cisco.iosxr.iosxr_interfaces – Interfaces resource module

Note

This plugin is part of the cisco.iosxr collection (version 1.2.1).

To install it use: ansible-galaxy collection install cisco.iosxr.

To use it in a playbook, specify: cisco.iosxr.iosxr_interfaces.

New in version 1.0.0: of cisco.iosxr

Synopsis

  • This module manages the interface attributes on Cisco IOS-XR network devices.

Note

This module has a corresponding action plugin.

Parameters

Parameter Choices/Defaults Comments
config
list / elements=dictionary
A dictionary of interface options
description
string
Interface description.
duplex
string
    Choices:
  • full
  • half
Configures the interface duplex mode. Default is auto-negotiation when not configured.
enabled
boolean
    Choices:
  • no
  • yes
Administrative state of the interface.
Set the value to True to administratively enable the interface or False to disable it.
mtu
integer
Sets the MTU value for the interface. Applicable for Ethernet interfaces only.
Refer to vendor documentation for valid values.
name
string / required
Full name of the interface to configure in type + path format. e.g. GigabitEthernet0/0/0/0
speed
integer
Configure the speed for an interface. Default is auto-negotiation when not configured.
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the IOS-XR device by executing the command show running-config interface.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • merged
  • parsed
  • deleted
  • replaced
  • rendered
  • gathered
  • overridden
The state of the configuration after module completion

Notes

Note

Examples

# Using merged
# Before state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  vrf custB
#  ipv4 address 178.18.169.23 255.255.255.0
#  dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
#  description Replaced by Ansible Team
#  mtu 2000
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  dot1q native vlan 1021
# !
- name: Configure Ethernet interfaces
  cisco.iosxr.iosxr_interfaces:
    config:
    - name: GigabitEthernet0/0/0/2
      description: Configured by Ansible
      enabled: true
    - name: GigabitEthernet0/0/0/3
      description: Configured by Ansible Network
      enabled: false
      duplex: full
    state: merged
# After state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  description Configured and Merged by Ansible Network
#  vrf custB
#  ipv4 address 178.18.169.23 255.255.255.0
#  dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
#  description Configured and Merged by Ansible Network
#  mtu 2600
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  duplex full
#  shutdown
#  dot1q native vlan 1021
# !
# Using replaced
# Before state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  description Configured by Ansible
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  description Test
#  vrf custB
#  ipv4 address 178.18.169.23 255.255.255.0
#  dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  dot1q native vlan 1021
# !
- name: Configure following interfaces and replace their existing config
  cisco.iosxr.iosxr_interfaces:
    config:
    - name: GigabitEthernet0/0/0/2
      description: Configured by Ansible
      enabled: true
      mtu: 2000
    - name: GigabitEthernet0/0/0/3
      description: Configured by Ansible Network
      enabled: false
      duplex: auto
    state: replaced
# After state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  description Configured by Ansible
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  description Configured and Replaced by Ansible
#  mtu 2000
#  vrf custB
#  ipv4 address 178.18.169.23 255.255.255.0
#  dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
#  description Configured and Replaced by Ansible Network
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  duplex half
#  shutdown
#  dot1q native vlan 1021
# !
# Using overridden
# Before state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  description Configured by Ansible
#  vrf custB
#  ipv4 address 178.18.169.23 255.255.255.0
#  dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
#  description Configured by Ansible
#  mtu 2600
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  duplex full
#  shutdown
#  dot1q native vlan 1021
# !
- name: Override interfaces
  cisco.iosxr.iosxr_interfaces:
    config:
    - name: GigabitEthernet0/0/0/2
      description: Configured by Ansible
      enabled: true
      duplex: auto
    - name: GigabitEthernet0/0/0/3
      description: Configured by Ansible Network
      enabled: false
      speed: 1000
    state: overridden
# After state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  description Configured and Overridden by Ansible Network
#  vrf custB
#  ipv4 address 178.18.169.23 255.255.255.0
#  speed 1000
#  dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
#  description Configured and Overridden by Ansible Network
#  mtu 2000
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  duplex full
#  shutdown
#  dot1q native vlan 1021
# !
# Using deleted
# Before state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  description Configured and Overridden by Ansible Network
#  vrf custB
#  ipv4 address 178.18.169.23 255.255.255.0
#  speed 1000
#  dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
#  description Configured and Overridden by Ansible Network
#  mtu 2000
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  duplex full
#  shutdown
#  dot1q native vlan 1021
# !
- name: Delete IOSXR interfaces as in given arguments
  cisco.iosxr.iosxr_interfaces:
    config:
    - name: GigabitEthernet0/0/0/2
    - name: GigabitEthernet0/0/0/3
    state: deleted
# After state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  vrf custB
#  ipv4 address 178.18.169.23 255.255.255.0
#  dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  dot1q native vlan 1021
# !
# Using parsed
# parsed.cfg
# ------------
#
# interface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 10.8.38.70 255.255.255.0
# !
# interface GigabitEthernet0/0/0/0
#  description Configured and Merged by Ansible-Network
#  mtu 110
#  ipv4 address 172.31.1.1 255.255.255.0
#  duplex half
# !
# interface GigabitEthernet0/0/0/3
#  shutdown
# !
# interface GigabitEthernet0/0/0/4
#  shutdown
# !
# - name: Convert ACL interfaces config to argspec without connecting to the appliance
#   cisco.iosxr.iosxr_interfaces:
#     running_config: "{{ lookup('file', './parsed.cfg') }}"
#     state: parsed
# Task Output (redacted)
# -----------------------
# "parsed": [
#        {
#            "name": "MgmtEth0/RP0/CPU0/0"
#        },
#        {
#            "access_groups": [
#                {
#                    "acls": [
#                        {
#                            "direction": "in",
#                            "name": "acl_1"
#                        },
#                        {
#                            "direction": "out",
#                            "name": "acl_2"
#                        }
#                    ],
#                    "afi": "ipv4"
#                },
#                {
#                    "acls": [
#                        {
#                            "direction": "in",
#                            "name": "acl6_1"
#                        },
#                        {
#                            "direction": "out",
#                            "name": "acl6_2"
#                        }
#                    ],
#                    "afi": "ipv6"
#                }
#            ],
#            "name": "GigabitEthernet0/0/0/0"
#        },
#        {
#            "access_groups": [
#                {
#                    "acls": [
#                        {
#                            "direction": "out",
#                            "name": "acl_1"
#                        }
#                    ],
#                    "afi": "ipv4"
#                }
#            ],
#            "name": "GigabitEthernet0/0/0/1"
#        }
#    ]
# }
# Using rendered
- name: Render platform specific commands from task input using rendered state
  cisco.iosxr.iosxr_interfaces:
    config:
    - name: GigabitEthernet0/0/0/0
      description: Configured and Merged by Ansible-Network
      mtu: 110
      enabled: true
      duplex: half
    - name: GigabitEthernet0/0/0/1
      description: Configured and Merged by Ansible-Network
      mtu: 2800
      enabled: false
      speed: 100
      duplex: full
    state: rendered
# Task Output (redacted)
# -----------------------
# "rendered": [
#         "interface GigabitEthernet0/0/0/0",
#         "description Configured and Merged by Ansible-Network",
#         "mtu 110",
#         "duplex half",
#         "no shutdown",
#         "interface GigabitEthernet0/0/0/1",
#         "description Configured and Merged by Ansible-Network",
#         "mtu 2800",
#         "speed 100",
#         "duplex full",
#         "shutdown"
#     ]
# Using gathered
# Before state:
# ------------
#
# RP/0/0/CPU0:an-iosxr-02#show running-config  interface
# interface Loopback888
# description test for ansible
# shutdown
# !
# interface MgmtEth0/0/CPU0/0
# ipv4 address 10.8.38.70 255.255.255.0
# !
# interface GigabitEthernet0/0/0/0
# description Configured and Merged by Ansible-Network
# mtu 110
# ipv4 address 172.31.1.1 255.255.255.0
# duplex half
# !
# interface GigabitEthernet0/0/0/3
# shutdown
# !
# interface GigabitEthernet0/0/0/4
# shutdown
# !
- name: Gather IOSXR interfaces as in given arguments
  cisco.iosxr.iosxr_interfaces:
    config:
    state: gathered
# Task Output (redacted)
# -----------------------
#
# "gathered": [
#         {
#             "description": "test for ansible",
#             "enabled": false,
#             "name": "Loopback888"
#         },
#         {
#             "description": "Configured and Merged by Ansible-Network",
#             "duplex": "half",
#             "enabled": true,
#             "mtu": 110,
#             "name": "GigabitEthernet0/0/0/0"
#         },
#         {
#             "enabled": false,
#             "name": "GigabitEthernet0/0/0/3"
#         },
#         {
#             "enabled": false,
#             "name": "GigabitEthernet0/0/0/4"
#         }
#     ]
# After state:
# ------------
#
# RP/0/0/CPU0:an-iosxr-02#show running-config  interface
# interface Loopback888
# description test for ansible
# shutdown
# !
# interface MgmtEth0/0/CPU0/0
# ipv4 address 10.8.38.70 255.255.255.0
# !
# interface GigabitEthernet0/0/0/0
# description Configured and Merged by Ansible-Network
# mtu 110
# ipv4 address 172.31.1.1 255.255.255.0
# duplex half
# !
# interface GigabitEthernet0/0/0/3
# shutdown
# !
# interface GigabitEthernet0/0/0/4
# shutdown
# !

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
after
list / elements=string
when changed
The configuration as structured data after module completion.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
list / elements=string
always
The configuration as structured data prior to module invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list / elements=string
always
The set of commands pushed to the remote device

Sample:
['interface GigabitEthernet0/0/0/2', 'description: Configured by Ansible', 'shutdown']


Authors

  • Sumit Jaiswal (@justjais)
  • Rohit Thakur (@rohitthakur2590)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/cisco/iosxr/iosxr_interfaces_module.html