REPLACE

Syntax

REPLACE [LOW_PRIORITY | DELAYED]
 [INTO] tbl_name [PARTITION (partition_list)] [(col,...)]
 {VALUES | VALUE} ({expr | DEFAULT},...),(...),...
[RETURNING select_expr 
      [, select_expr ...]]

Or:

REPLACE [LOW_PRIORITY | DELAYED]
    [INTO] tbl_name [PARTITION (partition_list)]
    SET col={expr | DEFAULT}, ...
[RETURNING select_expr 
      [, select_expr ...]]

Or:

REPLACE [LOW_PRIORITY | DELAYED]
    [INTO] tbl_name [PARTITION (partition_list)] [(col,...)]
    SELECT ...
[RETURNING select_expr 
      [, select_expr ...]]

Description

REPLACE works exactly like INSERT, except that if an old row in the table has the same value as a new row for a PRIMARY KEY or a UNIQUE index, the old row is deleted before the new row is inserted. If the table has more than one UNIQUE keys, it is possible that the new row conflicts with more than one row. In this case, all conflicting rows will be deleted.

The table name can be specified in the form db_name.tbl_name or, if a default database is selected, in the form tbl_name (see Identifier Qualifiers). This allows to use REPLACE ... SELECT to copy rows between different databases.

MariaDB starting with 10.5.0

The RETURNING clause was introduced in MariaDB 10.5.0

Basically it works like this:

BEGIN;
SELECT 1 FROM t1 WHERE key=# FOR UPDATE;
IF found-row
  DELETE FROM t1 WHERE key=# ;
  INSERT INTO t1 VALUES (...);
ENDIF
END;

The above can be replaced with:

REPLACE INTO t1 VALUES (...)

REPLACE is a MariaDB/MySQL extension to the SQL standard. It either inserts, or deletes and inserts. For other MariaDB/MySQL extensions to standard SQL --- that also handle duplicate values --- see IGNORE and INSERT ON DUPLICATE KEY UPDATE.

Note that unless the table has a PRIMARY KEY or UNIQUE index, using a REPLACE statement makes no sense. It becomes equivalent to INSERT, because there is no index to be used to determine whether a new row duplicates another.

Values for all columns are taken from the values sSee Partition Pruning and Selection for details.pecified in the REPLACE statement. Any missing columns are set to their default values, just as happens for INSERT. You cannot refer to values from the current row and use them in the new row. If you use an assignment such as 'SET col = col + 1', the reference to the column name on the right hand side is treated as DEFAULT(col), so the assignment is equivalent to 'SET col = DEFAULT(col) + 1'.

To use REPLACE, you must have both the INSERT and DELETE privileges for the table.

There are some gotchas you should be aware of, before using REPLACE:

  • If there is an AUTO_INCREMENT field, a new value will be generated.
  • If there are foreign keys, ON DELETE action will be activated by REPLACE.
  • Triggers on DELETE and INSERT will be activated by REPLACE.

To avoid some of these behaviors, you can use INSERT ... ON DUPLICATE KEY UPDATE.

This statement activates INSERT and DELETE triggers. See Trigger Overview for details.

PARTITION

See Partition Pruning and Selection for details.

REPLACE RETURNING

REPLACE ... RETURNING returns a resultset of the replaced rows.

This returns the listed columns for all the rows that are replaced, or alternatively, the specified SELECT expression. Any SQL expressions which can be calculated can be used in the select expression for the RETURNING clause, including virtual columns and aliases, expressions which use various operators such as bitwise, logical and arithmetic operators, string functions, date-time functions, numeric functions, control flow functions, secondary functions and stored functions. Along with this, statements which have subqueries and prepared statements can also be used.

Examples

Simple REPLACE statement

REPLACE INTO t2 VALUES (1,'Leopard'),(2,'Dog') RETURNING id2, id2+id2 
as Total ,id2|id2, id2&&id2;
+-----+-------+---------+----------+
| id2 | Total | id2|id2 | id2&&id2 |
+-----+-------+---------+----------+
|   1 |     2 |       1 |        1 |
|   2 |     4 |       2 |        1 |
+-----+-------+---------+----------+

Using stored functions in RETURNING

DELIMITER |
CREATE FUNCTION f(arg INT) RETURNS INT
    BEGIN
      RETURN (SELECT arg+arg);
    END|

DELIMITER ;
PREPARE stmt FROM "REPLACE INTO t2 SET id2=3, animal2='Fox' RETURNING f2(id2),
UPPER(animal2)";

EXECUTE stmt;
+---------+----------------+
| f2(id2) | UPPER(animal2) |
+---------+----------------+
|       6 | FOX            |
+---------+----------------+

Subqueries in the statement

REPLACE INTO t1 SELECT * FROM t2 RETURNING (SELECT id2 FROM t2 WHERE 
id2 IN (SELECT id2 FROM t2 WHERE id2=1)) AS new_id;
+--------+
| new_id |
+--------+
|      1 |
|      1 |
|      1 |
|      1 |
+--------+

Subqueries in the RETURNING clause that return more than one row or column cannot be used..

Aggregate functions cannot be used in the RETURNING clause. Since aggregate functions work on a set of values and if the purpose is to get the row count, ROW_COUNT() with SELECT can be used, or it can be used in REPLACE...SEL== Description

REPLACE ... RETURNING returns a resultset of the replaced rows.

This returns the listed columns for all the rows that are replaced, or alternatively, the specified SELECT expression. Any SQL expressions which can be calculated can be used in the select expression for the RETURNING clause, including virtual columns and aliases, expressions which use various operators such as bitwise, logical and arithmetic operators, string functions, date-time functions, numeric functions, control flow functions, secondary functions and stored functions. Along with this, statements which have subqueries and prepared statements can also be used.

Examples

Simple REPLACE statement

REPLACE INTO t2 VALUES (1,'Leopard'),(2,'Dog') RETURNING id2, id2+id2 
as Total ,id2|id2, id2&&id2;
+-----+-------+---------+----------+
| id2 | Total | id2|id2 | id2&&id2 |
+-----+-------+---------+----------+
|   1 |     2 |       1 |        1 |
|   2 |     4 |       2 |        1 |
+-----+-------+---------+----------+

Using stored functions in RETURNING

DELIMITER |
CREATE FUNCTION f(arg INT) RETURNS INT
    BEGIN
      RETURN (SELECT arg+arg);
    END|

DELIMITER ;
PREPARE stmt FROM "REPLACE INTO t2 SET id2=3, animal2='Fox' RETURNING f2(id2),
UPPER(animal2)";

EXECUTE stmt;
+---------+----------------+
| f2(id2) | UPPER(animal2) |
+---------+----------------+
|       6 | FOX            |
+---------+----------------+

Subqueries in the statement

REPLACE INTO t1 SELECT * FROM t2 RETURNING (SELECT id2 FROM t2 WHERE 
id2 IN (SELECT id2 FROM t2 WHERE id2=1)) AS new_id;
+--------+
| new_id |
+--------+
|      1 |
|      1 |
|      1 |
|      1 |
+--------+

Subqueries in the RETURNING clause that return more than one row or column cannot be used..

Aggregate functions cannot be used in the RETURNING clause. Since aggregate functions work on a set of values and if the purpose is to get the row count, ROW_COUNT() with SELECT can be used, or it can be used in REPLACE...SELECT...RETURNING if the table in the RETURNING clause is not the same as the REPLACE table. ECT...RETURNING if the table in the RETURNING clause is not the same as the REPLACE table.

See Also

Content reproduced on this site is the property of its respective owners, and this content is not reviewed in advance by MariaDB. The views, information and opinions expressed by this content do not necessarily represent those of MariaDB or any other party.

© 2021 MariaDB
Licensed under the Creative Commons Attribution 3.0 Unported License and the GNU Free Documentation License.
https://mariadb.com/kb/en/replace/