ce_ospf_vrf - Manages configuration of an OSPF VPN instance on HUAWEI CloudEngine switches.

New in version 2.4.

Synopsis

  • Manages configuration of an OSPF VPN instance on HUAWEI CloudEngine switches.

Options

parameter required default choices comments
bandwidth
no
Specifies the reference bandwidth used to assign ospf cost. Valid values are an integer, in Mbps, 1 - 2147483648, the default value is 100.
description
no
Specifies the description information of ospf process.
lsaaholdinterval
no
Specifies the hold interval of arrive LSA when use the intelligent timer. Valid value is an integer, in millisecond, from 0 to 10000, the default value is 500.
lsaainterval
no
Specifies the interval of arrive LSA when use the general timer. Valid value is an integer, in millisecond, from 0 to 10000.
lsaalflag
no
Specifies the mode of timer to calculate interval of arrive LSA. If set the parameter but not specifies value, the default will be used. If true use general timer. If false use intelligent timer.
lsaamaxinterval
no
Specifies the max interval of arrive LSA when use the intelligent timer. Valid value is an integer, in millisecond, from 0 to 10000, the default value is 1000.
lsaastartinterval
no
Specifies the start interval of arrive LSA when use the intelligent timer. Valid value is an integer, in millisecond, from 0 to 10000, the default value is 500.
lsaoholdinterval
no
Specifies the hold interval of originate LSA . Valid value is an integer, in millisecond, from 0 to 5000, the default value is 1000.
lsaointerval
no
Specifies the interval of originate LSA . Valid value is an integer, in second, from 0 to 10, the default value is 5.
lsaointervalflag
no
Specifies whether cancel the interval of LSA originate or not. If set the parameter but noe specifies value, the default will be used. true:cancel the interval of LSA originate, the interval is 0. false:do not cancel the interval of LSA originate.
lsaomaxinterval
no
Specifies the max interval of originate LSA . Valid value is an integer, in millisecond, from 1 to 10000, the default value is 5000.
lsaostartinterval
no
Specifies the start interval of originate LSA . Valid value is an integer, in millisecond, from 0 to 1000, the default value is 500.
ospf
yes
The ID of the ospf process. Valid values are an integer, 1 - 4294967295, the default value is 1.
route_id
no
Specifies the ospf private route id,. Valid values are a string, formatted as an IP address (i.e. "10.1.1.1") the length is 0 - 20.
spfholdinterval
no
Specifies the hold interval to calculate SPF when use intelligent timer. Valid value is an integer, in millisecond, from 1 to 5000, the default value is 200.
spfinterval
no
Specifies the interval to calculate SPF when use second level timer. Valid value is an integer, in second, from 1 to 10.
spfintervalmi
no
Specifies the interval to calculate SPF when use millisecond level timer. Valid value is an integer, in millisecond, from 1 to 10000.
spfintervaltype
no intelligent-timer
  • intelligent-timer
  • timer
  • millisecond
Specifies the mode of timer which used to calculate SPF. If set the parameter but noe specifies value, the default will be used. If is intelligent-timer, then use intelligent timer. If is timer, then use second level timer. If is millisecond, then use millisecond level timer.
spfmaxinterval
no
Specifies the max interval to calculate SPF when use intelligent timer. Valid value is an integer, in millisecond, from 1 to 20000, the default value is 5000.
spfstartinterval
no
Specifies the start interval to calculate SPF when use intelligent timer. Valid value is an integer, in millisecond, from 1 to 1000, the default value is 50.
state
no present
  • present
  • absent
Specify desired state of the resource.
vrf
no _public_
Specifies the vpn instance which use ospf,length is 1 - 31. Valid values are a string.

Examples

- name: ospf vrf module test
  hosts: cloudengine
  connection: local
  gather_facts: no
  vars:
    cli:
      host: "{{ inventory_hostname }}"
      port: "{{ ansible_ssh_port }}"
      username: "{{ username }}"
      password: "{{ password }}"
      transport: cli

  tasks:

  - name: Configure ospf route id
    ce_ospf_vrf:
      ospf: 2
      route_id: 2.2.2.2
      lsaointervalflag: False
      lsaointerval: 2
      provider: "{{ cli }}"

Return Values

Common return values are documented here Return Values, the following are the fields unique to this module:

name description returned type sample
changed
check to see if a change was made on the device
always boolean False
end_state
k/v pairs of configuration after module execution
verbose mode dict {'processId': '2', 'vrfName': '_public_', 'description': None, 'bandwidthReference': '100', 'spfScheduleMaxInterval': '10000', 'lsaArrivalHoldInterval': '500', 'lsaOriginateHoldInterval': '1000', 'lsaOriginateInterval': '2', 'lsaOriginateIntervalFlag': 'false', 'spfScheduleHoldInterval': '1000', 'routerId': '2.2.2.2', 'spfScheduleInterval': None, 'spfScheduleStartInterval': '500', 'spfScheduleIntervalType': 'intelligent-timer', 'lsaOriginateMaxInterval': '5000', 'lsaArrivalStartInterval': '500', 'spfScheduleIntervalMillisecond': None, 'lsaArrivalFlag': 'false', 'lsaOriginateStartInterval': '500', 'lsaArrivalInterval': None, 'lsaArrivalMaxInterval': '1000'}
existing
k/v pairs of existing configuration
verbose mode dict {'processId': '2', 'vrfName': '_public_', 'description': None, 'bandwidthReference': '100', 'spfScheduleMaxInterval': '10000', 'lsaArrivalHoldInterval': '500', 'lsaOriginateHoldInterval': '1000', 'lsaOriginateInterval': '2', 'lsaOriginateIntervalFlag': 'false', 'spfScheduleHoldInterval': '1000', 'routerId': '2.2.2.2', 'spfScheduleInterval': None, 'spfScheduleStartInterval': '500', 'spfScheduleIntervalType': 'intelligent-timer', 'lsaOriginateMaxInterval': '5000', 'lsaArrivalStartInterval': '500', 'spfScheduleIntervalMillisecond': None, 'lsaArrivalFlag': 'false', 'lsaOriginateStartInterval': '500', 'lsaArrivalInterval': None, 'lsaArrivalMaxInterval': '1000'}
proposed
k/v pairs of parameters passed into module
verbose mode dict {'description': None, 'lsaoholdinterval': '1000', 'lsaointerval': '2', 'bandwidth': '100', 'process_id': '2', 'vrf': '_public_', 'lsaaholdinterval': '500', 'lsaointervalflag': 'False', 'lsaomaxinterval': '5000', 'lsaalflag': 'False', 'lsaastartinterval': '500', 'lsaamaxinterval': '1000', 'lsaostartinterval': '500', 'spfintervaltype': 'intelligent-timer', 'lsaainterval': None, 'spfstartinterval': '500', 'route_id': '2.2.2.2', 'spfmaxinterval': '10000', 'spfholdinterval': '1000', 'spfinterval': None, 'spfintervalmi': None}
updates
commands sent to the device
always list ['ospf 2']

Status

This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.

For help in developing on modules, should you be so inclined, please read Community Information & Contributing, Testing Ansible and Developing Modules.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.4/ce_ospf_vrf_module.html