na_ontap_interface – NetApp ONTAP LIF configuration

New in version 2.6.

Synopsis

  • Creating / deleting and modifying the LIF.

Requirements

The below requirements are needed on the host that executes this module.

  • A physical or virtual clustered Data ONTAP system. The modules were developed with Clustered Data ONTAP 9.3
  • Ansible 2.6
  • netapp-lib (2017.10.30). Install using ‘pip install netapp-lib’
  • To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’

Parameters

Parameter Choices/Defaults Comments
address
-
Specifies the LIF's IP address.
Required when state=present
admin_status
-
    Choices:
  • up
  • down
Specifies the administrative status of the LIF.
failover_policy
-
Specifies the failover policy for the LIF.
firewall_policy
-
Specifies the firewall policy for the LIF.
home_node
-
Specifies the LIF's home node.
Required when state=present.
home_port
-
Specifies the LIF's home port.
Required when state=present
hostname
- / required
The hostname or IP address of the ONTAP instance.
http_port
integer
Override the default port (80 or 443) with this port
https
boolean
    Choices:
  • no
  • yes
Enable and disable https
interface_name
- / required
Specifies the logical interface (LIF) name.
is_auto_revert
-
If true, data LIF will revert to its home node under certain circumstances such as startup, and load balancing migration capability is disabled automatically
netmask
-
Specifies the LIF's netmask.
Required when state=present.
password
- / required
Password for the specified user.

aliases: pass
protocols
-
Specifies the list of data protocols configured on the LIF. By default, the values in this element are nfs, cifs and fcache. Other supported protocols are iscsi and fcp. A LIF can be configured to not support any data protocols by specifying 'none'. Protocol values of none, iscsi or fcp can't be combined with any other data protocol(s).
role
-
Specifies the role of the LIF.
Required when state=present.
state
-
    Choices:
  • present
  • absent
Whether the specified interface should exist or not.
username
- / required
This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required. For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/.

aliases: user
validate_certs
boolean
    Choices:
  • no
  • yes
If set to False, the SSL certificates will not be validated.
This should only set to False used on personally controlled sites using self-signed certificates.
vserver
- / required
The name of the vserver to use.

Notes

Note

  • The modules prefixed with na_ontap are built to support the ONTAP storage platform.

Examples

- name: Create interface
  na_ontap_interface:
    state: present
    interface_name: data2
    home_port: e0d
    home_node: laurentn-vsim1
    role: data
    protocols: nfs
    admin_status: up
    failover_policy: local-only
    firewall_policy: mgmt
    is_auto_revert: true
    address: 10.10.10.10
    netmask: 255.255.255.0
    vserver: svm1
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"

- name: Delete interface
  na_ontap_interface:
    state: absent
    interface_name: data2
    vserver: svm1
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"

Status

Authors

Hint

If you notice any issues in this documentation you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.7/modules/na_ontap_interface_module.html