aci_static_binding_to_epg - Bind static paths to EPGs (fv:RsPathAtt)

New in version 2.5.

Synopsis

  • Bind static paths to EPGs on Cisco ACI fabrics.

Parameters

Parameter Choices/Defaults Comments
ap
Name of an existing application network profile, that will contain the EPGs.

aliases: app_profile, app_profile_name
certificate_name
The X.509 certificate name attached to the APIC AAA user used for signature-based authentication.
It defaults to the private_key basename, without extension.

aliases: cert_name
deploy_immediacy
    Choices:
  • immediate
  • lazy
The Deployement Immediacy of Static EPG on PC, VPC or Interface.
The APIC defaults to lazy when unset during creation.
encap_id
    Choices:
  • Valid encap IDs for specified encap
  • currently 1 to 4096
The encapsulation ID associating the epg with the interface path.
This acts as the secondary encap_id when using micro-segmentation.

aliases: vlan, vlan_id
epg
The name of the end point group.

aliases: epg_name
extpaths
The extpaths integer value part of the tDn.
extpaths is only used if interface_type is fex.
Usually something like '1011'.
host
required
IP Address or hostname of APIC resolvable by Ansible control host.

aliases: hostname
interface
The interface string value part of the tDn.
Usually a policy group like "test-IntPolGrp" or an interface of the following format "1/7" depending on interface_type.
interface_mode
    Choices:
  • 802.1p
  • access
  • native
  • regular
  • tagged
  • trunk
  • untagged
Determines how layer 2 tags will be read from and added to frames.
Values 802.1p and native are identical.
Values access and untagged are identical.
Values regular, tagged and trunk are identical.
The APIC defaults to trunk when unset during creation.

aliases: interface_mode_name, mode
interface_type
    Choices:
  • fex
  • port_channel
  • switch_port ←
  • vpc
The type of interface for the static EPG deployement.
leafs
The switch ID(s) that the interface belongs to.
When interface_type is switch_port, port_channel, or fex, then leafs is a string of the leaf ID.
When interface_type is vpc, then leafs is a list with both leaf IDs.
The leafs value is usually something like '101' or '101-102' depending on connection_type.

aliases: leaves, nodes, paths, switches
output_level
    Choices:
  • debug
  • info
  • normal ←
Influence the output of this ACI module.
normal means the standard output, incl. current dict
info adds informational output, incl. previous, proposed and sent dicts
debug adds debugging output, incl. filter_string, method, response, status and url information
password
required
The password to use for authentication.
This option is mutual exclusive with private_key. If private_key is provided too, it will be used instead.
pod_id
The pod number part of the tDn.
pod_id is usually an integer below 10.

aliases: pod, pod_number
port
Port number to be used for REST connection.
The default value depends on parameter `use_ssl`.
primary_encap_id
    Choices:
  • Valid encap IDs for specified encap
  • currently 1 to 4096
Determines the primary encapsulation ID associating the epg with the interface path when using micro-segmentation.

aliases: primary_vlan, primary_vlan_id
private_key
required
PEM formatted file that contains your private key to be used for signature-based authentication.
The name of the key (without extension) is used as the certificate name in ACI, unless certificate_name is specified.
This option is mutual exclusive with password. If password is provided too, it will be ignored.

aliases: cert_key
state
    Choices:
  • absent
  • present ←
  • query
Use present or absent for adding or removing.
Use query for listing an object or multiple objects.
tenant
Name of an existing tenant.

aliases: tenant_name
timeout
int
 Default:
30
The socket level timeout in seconds.
use_proxy
bool
    Choices:
  • no
  • yes ←
If no, it will not use a proxy, even if one is defined in an environment variable on the target hosts.
use_ssl
bool
    Choices:
  • no
  • yes ←
If no, an HTTP connection will be used instead of the default HTTPS connection.
username Default:
"admin"
The username to use for authentication.

aliases: user
validate_certs
bool
    Choices:
  • no
  • yes ←
If no, SSL certificates will not be validated.
This should only set to no when used on personally controlled sites using self-signed certificates.

Notes

Note

Examples

- name: Deploy Static Path binding for given EPG
  aci_static_binding_to_epg:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: accessport-code-cert
    ap: accessport_code_app
    epg: accessport_epg1
    encap_id: 222
    deploy_immediacy: lazy
    interface_mode: untagged
    interface_type: switch_port
    pod_id: 1
    leafs: 101
    interface: '1/7'
    state: present

- name: Remove Static Path binding for given EPG
  aci_static_binding_to_epg:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: accessport-code-cert
    ap: accessport_code_app
    epg: accessport_epg1
    interface_type: switch_port
    pod: 1
    leafs: 101
    interface: '1/7'
    state: absent

- name: Get specific Static Path binding for given EPG
  aci_static_binding_to_epg:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: accessport-code-cert
    ap: accessport_code_app
    epg: accessport_epg1
    interface_type: switch_port
    pod: 1
    leafs: 101
    interface: '1/7'
    state: query

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
current
list
 success
The existing configuration from the APIC after the module has finished

Sample:
[{'fvTenant': {'attributes': {'descr': 'Production environment', 'dn': 'uni/tn-production', 'name': 'production', 'nameAlias': '', 'ownerKey': '', 'ownerTag': ''}}}]
error
dict
 failure
The error information as returned from the APIC

Sample:
{'code': '122', 'text': 'unknown managed object class foo'}
filter_string
string
 failure or debug
The filter string used for the request

Sample:
?rsp-prop-include=config-only
method
string
 failure or debug
The HTTP method used for the request to the APIC

Sample:
POST
previous
list
 info
The original configuration from the APIC before the module has started

Sample:
[{'fvTenant': {'attributes': {'descr': 'Production', 'dn': 'uni/tn-production', 'name': 'production', 'nameAlias': '', 'ownerKey': '', 'ownerTag': ''}}}]
proposed
dict
 info
The assembled configuration from the user-provided parameters

Sample:
{'fvTenant': {'attributes': {'descr': 'Production environment', 'name': 'production'}}}
raw
string
 parse error
The raw output returned by the APIC REST API (xml or json)

Sample:
<?xml version="1.0" encoding="UTF-8"?><imdata totalCount="1"><error code="122" text="unknown managed object class foo"/></imdata>
response
string
 failure or debug
The HTTP response from the APIC

Sample:
OK (30 bytes)
sent
list
 info
The actual/minimal configuration pushed to the APIC

Sample:
{'fvTenant': {'attributes': {'descr': 'Production environment'}}}
status
int
 failure or debug
The HTTP status from the APIC

Sample:
200
url
string
 failure or debug
The HTTP url used for the request to the APIC

Sample:
https://10.11.12.13/api/mo/uni/tn-production.json


Status

This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.

Maintenance

This module is flagged as community which means that it is maintained by the Ansible Community. See Module Maintenance & Support for more info.

For a list of other modules that are also maintained by the Ansible Community, see here.

Author

  • Bruno Calogero (@brunocalogero)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.6/modules/aci_static_binding_to_epg_module.html