junos_vlan - Manage VLANs on Juniper JUNOS network devices

New in version 2.4.

Synopsis

  • This module provides declarative management of VLANs on Juniper JUNOS network devices.

Requirements

The below requirements are needed on the host that executes this module.

  • ncclient (>=v0.5.2)

Parameters

Parameter Choices/Defaults Comments
active
bool
    Choices:
  • no
  • yes
Specifies whether or not the configuration is active or deactivated
aggregate
List of VLANs definitions.
description
Text description of VLANs.
interfaces
List of interfaces to check the VLAN has been configured correctly.
name
required
Name of the VLAN.
provider
Deprecated
Starting with Ansible 2.5 we recommend using connection: network_cli or connection: netconf.
For more information please see the Junos OS Platform Options guide.
A dict object containing connection details.
host
required
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
port Default:
22
Specifies the port to use when building the connection to the remote device. The port value will default to the well known SSH port of 22 (for transport=cli) or port 830 (for transport=netconf) device.
username
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
password
Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
timeout Default:
10
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
ssh_keyfile
Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
state
    Choices:
  • present
  • absent
State of the VLAN configuration.
vlan_id
required
ID of the VLAN. Range 1-4094.

Notes

Note

  • This module requires the netconf system service be enabled on the remote device being managed.
  • Tested against vSRX JUNOS version 15.1X49-D15.4, vqfx-10000 JUNOS Version 15.1X53-D60.4.
  • Recommended connection is netconf. See the Junos OS Platform Options.
  • This module also works with local connections for legacy playbooks.
  • For information on using CLI and netconf see the Junos OS Platform Options guide
  • For more information on using Ansible to manage network devices see the Ansible Network Guide
  • For more information on using Ansible to manage Juniper network devices see https://www.ansible.com/ansible-juniper.

Examples

- name: configure VLAN ID and name
  junos_vlan:
    vlan_name: test
    vlan_id: 20
    name: test-vlan

- name: remove VLAN configuration
  junos_vlan:
    vlan_name: test
    state: absent

- name: deactive VLAN configuration
  junos_vlan:
    vlan_name: test
    state: present
    active: False

- name: activate VLAN configuration
  junos_vlan:
    vlan_name: test
    state: present
    active: True

- name: Create vlan configuration using aggregate
  junos_vlan:
    aggregate:
      - { vlan_id: 159, name: test_vlan_1, description: test vlan-1 }
      - { vlan_id: 160, name: test_vlan_2, description: test vlan-2 }

- name: Delete vlan configuration using aggregate
  junos_vlan:
    aggregate:
      - { vlan_id: 159, name: test_vlan_1 }
      - { vlan_id: 160, name: test_vlan_2 }
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
diff.prepared
string
when configuration is changed and diff option is enabled.
Configuration difference before and after applying change.

Sample:
[edit vlans] + test-vlan-1 { + vlan-id 60; + }


Status

This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.

Maintenance

This module is flagged as network which means that it is maintained by the Ansible Network Team. See Module Maintenance & Support for more info.

For a list of other modules that are also maintained by the Ansible Network Team, see here.

Support

For more information about Red Hat’s support of this module, please refer to this Knowledge Base article

Author

  • Ganesh Nalawade (@ganeshrn)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.6/modules/junos_vlan_module.html