nxos_static_route - Manages static route configuration

New in version 2.2.

Synopsis

  • Manages static route configuration

Options

parameter required default choices comments
auth_pass
(added in 2.4.4)
no none
Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.
authorize
(added in 2.4.4)
no
  • yes
  • no
Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.
host
yes
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
next_hop
yes
Next hop address or interface of static route. If interface, it must be the fully-qualified interface name.
password
no
Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
port
no 0 (use common port)
Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).
pref
no
Preference or administrative difference of route (range 1-255).
prefix
yes
Destination prefix of static route.
provider
no
Convenience method that allows all nxos arguments to be passed as a dict object. All constraints (required, choices, etc) must be met either by individual arguments or values in this dict.
route_name
no
Name of the route. Used with the name parameter on the CLI.
ssh_keyfile
no
Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
state
yes
  • present
  • absent
Manage the state of the resource.
tag
no
Route tag value (numeric).
timeout
(added in 2.3)
no 10
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc).
transport
yes cli
Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi.
use_ssl
no
  • yes
  • no
Configures the transport to use SSL if set to true only when the transport=nxapi, otherwise this value is ignored.
username
no
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
validate_certs
no
  • yes
  • no
If no, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored.
vrf
no default
VRF for static route.

Examples

- nxos_static_route:
    prefix: "192.168.20.64/24"
    next_hop: "3.3.3.3"
    route_name: testing
    pref: 100

Return Values

Common return values are documented here Return Values, the following are the fields unique to this module:

name description returned type sample
commands
commands sent to the device
always list ['ip route 192.168.20.0/24 3.3.3.3 name testing 100']

Notes

Note

  • Tested against NXOSv 7.3.(0)D1(1) on VIRL
  • If no vrf is supplied, vrf is set to default.
  • If state=absent, the route will be removed, regardless of the non-required parameters.

Status

This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.

Maintenance Info

For more information about Red Hat’s this support of this module, please refer to this knowledge base article<https://access.redhat.com/articles/rhel-top-support-policies>

For help in developing on modules, should you be so inclined, please read Community Information & Contributing, Testing Ansible and Developing Modules.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.4/nxos_static_route_module.html