cisco.iosxr.iosxr_lldp_interfaces – LLDP interfaces resource module

Note

This plugin is part of the cisco.iosxr collection (version 1.2.1).

To install it use: ansible-galaxy collection install cisco.iosxr.

To use it in a playbook, specify: cisco.iosxr.iosxr_lldp_interfaces.

New in version 1.0.0: of cisco.iosxr

Synopsis
Parameters
Notes
Examples
Return Values

Synopsis

This module manages Link Layer Discovery Protocol (LLDP) attributes of interfaces on IOS-XR devices.

Note

This module has a corresponding action plugin.

Parameters

Parameter			Choices/Defaults	Comments
config list / elements=dictionary				A dictionary of LLDP interfaces options.
	destination dictionary			Specifies LLDP destination configuration on the interface.
		mac_address string	Choices: ieee-nearest-bridge ieee-nearest-non-tmpr-bridge	Specifies the LLDP destination mac address on the interface.
	name string			Name/Identifier of the interface or Ether-Bundle.
	receive boolean		Choices: no yes	Enable/disable LLDP RX on an interface.
	transmit boolean		Choices: no yes	Enable/disable LLDP TX on an interface.
running_config string				This option is used only with state parsed. The value of this option should be the output received from the IOS-XR device by executing the command show running-config int. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state string			Choices: merged ← replaced overridden deleted parsed rendered gathered	The state of the configuration after module completion.

Notes

Note

Tested against IOS-XR 6.1.3.
This module works with connection network_cli. See the IOS-XR Platform Options.

Examples

# Using merged
#
#
# ------------
# Before state
# ------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 12:40:23.104 UTC
# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
# !
# interface preconfigure GigabitEthernet0/0/0/2
# !
#
#

- name: Merge provided configuration with running configuration
  cisco.iosxr.iosxr_lldp_interfaces:
    config:
    - name: GigabitEthernet0/0/0/1
      destination:
        mac_address: ieee-nearest-non-tmpr-bridge
      transmit: false

    - name: GigabitEthernet0/0/0/2
      destination:
        mac_address: ieee-nearest-bridge
      receive: false
    state: merged

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#
# "before": [
#        {
#            "name": "TenGigE0/0/0/0"
#        },
#        {
#            "name": "GigabitEthernet0/0/0/1"
#        },
#        {
#            "name": "GigabitEthernet0/0/0/2"
#        }
# ]
#
# "commands": [
#        "interface GigabitEthernet0/0/0/2",
#        "lldp destination mac-address ieee-nearest-non-tmpr-bridge",
#        "lldp transmit disable",
#        "interface GigabitEthernet0/0/0/1",
#        "lldp receive disable",
#        "lldp destination mac-address ieee-nearest-bridge"
# ]
#
# "after": [
#        {
#            "name": "TenGigE0/0/0/0"
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/1",
#            "receive": false
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-non-tmpr-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/2",
#            "transmit": false
#        }
# ]
#
#
# ------------
# After state
# ------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 12:49:51.517 UTC
# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
#  lldp
#   receive disable
#   destination mac-address
#    ieee-nearest-bridge
#   !
#  !
# !
# interface preconfigure GigabitEthernet0/0/0/2
#  lldp
#   transmit disable
#   destination mac-address
#    ieee-nearest-non-tmpr-bridge
#   !
#  !
# !
#
#


# Using replaced
#
#
# -------------
# Before state
# -------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 12:49:51.517 UTC
# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
#  lldp
#   receive disable
#   destination mac-address
#    ieee-nearest-bridge
#   !
#  !
# !
# interface preconfigure GigabitEthernet0/0/0/2
#  lldp
#   transmit disable
#   destination mac-address
#    ieee-nearest-non-tmpr-bridge
#   !
#  !
# !
#
#

- name: Replace existing LLDP configurations of specified interfaces with provided
    configuration
  cisco.iosxr.iosxr_lldp_interfaces:
    config:
    - name: GigabitEthernet0/0/0/1
      destination:
        mac_address: ieee-nearest-non-tmpr-bridge
    state: replaced

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
# "before": [
#        {
#            "name": "TenGigE0/0/0/0"
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/1",
#            "receive": false
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-non-tmpr-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/2",
#            "transmit": false
#        }
# ]
#
#
# "commands": [
#        "interface GigabitEthernet0/0/0/1",
#        "no lldp receive disable",
#        "lldp destination mac-address ieee-nearest-non-tmpr-bridge"
# ]
#
#
# "after": [
#        {
#            "name": "TenGigE0/0/0/0"
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-non-tmpr-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/1"
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-non-tmpr-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/2",
#            "transmit": false
#        }
# ]
#
#
# ------------
# After state
# ------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 13:02:57.062 UTC
# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
#  lldp
#   destination mac-address
#    ieee-nearest-non-tmpr-bridge
#   !
#  !
# !
# interface preconfigure GigabitEthernet0/0/0/2
#  lldp
#   transmit disable
#   destination mac-address
#    ieee-nearest-non-tmpr-bridge
#   !
#  !
# !
#
#


# Using overridden
#
#
# -------------
# Before state
# -------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 13:15:40.465 UTC
# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
#  lldp
#   receive disable
#   destination mac-address
#    ieee-nearest-bridge
#   !
#  !
# !
# interface preconfigure GigabitEthernet0/0/0/2
#  lldp
#   transmit disable
#   destination mac-address
#    ieee-nearest-non-tmpr-bridge
#   !
#  !
# !
#
#

- name: Override the LLDP configurations of all the interfaces with provided configurations
  cisco.iosxr.iosxr_lldp_interfaces:
    config:
    - name: GigabitEthernet0/0/0/1
      transmit: false
    state: overridden

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#
# "before": [
#        {
#            "name": "TenGigE0/0/0/0"
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/1",
#            "receive": false
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-non-tmpr-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/2",
#            "transmit": false
#        }
# ]
#
# "commands": [
#        "interface GigabitEthernet0/0/0/2",
#        "no lldp destination mac-address ieee-nearest-non-tmpr-bridge",
#        "no lldp transmit disable",
#        "interface GigabitEthernet0/0/0/1",
#        "no lldp destination mac-address ieee-nearest-bridge",
#        "no lldp receive disable",
#        "lldp transmit disable"
# ]
#
#
# "after": [
#        {
#            "name": "TenGigE0/0/0/0"
#        },
#        {
#            "name": "GigabitEthernet0/0/0/1",
#            "transmit": false
#        },
#        {
#            "name": "GigabitEthernet0/0/0/2"
#        }
# ]
#
#
# ------------
# After state
# ------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 13:22:25.604 UTC
# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
#  lldp
#   transmit disable
#  !
# !
# interface preconfigure GigabitEthernet0/0/0/2
# !
#
#


# Using deleted
#
#
# -------------
# Before state
# -------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 13:26:21.498 UTC
# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
#  lldp
#   receive disable
#   destination mac-address
#    ieee-nearest-bridge
#   !
#  !
# !
# interface preconfigure GigabitEthernet0/0/0/2
#  lldp
#   transmit disable
#   destination mac-address
#    ieee-nearest-non-tmpr-bridge
#   !
#  !
# !
#
#

- name: Delete LLDP configurations of all interfaces (Note - This won't delete the
    interfaces themselves)
  cisco.iosxr.iosxr_lldp_interfaces:
    state: deleted

#
#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#
# "before": [
#        {
#            "name": "TenGigE0/0/0/0"
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/1",
#            "receive": false
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-non-tmpr-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/2",
#            "transmit": false
#        }
# ]
#
#
# "commands": [
#        "interface GigabitEthernet0/0/0/1",
#        "no lldp destination mac-address ieee-nearest-bridge",
#        "no lldp receive disable",
#        "interface GigabitEthernet0/0/0/2",
#        "no lldp destination mac-address ieee-nearest-non-tmpr-bridge",
#        "no lldp transmit disable"
# ]
#
#
# "after": [
#        {
#            "name": "TenGigE0/0/0/0"
#        },
#        {
#            "name": "GigabitEthernet0/0/0/1"
#        },
#        {
#            "name": "GigabitEthernet0/0/0/2"
#        }
# ]
#
#
# ------------
# After state
# ------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 13:30:14.618 UTC
# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
# !
# interface preconfigure GigabitEthernet0/0/0/2
# !
#
#
# Using parsed:
# parsed.cfg

# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
#  lldp
#   receive disable
#   destination mac-address
#    ieee-nearest-bridge
#   !
#  !
# !
# interface preconfigure GigabitEthernet0/0/0/2
#  lldp
#   transmit disable
#   destination mac-address
#    ieee-nearest-non-tmpr-bridge

- name: Convert lacp interfaces config to argspec without connecting to the appliance
  cisco.iosxr.iosxr_lldp_interfaces:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed

# ------------------------
# Module Execution Result
# ------------------------

# parsed: [
#   - name: GigabitEthernet0/0/0/1
#       destination:
#         mac_address: ieee-nearest-non-tmpr-bridge
#       transmit: False

#     - name: GigabitEthernet0/0/0/2
#       destination:
#         mac_address: ieee-nearest-bridge
#       receive: False
#   ]

# Using gathered:
# Device config:

# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 12:49:51.517 UTC
# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
#  lldp
#   receive disable
#   destination mac-address
#    ieee-nearest-bridge
#   !
#  !
# !
# interface preconfigure GigabitEthernet0/0/0/2
#  lldp
#   transmit disable
#   destination mac-address
#    ieee-nearest-non-tmpr-bridge

- name: Gather IOSXR lldp interfaces configuration
  cisco.iosxr.iosxr_lldp_interfaces:
    config:
    state: gathered

# ------------------------
# Module Execution Result
# ------------------------

#   gathered:
#     - name: GigabitEthernet0/0/0/1
#       destination:
#         mac_address: ieee-nearest-non-tmpr-bridge
#       transmit: False

#     - name: GigabitEthernet0/0/0/2
#       destination:
#         mac_address: ieee-nearest-bridge
#       receive: False

# Using rendred:
- name: Render platform specific commands from task input using rendered state
  cisco.iosxr.iosxr_lldp_interfaces:
    config:
    - name: GigabitEthernet0/0/0/1
      destination:
        mac_address: ieee-nearest-non-tmpr-bridge
      transmit: false

    - name: GigabitEthernet0/0/0/2
      destination:
        mac_address: ieee-nearest-bridge
      receive: false
    state: rendered

# ------------------------
# Module Execution Result
# ------------------------

# "rendered": [
#        "interface GigabitEthernet0/0/0/2",
#        "lldp destination mac-address ieee-nearest-non-tmpr-bridge",
#        "lldp transmit disable",
#        "interface GigabitEthernet0/0/0/1",
#        "lldp receive disable",
#        "lldp destination mac-address ieee-nearest-bridge"
# ]

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
after list / elements=string	when changed	The configuration as structured data after module completion. Sample: The configuration returned will always be in the same format of the parameters above.
before list / elements=string	always	The configuration as structured data prior to module invocation. Sample: The configuration returned will always be in the same format of the parameters above.
commands list / elements=string	always	The set of commands pushed to the remote device. Sample: ['interface GigabitEthernet0/0/0/1', 'lldp destination mac-address ieee-nearest-non-tmpr-bridge', 'no lldp transmit disable']

Authors

Nilashish Chakraborty (@nilashishc)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/cisco/iosxr/iosxr_lldp_interfaces_module.html