ansible.builtin.dnf – Manages packages with the dnf package manager

Note

This module is part of ansible-base and included in all Ansible installations. In most cases, you can use the short module name dnf even without specifying the collections: keyword. Despite that, we recommend you use the FQCN for easy linking to the module documentation and to avoid conflicting with other collections that may have the same module name.

New in version 1.9: of ansible.builtin

Synopsis

  • Installs, upgrade, removes, and lists packages and groups with the dnf package manager.

Requirements

The below requirements are needed on the host that executes this module.

  • python >= 2.6
  • python-dnf
  • for the autoremove option you need dnf >= 2.0.1”

Parameters

Parameter Choices/Defaults Comments
allow_downgrade
boolean
added in 2.7 of ansible.builtin
    Choices:
  • no
  • yes
Specify if the named package and version is allowed to downgrade a maybe already installed higher version of that package. Note that setting allow_downgrade=True can make this module behave in a non-idempotent way. The task could end up with a set of packages that does not match the complete list of specified packages to install (because dependencies between the downgraded package and others can cause changes to the packages which were in the earlier transaction).
allowerasing
boolean
added in 2.10 of ansible.builtin
    Choices:
  • no
  • yes
If yes it allows erasing of installed packages to resolve dependencies.
autoremove
boolean
added in 2.4 of ansible.builtin
    Choices:
  • no
  • yes
If yes, removes all "leaf" packages from the system that were originally installed as dependencies of user-installed packages but which are no longer required by any such package. Should be used alone or when state is absent
bugfix
boolean
added in 2.7 of ansible.builtin
    Choices:
  • no
  • yes
If set to yes, and state=latest then only installs updates that have been marked bugfix related.
Note that, similar to ``dnf upgrade-minimal``, this filter applies to dependencies as well.
conf_file
string
The remote dnf configuration file to use for the transaction.
disable_excludes
string
added in 2.7 of ansible.builtin
Disable the excludes defined in DNF config files.
If set to all, disables all excludes.
If set to main, disable excludes defined in [main] in dnf.conf.
If set to repoid, disable excludes defined for given repo id.
disable_gpg_check
boolean
    Choices:
  • no
  • yes
Whether to disable the GPG checking of signatures of packages being installed. Has an effect only if state is present or latest.
This setting affects packages installed from a repository as well as "local" packages installed from the filesystem or a URL.
disable_plugin
list / elements=string
added in 2.7 of ansible.builtin
Plugin name to disable for the install/update operation. The disabled plugins will not persist beyond the transaction.
disablerepo
list / elements=string
Repoid of repositories to disable for the install/update operation. These repos will not persist beyond the transaction. When specifying multiple repos, separate them with a ",".
download_dir
string
added in 2.8 of ansible.builtin
Specifies an alternate directory to store packages.
Has an effect only if download_only is specified.
download_only
boolean
added in 2.7 of ansible.builtin
    Choices:
  • no
  • yes
Only download the packages, do not install them.
enable_plugin
list / elements=string
added in 2.7 of ansible.builtin
Plugin name to enable for the install/update operation. The enabled plugin will not persist beyond the transaction.
enablerepo
list / elements=string
Repoid of repositories to enable for the install/update operation. These repos will not persist beyond the transaction. When specifying multiple repos, separate them with a ",".
exclude
list / elements=string
added in 2.7 of ansible.builtin
Package name(s) to exclude when state=present, or latest. This can be a list or a comma separated string.
install_repoquery
boolean
added in 2.7 of ansible.builtin
    Choices:
  • no
  • yes
This is effectively a no-op in DNF as it is not needed with DNF, but is an accepted parameter for feature parity/compatibility with the yum module.
install_weak_deps
boolean
added in 2.8 of ansible.builtin
    Choices:
  • no
  • yes
Will also install all packages linked by a weak dependency relation.
installroot
string
added in 2.3 of ansible.builtin
Default:
"/"
Specifies an alternative installroot, relative to which all packages will be installed.
list
string
Various (non-idempotent) commands for usage with /usr/bin/ansible and not playbooks. See examples.
lock_timeout
integer
added in 2.8 of ansible.builtin
Default:
30
Amount of time to wait for the dnf lockfile to be freed.
name
list / elements=string / required
A package name or package specifier with version, like name-1.0. When using state=latest, this can be '*' which means run: dnf -y update. You can also pass a url or a local path to a rpm file. To operate on several packages this can accept a comma separated string of packages or a list of packages.
Comparison operators for package version are valid here >, <, >=, <=. Example - name>=1.0

aliases: pkg
nobest
boolean
added in 2.11 of ansible.builtin
    Choices:
  • no
  • yes
Set best option to False, so that transactions are not limited to best candidates only.
releasever
string
added in 2.6 of ansible.builtin
Specifies an alternative release from which all packages will be installed.
security
boolean
added in 2.7 of ansible.builtin
    Choices:
  • no
  • yes
If set to yes, and state=latest then only installs updates that have been marked security related.
Note that, similar to ``dnf upgrade-minimal``, this filter applies to dependencies as well.
skip_broken
boolean
added in 2.7 of ansible.builtin
    Choices:
  • no
  • yes
Skip packages with broken dependencies(devsolve) and are causing problems.
state
string
    Choices:
  • absent
  • present
  • installed
  • removed
  • latest
Whether to install (present, latest), or remove (absent) a package.
Default is None, however in effect the default action is present unless the autoremove option is enabled for this module, then absent is inferred.
update_cache
boolean
added in 2.7 of ansible.builtin
    Choices:
  • no
  • yes
Force dnf to check if cache is out of date and redownload if needed. Has an effect only if state is present or latest.

aliases: expire-cache
update_only
boolean
added in 2.7 of ansible.builtin
    Choices:
  • no
  • yes
When using latest, only update installed packages. Do not install packages.
Has an effect only if state is latest
validate_certs
boolean
added in 2.7 of ansible.builtin
    Choices:
  • no
  • yes
This only applies if using a https url as the source of the rpm. e.g. for localinstall. If set to no, the SSL certificates will not be validated.
This should only set to no used on personally controlled sites using self-signed certificates as it avoids verifying the source site.

Notes

Note

  • When used with a loop: each package will be processed individually, it is much more efficient to pass the list directly to the name option.
  • Group removal doesn’t work if the group was installed with Ansible because upstream dnf’s API doesn’t properly mark groups as installed, therefore upon removal the module is unable to detect that the group is installed (https://bugzilla.redhat.com/show_bug.cgi?id=1620324)

Examples

- name: Install the latest version of Apache
  dnf:
    name: httpd
    state: latest

- name: Install Apache >= 2.4
  dnf:
    name: httpd>=2.4
    state: present

- name: Install the latest version of Apache and MariaDB
  dnf:
    name:
      - httpd
      - mariadb-server
    state: latest

- name: Remove the Apache package
  dnf:
    name: httpd
    state: absent

- name: Install the latest version of Apache from the testing repo
  dnf:
    name: httpd
    enablerepo: testing
    state: present

- name: Upgrade all packages
  dnf:
    name: "*"
    state: latest

- name: Install the nginx rpm from a remote repo
  dnf:
    name: 'http://nginx.org/packages/centos/6/noarch/RPMS/nginx-release-centos-6-0.el6.ngx.noarch.rpm'
    state: present

- name: Install nginx rpm from a local file
  dnf:
    name: /usr/local/src/nginx-release-centos-6-0.el6.ngx.noarch.rpm
    state: present

- name: Install the 'Development tools' package group
  dnf:
    name: '@Development tools'
    state: present

- name: Autoremove unneeded packages installed as dependencies
  dnf:
    autoremove: yes

- name: Uninstall httpd but keep its dependencies
  dnf:
    name: httpd
    state: absent
    autoremove: no

- name: Install a modularity appstream with defined stream and profile
  dnf:
    name: '@postgresql:9.6/client'
    state: present

- name: Install a modularity appstream with defined stream
  dnf:
    name: '@postgresql:9.6'
    state: present

- name: Install a modularity appstream with defined profile
  dnf:
    name: '@postgresql/client'
    state: present

Authors

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/ansible/builtin/dnf_module.html