module Kernel

RubyGems adds the gem method to allow activation of specific gem versions and overrides the require method on Kernel to make gems appear as if they live on the $LOAD_PATH. See the documentation of these methods for further detail.

The Kernel module is included by class Object, so its methods are available in every Ruby object.

The Kernel instance methods are documented in class Object while the module methods are documented here. These methods are called without a receiver and thus can be called in functional form:

sprintf "%.1f", 1.234 #=> "1.2"

Public Class Methods

URI(uri) Show source
# File lib/uri/common.rb, line 709
def URI(uri)
  if uri.is_a?(URI::Generic)
    uri
  elsif uri = String.try_convert(uri)
    URI.parse(uri)
  else
    raise ArgumentError,
      "bad argument (expected URI object or URI string)"
  end
end

Returns uri converted to a URI object.

open(path [, mode [, perm]] [, opt]) → io or nil Show source
open(path [, mode [, perm]] [, opt]) {|io| block } → obj
static VALUE
rb_f_open(int argc, VALUE *argv)
{
    ID to_open = 0;
    int redirect = FALSE;

    if (argc >= 1) {
        CONST_ID(to_open, "to_open");
        if (rb_respond_to(argv[0], to_open)) {
            redirect = TRUE;
        }
        else {
            VALUE tmp = argv[0];
            FilePathValue(tmp);
            if (NIL_P(tmp)) {
                redirect = TRUE;
            }
            else {
                VALUE cmd = check_pipe_command(tmp);
                if (!NIL_P(cmd)) {
                    argv[0] = cmd;
                    return rb_io_s_popen(argc, argv, rb_cIO);
                }
            }
        }
    }
    if (redirect) {
        VALUE io = rb_funcall2(argv[0], to_open, argc-1, argv+1);

        if (rb_block_given_p()) {
            return rb_ensure(rb_yield, io, io_close, io);
        }
        return io;
    }
    return rb_io_s_open(argc, argv, rb_cFile);
}

Creates an IO object connected to the given stream, file, or subprocess.

If path does not start with a pipe character (|), treat it as the name of a file to open using the specified mode (defaulting to “r”).

The mode is either a string or an integer. If it is an integer, it must be bitwise-or of open(2) flags, such as File::RDWR or File::EXCL. If it is a string, it is either “fmode”, “fmode:ext_enc”, or “fmode:ext_enc:int_enc”.

See the documentation of IO.new for full documentation of the mode string directives.

If a file is being created, its initial permissions may be set using the perm parameter. See File.new and the open(2) and chmod(2) man pages for a description of permissions.

If a block is specified, it will be invoked with the IO object as a parameter, and the IO will be automatically closed when the block terminates. The call returns the value of the block.

If path starts with a pipe character ("|"), a subprocess is created, connected to the caller by a pair of pipes. The returned IO object may be used to write to the standard input and read from the standard output of this subprocess.

If the command following the pipe is a single minus sign ("|-"), Ruby forks, and this subprocess is connected to the parent. If the command is not "-", the subprocess runs the command.

When the subprocess is Ruby (opened via "|-"), the open call returns nil. If a block is associated with the open call, that block will run twice — once in the parent and once in the child.

The block parameter will be an IO object in the parent and nil in the child. The parent's IO object will be connected to the child's $stdin and $stdout. The subprocess will be terminated at the end of the block.

Examples

Reading from “testfile”:

open("testfile") do |f|
  print f.gets
end

Produces:

This is line one

Open a subprocess and read its output:

cmd = open("|date")
print cmd.gets
cmd.close

Produces:

Wed Apr  9 08:56:31 CDT 2003

Open a subprocess running the same Ruby program:

f = open("|-", "w+")
if f.nil?
  puts "in Child"
  exit
else
  puts "Got: #{f.gets}"
end

Produces:

Got: in Child

Open a subprocess using a block to receive the IO object:

open "|-" do |f|
  if f then
    # parent process
    puts "Got: #{f.gets}"
  else
    # child process
    puts "in Child"
  end
end

Produces:

Got: in Child

Private Class Methods

open_uri_original_open(*args)
Alias for: open

Public Instance Methods

Array(arg) → array Show source
static VALUE
rb_f_array(VALUE obj, VALUE arg)
{
    return rb_Array(arg);
}

Returns arg as an Array.

First tries to call to_ary on arg, then to_a.

Array(1..5)   #=> [1, 2, 3, 4, 5]
BigDecimal(*args) Show source
static VALUE
BigDecimal_global_new(int argc, VALUE *argv, VALUE self)
{
    ENTER(1);
    Real *pv;

    GUARD_OBJ(pv, BigDecimal_new(argc, argv));
    if (ToValue(pv)) pv = VpCopy(NULL, pv);
    pv->obj = TypedData_Wrap_Struct(rb_cBigDecimal, &BigDecimal_data_type, pv);
    return pv->obj;
}

See also BigDecimal.new

Complex(x[, y]) → numeric Show source
static VALUE
nucomp_f_complex(int argc, VALUE *argv, VALUE klass)
{
    return rb_funcall2(rb_cComplex, id_convert, argc, argv);
}

Returns x+i*y;

Complex(1, 2)    #=> (1+2i)
Complex('1+2i')  #=> (1+2i)
Complex(nil)     #=> TypeError
Complex(1, nil)  #=> TypeError

Syntax of string form:

string form = extra spaces , complex , extra spaces ;
complex = real part | [ sign ] , imaginary part
        | real part , sign , imaginary part
        | rational , "@" , rational ;
real part = rational ;
imaginary part = imaginary unit | unsigned rational , imaginary unit ;
rational = [ sign ] , unsigned rational ;
unsigned rational = numerator | numerator , "/" , denominator ;
numerator = integer part | fractional part | integer part , fractional part ;
denominator = digits ;
integer part = digits ;
fractional part = "." , digits , [ ( "e" | "E" ) , [ sign ] , digits ] ;
imaginary unit = "i" | "I" | "j" | "J" ;
sign = "-" | "+" ;
digits = digit , { digit | "_" , digit };
digit = "0" | "1" | "2" | "3" | "4" | "5" | "6" | "7" | "8" | "9" ;
extra spaces = ? \s* ? ;

See String#to_c.

Float(arg) → float Show source
static VALUE
rb_f_float(VALUE obj, VALUE arg)
{
    return rb_Float(arg);
}

Returns arg converted to a float. Numeric types are converted directly, and with exception to string and nil the rest are converted using arg.to_f. Converting a string with invalid characters will result in a ArgumentError. Converting nil generates a TypeError.

Float(1)                 #=> 1.0
Float("123.456")         #=> 123.456
Float("123.0_badstring") #=> ArgumentError: invalid value for Float(): "123.0_badstring"
Float(nil)               #=> TypeError: can't convert nil into Float
Hash(arg) → hash Show source
static VALUE
rb_f_hash(VALUE obj, VALUE arg)
{
    return rb_Hash(arg);
}

Converts arg to a Hash by calling arg.to_hash. Returns an empty Hash when arg is nil or [].

Hash([])          #=> {}
Hash(nil)         #=> {}
Hash(key: :value) #=> {:key => :value}
Hash([1, 2, 3])   #=> TypeError
Integer(arg, base=0) → integer Show source
static VALUE
rb_f_integer(int argc, VALUE *argv, VALUE obj)
{
    VALUE arg = Qnil;
    int base = 0;

    switch (argc) {
      case 2:
        base = NUM2INT(argv[1]);
      case 1:
        arg = argv[0];
        break;
      default:
        /* should cause ArgumentError */
        rb_scan_args(argc, argv, "11", NULL, NULL);
    }
    return rb_convert_to_integer(arg, base);
}

Converts arg to a Fixnum or Bignum. Numeric types are converted directly (with floating point numbers being truncated). base (0, or between 2 and 36) is a base for integer string representation. If arg is a String, when base is omitted or equals zero, radix indicators (0, 0b, and 0x) are honored. In any case, strings should be strictly conformed to numeric representation. This behavior is different from that of String#to_i. Non string values will be converted by first trying to_int, then to_i. Passing nil raises a TypeError.

Integer(123.999)    #=> 123
Integer("0x1a")     #=> 26
Integer(Time.new)   #=> 1204973019
Integer("0930", 10) #=> 930
Integer("111", 2)   #=> 7
Integer(nil)        #=> TypeError
Pathname(path) → pathname Show source
static VALUE
path_f_pathname(VALUE self, VALUE str)
{
    return rb_class_new_instance(1, &str, rb_cPathname);
}

Creates a new Pathname object from the given string, path, and returns pathname object.

In order to use this constructor, you must first require the Pathname standard library extension.

require 'pathname'
Pathname("/home/zzak")
#=> #<Pathname:/home/zzak>

See also Pathname.new for more information.

Rational(x[, y]) → numeric Show source
static VALUE
nurat_f_rational(int argc, VALUE *argv, VALUE klass)
{
    return rb_funcall2(rb_cRational, id_convert, argc, argv);
}

Returns x/y;

Rational(1, 2)   #=> (1/2)
Rational('1/2')  #=> (1/2)
Rational(nil)    #=> TypeError
Rational(1, nil) #=> TypeError

Syntax of string form:

string form = extra spaces , rational , extra spaces ;
rational = [ sign ] , unsigned rational ;
unsigned rational = numerator | numerator , "/" , denominator ;
numerator = integer part | fractional part | integer part , fractional part ;
denominator = digits ;
integer part = digits ;
fractional part = "." , digits , [ ( "e" | "E" ) , [ sign ] , digits ] ;
sign = "-" | "+" ;
digits = digit , { digit | "_" , digit } ;
digit = "0" | "1" | "2" | "3" | "4" | "5" | "6" | "7" | "8" | "9" ;
extra spaces = ? \s* ? ;

See String#to_r.

String(arg) → string Show source
static VALUE
rb_f_string(VALUE obj, VALUE arg)
{
    return rb_String(arg);
}

Returns arg as a String.

First tries to call its to_str method, then its to_s method.

String(self)        #=> "main"
String(self.class)  #=> "Object"
String(123456)      #=> "123456"
__callee__ → symbol Show source
static VALUE
rb_f_callee_name(void)
{
    ID fname = prev_frame_callee(); /* need *callee* ID */

    if (fname) {
        return ID2SYM(fname);
    }
    else {
        return Qnil;
    }
}

Returns the called name of the current method as a Symbol. If called outside of a method, it returns nil.

__dir__ → string Show source
static VALUE
f_current_dirname(void)
{
    VALUE base = rb_current_realfilepath();
    if (NIL_P(base)) {
        return Qnil;
    }
    base = rb_file_dirname(base);
    return base;
}

Returns the canonicalized absolute path of the directory of the file from which this method is called. It means symlinks in the path is resolved. If __FILE__ is nil, it returns nil. The return value equals to File.dirname(File.realpath(__FILE__)).

__method__ → symbol Show source
static VALUE
rb_f_method_name(void)
{
    ID fname = prev_frame_func(); /* need *method* ID */

    if (fname) {
        return ID2SYM(fname);
    }
    else {
        return Qnil;
    }
}

Returns the name at the definition of the current method as a Symbol. If called outside of a method, it returns nil.

`cmd` → string Show source
static VALUE
rb_f_backquote(VALUE obj, VALUE str)
{
    VALUE port;
    VALUE result;
    rb_io_t *fptr;

    SafeStringValue(str);
    rb_last_status_clear();
    port = pipe_open_s(str, "r", FMODE_READABLE|DEFAULT_TEXTMODE, NULL);
    if (NIL_P(port)) return rb_str_new(0,0);

    GetOpenFile(port, fptr);
    result = read_all(fptr, remain_size(fptr), Qnil);
    rb_io_close(port);
    rb_io_fptr_finalize(fptr);
    rb_gc_force_recycle(port); /* also guards from premature GC */

    return result;
}

Returns the standard output of running cmd in a subshell. The built-in syntax %x{...} uses this method. Sets $? to the process status.

%x`date`                   #=> "Wed Apr  9 08:56:30 CDT 2003\n"
%x`ls testdir`.split[1]    #=> "main.rb"
%x`echo oops && exit 99`   #=> "oops\n"
$?.exitstatus            #=> 99
abort Show source
Kernel::abort([msg])
Process::abort([msg])
VALUE
rb_f_abort(int argc, const VALUE *argv)
{
    rb_check_arity(argc, 0, 1);
    if (argc == 0) {
        if (!NIL_P(GET_THREAD()->errinfo)) {
            ruby_error_print();
        }
        rb_exit(EXIT_FAILURE);
    }
    else {
        VALUE args[2];

        args[1] = args[0] = argv[0];
        StringValue(args[0]);
        rb_io_puts(1, args, rb_stderr);
        args[0] = INT2NUM(EXIT_FAILURE);
        rb_exc_raise(rb_class_new_instance(2, args, rb_eSystemExit));
    }

    UNREACHABLE;
}

Terminate execution immediately, effectively by calling Kernel.exit(false). If msg is given, it is written to STDERR prior to terminating.

at_exit { block } → proc Show source
static VALUE
rb_f_at_exit(void)
{
    VALUE proc;

    if (!rb_block_given_p()) {
        rb_raise(rb_eArgError, "called without a block");
    }
    proc = rb_block_proc();
    rb_set_end_proc(rb_call_end_proc, proc);
    return proc;
}

Converts block to a Proc object (and therefore binds it at the point of call) and registers it for execution when the program exits. If multiple handlers are registered, they are executed in reverse order of registration.

def do_at_exit(str1)
  at_exit { print str1 }
end
at_exit { puts "cruel world" }
do_at_exit("goodbye ")
exit

produces:

goodbye cruel world
autoload(module, filename) → nil Show source
static VALUE
rb_f_autoload(VALUE obj, VALUE sym, VALUE file)
{
    VALUE klass = rb_class_real(rb_vm_cbase());
    if (NIL_P(klass)) {
        rb_raise(rb_eTypeError, "Can not set autoload on singleton class");
    }
    return rb_mod_autoload(klass, sym, file);
}

Registers filename to be loaded (using Kernel::require) the first time that module (which may be a String or a symbol) is accessed.

autoload(:MyModule, "/usr/local/lib/modules/my_module.rb")
autoload?(name) → String or nil Show source
static VALUE
rb_f_autoload_p(VALUE obj, VALUE sym)
{
    /* use rb_vm_cbase() as same as rb_f_autoload. */
    VALUE klass = rb_vm_cbase();
    if (NIL_P(klass)) {
        return Qnil;
    }
    return rb_mod_autoload_p(klass, sym);
}

Returns filename to be loaded if name is registered as autoload.

autoload(:B, "b")
autoload?(:B)            #=> "b"
binding → a_binding Show source
static VALUE
rb_f_binding(VALUE self)
{
    return rb_binding_new();
}

Returns a Binding object, describing the variable and method bindings at the point of call. This object can be used when calling eval to execute the evaluated command in this environment. See also the description of class Binding.

def get_binding(param)
  binding
end
b = get_binding("hello")
eval("param", b)   #=> "hello"
block_given? → true or false Show source
VALUE
rb_f_block_given_p(void)
{
    rb_thread_t *th = GET_THREAD();
    rb_control_frame_t *cfp = th->cfp;
    cfp = vm_get_ruby_level_caller_cfp(th, RUBY_VM_PREVIOUS_CONTROL_FRAME(cfp));

    if (cfp != 0 && VM_CF_BLOCK_PTR(cfp)) {
        return Qtrue;
    }
    else {
        return Qfalse;
    }
}

Returns true if yield would execute a block in the current context. The iterator? form is mildly deprecated.

def try
  if block_given?
    yield
  else
    "no block"
  end
end
try                  #=> "no block"
try { "hello" }      #=> "hello"
try do "hello" end   #=> "hello"
callcc {|cont| block } → obj Show source
static VALUE
rb_callcc(VALUE self)
{
    volatile int called;
    volatile VALUE val = cont_capture(&called);

    if (called) {
        return val;
    }
    else {
        return rb_yield(val);
    }
}

Generates a Continuation object, which it passes to the associated block. You need to require 'continuation' before using this method. Performing a cont.call will cause the callcc to return (as will falling through the end of the block). The value returned by the callcc is the value of the block, or the value passed to cont.call. See class Continuation for more details. Also see #throw for an alternative mechanism for unwinding a call stack.

caller(start=1, length=nil) → array or nil Show source
caller(range) → array or nil
static VALUE
rb_f_caller(int argc, VALUE *argv)
{
    return vm_backtrace_to_ary(GET_THREAD(), argc, argv, 1, 1, 1);
}

Returns the current execution stack—an array containing strings in the form file:line or file:line: in `method'.

The optional start parameter determines the number of initial stack entries to omit from the top of the stack.

A second optional length parameter can be used to limit how many entries are returned from the stack.

Returns nil if start is greater than the size of current execution stack.

Optionally you can pass a range, which will return an array containing the entries within the specified range.

def a(skip)
  caller(skip)
end
def b(skip)
  a(skip)
end
def c(skip)
  b(skip)
end
c(0)   #=> ["prog:2:in `a'", "prog:5:in `b'", "prog:8:in `c'", "prog:10:in `<main>'"]
c(1)   #=> ["prog:5:in `b'", "prog:8:in `c'", "prog:11:in `<main>'"]
c(2)   #=> ["prog:8:in `c'", "prog:12:in `<main>'"]
c(3)   #=> ["prog:13:in `<main>'"]
c(4)   #=> []
c(5)   #=> nil
caller_locations(start=1, length=nil) → array or nil Show source
caller_locations(range) → array or nil
static VALUE
rb_f_caller_locations(int argc, VALUE *argv)
{
    return vm_backtrace_to_ary(GET_THREAD(), argc, argv, 1, 1, 0);
}

Returns the current execution stack—an array containing backtrace location objects.

See Thread::Backtrace::Location for more information.

The optional start parameter determines the number of initial stack entries to omit from the top of the stack.

A second optional length parameter can be used to limit how many entries are returned from the stack.

Returns nil if start is greater than the size of current execution stack.

Optionally you can pass a range, which will return an array containing the entries within the specified range.

catch([tag]) {|tag| block } → obj Show source
static VALUE
rb_f_catch(int argc, VALUE *argv)
{
    VALUE tag;

    if (argc == 0) {
        tag = rb_obj_alloc(rb_cObject);
    }
    else {
        rb_scan_args(argc, argv, "01", &tag);
    }
    return rb_catch_obj(tag, catch_i, 0);
}

catch executes its block. If throw is not called, the block executes normally, and catch returns the value of the last expression evaluated.

catch(1) { 123 }            # => 123

If throw(tag2, val) is called, Ruby searches up its stack for a catch block whose tag has the same object_id as tag2. When found, the block stops executing and returns val (or nil if no second argument was given to throw).

catch(1) { throw(1, 456) }  # => 456
catch(1) { throw(1) }       # => nil

When tag is passed as the first argument, catch yields it as the parameter of the block.

catch(1) {|x| x + 2 }       # => 3

When no tag is given, catch yields a new unique object (as from Object.new) as the block parameter. This object can then be used as the argument to throw, and will match the correct catch block.

catch do |obj_A|
  catch do |obj_B|
    throw(obj_B, 123)
    puts "This puts is not reached"
  end

  puts "This puts is displayed"
  456
end

# => 456

catch do |obj_A|
  catch do |obj_B|
    throw(obj_A, 123)
    puts "This puts is still not reached"
  end

  puts "Now this puts is also not reached"
  456
end

# => 123
chomp → $_ Show source
chomp(string) → $_
static VALUE
rb_f_chomp(int argc, VALUE *argv)
{
    VALUE str = rb_funcall_passing_block(uscore_get(), rb_intern("chomp"), argc, argv);
    rb_lastline_set(str);
    return str;
}

Equivalent to $_ = $_.chomp(string). See String#chomp. Available only when -p/-n command line option specified.

chop → $_ Show source
static VALUE
rb_f_chop(void)
{
    VALUE str = rb_funcall_passing_block(uscore_get(), rb_intern("chop"), 0, 0);
    rb_lastline_set(str);
    return str;
}

Equivalent to ($_.dup).chop!, except nil is never returned. See String#chop!. Available only when -p/-n command line option specified.

eval(string [, binding [, filename [,lineno]]]) → obj Show source
VALUE
rb_f_eval(int argc, const VALUE *argv, VALUE self)
{
    VALUE src, scope, vfile, vline;
    VALUE file = Qundef;
    int line = 1;

    rb_scan_args(argc, argv, "13", &src, &scope, &vfile, &vline);
    SafeStringValue(src);
    if (argc >= 3) {
        StringValue(vfile);
    }
    if (argc >= 4) {
        line = NUM2INT(vline);
    }

    if (!NIL_P(vfile))
        file = vfile;
    return eval_string(self, src, scope, file, line);
}

Evaluates the Ruby expression(s) in string. If binding is given, which must be a Binding object, the evaluation is performed in its context. If the optional filename and lineno parameters are present, they will be used when reporting syntax errors.

def get_binding(str)
  return binding
end
str = "hello"
eval "str + ' Fred'"                      #=> "hello Fred"
eval "str + ' Fred'", get_binding("bye")  #=> "bye Fred"
exec([env,] command... [,options]) Show source
VALUE
rb_f_exec(int argc, const VALUE *argv)
{
    VALUE execarg_obj, fail_str;
    struct rb_execarg *eargp;
#define CHILD_ERRMSG_BUFLEN 80
    char errmsg[CHILD_ERRMSG_BUFLEN] = { '\0' };

    execarg_obj = rb_execarg_new(argc, argv, TRUE);
    eargp = rb_execarg_get(execarg_obj);
    rb_execarg_fixup(execarg_obj);
    fail_str = eargp->use_shell ? eargp->invoke.sh.shell_script : eargp->invoke.cmd.command_name;

#if defined(__APPLE__) || defined(__HAIKU__)
    rb_exec_without_timer_thread(eargp, errmsg, sizeof(errmsg));
#else
    before_exec_async_signal_safe(); /* async-signal-safe */
    rb_exec_async_signal_safe(eargp, errmsg, sizeof(errmsg));
    preserving_errno(after_exec_async_signal_safe()); /* async-signal-safe */
#endif
    RB_GC_GUARD(execarg_obj);
    if (errmsg[0])
        rb_sys_fail(errmsg);
    rb_sys_fail_str(fail_str);
    return Qnil;                /* dummy */
}

Replaces the current process by running the given external command, which can take one of the following forms:

exec(commandline)

command line string which is passed to the standard shell

exec(cmdname, arg1, ...)

command name and one or more arguments (no shell)

exec([cmdname, argv0], arg1, ...)

command name, argv and zero or more arguments (no shell)

In the first form, the string is taken as a command line that is subject to shell expansion before being executed.

The standard shell always means "/bin/sh" on Unix-like systems, same as ENV["RUBYSHELL"] (or ENV["COMSPEC"] on Windows NT series), and similar.

If the string from the first form (exec("command")) follows these simple rules:

  • no meta characters

  • no shell reserved word and no special built-in

  • Ruby invokes the command directly without shell

You can force shell invocation by adding “;” to the string (because “;” is a meta character).

Note that this behavior is observable by pid obtained (return value of spawn() and IO#pid for IO.popen) is the pid of the invoked command, not shell.

In the second form (exec("command1", "arg1", ...)), the first is taken as a command name and the rest are passed as parameters to command with no shell expansion.

In the third form (exec(["command", "argv0"], "arg1", ...)), starting a two-element array at the beginning of the command, the first element is the command to be executed, and the second argument is used as the argv[0] value, which may show up in process listings.

In order to execute the command, one of the exec(2) system calls are used, so the running command may inherit some of the environment of the original program (including open file descriptors).

This behavior is modified by the given env and options parameters. See ::spawn for details.

If the command fails to execute (typically Errno::ENOENT when it was not found) a SystemCallError exception is raised.

This method modifies process attributes according to given options before exec(2) system call. See ::spawn for more details about the given options.

The modified attributes may be retained when exec(2) system call fails.

For example, hard resource limits are not restorable.

Consider to create a child process using ::spawn or #system if this is not acceptable.

exec "echo *"       # echoes list of files in current directory
# never get here

exec "echo", "*"    # echoes an asterisk
# never get here
exit(status=true) Show source
Kernel::exit(status=true)
Process::exit(status=true)
VALUE
rb_f_exit(int argc, const VALUE *argv)
{
    VALUE status;
    int istatus;

    if (argc > 0 && rb_scan_args(argc, argv, "01", &status) == 1) {
        istatus = exit_status_code(status);
    }
    else {
        istatus = EXIT_SUCCESS;
    }
    rb_exit(istatus);

    UNREACHABLE;
}

Initiates the termination of the Ruby script by raising the SystemExit exception. This exception may be caught. The optional parameter is used to return a status code to the invoking environment. true and FALSE of status means success and failure respectively. The interpretation of other integer values are system dependent.

begin
  exit
  puts "never get here"
rescue SystemExit
  puts "rescued a SystemExit exception"
end
puts "after begin block"

produces:

rescued a SystemExit exception
after begin block

Just prior to termination, Ruby executes any at_exit functions (see Kernel::at_exit) and runs any object finalizers (see ObjectSpace.define_finalizer).

at_exit { puts "at_exit function" }
ObjectSpace.define_finalizer("string",  proc { puts "in finalizer" })
exit

produces:

at_exit function
in finalizer
exit!(status=false) Show source
static VALUE
rb_f_exit_bang(int argc, VALUE *argv, VALUE obj)
{
    VALUE status;
    int istatus;

    if (argc > 0 && rb_scan_args(argc, argv, "01", &status) == 1) {
        istatus = exit_status_code(status);
    }
    else {
        istatus = EXIT_FAILURE;
    }
    _exit(istatus);

    UNREACHABLE;
}

Exits the process immediately. No exit handlers are run. status is returned to the underlying system as the exit status.

Process.exit!(true)
fail(string)
fail(exception [, string [, array]])
static VALUE
rb_f_raise(int argc, VALUE *argv)
{
    VALUE err;
    VALUE opts[raise_max_opt], *const cause = &opts[raise_opt_cause];

    argc = extract_raise_opts(argc, argv, opts);
    if (argc == 0) {
        if (*cause != Qundef) {
            rb_raise(rb_eArgError, "only cause is given with no arguments");
        }
        err = get_errinfo();
        if (!NIL_P(err)) {
            argc = 1;
            argv = &err;
        }
    }
    rb_raise_jump(rb_make_exception(argc, argv), *cause);

    UNREACHABLE;
}

With no arguments, raises the exception in $! or raises a RuntimeError if $! is nil. With a single String argument, raises a RuntimeError with the string as a message. Otherwise, the first parameter should be the name of an Exception class (or an object that returns an Exception object when sent an exception message). The optional second parameter sets the message associated with the exception, and the third parameter is an array of callback information. Exceptions are caught by the rescue clause of begin...end blocks.

raise "Failed to create socket"
raise ArgumentError, "No parameters", caller
fork [{ block }] → fixnum or nil Show source
fork [{ block }] → fixnum or nil
static VALUE
rb_f_fork(VALUE obj)
{
    rb_pid_t pid;

    rb_secure(2);

    switch (pid = rb_fork_ruby(NULL)) {
      case 0:
        rb_thread_atfork();
        if (rb_block_given_p()) {
            int status;

            rb_protect(rb_yield, Qundef, &status);
            ruby_stop(status);
        }
        return Qnil;

      case -1:
        rb_sys_fail("fork(2)");
        return Qnil;

      default:
        return PIDT2NUM(pid);
    }
}

Creates a subprocess. If a block is specified, that block is run in the subprocess, and the subprocess terminates with a status of zero. Otherwise, the fork call returns twice, once in the parent, returning the process ID of the child, and once in the child, returning nil. The child process can exit using Kernel.exit! to avoid running any at_exit functions. The parent process should use Process.wait to collect the termination statuses of its children or use Process.detach to register disinterest in their status; otherwise, the operating system may accumulate zombie processes.

The thread calling fork is the only thread in the created child process. fork doesn't copy other threads.

If fork is not usable, Process.respond_to?(:fork) returns false.

Note that fork(2) is not available on some platforms like Windows and NetBSD 4. Therefore you should use spawn() instead of fork().

format(format_string [, arguments...] ) → string Show source
VALUE
rb_f_sprintf(int argc, const VALUE *argv)
{
    return rb_str_format(argc - 1, argv + 1, GETNTHARG(0));
}

Returns the string resulting from applying format_string to any additional arguments. Within the format string, any characters other than format sequences are copied to the result.

The syntax of a format sequence is follows.

%[flags][width][.precision]type

A format sequence consists of a percent sign, followed by optional flags, width, and precision indicators, then terminated with a field type character. The field type controls how the corresponding sprintf argument is to be interpreted, while the flags modify that interpretation.

The field type characters are:

Field |  Integer Format
------+--------------------------------------------------------------
  b   | Convert argument as a binary number.
      | Negative numbers will be displayed as a two's complement
      | prefixed with `..1'.
  B   | Equivalent to `b', but uses an uppercase 0B for prefix
      | in the alternative format by #.
  d   | Convert argument as a decimal number.
  i   | Identical to `d'.
  o   | Convert argument as an octal number.
      | Negative numbers will be displayed as a two's complement
      | prefixed with `..7'.
  u   | Identical to `d'.
  x   | Convert argument as a hexadecimal number.
      | Negative numbers will be displayed as a two's complement
      | prefixed with `..f' (representing an infinite string of
      | leading 'ff's).
  X   | Equivalent to `x', but uses uppercase letters.

Field |  Float Format
------+--------------------------------------------------------------
  e   | Convert floating point argument into exponential notation
      | with one digit before the decimal point as [-]d.dddddde[+-]dd.
      | The precision specifies the number of digits after the decimal
      | point (defaulting to six).
  E   | Equivalent to `e', but uses an uppercase E to indicate
      | the exponent.
  f   | Convert floating point argument as [-]ddd.dddddd,
      | where the precision specifies the number of digits after
      | the decimal point.
  g   | Convert a floating point number using exponential form
      | if the exponent is less than -4 or greater than or
      | equal to the precision, or in dd.dddd form otherwise.
      | The precision specifies the number of significant digits.
  G   | Equivalent to `g', but use an uppercase `E' in exponent form.
  a   | Convert floating point argument as [-]0xh.hhhhp[+-]dd,
      | which is consisted from optional sign, "0x", fraction part
      | as hexadecimal, "p", and exponential part as decimal.
  A   | Equivalent to `a', but use uppercase `X' and `P'.

Field |  Other Format
------+--------------------------------------------------------------
  c   | Argument is the numeric code for a single character or
      | a single character string itself.
  p   | The valuing of argument.inspect.
  s   | Argument is a string to be substituted.  If the format
      | sequence contains a precision, at most that many characters
      | will be copied.
  %   | A percent sign itself will be displayed.  No argument taken.

The flags modifies the behavior of the formats. The flag characters are:

Flag     | Applies to    | Meaning
---------+---------------+-----------------------------------------
space    | bBdiouxX      | Leave a space at the start of
         | aAeEfgG       | non-negative numbers.
         | (numeric fmt) | For `o', `x', `X', `b' and `B', use
         |               | a minus sign with absolute value for
         |               | negative values.
---------+---------------+-----------------------------------------
(digit)$ | all           | Specifies the absolute argument number
         |               | for this field.  Absolute and relative
         |               | argument numbers cannot be mixed in a
         |               | sprintf string.
---------+---------------+-----------------------------------------
 #       | bBoxX         | Use an alternative format.
         | aAeEfgG       | For the conversions `o', increase the precision
         |               | until the first digit will be `0' if
         |               | it is not formatted as complements.
         |               | For the conversions `x', `X', `b' and `B'
         |               | on non-zero, prefix the result with ``0x'',
         |               | ``0X'', ``0b'' and ``0B'', respectively.
         |               | For `a', `A', `e', `E', `f', `g', and 'G',
         |               | force a decimal point to be added,
         |               | even if no digits follow.
         |               | For `g' and 'G', do not remove trailing zeros.
---------+---------------+-----------------------------------------
+        | bBdiouxX      | Add a leading plus sign to non-negative
         | aAeEfgG       | numbers.
         | (numeric fmt) | For `o', `x', `X', `b' and `B', use
         |               | a minus sign with absolute value for
         |               | negative values.
---------+---------------+-----------------------------------------
-        | all           | Left-justify the result of this conversion.
---------+---------------+-----------------------------------------
0 (zero) | bBdiouxX      | Pad with zeros, not spaces.
         | aAeEfgG       | For `o', `x', `X', `b' and `B', radix-1
         | (numeric fmt) | is used for negative numbers formatted as
         |               | complements.
---------+---------------+-----------------------------------------
*        | all           | Use the next argument as the field width.
         |               | If negative, left-justify the result. If the
         |               | asterisk is followed by a number and a dollar
         |               | sign, use the indicated argument as the width.

Examples of flags:

# `+' and space flag specifies the sign of non-negative numbers.
sprintf("%d", 123)  #=> "123"
sprintf("%+d", 123) #=> "+123"
sprintf("% d", 123) #=> " 123"

# `#' flag for `o' increases number of digits to show `0'.
# `+' and space flag changes format of negative numbers.
sprintf("%o", 123)   #=> "173"
sprintf("%#o", 123)  #=> "0173"
sprintf("%+o", -123) #=> "-173"
sprintf("%o", -123)  #=> "..7605"
sprintf("%#o", -123) #=> "..7605"

# `#' flag for `x' add a prefix `0x' for non-zero numbers.
# `+' and space flag disables complements for negative numbers.
sprintf("%x", 123)   #=> "7b"
sprintf("%#x", 123)  #=> "0x7b"
sprintf("%+x", -123) #=> "-7b"
sprintf("%x", -123)  #=> "..f85"
sprintf("%#x", -123) #=> "0x..f85"
sprintf("%#x", 0)    #=> "0"

# `#' for `X' uses the prefix `0X'.
sprintf("%X", 123)  #=> "7B"
sprintf("%#X", 123) #=> "0X7B"

# `#' flag for `b' add a prefix `0b' for non-zero numbers.
# `+' and space flag disables complements for negative numbers.
sprintf("%b", 123)   #=> "1111011"
sprintf("%#b", 123)  #=> "0b1111011"
sprintf("%+b", -123) #=> "-1111011"
sprintf("%b", -123)  #=> "..10000101"
sprintf("%#b", -123) #=> "0b..10000101"
sprintf("%#b", 0)    #=> "0"

# `#' for `B' uses the prefix `0B'.
sprintf("%B", 123)  #=> "1111011"
sprintf("%#B", 123) #=> "0B1111011"

# `#' for `e' forces to show the decimal point.
sprintf("%.0e", 1)  #=> "1e+00"
sprintf("%#.0e", 1) #=> "1.e+00"

# `#' for `f' forces to show the decimal point.
sprintf("%.0f", 1234)  #=> "1234"
sprintf("%#.0f", 1234) #=> "1234."

# `#' for `g' forces to show the decimal point.
# It also disables stripping lowest zeros.
sprintf("%g", 123.4)   #=> "123.4"
sprintf("%#g", 123.4)  #=> "123.400"
sprintf("%g", 123456)  #=> "123456"
sprintf("%#g", 123456) #=> "123456."

The field width is an optional integer, followed optionally by a period and a precision. The width specifies the minimum number of characters that will be written to the result for this field.

Examples of width:

# padding is done by spaces,       width=20
# 0 or radix-1.             <------------------>
sprintf("%20d", 123)   #=> "                 123"
sprintf("%+20d", 123)  #=> "                +123"
sprintf("%020d", 123)  #=> "00000000000000000123"
sprintf("%+020d", 123) #=> "+0000000000000000123"
sprintf("% 020d", 123) #=> " 0000000000000000123"
sprintf("%-20d", 123)  #=> "123                 "
sprintf("%-+20d", 123) #=> "+123                "
sprintf("%- 20d", 123) #=> " 123                "
sprintf("%020x", -123) #=> "..ffffffffffffffff85"

For numeric fields, the precision controls the number of decimal places displayed. For string fields, the precision determines the maximum number of characters to be copied from the string. (Thus, the format sequence %10.10s will always contribute exactly ten characters to the result.)

Examples of precisions:

# precision for `d', 'o', 'x' and 'b' is
# minimum number of digits               <------>
sprintf("%20.8d", 123)  #=> "            00000123"
sprintf("%20.8o", 123)  #=> "            00000173"
sprintf("%20.8x", 123)  #=> "            0000007b"
sprintf("%20.8b", 123)  #=> "            01111011"
sprintf("%20.8d", -123) #=> "           -00000123"
sprintf("%20.8o", -123) #=> "            ..777605"
sprintf("%20.8x", -123) #=> "            ..ffff85"
sprintf("%20.8b", -11)  #=> "            ..110101"

# "0x" and "0b" for `#x' and `#b' is not counted for
# precision but "0" for `#o' is counted.  <------>
sprintf("%#20.8d", 123)  #=> "            00000123"
sprintf("%#20.8o", 123)  #=> "            00000173"
sprintf("%#20.8x", 123)  #=> "          0x0000007b"
sprintf("%#20.8b", 123)  #=> "          0b01111011"
sprintf("%#20.8d", -123) #=> "           -00000123"
sprintf("%#20.8o", -123) #=> "            ..777605"
sprintf("%#20.8x", -123) #=> "          0x..ffff85"
sprintf("%#20.8b", -11)  #=> "          0b..110101"

# precision for `e' is number of
# digits after the decimal point           <------>
sprintf("%20.8e", 1234.56789) #=> "      1.23456789e+03"

# precision for `f' is number of
# digits after the decimal point               <------>
sprintf("%20.8f", 1234.56789) #=> "       1234.56789000"

# precision for `g' is number of
# significant digits                          <------->
sprintf("%20.8g", 1234.56789) #=> "           1234.5679"

#                                         <------->
sprintf("%20.8g", 123456789)  #=> "       1.2345679e+08"

# precision for `s' is
# maximum number of characters                    <------>
sprintf("%20.8s", "string test") #=> "            string t"

Examples:

sprintf("%d %04x", 123, 123)               #=> "123 007b"
sprintf("%08b '%4s'", 123, 123)            #=> "01111011 ' 123'"
sprintf("%1$*2$s %2$d %1$s", "hello", 8)   #=> "   hello 8 hello"
sprintf("%1$*2$s %2$d", "hello", -8)       #=> "hello    -8"
sprintf("%+g:% g:%-g", 1.23, 1.23, 1.23)   #=> "+1.23: 1.23:1.23"
sprintf("%u", -123)                        #=> "-123"

For more complex formatting, Ruby supports a reference by name. %<name>s style uses format style, but %{name} style doesn't.

Examples:

sprintf("%<foo>d : %<bar>f", { :foo => 1, :bar => 2 })
  #=> 1 : 2.000000
sprintf("%{foo}f", { :foo => 1 })
  # => "1f"
gem_original_require(path)

The #require from before RubyGems was loaded.

Alias for: require
gets(sep=$/) → string or nil Show source
gets(limit) → string or nil
gets(sep, limit) → string or nil
static VALUE
rb_f_gets(int argc, VALUE *argv, VALUE recv)
{
    if (recv == argf) {
        return argf_gets(argc, argv, argf);
    }
    return rb_funcall2(argf, idGets, argc, argv);
}

Returns (and assigns to $_) the next line from the list of files in ARGV (or $*), or from standard input if no files are present on the command line. Returns nil at end of file. The optional argument specifies the record separator. The separator is included with the contents of each record. A separator of nil reads the entire contents, and a zero-length separator reads the input one paragraph at a time, where paragraphs are divided by two consecutive newlines. If the first argument is an integer, or optional second argument is given, the returning string would not be longer than the given value in bytes. If multiple filenames are present in ARGV, gets(nil) will read the contents one file at a time.

ARGV << "testfile"
print while gets

produces:

This is line one
This is line two
This is line three
And so on...

The style of programming using $_ as an implicit parameter is gradually losing favor in the Ruby community.

global_variables → array Show source
VALUE
rb_f_global_variables(void)
{
    VALUE ary = rb_ary_new();
    char buf[2];
    int i;

    st_foreach_safe(rb_global_tbl, gvar_i, ary);
    buf[0] = '$';
    for (i = 1; i <= 9; ++i) {
	buf[1] = (char)(i + '0');
	rb_ary_push(ary, ID2SYM(rb_intern2(buf, 2)));
    }
    return ary;
}

Returns an array of the names of global variables.

global_variables.grep /std/   #=> [:$stdin, :$stdout, :$stderr]
gsub(pattern, replacement) → $_ Show source
gsub(pattern) {|...| block } → $_
static VALUE
rb_f_gsub(int argc, VALUE *argv)
{
    VALUE str = rb_funcall_passing_block(uscore_get(), rb_intern("gsub"), argc, argv);
    rb_lastline_set(str);
    return str;
}

Equivalent to $_.gsub..., except that $_ will be updated if substitution occurs. Available only when -p/-n command line option specified.

iterator? → true or false Show source
VALUE
rb_f_block_given_p(void)
{
    rb_thread_t *th = GET_THREAD();
    rb_control_frame_t *cfp = th->cfp;
    cfp = vm_get_ruby_level_caller_cfp(th, RUBY_VM_PREVIOUS_CONTROL_FRAME(cfp));

    if (cfp != 0 && VM_CF_BLOCK_PTR(cfp)) {
        return Qtrue;
    }
    else {
        return Qfalse;
    }
}

Returns true if yield would execute a block in the current context. The iterator? form is mildly deprecated.

def try
  if block_given?
    yield
  else
    "no block"
  end
end
try                  #=> "no block"
try { "hello" }      #=> "hello"
try do "hello" end   #=> "hello"
lambda { |...| block } → a_proc Show source
VALUE
rb_block_lambda(void)
{
    return proc_new(rb_cProc, TRUE);
}

Equivalent to Proc.new, except the resulting Proc objects check the number of parameters passed when called.

load(filename, wrap=false) → true Show source
static VALUE
rb_f_load(int argc, VALUE *argv)
{
    VALUE fname, wrap, path, orig_fname;

    rb_scan_args(argc, argv, "11", &fname, &wrap);

    if (RUBY_DTRACE_LOAD_ENTRY_ENABLED()) {
        RUBY_DTRACE_LOAD_ENTRY(StringValuePtr(fname),
                               rb_sourcefile(),
                               rb_sourceline());
    }

    orig_fname = FilePathValue(fname);
    fname = rb_str_encode_ospath(orig_fname);
    path = rb_find_file(fname);
    if (!path) {
        if (!rb_file_load_ok(RSTRING_PTR(fname)))
            load_failed(orig_fname);
        path = fname;
    }
    rb_load_internal(path, RTEST(wrap));

    if (RUBY_DTRACE_LOAD_RETURN_ENABLED()) {
        RUBY_DTRACE_LOAD_RETURN(StringValuePtr(fname),
                               rb_sourcefile(),
                               rb_sourceline());
    }

    return Qtrue;
}

Loads and executes the Ruby program in the file filename. If the filename does not resolve to an absolute path, the file is searched for in the library directories listed in $:. If the optional wrap parameter is true, the loaded script will be executed under an anonymous module, protecting the calling program's global namespace. In no circumstance will any local variables in the loaded file be propagated to the loading environment.

local_variables → array Show source
static VALUE
rb_f_local_variables(void)
{
    struct local_var_list vars;
    rb_thread_t *th = GET_THREAD();
    rb_control_frame_t *cfp =
        vm_get_ruby_level_caller_cfp(th, RUBY_VM_PREVIOUS_CONTROL_FRAME(th->cfp));
    int i;

    local_var_list_init(&vars);
    while (cfp) {
        if (cfp->iseq) {
            for (i = 0; i < cfp->iseq->local_table_size; i++) {
                local_var_list_add(&vars, cfp->iseq->local_table[i]);
            }
        }
        if (!VM_EP_LEP_P(cfp->ep)) {
            /* block */
            VALUE *ep = VM_CF_PREV_EP(cfp);

            if (vm_collect_local_variables_in_heap(th, ep, &vars)) {
                break;
            }
            else {
                while (cfp->ep != ep) {
                    cfp = RUBY_VM_PREVIOUS_CONTROL_FRAME(cfp);
                }
            }
        }
        else {
            break;
        }
    }
    return local_var_list_finish(&vars);
}

Returns the names of the current local variables.

fred = 1
for i in 1..10
   # ...
end
local_variables   #=> [:fred, :i]
loop { block } Show source
loop → an_enumerator
static VALUE
rb_f_loop(VALUE self)
{
    RETURN_SIZED_ENUMERATOR(self, 0, 0, rb_f_loop_size);
    rb_rescue2(loop_i, (VALUE)0, 0, 0, rb_eStopIteration, (VALUE)0);
    return Qnil;                /* dummy */
}

Repeatedly executes the block.

If no block is given, an enumerator is returned instead.

loop do
  print "Input: "
  line = gets
  break if !line or line =~ /^qQ/
  # ...
end

StopIteration raised in the block breaks the loop.

p(obj) → obj Show source
p(obj1, obj2, ...) → [obj, ...]
p() → nil
static VALUE
rb_f_p(int argc, VALUE *argv, VALUE self)
{
    struct rb_f_p_arg arg;
    arg.argc = argc;
    arg.argv = argv;

    return rb_uninterruptible(rb_f_p_internal, (VALUE)&arg);
}

For each object, directly writes obj.inspect followed by a newline to the program's standard output.

S = Struct.new(:name, :state)
s = S['dave', 'TX']
p s

produces:

#<S name="dave", state="TX">
pretty_inspect() Show source
# File lib/pp.rb, line 11
def pretty_inspect
  PP.pp(self, '')
end

Returns a pretty printed object as a string.

In order to use this method you must first require the PP module:

require 'pp'

See the PP module for more information.

print(obj, ...) → nil Show source

Prints each object in turn to $stdout. If the output field separator ($,) is not nil, its contents will appear between each field. If the output record separator ($\) is not nil, it will be appended to the output. If no arguments are given, prints $_. Objects that aren't strings will be converted by calling their to_s method.

print "cat", [1,2,3], 99, "\n"
$, = ", "
$\ = "\n"
print "cat", [1,2,3], 99

produces:

cat12399
cat, 1, 2, 3, 99
printf(io, string [, obj ... ]) → nil Show source
printf(string [, obj ... ]) → nil
static VALUE
rb_f_printf(int argc, VALUE *argv)
{
    VALUE out;

    if (argc == 0) return Qnil;
    if (RB_TYPE_P(argv[0], T_STRING)) {
        out = rb_stdout;
    }
    else {
        out = argv[0];
        argv++;
        argc--;
    }
    rb_io_write(out, rb_f_sprintf(argc, argv));

    return Qnil;
}

Equivalent to:

io.write(sprintf(string, obj, ...))

or

$stdout.write(sprintf(string, obj, ...))
proc { |...| block } → a_proc Show source
VALUE
rb_block_proc(void)
{
    return proc_new(rb_cProc, FALSE);
}

Equivalent to Proc.new.

putc(int) → int Show source
static VALUE
rb_f_putc(VALUE recv, VALUE ch)
{
    if (recv == rb_stdout) {
        return rb_io_putc(recv, ch);
    }
    return rb_funcall2(rb_stdout, rb_intern("putc"), 1, &ch);
}

Equivalent to:

$stdout.putc(int)

Refer to the documentation for IO#putc for important information regarding multi-byte characters.

puts(obj, ...) → nil Show source
static VALUE
rb_f_puts(int argc, VALUE *argv, VALUE recv)
{
    if (recv == rb_stdout) {
        return rb_io_puts(argc, argv, recv);
    }
    return rb_funcall2(rb_stdout, rb_intern("puts"), argc, argv);
}

Equivalent to

$stdout.puts(obj, ...)
raise Show source
raise(string)
raise(exception [, string [, array]])
static VALUE
rb_f_raise(int argc, VALUE *argv)
{
    VALUE err;
    VALUE opts[raise_max_opt], *const cause = &opts[raise_opt_cause];

    argc = extract_raise_opts(argc, argv, opts);
    if (argc == 0) {
        if (*cause != Qundef) {
            rb_raise(rb_eArgError, "only cause is given with no arguments");
        }
        err = get_errinfo();
        if (!NIL_P(err)) {
            argc = 1;
            argv = &err;
        }
    }
    rb_raise_jump(rb_make_exception(argc, argv), *cause);

    UNREACHABLE;
}

With no arguments, raises the exception in $! or raises a RuntimeError if $! is nil. With a single String argument, raises a RuntimeError with the string as a message. Otherwise, the first parameter should be the name of an Exception class (or an object that returns an Exception object when sent an exception message). The optional second parameter sets the message associated with the exception, and the third parameter is an array of callback information. Exceptions are caught by the rescue clause of begin...end blocks.

raise "Failed to create socket"
raise ArgumentError, "No parameters", caller
rand(max=0) → number Show source
static VALUE
rb_f_rand(int argc, VALUE *argv, VALUE obj)
{
    VALUE v, vmax, r;
    struct MT *mt = default_mt();

    if (argc == 0) goto zero_arg;
    rb_scan_args(argc, argv, "01", &vmax);
    if (NIL_P(vmax)) goto zero_arg;
    if ((v = rand_range(mt, vmax)) != Qfalse) {
        return v;
    }
    vmax = rb_to_int(vmax);
    if (vmax == INT2FIX(0) || NIL_P(r = rand_int(mt, vmax, 0))) {
      zero_arg:
        return DBL2NUM(genrand_real(mt));
    }
    return r;
}

If called without an argument, or if max.to_i.abs == 0, rand returns a pseudo-random floating point number between 0.0 and 1.0, including 0.0 and excluding 1.0.

rand        #=> 0.2725926052826416

When max.abs is greater than or equal to 1, rand returns a pseudo-random integer greater than or equal to 0 and less than max.to_i.abs.

rand(100)   #=> 12

When max is a Range, rand returns a random number where range.member?(number) == true.

Negative or floating point values for max are allowed, but may give surprising results.

rand(-100) # => 87
rand(-0.5) # => 0.8130921818028143
rand(1.9)  # equivalent to rand(1), which is always 0

#srand may be used to ensure that sequences of random numbers are reproducible between different runs of a program.

See also Random#rand.

readline(sep=$/) → string Show source
readline(limit) → string
readline(sep, limit) → string
static VALUE
rb_f_readline(int argc, VALUE *argv, VALUE recv)
{
    if (recv == argf) {
        return argf_readline(argc, argv, argf);
    }
    return rb_funcall2(argf, rb_intern("readline"), argc, argv);
}

Equivalent to Kernel::gets, except readline raises EOFError at end of file.

readlines(sep=$/) → array Show source
readlines(limit) → array
readlines(sep, limit) → array
static VALUE
rb_f_readlines(int argc, VALUE *argv, VALUE recv)
{
    if (recv == argf) {
        return argf_readlines(argc, argv, argf);
    }
    return rb_funcall2(argf, rb_intern("readlines"), argc, argv);
}

Returns an array containing the lines returned by calling Kernel.gets(sep) until the end of file.

require_relative(string) → true or false Show source
VALUE
rb_f_require_relative(VALUE obj, VALUE fname)
{
    VALUE base = rb_current_realfilepath();
    if (NIL_P(base)) {
        rb_loaderror("cannot infer basepath");
    }
    base = rb_file_dirname(base);
    return rb_require_safe(rb_file_absolute_path(fname, base), rb_safe_level());
}

Ruby tries to load the library named string relative to the requiring file's path. If the file's path cannot be determined a LoadError is raised. If a file is loaded true is returned and false otherwise.

select(read_array [, write_array [, error_array [, timeout]]]) → array or nil Show source
static VALUE
rb_f_select(int argc, VALUE *argv, VALUE obj)
{
    VALUE timeout;
    struct select_args args;
    struct timeval timerec;
    int i;

    rb_scan_args(argc, argv, "13", &args.read, &args.write, &args.except, &timeout);
    if (NIL_P(timeout)) {
        args.timeout = 0;
    }
    else {
        timerec = rb_time_interval(timeout);
        args.timeout = &timerec;
    }

    for (i = 0; i < numberof(args.fdsets); ++i)
        rb_fd_init(&args.fdsets[i]);

    return rb_ensure(select_call, (VALUE)&args, select_end, (VALUE)&args);
}

Calls select(2) system call. It monitors given arrays of IO objects, waits one or more of IO objects ready for reading, are ready for writing, and have pending exceptions respectively, and returns an array that contains arrays of those IO objects. It will return nil if optional timeout value is given and no IO object is ready in timeout seconds.

IO.select peeks the buffer of IO objects for testing readability. If the IO buffer is not empty, IO.select immediately notify readability. This “peek” is only happen for IO objects. It is not happen for IO-like objects such as OpenSSL::SSL::SSLSocket.

The best way to use IO.select is invoking it after nonblocking methods such as read_nonblock, write_nonblock, etc. The methods raises an exception which is extended by IO::WaitReadable or IO::WaitWritable. The modules notify how the caller should wait with IO.select. If IO::WaitReadable is raised, the caller should wait for reading. If IO::WaitWritable is raised, the caller should wait for writing.

So, blocking read (readpartial) can be emulated using read_nonblock and IO.select as follows:

begin
  result = io_like.read_nonblock(maxlen)
rescue IO::WaitReadable
  IO.select([io_like])
  retry
rescue IO::WaitWritable
  IO.select(nil, [io_like])
  retry
end

Especially, the combination of nonblocking methods and IO.select is preferred for IO like objects such as OpenSSL::SSL::SSLSocket. It has to_io method to return underlying IO object. IO.select calls to_io to obtain the file descriptor to wait.

This means that readability notified by IO.select doesn't mean readability from OpenSSL::SSL::SSLSocket object.

Most possible situation is OpenSSL::SSL::SSLSocket buffers some data. IO.select doesn't see the buffer. So IO.select can block when OpenSSL::SSL::SSLSocket#readpartial doesn't block.

However several more complicated situation exists.

SSL is a protocol which is sequence of records. The record consists multiple bytes. So, the remote side of SSL sends a partial record, IO.select notifies readability but OpenSSL::SSL::SSLSocket cannot decrypt a byte and OpenSSL::SSL::SSLSocket#readpartial will blocks.

Also, the remote side can request SSL renegotiation which forces the local SSL engine writes some data. This means OpenSSL::SSL::SSLSocket#readpartial may invoke write system call and it can block. In such situation, OpenSSL::SSL::SSLSocket#read_nonblock raises IO::WaitWritable instead of blocking. So, the caller should wait for ready for writability as above example.

The combination of nonblocking methods and IO.select is also useful for streams such as tty, pipe socket socket when multiple process read form a stream.

Finally, Linux kernel developers doesn't guarantee that readability of select(2) means readability of following read(2) even for single process. See select(2) manual on GNU/Linux system.

Invoking IO.select before IO#readpartial works well in usual. However it is not the best way to use IO.select.

The writability notified by select(2) doesn't show how many bytes writable. IO#write method blocks until given whole string is written. So, IO#write(two or more bytes) can block after writability is notified by IO.select. IO#write_nonblock is required to avoid the blocking.

Blocking write (write) can be emulated using write_nonblock and IO.select as follows: IO::WaitReadable should also be rescued for SSL renegotiation in OpenSSL::SSL::SSLSocket.

while 0 < string.bytesize
  begin
    written = io_like.write_nonblock(string)
  rescue IO::WaitReadable
    IO.select([io_like])
    retry
  rescue IO::WaitWritable
    IO.select(nil, [io_like])
    retry
  end
  string = string.byteslice(written..-1)
end

Parameters

read_array

an array of IO objects that wait until ready for read

write_array

an array of IO objects that wait until ready for write

error_array

an array of IO objects that wait for exceptions

timeout

a numeric value in second

Example

rp, wp = IO.pipe
mesg = "ping "
100.times {
  # IO.select follows IO#read.  Not the best way to use IO.select.
  rs, ws, = IO.select([rp], [wp])
  if r = rs[0]
    ret = r.read(5)
    print ret
    case ret
    when /ping/
      mesg = "pong\n"
    when /pong/
      mesg = "ping "
    end
  end
  if w = ws[0]
    w.write(mesg)
  end
}

produces:

ping pong
ping pong
ping pong
(snipped)
ping
set_trace_func(proc) → proc Show source
set_trace_func(nil) → nil
static VALUE
set_trace_func(VALUE obj, VALUE trace)
{

    rb_remove_event_hook(call_trace_func);

    if (NIL_P(trace)) {
        return Qnil;
    }

    if (!rb_obj_is_proc(trace)) {
        rb_raise(rb_eTypeError, "trace_func needs to be Proc");
    }

    rb_add_event_hook(call_trace_func, RUBY_EVENT_ALL, trace);
    return trace;
}

Establishes proc as the handler for tracing, or disables tracing if the parameter is nil.

Note: this method is obsolete, please use TracePoint instead.

proc takes up to six parameters:

  • an event name

  • a filename

  • a line number

  • an object id

  • a binding

  • the name of a class

proc is invoked whenever an event occurs.

Events are:

c-call

call a C-language routine

c-return

return from a C-language routine

call

call a Ruby method

class

start a class or module definition),

end

finish a class or module definition),

line

execute code on a new line

raise

raise an exception

return

return from a Ruby method

Tracing is disabled within the context of proc.

  class Test
  def test
    a = 1
    b = 2
  end
  end

  set_trace_func proc { |event, file, line, id, binding, classname|
     printf "%8s %s:%-2d %10s %8s\n", event, file, line, id, classname
  }
  t = Test.new
  t.test

    line prog.rb:11               false
  c-call prog.rb:11        new    Class
  c-call prog.rb:11 initialize   Object
c-return prog.rb:11 initialize   Object
c-return prog.rb:11        new    Class
    line prog.rb:12               false
    call prog.rb:2        test     Test
    line prog.rb:3        test     Test
    line prog.rb:4        test     Test
  return prog.rb:4        test     Test
sleep([duration]) → fixnum Show source
static VALUE
rb_f_sleep(int argc, VALUE *argv)
{
    time_t beg, end;

    beg = time(0);
    if (argc == 0) {
        rb_thread_sleep_forever();
    }
    else {
        rb_check_arity(argc, 0, 1);
        rb_thread_wait_for(rb_time_interval(argv[0]));
    }

    end = time(0) - beg;

    return INT2FIX(end);
}

Suspends the current thread for duration seconds (which may be any number, including a Float with fractional seconds). Returns the actual number of seconds slept (rounded), which may be less than that asked for if another thread calls Thread#run. Called without an argument, sleep() will sleep forever.

Time.new    #=> 2008-03-08 19:56:19 +0900
sleep 1.2   #=> 1
Time.new    #=> 2008-03-08 19:56:20 +0900
sleep 1.9   #=> 2
Time.new    #=> 2008-03-08 19:56:22 +0900
spawn([env,] command... [,options]) → pid Show source
spawn([env,] command... [,options]) → pid
static VALUE
rb_f_spawn(int argc, VALUE *argv)
{
    rb_pid_t pid;
    char errmsg[CHILD_ERRMSG_BUFLEN] = { '\0' };
    VALUE execarg_obj, fail_str;
    struct rb_execarg *eargp;

    execarg_obj = rb_execarg_new(argc, argv, TRUE);
    eargp = rb_execarg_get(execarg_obj);
    rb_execarg_fixup(execarg_obj);
    fail_str = eargp->use_shell ? eargp->invoke.sh.shell_script : eargp->invoke.cmd.command_name;

    pid = rb_spawn_process(eargp, errmsg, sizeof(errmsg));
    RB_GC_GUARD(execarg_obj);

    if (pid == -1) {
        const char *prog = errmsg;
        if (!prog[0]) {
            rb_sys_fail_str(fail_str);
        }
        rb_sys_fail(prog);
    }
#if defined(HAVE_WORKING_FORK) || defined(HAVE_SPAWNV)
    return PIDT2NUM(pid);
#else
    return Qnil;
#endif
}

spawn executes specified command and return its pid.

pid = spawn("tar xf ruby-2.0.0-p195.tar.bz2")
Process.wait pid

pid = spawn(RbConfig.ruby, "-eputs'Hello, world!'")
Process.wait pid

This method is similar to #system but it doesn't wait for the command to finish.

The parent process should use Process.wait to collect the termination status of its child or use Process.detach to register disinterest in their status; otherwise, the operating system may accumulate zombie processes.

spawn has bunch of options to specify process attributes:

env: hash
  name => val : set the environment variable
  name => nil : unset the environment variable
command...:
  commandline                 : command line string which is passed to the standard shell
  cmdname, arg1, ...          : command name and one or more arguments (This form does not use the shell. See below for caveats.)
  [cmdname, argv0], arg1, ... : command name, argv[0] and zero or more arguments (no shell)
options: hash
  clearing environment variables:
    :unsetenv_others => true   : clear environment variables except specified by env
    :unsetenv_others => false  : don't clear (default)
  process group:
    :pgroup => true or 0 : make a new process group
    :pgroup => pgid      : join to specified process group
    :pgroup => nil       : don't change the process group (default)
  create new process group: Windows only
    :new_pgroup => true  : the new process is the root process of a new process group
    :new_pgroup => false : don't create a new process group (default)
  resource limit: resourcename is core, cpu, data, etc.  See Process.setrlimit.
    :rlimit_resourcename => limit
    :rlimit_resourcename => [cur_limit, max_limit]
  umask:
    :umask => int
  redirection:
    key:
      FD              : single file descriptor in child process
      [FD, FD, ...]   : multiple file descriptor in child process
    value:
      FD                        : redirect to the file descriptor in parent process
      string                    : redirect to file with open(string, "r" or "w")
      [string]                  : redirect to file with open(string, File::RDONLY)
      [string, open_mode]       : redirect to file with open(string, open_mode, 0644)
      [string, open_mode, perm] : redirect to file with open(string, open_mode, perm)
      [:child, FD]              : redirect to the redirected file descriptor
      :close                    : close the file descriptor in child process
    FD is one of follows
      :in     : the file descriptor 0 which is the standard input
      :out    : the file descriptor 1 which is the standard output
      :err    : the file descriptor 2 which is the standard error
      integer : the file descriptor of specified the integer
      io      : the file descriptor specified as io.fileno
  file descriptor inheritance: close non-redirected non-standard fds (3, 4, 5, ...) or not
    :close_others => true  : don't inherit
  current directory:
    :chdir => str

  The 'cmdname, arg1, ...' form does not use the shell. However,
  on different OSes, different things are provided as built-in
  commands. An example of this is 'echo', which is a built-in
  on Windows, but is a normal program on Linux and Mac OS X.
  This means that `Process.spawn 'echo', '%Path%'` will display
  the contents of the `%Path%` environment variable on Windows,
  but `Process.spawn 'echo', '$PATH'` prints the literal '$PATH'.

If a hash is given as env, the environment is updated by env before exec(2) in the child process. If a pair in env has nil as the value, the variable is deleted.

# set FOO as BAR and unset BAZ.
pid = spawn({"FOO"=>"BAR", "BAZ"=>nil}, command)

If a hash is given as options, it specifies process group, create new process group, resource limit, current directory, umask and redirects for the child process. Also, it can be specified to clear environment variables.

The :unsetenv_others key in options specifies to clear environment variables, other than specified by env.

pid = spawn(command, :unsetenv_others=>true) # no environment variable
pid = spawn({"FOO"=>"BAR"}, command, :unsetenv_others=>true) # FOO only

The :pgroup key in options specifies a process group. The corresponding value should be true, zero or positive integer. true and zero means the process should be a process leader of a new process group. Other values specifies a process group to be belongs.

pid = spawn(command, :pgroup=>true) # process leader
pid = spawn(command, :pgroup=>10) # belongs to the process group 10

The :new_pgroup key in options specifies to pass CREATE_NEW_PROCESS_GROUP flag to CreateProcessW() that is Windows API. This option is only for Windows. true means the new process is the root process of the new process group. The new process has CTRL+C disabled. This flag is necessary for Process.kill(:SIGINT, pid) on the subprocess. :new_pgroup is false by default.

pid = spawn(command, :new_pgroup=>true)  # new process group
pid = spawn(command, :new_pgroup=>false) # same process group

The :rlimit_foo key specifies a resource limit. foo should be one of resource types such as core. The corresponding value should be an integer or an array which have one or two integers: same as cur_limit and max_limit arguments for Process.setrlimit.

cur, max = Process.getrlimit(:CORE)
pid = spawn(command, :rlimit_core=>[0,max]) # disable core temporary.
pid = spawn(command, :rlimit_core=>max) # enable core dump
pid = spawn(command, :rlimit_core=>0) # never dump core.

The :umask key in options specifies the umask.

pid = spawn(command, :umask=>077)

The :in, :out, :err, a fixnum, an IO and an array key specifies a redirection. The redirection maps a file descriptor in the child process.

For example, stderr can be merged into stdout as follows:

pid = spawn(command, :err=>:out)
pid = spawn(command, 2=>1)
pid = spawn(command, STDERR=>:out)
pid = spawn(command, STDERR=>STDOUT)

The hash keys specifies a file descriptor in the child process started by spawn. :err, 2 and STDERR specifies the standard error stream (stderr).

The hash values specifies a file descriptor in the parent process which invokes spawn. :out, 1 and STDOUT specifies the standard output stream (stdout).

In the above example, the standard output in the child process is not specified. So it is inherited from the parent process.

The standard input stream (stdin) can be specified by :in, 0 and STDIN.

A filename can be specified as a hash value.

pid = spawn(command, :in=>"/dev/null") # read mode
pid = spawn(command, :out=>"/dev/null") # write mode
pid = spawn(command, :err=>"log") # write mode
pid = spawn(command, [:out, :err]=>"/dev/null") # write mode
pid = spawn(command, 3=>"/dev/null") # read mode

For stdout and stderr (and combination of them), it is opened in write mode. Otherwise read mode is used.

For specifying flags and permission of file creation explicitly, an array is used instead.

pid = spawn(command, :in=>["file"]) # read mode is assumed
pid = spawn(command, :in=>["file", "r"])
pid = spawn(command, :out=>["log", "w"]) # 0644 assumed
pid = spawn(command, :out=>["log", "w", 0600])
pid = spawn(command, :out=>["log", File::WRONLY|File::EXCL|File::CREAT, 0600])

The array specifies a filename, flags and permission. The flags can be a string or an integer. If the flags is omitted or nil, File::RDONLY is assumed. The permission should be an integer. If the permission is omitted or nil, 0644 is assumed.

If an array of IOs and integers are specified as a hash key, all the elements are redirected.

# stdout and stderr is redirected to log file.
# The file "log" is opened just once.
pid = spawn(command, [:out, :err]=>["log", "w"])

Another way to merge multiple file descriptors is [:child, fd]. [:child, fd] means the file descriptor in the child process. This is different from fd. For example, :err=>:out means redirecting child stderr to parent stdout. But :err=>[:child, :out] means redirecting child stderr to child stdout. They differ if stdout is redirected in the child process as follows.

# stdout and stderr is redirected to log file.
# The file "log" is opened just once.
pid = spawn(command, :out=>["log", "w"], :err=>[:child, :out])

[:child, :out] can be used to merge stderr into stdout in IO.popen. In this case, IO.popen redirects stdout to a pipe in the child process and [:child, :out] refers the redirected stdout.

io = IO.popen(["sh", "-c", "echo out; echo err >&2", :err=>[:child, :out]])
p io.read #=> "out\nerr\n"

The :chdir key in options specifies the current directory.

pid = spawn(command, :chdir=>"/var/tmp")

spawn closes all non-standard unspecified descriptors by default. The “standard” descriptors are 0, 1 and 2. This behavior is specified by :close_others option. :close_others doesn't affect the standard descriptors which are closed only if :close is specified explicitly.

pid = spawn(command, :close_others=>true)  # close 3,4,5,... (default)
pid = spawn(command, :close_others=>false) # don't close 3,4,5,...

:close_others is true by default for spawn and IO.popen.

Note that fds which close-on-exec flag is already set are closed regardless of :close_others option.

So IO.pipe and spawn can be used as IO.popen.

# similar to r = IO.popen(command)
r, w = IO.pipe
pid = spawn(command, :out=>w)   # r, w is closed in the child process.
w.close

:close is specified as a hash value to close a fd individually.

f = open(foo)
system(command, f=>:close)        # don't inherit f.

If a file descriptor need to be inherited, io=>io can be used.

# valgrind has --log-fd option for log destination.
# log_w=>log_w indicates log_w.fileno inherits to child process.
log_r, log_w = IO.pipe
pid = spawn("valgrind", "--log-fd=#{log_w.fileno}", "echo", "a", log_w=>log_w)
log_w.close
p log_r.read

It is also possible to exchange file descriptors.

pid = spawn(command, :out=>:err, :err=>:out)

The hash keys specify file descriptors in the child process. The hash values specifies file descriptors in the parent process. So the above specifies exchanging stdout and stderr. Internally, spawn uses an extra file descriptor to resolve such cyclic file descriptor mapping.

See Kernel.exec for the standard shell.

sprintf(format_string [, arguments...] ) → string Show source
VALUE
rb_f_sprintf(int argc, const VALUE *argv)
{
    return rb_str_format(argc - 1, argv + 1, GETNTHARG(0));
}

Returns the string resulting from applying format_string to any additional arguments. Within the format string, any characters other than format sequences are copied to the result.

The syntax of a format sequence is follows.

%[flags][width][.precision]type

A format sequence consists of a percent sign, followed by optional flags, width, and precision indicators, then terminated with a field type character. The field type controls how the corresponding sprintf argument is to be interpreted, while the flags modify that interpretation.

The field type characters are:

Field |  Integer Format
------+--------------------------------------------------------------
  b   | Convert argument as a binary number.
      | Negative numbers will be displayed as a two's complement
      | prefixed with `..1'.
  B   | Equivalent to `b', but uses an uppercase 0B for prefix
      | in the alternative format by #.
  d   | Convert argument as a decimal number.
  i   | Identical to `d'.
  o   | Convert argument as an octal number.
      | Negative numbers will be displayed as a two's complement
      | prefixed with `..7'.
  u   | Identical to `d'.
  x   | Convert argument as a hexadecimal number.
      | Negative numbers will be displayed as a two's complement
      | prefixed with `..f' (representing an infinite string of
      | leading 'ff's).
  X   | Equivalent to `x', but uses uppercase letters.

Field |  Float Format
------+--------------------------------------------------------------
  e   | Convert floating point argument into exponential notation
      | with one digit before the decimal point as [-]d.dddddde[+-]dd.
      | The precision specifies the number of digits after the decimal
      | point (defaulting to six).
  E   | Equivalent to `e', but uses an uppercase E to indicate
      | the exponent.
  f   | Convert floating point argument as [-]ddd.dddddd,
      | where the precision specifies the number of digits after
      | the decimal point.
  g   | Convert a floating point number using exponential form
      | if the exponent is less than -4 or greater than or
      | equal to the precision, or in dd.dddd form otherwise.
      | The precision specifies the number of significant digits.
  G   | Equivalent to `g', but use an uppercase `E' in exponent form.
  a   | Convert floating point argument as [-]0xh.hhhhp[+-]dd,
      | which is consisted from optional sign, "0x", fraction part
      | as hexadecimal, "p", and exponential part as decimal.
  A   | Equivalent to `a', but use uppercase `X' and `P'.

Field |  Other Format
------+--------------------------------------------------------------
  c   | Argument is the numeric code for a single character or
      | a single character string itself.
  p   | The valuing of argument.inspect.
  s   | Argument is a string to be substituted.  If the format
      | sequence contains a precision, at most that many characters
      | will be copied.
  %   | A percent sign itself will be displayed.  No argument taken.

The flags modifies the behavior of the formats. The flag characters are:

Flag     | Applies to    | Meaning
---------+---------------+-----------------------------------------
space    | bBdiouxX      | Leave a space at the start of
         | aAeEfgG       | non-negative numbers.
         | (numeric fmt) | For `o', `x', `X', `b' and `B', use
         |               | a minus sign with absolute value for
         |               | negative values.
---------+---------------+-----------------------------------------
(digit)$ | all           | Specifies the absolute argument number
         |               | for this field.  Absolute and relative
         |               | argument numbers cannot be mixed in a
         |               | sprintf string.
---------+---------------+-----------------------------------------
 #       | bBoxX         | Use an alternative format.
         | aAeEfgG       | For the conversions `o', increase the precision
         |               | until the first digit will be `0' if
         |               | it is not formatted as complements.
         |               | For the conversions `x', `X', `b' and `B'
         |               | on non-zero, prefix the result with ``0x'',
         |               | ``0X'', ``0b'' and ``0B'', respectively.
         |               | For `a', `A', `e', `E', `f', `g', and 'G',
         |               | force a decimal point to be added,
         |               | even if no digits follow.
         |               | For `g' and 'G', do not remove trailing zeros.
---------+---------------+-----------------------------------------
+        | bBdiouxX      | Add a leading plus sign to non-negative
         | aAeEfgG       | numbers.
         | (numeric fmt) | For `o', `x', `X', `b' and `B', use
         |               | a minus sign with absolute value for
         |               | negative values.
---------+---------------+-----------------------------------------
-        | all           | Left-justify the result of this conversion.
---------+---------------+-----------------------------------------
0 (zero) | bBdiouxX      | Pad with zeros, not spaces.
         | aAeEfgG       | For `o', `x', `X', `b' and `B', radix-1
         | (numeric fmt) | is used for negative numbers formatted as
         |               | complements.
---------+---------------+-----------------------------------------
*        | all           | Use the next argument as the field width.
         |               | If negative, left-justify the result. If the
         |               | asterisk is followed by a number and a dollar
         |               | sign, use the indicated argument as the width.

Examples of flags:

# `+' and space flag specifies the sign of non-negative numbers.
sprintf("%d", 123)  #=> "123"
sprintf("%+d", 123) #=> "+123"
sprintf("% d", 123) #=> " 123"

# `#' flag for `o' increases number of digits to show `0'.
# `+' and space flag changes format of negative numbers.
sprintf("%o", 123)   #=> "173"
sprintf("%#o", 123)  #=> "0173"
sprintf("%+o", -123) #=> "-173"
sprintf("%o", -123)  #=> "..7605"
sprintf("%#o", -123) #=> "..7605"

# `#' flag for `x' add a prefix `0x' for non-zero numbers.
# `+' and space flag disables complements for negative numbers.
sprintf("%x", 123)   #=> "7b"
sprintf("%#x", 123)  #=> "0x7b"
sprintf("%+x", -123) #=> "-7b"
sprintf("%x", -123)  #=> "..f85"
sprintf("%#x", -123) #=> "0x..f85"
sprintf("%#x", 0)    #=> "0"

# `#' for `X' uses the prefix `0X'.
sprintf("%X", 123)  #=> "7B"
sprintf("%#X", 123) #=> "0X7B"

# `#' flag for `b' add a prefix `0b' for non-zero numbers.
# `+' and space flag disables complements for negative numbers.
sprintf("%b", 123)   #=> "1111011"
sprintf("%#b", 123)  #=> "0b1111011"
sprintf("%+b", -123) #=> "-1111011"
sprintf("%b", -123)  #=> "..10000101"
sprintf("%#b", -123) #=> "0b..10000101"
sprintf("%#b", 0)    #=> "0"

# `#' for `B' uses the prefix `0B'.
sprintf("%B", 123)  #=> "1111011"
sprintf("%#B", 123) #=> "0B1111011"

# `#' for `e' forces to show the decimal point.
sprintf("%.0e", 1)  #=> "1e+00"
sprintf("%#.0e", 1) #=> "1.e+00"

# `#' for `f' forces to show the decimal point.
sprintf("%.0f", 1234)  #=> "1234"
sprintf("%#.0f", 1234) #=> "1234."

# `#' for `g' forces to show the decimal point.
# It also disables stripping lowest zeros.
sprintf("%g", 123.4)   #=> "123.4"
sprintf("%#g", 123.4)  #=> "123.400"
sprintf("%g", 123456)  #=> "123456"
sprintf("%#g", 123456) #=> "123456."

The field width is an optional integer, followed optionally by a period and a precision. The width specifies the minimum number of characters that will be written to the result for this field.

Examples of width:

# padding is done by spaces,       width=20
# 0 or radix-1.             <------------------>
sprintf("%20d", 123)   #=> "                 123"
sprintf("%+20d", 123)  #=> "                +123"
sprintf("%020d", 123)  #=> "00000000000000000123"
sprintf("%+020d", 123) #=> "+0000000000000000123"
sprintf("% 020d", 123) #=> " 0000000000000000123"
sprintf("%-20d", 123)  #=> "123                 "
sprintf("%-+20d", 123) #=> "+123                "
sprintf("%- 20d", 123) #=> " 123                "
sprintf("%020x", -123) #=> "..ffffffffffffffff85"

For numeric fields, the precision controls the number of decimal places displayed. For string fields, the precision determines the maximum number of characters to be copied from the string. (Thus, the format sequence %10.10s will always contribute exactly ten characters to the result.)

Examples of precisions:

# precision for `d', 'o', 'x' and 'b' is
# minimum number of digits               <------>
sprintf("%20.8d", 123)  #=> "            00000123"
sprintf("%20.8o", 123)  #=> "            00000173"
sprintf("%20.8x", 123)  #=> "            0000007b"
sprintf("%20.8b", 123)  #=> "            01111011"
sprintf("%20.8d", -123) #=> "           -00000123"
sprintf("%20.8o", -123) #=> "            ..777605"
sprintf("%20.8x", -123) #=> "            ..ffff85"
sprintf("%20.8b", -11)  #=> "            ..110101"

# "0x" and "0b" for `#x' and `#b' is not counted for
# precision but "0" for `#o' is counted.  <------>
sprintf("%#20.8d", 123)  #=> "            00000123"
sprintf("%#20.8o", 123)  #=> "            00000173"
sprintf("%#20.8x", 123)  #=> "          0x0000007b"
sprintf("%#20.8b", 123)  #=> "          0b01111011"
sprintf("%#20.8d", -123) #=> "           -00000123"
sprintf("%#20.8o", -123) #=> "            ..777605"
sprintf("%#20.8x", -123) #=> "          0x..ffff85"
sprintf("%#20.8b", -11)  #=> "          0b..110101"

# precision for `e' is number of
# digits after the decimal point           <------>
sprintf("%20.8e", 1234.56789) #=> "      1.23456789e+03"

# precision for `f' is number of
# digits after the decimal point               <------>
sprintf("%20.8f", 1234.56789) #=> "       1234.56789000"

# precision for `g' is number of
# significant digits                          <------->
sprintf("%20.8g", 1234.56789) #=> "           1234.5679"

#                                         <------->
sprintf("%20.8g", 123456789)  #=> "       1.2345679e+08"

# precision for `s' is
# maximum number of characters                    <------>
sprintf("%20.8s", "string test") #=> "            string t"

Examples:

sprintf("%d %04x", 123, 123)               #=> "123 007b"
sprintf("%08b '%4s'", 123, 123)            #=> "01111011 ' 123'"
sprintf("%1$*2$s %2$d %1$s", "hello", 8)   #=> "   hello 8 hello"
sprintf("%1$*2$s %2$d", "hello", -8)       #=> "hello    -8"
sprintf("%+g:% g:%-g", 1.23, 1.23, 1.23)   #=> "+1.23: 1.23:1.23"
sprintf("%u", -123)                        #=> "-123"

For more complex formatting, Ruby supports a reference by name. %<name>s style uses format style, but %{name} style doesn't.

Examples:

sprintf("%<foo>d : %<bar>f", { :foo => 1, :bar => 2 })
  #=> 1 : 2.000000
sprintf("%{foo}f", { :foo => 1 })
  # => "1f"
srand(number = Random.new_seed) → old_seed Show source
static VALUE
rb_f_srand(int argc, VALUE *argv, VALUE obj)
{
    VALUE seed, old;
    rb_random_t *r = &default_rand;

    if (argc == 0) {
        seed = random_seed();
    }
    else {
        rb_scan_args(argc, argv, "01", &seed);
    }
    old = r->seed;
    r->seed = rand_init(&r->mt, seed);

    return old;
}

Seeds the system pseudo-random number generator, Random::DEFAULT, with number. The previous seed value is returned.

If number is omitted, seeds the generator using a source of entropy provided by the operating system, if available (/dev/urandom on Unix systems or the RSA cryptographic provider on Windows), which is then combined with the time, the process id, and a sequence number.

srand may be used to ensure repeatable sequences of pseudo-random numbers between different runs of the program. By setting the seed to a known value, programs can be made deterministic during testing.

srand 1234               # => 268519324636777531569100071560086917274
[ rand, rand ]           # => [0.1915194503788923, 0.6221087710398319]
[ rand(10), rand(1000) ] # => [4, 664]
srand 1234               # => 1234
[ rand, rand ]           # => [0.1915194503788923, 0.6221087710398319]
sub(pattern, replacement) → $_ Show source
sub(pattern) {|...| block } → $_
static VALUE
rb_f_sub(int argc, VALUE *argv)
{
    VALUE str = rb_funcall_passing_block(uscore_get(), rb_intern("sub"), argc, argv);
    rb_lastline_set(str);
    return str;
}

Equivalent to $_.sub(args), except that $_ will be updated if substitution occurs. Available only when -p/-n command line option specified.

syscall(num [, args...]) → integer Show source
static VALUE
rb_f_syscall(int argc, VALUE *argv)
{
#ifdef atarist
    VALUE arg[13]; /* yes, we really need that many ! */
#else
    VALUE arg[8];
#endif
#if SIZEOF_VOIDP == 8 && defined(HAVE___SYSCALL) && SIZEOF_INT != 8 /* mainly *BSD */
# define SYSCALL __syscall
# define NUM2SYSCALLID(x) NUM2LONG(x)
# define RETVAL2NUM(x) LONG2NUM(x)
# if SIZEOF_LONG == 8
    long num, retval = -1;
# elif SIZEOF_LONG_LONG == 8
    long long num, retval = -1;
# else
#  error ---->> it is asserted that __syscall takes the first argument and returns retval in 64bit signed integer. <<----
# endif
#elif defined(__linux__)
# define SYSCALL syscall
# define NUM2SYSCALLID(x) NUM2LONG(x)
# define RETVAL2NUM(x) LONG2NUM(x)
    /*
     * Linux man page says, syscall(2) function prototype is below.
     *
     *     int syscall(int number, ...);
     *
     * But, it's incorrect. Actual one takes and returned long. (see unistd.h)
     */
    long num, retval = -1;
#else
# define SYSCALL syscall
# define NUM2SYSCALLID(x) NUM2INT(x)
# define RETVAL2NUM(x) INT2NUM(x)
    int num, retval = -1;
#endif
    int i;

    if (RTEST(ruby_verbose)) {
        rb_warning("We plan to remove a syscall function at future release. DL(Fiddle) provides safer alternative.");
    }

    rb_secure(2);
    if (argc == 0)
        rb_raise(rb_eArgError, "too few arguments for syscall");
    if (argc > numberof(arg))
        rb_raise(rb_eArgError, "too many arguments for syscall");
    num = NUM2SYSCALLID(argv[0]); ++argv;
    for (i = argc - 1; i--; ) {
        VALUE v = rb_check_string_type(argv[i]);

        if (!NIL_P(v)) {
            SafeStringValue(v);
            rb_str_modify(v);
            arg[i] = (VALUE)StringValueCStr(v);
        }
        else {
            arg[i] = (VALUE)NUM2LONG(argv[i]);
        }
    }

    switch (argc) {
      case 1:
        retval = SYSCALL(num);
        break;
      case 2:
        retval = SYSCALL(num, arg[0]);
        break;
      case 3:
        retval = SYSCALL(num, arg[0],arg[1]);
        break;
      case 4:
        retval = SYSCALL(num, arg[0],arg[1],arg[2]);
        break;
      case 5:
        retval = SYSCALL(num, arg[0],arg[1],arg[2],arg[3]);
        break;
      case 6:
        retval = SYSCALL(num, arg[0],arg[1],arg[2],arg[3],arg[4]);
        break;
      case 7:
        retval = SYSCALL(num, arg[0],arg[1],arg[2],arg[3],arg[4],arg[5]);
        break;
      case 8:
        retval = SYSCALL(num, arg[0],arg[1],arg[2],arg[3],arg[4],arg[5],arg[6]);
        break;
#ifdef atarist
      case 9:
        retval = SYSCALL(num, arg[0],arg[1],arg[2],arg[3],arg[4],arg[5],arg[6],
          arg[7]);
        break;
      case 10:
        retval = SYSCALL(num, arg[0],arg[1],arg[2],arg[3],arg[4],arg[5],arg[6],
          arg[7], arg[8]);
        break;
      case 11:
        retval = SYSCALL(num, arg[0],arg[1],arg[2],arg[3],arg[4],arg[5],arg[6],
          arg[7], arg[8], arg[9]);
        break;
      case 12:
        retval = SYSCALL(num, arg[0],arg[1],arg[2],arg[3],arg[4],arg[5],arg[6],
          arg[7], arg[8], arg[9], arg[10]);
        break;
      case 13:
        retval = SYSCALL(num, arg[0],arg[1],arg[2],arg[3],arg[4],arg[5],arg[6],
          arg[7], arg[8], arg[9], arg[10], arg[11]);
        break;
      case 14:
        retval = SYSCALL(num, arg[0],arg[1],arg[2],arg[3],arg[4],arg[5],arg[6],
          arg[7], arg[8], arg[9], arg[10], arg[11], arg[12]);
        break;
#endif
    }

    if (retval == -1)
        rb_sys_fail(0);
    return RETVAL2NUM(retval);
#undef SYSCALL
#undef NUM2SYSCALLID
#undef RETVAL2NUM
}

Calls the operating system function identified by num and returns the result of the function or raises SystemCallError if it failed.

Arguments for the function can follow num. They must be either String objects or Integer objects. A String object is passed as a pointer to the byte sequence. An Integer object is passed as an integer whose bit size is same as a pointer. Up to nine parameters may be passed (14 on the Atari-ST).

The function identified by num is system dependent. On some Unix systems, the numbers may be obtained from a header file called syscall.h.

syscall 4, 1, "hello\n", 6   # '4' is write(2) on our box

produces:

hello

Calling syscall on a platform which does not have any way to an arbitrary system function just fails with NotImplementedError.

Note: syscall is essentially unsafe and unportable. Feel free to shoot your foot. The DL (Fiddle) library is preferred for safer and a bit more portable programming.

system([env,] command... [,options]) → true, false or nil Show source
static VALUE
rb_f_system(int argc, VALUE *argv)
{
    rb_pid_t pid;
    int status;

#if defined(SIGCLD) && !defined(SIGCHLD)
# define SIGCHLD SIGCLD
#endif

#ifdef SIGCHLD
    RETSIGTYPE (*chfunc)(int);

    rb_last_status_clear();
    chfunc = signal(SIGCHLD, SIG_DFL);
#endif
    pid = rb_spawn_internal(argc, argv, NULL, 0);
#if defined(HAVE_WORKING_FORK) || defined(HAVE_SPAWNV)
    if (pid > 0) {
        int ret, status;
        ret = rb_waitpid(pid, &status, 0);
        if (ret == (rb_pid_t)-1)
            rb_sys_fail("Another thread waited the process started by system().");
    }
#endif
#ifdef SIGCHLD
    signal(SIGCHLD, chfunc);
#endif
    if (pid < 0) {
        return Qnil;
    }
    status = PST2INT(rb_last_status_get());
    if (status == EXIT_SUCCESS) return Qtrue;
    return Qfalse;
}

Executes command… in a subshell. command… is one of following forms.

commandline                 : command line string which is passed to the standard shell
cmdname, arg1, ...          : command name and one or more arguments (no shell)
[cmdname, argv0], arg1, ... : command name, argv[0] and zero or more arguments (no shell)

system returns true if the command gives zero exit status, false for non zero exit status. Returns nil if command execution fails. An error status is available in $?. The arguments are processed in the same way as for Kernel.spawn.

The hash arguments, env and options, are same as exec and spawn. See Kernel.spawn for details.

system("echo *")
system("echo", "*")

produces:

config.h main.rb
*

See Kernel.exec for the standard shell.

test(cmd, file1 [, file2] ) → obj Show source
static VALUE
rb_f_test(int argc, VALUE *argv)
{
    int cmd;

    if (argc == 0) rb_check_arity(argc, 2, 3);
    cmd = NUM2CHR(argv[0]);
    if (cmd == 0) {
      unknown:
        /* unknown command */
        if (ISPRINT(cmd)) {
            rb_raise(rb_eArgError, "unknown command '%s%c'", cmd == '\'' || cmd == '\\' ? "\\" : "", cmd);
        }
        else {
            rb_raise(rb_eArgError, "unknown command \"\\x%02X\"", cmd);
        }
    }
    if (strchr("bcdefgGkloOprRsSuwWxXz", cmd)) {
        CHECK(1);
        switch (cmd) {
          case 'b':
            return rb_file_blockdev_p(0, argv[1]);

          case 'c':
            return rb_file_chardev_p(0, argv[1]);

          case 'd':
            return rb_file_directory_p(0, argv[1]);

          case 'e':
            return rb_file_exist_p(0, argv[1]);

          case 'f':
            return rb_file_file_p(0, argv[1]);

          case 'g':
            return rb_file_sgid_p(0, argv[1]);

          case 'G':
            return rb_file_grpowned_p(0, argv[1]);

          case 'k':
            return rb_file_sticky_p(0, argv[1]);

          case 'l':
            return rb_file_symlink_p(0, argv[1]);

          case 'o':
            return rb_file_owned_p(0, argv[1]);

          case 'O':
            return rb_file_rowned_p(0, argv[1]);

          case 'p':
            return rb_file_pipe_p(0, argv[1]);

          case 'r':
            return rb_file_readable_p(0, argv[1]);

          case 'R':
            return rb_file_readable_real_p(0, argv[1]);

          case 's':
            return rb_file_size_p(0, argv[1]);

          case 'S':
            return rb_file_socket_p(0, argv[1]);

          case 'u':
            return rb_file_suid_p(0, argv[1]);

          case 'w':
            return rb_file_writable_p(0, argv[1]);

          case 'W':
            return rb_file_writable_real_p(0, argv[1]);

          case 'x':
            return rb_file_executable_p(0, argv[1]);

          case 'X':
            return rb_file_executable_real_p(0, argv[1]);

          case 'z':
            return rb_file_zero_p(0, argv[1]);
        }
    }

    if (strchr("MAC", cmd)) {
        struct stat st;
        VALUE fname = argv[1];

        CHECK(1);
        if (rb_stat(fname, &st) == -1) {
            FilePathValue(fname);
            rb_sys_fail_path(fname);
        }

        switch (cmd) {
          case 'A':
            return stat_atime(&st);
          case 'M':
            return stat_mtime(&st);
          case 'C':
            return stat_ctime(&st);
        }
    }

    if (cmd == '-') {
        CHECK(2);
        return rb_file_identical_p(0, argv[1], argv[2]);
    }

    if (strchr("=<>", cmd)) {
        struct stat st1, st2;

        CHECK(2);
        if (rb_stat(argv[1], &st1) < 0) return Qfalse;
        if (rb_stat(argv[2], &st2) < 0) return Qfalse;

        switch (cmd) {
          case '=':
            if (st1.st_mtime == st2.st_mtime) return Qtrue;
            return Qfalse;

          case '>':
            if (st1.st_mtime > st2.st_mtime) return Qtrue;
            return Qfalse;

          case '<':
            if (st1.st_mtime < st2.st_mtime) return Qtrue;
            return Qfalse;
        }
    }
    goto unknown;
}

Uses the character cmd to perform various tests on file1 (first table below) or on file1 and file2 (second table).

File tests on a single file:

Cmd    Returns   Meaning
"A"  | Time    | Last access time for file1
"b"  | boolean | True if file1 is a block device
"c"  | boolean | True if file1 is a character device
"C"  | Time    | Last change time for file1
"d"  | boolean | True if file1 exists and is a directory
"e"  | boolean | True if file1 exists
"f"  | boolean | True if file1 exists and is a regular file
"g"  | boolean | True if file1 has the \CF{setgid} bit
     |         | set (false under NT)
"G"  | boolean | True if file1 exists and has a group
     |         | ownership equal to the caller's group
"k"  | boolean | True if file1 exists and has the sticky bit set
"l"  | boolean | True if file1 exists and is a symbolic link
"M"  | Time    | Last modification time for file1
"o"  | boolean | True if file1 exists and is owned by
     |         | the caller's effective uid
"O"  | boolean | True if file1 exists and is owned by
     |         | the caller's real uid
"p"  | boolean | True if file1 exists and is a fifo
"r"  | boolean | True if file1 is readable by the effective
     |         | uid/gid of the caller
"R"  | boolean | True if file is readable by the real
     |         | uid/gid of the caller
"s"  | int/nil | If file1 has nonzero size, return the size,
     |         | otherwise return nil
"S"  | boolean | True if file1 exists and is a socket
"u"  | boolean | True if file1 has the setuid bit set
"w"  | boolean | True if file1 exists and is writable by
     |         | the effective uid/gid
"W"  | boolean | True if file1 exists and is writable by
     |         | the real uid/gid
"x"  | boolean | True if file1 exists and is executable by
     |         | the effective uid/gid
"X"  | boolean | True if file1 exists and is executable by
     |         | the real uid/gid
"z"  | boolean | True if file1 exists and has a zero length

Tests that take two files:

"-"  | boolean | True if file1 and file2 are identical
"="  | boolean | True if the modification times of file1
     |         | and file2 are equal
"<"  | boolean | True if the modification time of file1
     |         | is prior to that of file2
">"  | boolean | True if the modification time of file1
     |         | is after that of file2
throw(tag [, obj]) Show source
static VALUE
rb_f_throw(int argc, VALUE *argv)
{
    VALUE tag, value;

    rb_scan_args(argc, argv, "11", &tag, &value);
    rb_throw_obj(tag, value);
    UNREACHABLE;
}

Transfers control to the end of the active catch block waiting for tag. Raises UncaughtThrowError if there is no catch block for the tag. The optional second parameter supplies a return value for the catch block, which otherwise defaults to nil. For examples, see Kernel::catch.

trace_var(symbol, cmd ) → nil Show source
trace_var(symbol) {|val| block } → nil
VALUE
rb_f_trace_var(int argc, const VALUE *argv)
{
    VALUE var, cmd;
    struct global_entry *entry;
    struct trace_var *trace;

    if (rb_scan_args(argc, argv, "11", &var, &cmd) == 1) {
	cmd = rb_block_proc();
    }
    if (NIL_P(cmd)) {
	return rb_f_untrace_var(argc, argv);
    }
    entry = rb_global_entry(rb_to_id(var));
    if (OBJ_TAINTED(cmd)) {
	rb_raise(rb_eSecurityError, "Insecure: tainted variable trace");
    }
    trace = ALLOC(struct trace_var);
    trace->next = entry->var->trace;
    trace->func = rb_trace_eval;
    trace->data = cmd;
    trace->removed = 0;
    entry->var->trace = trace;

    return Qnil;
}

Controls tracing of assignments to global variables. The parameter symbol identifies the variable (as either a string name or a symbol identifier). cmd (which may be a string or a Proc object) or block is executed whenever the variable is assigned. The block or Proc object receives the variable's new value as a parameter. Also see Kernel::untrace_var.

trace_var :$_, proc {|v| puts "$_ is now '#{v}'" }
$_ = "hello"
$_ = ' there'

produces:

$_ is now 'hello'
$_ is now ' there'
trap( signal, command ) → obj Show source
trap( signal ) {| | block } → obj
static VALUE
sig_trap(int argc, VALUE *argv)
{
    int sig;
    sighandler_t func;
    VALUE cmd;

    rb_secure(2);
    rb_check_arity(argc, 1, 2);

    sig = trap_signm(argv[0]);
    if (reserved_signal_p(sig)) {
        const char *name = signo2signm(sig);
        if (name)
            rb_raise(rb_eArgError, "can't trap reserved signal: SIG%s", name);
        else
            rb_raise(rb_eArgError, "can't trap reserved signal: %d", sig);
    }

    if (argc == 1) {
        cmd = rb_block_proc();
        func = sighandler;
    }
    else {
        cmd = argv[1];
        func = trap_handler(&cmd, sig);
    }

    if (OBJ_TAINTED(cmd)) {
        rb_raise(rb_eSecurityError, "Insecure: tainted signal trap");
    }

    return trap(sig, func, cmd);
}

Specifies the handling of signals. The first parameter is a signal name (a string such as “SIGALRM'', “SIGUSR1'', and so on) or a signal number. The characters “SIG'' may be omitted from the signal name. The command or block specifies code to be run when the signal is raised. If the command is the string “IGNORE'' or “SIG_IGN'', the signal will be ignored. If the command is “DEFAULT'' or “SIG_DFL'', the Ruby's default handler will be invoked. If the command is “EXIT'', the script will be terminated by the signal. If the command is “SYSTEM_DEFAULT'', the operating system's default handler will be invoked. Otherwise, the given command or block will be run. The special signal name “EXIT'' or signal number zero will be invoked just prior to program termination. trap returns the previous handler for the given signal.

Signal.trap(0, proc { puts "Terminating: #{$$}" })
Signal.trap("CLD")  { puts "Child died" }
fork && Process.wait

produces:

Terminating: 27461
Child died
Terminating: 27460
untrace_var(symbol [, cmd] ) → array or nil Show source
VALUE
rb_f_untrace_var(int argc, const VALUE *argv)
{
    VALUE var, cmd;
    ID id;
    struct global_entry *entry;
    struct trace_var *trace;
    st_data_t data;

    rb_scan_args(argc, argv, "11", &var, &cmd);
    id = rb_check_id(&var);
    if (!id) {
	rb_name_error_str(var, "undefined global variable %"PRIsVALUE"", QUOTE(var));
    }
    if (!st_lookup(rb_global_tbl, (st_data_t)id, &data)) {
	rb_name_error(id, "undefined global variable %"PRIsVALUE"", QUOTE_ID(id));
    }

    trace = (entry = (struct global_entry *)data)->var->trace;
    if (NIL_P(cmd)) {
	VALUE ary = rb_ary_new();

	while (trace) {
	    struct trace_var *next = trace->next;
	    rb_ary_push(ary, (VALUE)trace->data);
	    trace->removed = 1;
	    trace = next;
	}

	if (!entry->var->block_trace) remove_trace(entry->var);
	return ary;
    }
    else {
	while (trace) {
	    if (trace->data == cmd) {
		trace->removed = 1;
		if (!entry->var->block_trace) remove_trace(entry->var);
		return rb_ary_new3(1, cmd);
	    }
	    trace = trace->next;
	}
    }
    return Qnil;
}

Removes tracing for the specified command on the given global variable and returns nil. If no command is specified, removes all tracing for that variable and returns an array containing the commands actually removed.

warn(msg, ...) → nil Show source
static VALUE
rb_warn_m(int argc, VALUE *argv, VALUE exc)
{
    if (!NIL_P(ruby_verbose) && argc > 0) {
        rb_io_puts(argc, argv, rb_stderr);
    }
    return Qnil;
}

Displays each of the given messages followed by a record separator on STDERR unless warnings have been disabled (for example with the -W0 flag).

  warn("warning 1", "warning 2")

<em>produces:</em>

  warning 1
  warning 2

Private Instance Methods

JSON(object, *args) Show source
# File ext/json/lib/json/common.rb, line 466
def JSON(object, *args)
  if object.respond_to? :to_str
    JSON.parse(object.to_str, args.first)
  else
    JSON.generate(object, args.first)
  end
end

If object is string-like, parse the string and return the parsed result as a Ruby data structure. Otherwise, generate a JSON text from the Ruby data structure object and return it.

The opts argument is passed through to generate/parse respectively. See generate and parse for their documentation.

URI(uri) Show source
# File lib/uri/common.rb, line 709
def URI(uri)
  if uri.is_a?(URI::Generic)
    uri
  elsif uri = String.try_convert(uri)
    URI.parse(uri)
  else
    raise ArgumentError,
      "bad argument (expected URI object or URI string)"
  end
end

Returns uri converted to a URI object.

gem(gem_name, *requirements) Show source
# File lib/rubygems/core_ext/kernel_gem.rb, line 43
def gem(gem_name, *requirements) # :doc:
  skip_list = (ENV['GEM_SKIP'] || "").split(/:/)
  raise Gem::LoadError, "skipping #{gem_name}" if skip_list.include? gem_name

  if gem_name.kind_of? Gem::Dependency
    unless Gem::Deprecate.skip
      warn "#{Gem.location_of_caller.join ':'}:Warning: Kernel.gem no longer "           "accepts a Gem::Dependency object, please pass the name "           "and requirements directly"
    end

    requirements = gem_name.requirement
    gem_name = gem_name.name
  end

  dep = Gem::Dependency.new(gem_name, *requirements)

  loaded = Gem.loaded_specs[gem_name]

  return false if loaded && dep.matches_spec?(loaded)

  spec = dep.to_spec

  Gem::LOADED_SPECS_MUTEX.synchronize {
    spec.activate
  } if spec
end

Use #gem to activate a specific version of gem_name.

requirements is a list of version requirements that the specified gem must match, most commonly “= example.version.number”. See Gem::Requirement for how to specify a version requirement.

If you will be activating the latest version of a gem, there is no need to call #gem, #require will do the right thing for you.

#gem returns true if the gem was activated, otherwise false. If the gem could not be found, didn't match the version requirements, or a different version was already activated, an exception will be raised.

#gem should be called before any require statements (otherwise RubyGems may load a conflicting library version).

#gem only loads prerelease versions when prerelease requirements are given:

gem 'rake', '>= 1.1.a', '< 2'

In older RubyGems versions, the environment variable GEM_SKIP could be used to skip activation of specified gems, for example to test out changes that haven't been installed yet. Now RubyGems defers to -I and the RUBYLIB environment variable to skip activation of a gem.

Example:

GEM_SKIP=libA:libB ruby -I../libA -I../libB ./mycode.rb
j(*objs) Show source
# File ext/json/lib/json/common.rb, line 444
def j(*objs)
  objs.each do |obj|
    puts JSON::generate(obj, :allow_nan => true, :max_nesting => false)
  end
  nil
end

Outputs objs to STDOUT as JSON strings in the shortest form, that is in one line.

jj(*objs) Show source
# File ext/json/lib/json/common.rb, line 453
def jj(*objs)
  objs.each do |obj|
    puts JSON::pretty_generate(obj, :allow_nan => true, :max_nesting => false)
  end
  nil
end

Outputs objs to STDOUT as JSON strings in a pretty format, with indentation and over many lines.

open(path [, mode [, perm]] [, opt]) → io or nil Show source
open(path [, mode [, perm]] [, opt]) {|io| block } → obj
static VALUE
rb_f_open(int argc, VALUE *argv)
{
    ID to_open = 0;
    int redirect = FALSE;

    if (argc >= 1) {
        CONST_ID(to_open, "to_open");
        if (rb_respond_to(argv[0], to_open)) {
            redirect = TRUE;
        }
        else {
            VALUE tmp = argv[0];
            FilePathValue(tmp);
            if (NIL_P(tmp)) {
                redirect = TRUE;
            }
            else {
                VALUE cmd = check_pipe_command(tmp);
                if (!NIL_P(cmd)) {
                    argv[0] = cmd;
                    return rb_io_s_popen(argc, argv, rb_cIO);
                }
            }
        }
    }
    if (redirect) {
        VALUE io = rb_funcall2(argv[0], to_open, argc-1, argv+1);

        if (rb_block_given_p()) {
            return rb_ensure(rb_yield, io, io_close, io);
        }
        return io;
    }
    return rb_io_s_open(argc, argv, rb_cFile);
}

Creates an IO object connected to the given stream, file, or subprocess.

If path does not start with a pipe character (|), treat it as the name of a file to open using the specified mode (defaulting to “r”).

The mode is either a string or an integer. If it is an integer, it must be bitwise-or of open(2) flags, such as File::RDWR or File::EXCL. If it is a string, it is either “fmode”, “fmode:ext_enc”, or “fmode:ext_enc:int_enc”.

See the documentation of IO.new for full documentation of the mode string directives.

If a file is being created, its initial permissions may be set using the perm parameter. See File.new and the open(2) and chmod(2) man pages for a description of permissions.

If a block is specified, it will be invoked with the IO object as a parameter, and the IO will be automatically closed when the block terminates. The call returns the value of the block.

If path starts with a pipe character ("|"), a subprocess is created, connected to the caller by a pair of pipes. The returned IO object may be used to write to the standard input and read from the standard output of this subprocess.

If the command following the pipe is a single minus sign ("|-"), Ruby forks, and this subprocess is connected to the parent. If the command is not "-", the subprocess runs the command.

When the subprocess is Ruby (opened via "|-"), the open call returns nil. If a block is associated with the open call, that block will run twice — once in the parent and once in the child.

The block parameter will be an IO object in the parent and nil in the child. The parent's IO object will be connected to the child's $stdin and $stdout. The subprocess will be terminated at the end of the block.

Examples

Reading from “testfile”:

open("testfile") do |f|
  print f.gets
end

Produces:

This is line one

Open a subprocess and read its output:

cmd = open("|date")
print cmd.gets
cmd.close

Produces:

Wed Apr  9 08:56:31 CDT 2003

Open a subprocess running the same Ruby program:

f = open("|-", "w+")
if f.nil?
  puts "in Child"
  exit
else
  puts "Got: #{f.gets}"
end

Produces:

Got: in Child

Open a subprocess using a block to receive the IO object:

open "|-" do |f|
  if f then
    # parent process
    puts "Got: #{f.gets}"
  else
    # child process
    puts "in Child"
  end
end

Produces:

Got: in Child
open_uri_original_open(*args)
Alias for: open
require(path) Show source
# File lib/rubygems/core_ext/kernel_require.rb, line 38
def require path
  RUBYGEMS_ACTIVATION_MONITOR.enter

  path = path.to_path if path.respond_to? :to_path

  spec = Gem.find_unresolved_default_spec(path)
  if spec
    Gem.remove_unresolved_default_spec(spec)
    gem(spec.name)
  end

  # If there are no unresolved deps, then we can use just try
  # normal require handle loading a gem from the rescue below.

  if Gem::Specification.unresolved_deps.empty? then
    RUBYGEMS_ACTIVATION_MONITOR.exit
    return gem_original_require(path)
  end

  # If +path+ is for a gem that has already been loaded, don't
  # bother trying to find it in an unresolved gem, just go straight
  # to normal require.
  #--
  # TODO request access to the C implementation of this to speed up RubyGems

  spec = Gem::Specification.stubs.find { |s|
    s.activated? and s.contains_requirable_file? path
  }

  begin
    RUBYGEMS_ACTIVATION_MONITOR.exit
    return gem_original_require(spec.to_fullpath(path) || path)
  end if spec

  # Attempt to find +path+ in any unresolved gems...

  found_specs = Gem::Specification.find_in_unresolved path

  # If there are no directly unresolved gems, then try and find +path+
  # in any gems that are available via the currently unresolved gems.
  # For example, given:
  #
  #   a => b => c => d
  #
  # If a and b are currently active with c being unresolved and d.rb is
  # requested, then find_in_unresolved_tree will find d.rb in d because
  # it's a dependency of c.
  #
  if found_specs.empty? then
    found_specs = Gem::Specification.find_in_unresolved_tree path

    found_specs.each do |found_spec|
      found_spec.activate
    end

  # We found +path+ directly in an unresolved gem. Now we figure out, of
  # the possible found specs, which one we should activate.
  else

    # Check that all the found specs are just different
    # versions of the same gem
    names = found_specs.map(&:name).uniq

    if names.size > 1 then
      RUBYGEMS_ACTIVATION_MONITOR.exit
      raise Gem::LoadError, "#{path} found in multiple gems: #{names.join ', '}"
    end

    # Ok, now find a gem that has no conflicts, starting
    # at the highest version.
    valid = found_specs.select { |s| s.conflicts.empty? }.last

    unless valid then
      le = Gem::LoadError.new "unable to find a version of '#{names.first}' to activate"
      le.name = names.first
      RUBYGEMS_ACTIVATION_MONITOR.exit
      raise le
    end

    valid.activate
  end

  RUBYGEMS_ACTIVATION_MONITOR.exit
  return gem_original_require(path)
rescue LoadError => load_error
  RUBYGEMS_ACTIVATION_MONITOR.enter

  if load_error.message.start_with?("Could not find") or
      (load_error.message.end_with?(path) and Gem.try_activate(path)) then
    RUBYGEMS_ACTIVATION_MONITOR.exit
    return gem_original_require(path)
  else
    RUBYGEMS_ACTIVATION_MONITOR.exit
  end

  raise load_error
end

When RubyGems is required, #require is replaced with our own which is capable of loading gems on demand.

When you call require 'x', this is what happens:

  • If the file can be loaded from the existing Ruby loadpath, it is.

  • Otherwise, installed gems are searched for a file that matches. If it's found in gem 'y', that gem is activated (added to the loadpath).

The normal require functionality of returning false if that file has already been loaded is preserved.

Also aliased as: gem_original_require
scanf(format, &b) Show source
# File lib/scanf.rb, line 773
def scanf(format, &b) #:doc:
  STDIN.scanf(format ,&b)
end

Scans STDIN for data matching format. See IO#scanf for details.

See Scanf for details on creating a format string.

You will need to require 'scanf' to use #scanf.

y(*objects) Show source
# File ext/psych/lib/psych/y.rb, line 4
def y *objects
  puts Psych.dump_stream(*objects)
end

An alias for Psych.dump_stream meant to be used with IRB.

Ruby Core © 1993–2017 Yukihiro Matsumoto
Licensed under the Ruby License.
Ruby Standard Library © contributors
Licensed under their own licenses.