/smtp.rb, line 978
def check_auth_response(res)
  unless res.success?
    raise SMTPAuthenticationError, res.message
  end
end
check_continue(res) Show source
# File lib/net/smtp.rb, line 972
def check_continue(res)
  unless res.continue?
    raise SMTPUnknownError, "could not get 3xx (#{res.status}: #{res.string})"
  end
end
check_response(res) Show source
# File lib/net/smtp.rb, line 966
def check_response(res)
  unless res.success?
    raise res.exception_class, res.message
  end
end
cram_md5_response(secret, challenge) Show source
# File lib/net/smtp.rb, line 792
def cram_md5_response(secret, challenge)
  tmp = Digest::MD5.digest(cram_secret(secret, IMASK) + challenge)
  Digest::MD5.hexdigest(cram_secret(secret, OMASK) + tmp)
end

CRAM-MD5: [RFC2195]

cram_secret(secret, mask) Show source
# File lib/net/smtp.rb, line 799
def cram_secret(secret, mask)
  secret = Digest::MD5.digest(secret) if secret.size > CRAM_BUFSIZE
  buf = secret.ljust(CRAM_BUFSIZE, "\0")
  0.upto(buf.size - 1) do |i|
    buf[i] = (buf[i].ord ^ mask).chr
  end
  buf
end
critical() { || ... } Show source
# File lib/net/smtp.rb, line 956
def critical
  return Response.parse('200 dummy reply code') if @error_occurred
  begin
    return yield()
  rescue Exception
    @error_occurred = true
    raise
  end
end
do_finish() Show source
# File lib/net/smtp.rb, line 610
def do_finish
  quit if @socket and not @socket.closed? and not @error_occurred
ensure
  @started = false
  @error_occurred = false
  @socket.close if @socket
  @socket = nil
end
do_helo(helo_domain) Show source
# File lib/net/smtp.rb, line 598
def do_helo(helo_domain)
  res = @esmtp ? ehlo(helo_domain) : helo(helo_domain)
  @capabilities = res.capabilities
rescue SMTPError
  if @esmtp
    @esmtp = false
    @error_occurred = false
    retry
  end
  raise
end
do_start(helo_domain, user, secret, authtype) Show source
# File lib/net/smtp.rb, line 541
def do_start(helo_domain, user, secret, authtype)
  raise IOError, 'SMTP session already started' if @started
  if user or secret
    check_auth_method(authtype || DEFAULT_AUTH_TYPE)
    check_auth_args user, secret
  end
  s = Timeout.timeout(@open_timeout, Net::OpenTimeout) do
    tcp_socket(@address, @port)
  end
  logging "Connection opened: #{@address}:#{@port}"
  @socket = new_internet_message_io(tls? ? tlsconnect(s) : s)
  check_response critical { recv_response() }
  do_helo helo_domain
  if starttls_always? or (capable_starttls? and starttls_auto?)
    unless capable_starttls?
      raise SMTPUnsupportedCommand,
          "STARTTLS is not supported on this server"
    end
    starttls
    @socket = new_internet_message_io(tlsconnect(s))
    # helo response may be different after STARTTLS
    do_helo helo_domain
  end
  authenticate user, secret, (authtype || DEFAULT_AUTH_TYPE) if user
  @started = true
ensure
  unless @started
    # authentication failed, cancel connection.
    s.close if s
    @socket = nil
  end
end
get_response(reqline) Show source
# File lib/net/smtp.rb, line 940
def get_response(reqline)
  validate_line reqline
  @socket.writeline reqline
  recv_response()
end
getok(reqline) Show source
# File lib/net/smtp.rb, line 930
def getok(reqline)
  validate_line reqline
  res = critical {
    @socket.writeline reqline
    recv_response()
  }
  check_response res
  res
end
logging(msg) Show source
# File lib/net/smtp.rb, line 1069
def logging(msg)
  @debug_output << msg + "\n" if @debug_output
end
new_internet_message_io(s) Show source
# File lib/net/smtp.rb, line 593
def new_internet_message_io(s)
  InternetMessageIO.new(s, read_timeout: @read_timeout,
                        debug_output: @debug_output)
end
recv_response() Show source
# File lib/net/smtp.rb, line 946
def recv_response
  buf = ''.dup
  while true
    line = @socket.readline
    buf << line << "\n"
    break unless line[3,1] == '-'   # "210-PIPELINING"
  end
  Response.parse(buf)
end
ssl_socket(socket, context) Show source
# File lib/net/smtp.rb, line 574
def ssl_socket(socket, context)
  OpenSSL::SSL::SSLSocket.new socket, context
end
tcp_socket(address, port) Show source
# File lib/net/smtp.rb, line 537
def tcp_socket(address, port)
  TCPSocket.open address, port
end
tlsconnect(s) Show source
# File lib/net/smtp.rb, line 578
def tlsconnect(s)
  verified = false
  s = ssl_socket(s, @ssl_context)
  logging "TLS connection started"
  s.sync_close = true
  ssl_socket_connect(s, @open_timeout)
  if @ssl_context.verify_mode != OpenSSL::SSL::VERIFY_NONE
    s.post_connection_check(@address)
  end
  verified = true
  s
ensure
  s.close unless verified
end
validate_line(line) Show source
# File lib/net/smtp.rb, line 923
def validate_line(line)
  # A bare CR or LF is not allowed in RFC5321.
  if /[\r\n]/ =~ line
    raise ArgumentError, "A line must not contain CR or LF"
  end
end

Ruby Core © 1993–2017 Yukihiro Matsumoto
Licensed under the Ruby License.
Ruby Standard Library © contributors
Licensed under their own licenses.