cisco.ios.ios_bgp_global – Global BGP resource module

Note

This plugin is part of the cisco.ios collection (version 1.3.0).

To install it use: ansible-galaxy collection install cisco.ios.

To use it in a playbook, specify: cisco.ios.ios_bgp_global.

New in version 1.3.0: of cisco.ios

Synopsis

  • This module configures and manages the attributes of global bgp on Cisco IOS.

Note

This module has a corresponding action plugin.

Parameters

Parameter Choices/Defaults Comments
config
dictionary
A list of configurations for global bgp.
aggregate_address
dictionary
Configure BGP aggregate entries
address
string
Aggregate address
advertise_map
string
Set condition to advertise attribute
as_confed_set
boolean
    Choices:
  • no
  • yes
Generate AS confed set path information
as_set
boolean
    Choices:
  • no
  • yes
Generate AS set path information
attribute_map
string
Set attributes of aggregate
netmask
string
Aggregate mask
summary_only
boolean
    Choices:
  • no
  • yes
Filter more specific routes from updates
suppress_map
string
Conditionally filter more specific routes from updates
as_number
string / required
Autonomous system number.
auto_summary
boolean
    Choices:
  • no
  • yes
Enable automatic network number summarization
bgp
dictionary
Enable address family and enter its config mode
additional_paths
dictionary
Additional paths in the BGP table
install
boolean
    Choices:
  • no
  • yes
Additional paths to install into RIB
receive
boolean
    Choices:
  • no
  • yes
Receive additional paths from neighbors
select
dictionary
Selection criteria to pick the paths
all
boolean
    Choices:
  • no
  • yes
Select all available paths
best
integer
Select best N paths (2-3).
best_external
boolean
    Choices:
  • no
  • yes
Select best-external path
group_best
boolean
    Choices:
  • no
  • yes
Select group-best path
send
boolean
    Choices:
  • no
  • yes
Send additional paths to neighbors
advertise_best_external
boolean
    Choices:
  • no
  • yes
Advertise best external path to internal peers
aggregate_timer
integer
Configure Aggregation Timer
Please refer vendor documentation for valid values
always_compare_med
boolean
    Choices:
  • no
  • yes
Allow comparing MED from different neighbors
asnotation
boolean
    Choices:
  • no
  • yes
Change the default asplain notation
asdot notation
bestpath
list / elements=dictionary
Change the default bestpath selection
aigp
boolean
    Choices:
  • no
  • yes
if both paths doesn't have aigp ignore on bestpath comparision
ignore
compare_routerid
boolean
    Choices:
  • no
  • yes
Compare router-id for identical EBGP paths
cost_community
boolean
    Choices:
  • no
  • yes
cost community
igp_metric
boolean
    Choices:
  • no
  • yes
igp metric
Ignore igp metric in bestpath selection
med
dictionary
MED attribute
confed
boolean
    Choices:
  • no
  • yes
Compare MED among confederation paths
missing_as_worst
boolean
    Choices:
  • no
  • yes
Treat missing MED as the least preferred one
client_to_client
dictionary
Configure client to client route reflection
all
boolean
    Choices:
  • no
  • yes
inter-cluster and intra-cluster (default)
intra_cluster
string
intra cluster reflection
intra-cluster reflection for cluster-id
set
boolean
    Choices:
  • no
  • yes
set reflection of routes allowed
cluster_id
boolean
    Choices:
  • no
  • yes
Configure Route-Reflector Cluster-id (peers may reset)
A.B.C.D/Please refer vendor documentation for valid Route-Reflector Cluster-id
confederation
dictionary
AS confederation parameters
identifier
string
Set routing domain confederation AS
AS number
peers
string
Peer ASs in BGP confederation
AS number
consistency_checker
dictionary
Consistency-checker
auto_repair
dictionary
Auto-Repair
interval
integer
Set the bgp consistency checker
Please refer vendor documentation for valid values
set
boolean
    Choices:
  • no
  • yes
Enable Auto-Repair
error_message
dictionary
Log Error-Msg
interval
integer
Set the bgp consistency checker
Please refer vendor documentation for valid values
set
boolean
    Choices:
  • no
  • yes
Enable Error-Msg
dampening
dictionary
Enable route-flap dampening
max_suppress
integer
Maximum duration to suppress a stable route
Please refer vendor documentation for valid values
penalty_half_time
integer
Half-life time for the penalty
Please refer vendor documentation for valid values
reuse_route_val
integer
Value to start reusing a route
Please refer vendor documentation for valid values
route_map
string
Route-map to specify criteria for dampening
suppress_route_val
integer
Value to start suppressing a route
Please refer vendor documentation for valid values
deterministic_med
boolean
    Choices:
  • no
  • yes
Pick the best-MED path among paths advertised from the neighboring AS
dmzlink_bw
boolean
    Choices:
  • no
  • yes
Use DMZ Link Bandwidth as weight for BGP multipaths
enforce_first_as
boolean
    Choices:
  • no
  • yes
Enforce the first AS for EBGP routes(default)
enhanced_error
boolean
    Choices:
  • no
  • yes
Enabled BGP Enhanced error handling
fast_external_fallover
boolean
    Choices:
  • no
  • yes
Immediately reset session if a link to a directly connected external peer goes down
graceful_restart
dictionary
Graceful restart capability parameters
extended
boolean
    Choices:
  • no
  • yes
Enable Graceful-Restart Extension
restart_time
integer
Set the max time needed to restart and come back up
Please refer vendor documentation for valid values
set
boolean
    Choices:
  • no
  • yes
Set Graceful-Restart
stalepath_time
integer
Set the max time to hold onto restarting peer's stale paths
Please refer vendor documentation for valid values
graceful_shutdown
dictionary
Graceful shutdown capability parameters
community
string
Set Community for Gshut routes
community number/community number in aa:nn format
local_preference
integer
Set Local Preference for Gshut routes
Please refer vendor documentation for valid values
neighbors
dictionary
Gracefully shut down all neigbors
activate
boolean
    Choices:
  • no
  • yes
Activate graceful shutdown of all neigbors
time
integer
time in seconds
Please refer vendor documentation for valid values
vrfs
dictionary
Gracefully shut down all vrf neigbors
activate
boolean
    Choices:
  • no
  • yes
Activate graceful shutdown of all neigbors
time
integer
time in seconds
Please refer vendor documentation for valid values
inject_map
dictionary
Routemap which specifies prefixes to inject
copy_attributes
boolean
    Choices:
  • no
  • yes
Copy attributes from aggregate
exist_map_name
string
route-map name
name
string
route-map name
listen
dictionary
Neighbor subnet range listener
limit
integer
Set the max limit for the dynamic subnet range neighbors
Please refer vendor documentation for valid values
range
dictionary
Subnet network range
ipv4_with_subnet
string
IPv4 subnet range(A.B.C.D/nn)
ipv6_with_subnet
string
IPv6 subnet range(X:X:X:X::X/<0-128>)
peer_group
string
Member of the peer-group
log_neighbor_changes
boolean
    Choices:
  • no
  • yes
Log neighbor up/down and reset reason
maxas_limit
integer
Allow AS-PATH attribute from any neighbor imposing a limit on number of ASes
Please refer vendor documentation for valid values
maxcommunity_limit
integer
Allow COMMUNITY attribute from any neighbor imposing a limit on number of communities
Please refer vendor documentation for valid values
maxextcommunity_limit
integer
Allow EXTENDED COMMUNITY attribute from any neighbor imposing a limit on number of extended communities
Please refer vendor documentation for valid values
nexthop
dictionary
Nexthop tracking commands
route_map
string
Route map for valid nexthops
trigger
dictionary
nexthop trackings
delay
integer
Set the delay to tigger nexthop tracking
Please refer vendor documentation for valid values
enable
boolean
    Choices:
  • no
  • yes
Enable nexthop tracking
nopeerup_delay
list / elements=dictionary
Set how long BGP will wait for the first peer to come up before beginning the update delay or graceful restart timers (in seconds)
cold_boot
integer
How long to wait for the first peer to come up upon a cold boot
Please refer vendor documentation for valid values
nsf_switchover
integer
How long to wait for the first peer, post NSF switchover
Please refer vendor documentation for valid values
post_boot
integer
How long to wait for the first peer to come up once the system is already booted and all peers go down
Please refer vendor documentation for valid values
user_initiated
integer
How long to wait for the first peer, post a manual clear of BGP peers by the admin user
Please refer vendor documentation for valid values
recursion
boolean
    Choices:
  • no
  • yes
recursion rule for the nexthops
recursion via host for the nexthops
redistribute_internal
boolean
    Choices:
  • no
  • yes
Allow redistribution of iBGP into IGPs (dangerous)
refresh
dictionary
refresh
max_eor_time
integer
Configure refresh max-eor time
Please refer vendor documentation for valid values
stalepath_time
integer
Configure refresh stale-path time
Please refer vendor documentation for valid values
regexp
boolean
    Choices:
  • no
  • yes
Select regular expression engine
Enable bounded-execution-time regular expression engine
route_map
boolean
    Choices:
  • no
  • yes
route-map control commands
Have route-map set commands take priority over BGP commands such as next-hop unchanged
router_id
dictionary
Override configured router identifier (peers will reset)
address
string
Manually configured router identifier(A.B.C.D)
interface
string
Use IPv4 address on interface
vrf
boolean
    Choices:
  • no
  • yes
vrf-specific router id configuration
Automatically assign per-vrf bgp router id
scan_time
integer
Configure background scanner interval
Please refer vendor documentation for valid values
slow_peer
dictionary
Configure slow-peer
detection
dictionary
Slow-peer detection
set
boolean
    Choices:
  • no
  • yes
Slow-peer detection
threshold
integer
Set the slow-peer detection threshold
Please refer vendor documentation for valid values
split_update_group
dictionary
Configure slow-peer split-update-group
dynamic
boolean
    Choices:
  • no
  • yes
Dynamically split the slow peer to slow-update group
permanent
integer
Keep the slow-peer permanently in slow-update group
snmp
boolean
    Choices:
  • no
  • yes
BGP SNMP options
BGP SNMP trap options
Use cbgpPeer2Type as part of index for traps
soft_reconfig_backup
boolean
    Choices:
  • no
  • yes
Use soft-reconfiguration inbound only when route-refresh is not negotiated
sso
boolean
    Choices:
  • no
  • yes
Stateful Switchover
Enable SSO only for Route-Refresh capable peers
suppress_inactive
boolean
    Choices:
  • no
  • yes
Suppress routes that are not in the routing table
transport
boolean
    Choices:
  • no
  • yes
Global enable/disable transport session parameters
Transport path MTU discovery
update_delay
integer
Set the max initial delay for sending update
Please refer vendor documentation for valid values
update_group
boolean
    Choices:
  • no
  • yes
Manage peers in bgp update groups
Split update groups based on Policy
Keep peers with as-override in different update groups
upgrade_cli
dictionary
Upgrade to hierarchical AFI mode
af_mode
boolean
    Choices:
  • no
  • yes
Upgrade to AFI mode
set
boolean
    Choices:
  • no
  • yes
enable upgrade to hierarchical AFI mode
bmp
dictionary
BGP Monitoring Protocol)
buffer_size
integer
BMP Buffer Size
Please refer vendor documentation for valid values
initial_refresh
dictionary
Initial Refresh options
delay
integer
Delay before Initial Refresh
skip
boolean
    Choices:
  • no
  • yes
skip all refreshes
server
integer
Server Information
Please refer vendor documentation for valid values
default_information
boolean
    Choices:
  • no
  • yes
Control distribution of default information
Distribute a default route
default_metric
integer
Set metric of redistributed routes
Please refer vendor documentation for valid values
distance
dictionary
Define an administrative distance
admin
dictionary
Administrative distance
acl
string
IP Standard access list number
IP Standard expanded access list number
Standard access-list name
address
string
IP Source address (A.B.C.D)
distance
integer
Administrative distance
Please refer vendor documentation for valid values
wildcard_bit
string
Wildcard bits (A.B.C.D)
bgp
dictionary
BGP distance
routes_external
integer
Distance for routes external to the AS
Please refer vendor documentation for valid values
routes_internal
integer
Distance for routes internal to the AS
Please refer vendor documentation for valid values
routes_local
integer
Distance for local routes
Please refer vendor documentation for valid values
mbgp
dictionary
MBGP distance
routes_external
integer
Distance for routes external to the AS
Please refer vendor documentation for valid values
routes_internal
integer
Distance for routes internal to the AS
Please refer vendor documentation for valid values
routes_local
integer
Distance for local routes
Please refer vendor documentation for valid values
distribute_list
dictionary
Filter networks in routing updates
acl
string
IP access list number/name
in
boolean
    Choices:
  • no
  • yes
Filter incoming routing updates
interface
string
interface details
out
boolean
    Choices:
  • no
  • yes
Filter outgoing routing updates
maximum_paths
dictionary
Forward packets over multiple paths
eibgp
integer
Both eBGP and iBGP paths as multipath
ibgp
integer
iBGP-multipath
paths
integer
Number of paths
maximum_secondary_paths
dictionary
Maximum secondary paths
eibgp
integer
Both eBGP and iBGP paths as secondary multipath
ibgp
integer
iBGP-secondary-multipath
paths
integer
Number of secondary paths
neighbor
list / elements=dictionary
Specify a neighbor router
activate
boolean
    Choices:
  • no
  • yes
Enable the Address Family for this Neighbor
additional_paths
dictionary
Negotiate additional paths capabilities with this neighbor
disable
boolean
    Choices:
  • no
  • yes
Disable additional paths for this neighbor
receive
boolean
    Choices:
  • no
  • yes
Receive additional paths from neighbors
send
boolean
    Choices:
  • no
  • yes
Send additional paths to neighbors
address
string
Neighbor address (A.B.C.D)
advertise
dictionary
Advertise to this neighbor
additional_paths
dictionary
Advertise additional paths
all
boolean
    Choices:
  • no
  • yes
Select all available paths
best
integer
Select best N paths (2-3).
group_best
boolean
    Choices:
  • no
  • yes
Select group-best path
best_external
boolean
    Choices:
  • no
  • yes
Advertise best-external (at RRs best-internal) path
diverse_path
dictionary
Advertise additional paths
backup
boolean
    Choices:
  • no
  • yes
Diverse path can be backup path
mpath
boolean
    Choices:
  • no
  • yes
Diverse path can be multipath
advertise_map
dictionary
specify route-map for conditional advertisement
exist_map
string
advertise prefix only if prefix is in the condition exists
condition route-map name
name
string
advertise route-map name
non_exist_map
string
advertise prefix only if prefix in the condition does not exist
condition route-map name
advertisement_interval
integer
Minimum interval between sending BGP routing updates
aigp
dictionary
AIGP on neighbor
enable
boolean
    Choices:
  • no
  • yes
Enable AIGP
send
dictionary
Cost community or MED carrying AIGP VALUE
cost_community
dictionary
Cost extended community carrying AIGP Value
id
integer
Community ID
Please refer vendor documentation for valid values
poi
dictionary
Point of Insertion
igp_cost
boolean
    Choices:
  • no
  • yes
Point of Insertion After IGP
pre_bestpath
boolean
    Choices:
  • no
  • yes
Point of Insertion At Beginning
transitive
boolean
    Choices:
  • no
  • yes
Cost community is Transitive
med
boolean
    Choices:
  • no
  • yes
Med carrying AIGP Value
allow_policy
boolean
    Choices:
  • no
  • yes
Enable the policy support for this IBGP Neighbor
allowas_in
integer
Accept as-path with my AS present in it
as_override
boolean
    Choices:
  • no
  • yes
Override matching AS-number while sending update
Maintain Split Horizon while sending update
bmp_activate
dictionary
Activate the BMP monitoring for a BGP peer
all
boolean
    Choices:
  • no
  • yes
Activate BMP monitoring for all servers
server
integer
Activate BMP for server
BMP Server Number
Please refer vendor documentation for valid values
capability
dictionary
Advertise capability to the peer
Advertise ORF capability to the peer
Advertise prefixlist ORF capability to this neighbor
both
boolean
    Choices:
  • no
  • yes
Capability to SEND and RECEIVE the ORF to/from this neighbor
receive
boolean
    Choices:
  • no
  • yes
Capability to RECEIVE the ORF from this neighbor
send
boolean
    Choices:
  • no
  • yes
Capability to SEND the ORF to this neighbor
cluster_id
string
Configure Route-Reflector Cluster-id (peers may reset)
Route-Reflector Cluster-id as 32 bit quantity, or Route-Reflector Cluster-id in IP address format (A.B.C.D)
default_originate
dictionary
Originate default route to this neighbor
route_map
string
Route-map to specify criteria to originate default
set
boolean
    Choices:
  • no
  • yes
Originate default route to this neighbor
description
string
Neighbor specific description
disable_connected_check
boolean
    Choices:
  • no
  • yes
one-hop away EBGP peer using loopback address
distribute_list
dictionary
Filter updates to/from this neighbor
acl
string
IP access list number/name
in
boolean
    Choices:
  • no
  • yes
Filter incoming updates
out
boolean
    Choices:
  • no
  • yes
Filter outgoing updates
dmzlink_bw
boolean
    Choices:
  • no
  • yes
Propagate the DMZ link bandwidth
ebgp_multihop
dictionary
Allow EBGP neighbors not on directly connected networks
enable
boolean
    Choices:
  • no
  • yes
Allow EBGP neighbors not on directly connected networks
hop_count
integer
Maximum hop count
Please refer vendor documentation for valid values
fall_over
dictionary
Session fall on peer route lost
bfd
dictionary
Use BFD to detect failure
multi_hop
boolean
    Choices:
  • no
  • yes
Force BFD multi-hop to detect failure
set
boolean
    Choices:
  • no
  • yes
set bfd
single_hop
boolean
    Choices:
  • no
  • yes
Force BFD single-hop to detect failure
route_map
string
Route map for peer route
filter_list
dictionary
Establish BGP filters
in
boolean
    Choices:
  • no
  • yes
Filter incoming updates
out
boolean
    Choices:
  • no
  • yes
Filter outgoing updates
path_acl
string
AS path access list
ha_mode
dictionary
high availability mode
disable
boolean
    Choices:
  • no
  • yes
disable graceful-restart
set
boolean
    Choices:
  • no
  • yes
set ha-mode and graceful-restart for this peer
inherit
string
Inherit a template
Inherit a peer-session template and Template name
ipv6_adddress
string
Neighbor ipv6 address (X:X:X:X::X)
local_as
dictionary
Specify a local-as number
dual_as
boolean
    Choices:
  • no
  • yes
Accept either real AS or local AS from the ebgp peer
no_prepend
dictionary
Do not prepend local-as to updates from ebgp peers
replace_as
boolean
    Choices:
  • no
  • yes
Replace real AS with local AS in the EBGP updates
set
boolean
    Choices:
  • no
  • yes
Set prepend
number
integer
AS number used as local AS
Please refer vendor documentation for valid values
set
boolean
    Choices:
  • no
  • yes
set local-as number
log_neighbor_changes
dictionary
Log neighbor up/down and reset reason
disable
boolean
    Choices:
  • no
  • yes
disable Log neighbor up/down and reset
set
boolean
    Choices:
  • no
  • yes
set Log neighbor up/down and reset
maximum_prefix
dictionary
Maximum number of prefixes accepted from this peer
max_no
integer
maximum no. of prefix limit
restart
integer
Restart bgp connection after limit is exceeded
threshold_val
integer
Threshold value (%) at which to generate a warning msg
warning_only
boolean
    Choices:
  • no
  • yes
Only give warning message when limit is exceeded
next_hop_self
dictionary
Disable the next hop calculation for this neighbor
all
boolean
    Choices:
  • no
  • yes
Enable next-hop-self for both eBGP and iBGP received paths
set
boolean
    Choices:
  • no
  • yes
Enable next-hop-self
next_hop_unchanged
dictionary
Propagate next hop unchanged for iBGP paths to this neighbor
Propagate next hop unchanged for all paths (iBGP and eBGP) to this neighbor
allpaths
boolean
    Choices:
  • no
  • yes
Propagate next hop unchanged for all paths (iBGP and eBGP) to this neighbor
set
boolean
    Choices:
  • no
  • yes
Enable next-hop-unchanged
password
string
Set a password
path_attribute
dictionary
BGP optional attribute filtering
discard
dictionary
Discard matching path-attribute for this neighbor
in
boolean
    Choices:
  • no
  • yes
Perform inbound path-attribute filtering
range
dictionary
path attribute range
end
integer
path attribute range end value
Please refer vendor documentation for valid values
start
integer
path attribute range start value
Please refer vendor documentation for valid values
type
integer
path attribute type
Please refer vendor documentation for valid values
treat_as_withdraw
dictionary
Treat-as-withdraw matching path-attribute for this neighbor
in
boolean
    Choices:
  • no
  • yes
Perform inbound path-attribute filtering
range
dictionary
path attribute range
end
integer
path attribute range end value
Please refer vendor documentation for valid values
start
integer
path attribute range start value
Please refer vendor documentation for valid values
type
integer
path attribute type
Please refer vendor documentation for valid values
peer_group
string
Member of the peer-group
remote_as
integer
Specify a BGP neighbor
AS of remote neighbor
remove_private_as
dictionary
Remove private AS number from outbound updates
all
boolean
    Choices:
  • no
  • yes
Remove all private AS numbers
replace_as
boolean
    Choices:
  • no
  • yes
Replace all private AS numbers with local AS
set
boolean
    Choices:
  • no
  • yes
Remove private AS number
route_map
dictionary
Apply route map to neighbor
in
boolean
    Choices:
  • no
  • yes
Apply map to incoming routes
name
string
Replace all private AS numbers with local AS
out
boolean
    Choices:
  • no
  • yes
Apply map to outbound routes
route_reflector_client
boolean
    Choices:
  • no
  • yes
Configure a neighbor as Route Reflector client
route_server_client
dictionary
Configure a neighbor as Route Server client
context
string
Specify Route Server context for neighbor
Route Server context name
set
boolean
    Choices:
  • no
  • yes
Set Route Server client
send_community
dictionary
Send Community attribute to this neighbor
both
boolean
    Choices:
  • no
  • yes
Send Standard and Extended Community attributes
extended
boolean
    Choices:
  • no
  • yes
Send Extended Community attribute
set
boolean
    Choices:
  • no
  • yes
Set send Community attribute to this neighbor
standard
boolean
    Choices:
  • no
  • yes
Send Standard Community attribute
send_label
dictionary
Send NLRI + MPLS Label to this peer
explicit_null
boolean
    Choices:
  • no
  • yes
Advertise Explicit Null label in place of Implicit Null
set
boolean
    Choices:
  • no
  • yes
Set send NLRI + MPLS Label to this peer
shutdown
dictionary
Administratively shut down this neighbor
graceful
integer
Gracefully shut down this neighbor
time in seconds
Please refer vendor documentation for valid values
set
boolean
    Choices:
  • no
  • yes
shut down
slow_peer
dictionary
Configure slow-peer
detection
dictionary
Configure slow-peer
disable
boolean
    Choices:
  • no
  • yes
Disable slow-peer detection
enable
boolean
    Choices:
  • no
  • yes
Enable slow-peer detection
threshold
integer
Set the slow-peer detection threshold
split_update_group
dictionary
Configure slow-peer split-update-group
dynamic
dictionary
Dynamically split the slow peer to slow-update group
disable
boolean
    Choices:
  • no
  • yes
Disable slow-peer detection
enable
boolean
    Choices:
  • no
  • yes
Enable slow-peer detection
permanent
boolean
    Choices:
  • no
  • yes
Keep the slow-peer permanently in slow-update group
static
boolean
    Choices:
  • no
  • yes
Static slow-peer
soft_reconfiguration
boolean
    Choices:
  • no
  • yes
Per neighbor soft reconfiguration
Allow inbound soft reconfiguration for this neighbor
tag
string
Neighbor tag
timers
dictionary
BGP per neighbor timers
holdtime
integer
Holdtime
interval
integer
Keepalive interval
min_holdtime
integer
Minimum hold time from neighbor
translate_update
dictionary
Translate Update to MBGP format
nlri
dictionary
Specify type of nlri to translate to
multicast
boolean
    Choices:
  • no
  • yes
Translate Update to multicast nlri
unicast
boolean
    Choices:
  • no
  • yes
Process Update as unicast nlri
set
boolean
    Choices:
  • no
  • yes
Set Translate Update
transport
dictionary
Transport options
connection_mode
dictionary
Specify passive or active connection
active
boolean
    Choices:
  • no
  • yes
Actively establish the TCP session
passive
boolean
    Choices:
  • no
  • yes
Passively establish the TCP session
multi_session
boolean
    Choices:
  • no
  • yes
Use Multi-session for transport
path_mtu_discovery
dictionary
Use transport path MTU discovery
disable
boolean
    Choices:
  • no
  • yes
disable
set
boolean
    Choices:
  • no
  • yes
Use path MTU discovery
ttl_security
integer
BGP ttl security check
maximum number of hops
Please refer vendor documentation for valid values
unsuppress_map
string
Route-map to selectively unsuppress suppressed routes
Name of route map
version
integer
Set the BGP version to match a neighbor
Neighbor's BGP version
Please refer vendor documentation for valid values
weight
integer
Set default weight for routes from this neighbor
redistribute
list / elements=dictionary
Redistribute information from another routing protocol
application
dictionary
Application
metric
integer
Metric for redistributed routes
name
string
Application name
route_map
string
Route map reference
bgp
dictionary
Border Gateway Protocol (BGP)
as_number
string
Autonomous system number
metric
integer
Metric for redistributed routes
route_map
string
Route map reference
connected
dictionary
Connected
metric
integer
Metric for redistributed routes
route_map
string
Route map reference
eigrp
dictionary
Enhanced Interior Gateway Routing Protocol (EIGRP)
as_number
string
Autonomous system number
metric
integer
Metric for redistributed routes
route_map
string
Route map reference
isis
dictionary
ISO IS-IS
area_tag
string
ISO routing area tag
clns
boolean
    Choices:
  • no
  • yes
Redistribution of OSI dynamic routes
ip
boolean
    Choices:
  • no
  • yes
Redistribution of IP dynamic routes
metric
integer
Metric for redistributed routes
route_map
string
Route map reference
iso_igrp
dictionary
IGRP for OSI networks
area_tag
string
ISO routing area tag
route_map
string
Route map reference
lisp
dictionary
Locator ID Separation Protocol (LISP)
metric
integer
Metric for redistributed routes
route_map
string
Route map reference
mobile
dictionary
Mobile routes
metric
integer
Metric for redistributed routes
route_map
string
Route map reference
odr
dictionary
On Demand stub Routes
metric
integer
Metric for redistributed routes
route_map
string
Route map reference
ospf
dictionary
Open Shortest Path First (OSPF)
match
dictionary
On Demand stub Routes
external
boolean
    Choices:
  • no
  • yes
Redistribute OSPF external routes
internal
boolean
    Choices:
  • no
  • yes
Redistribute OSPF internal routes
nssa_external
boolean
    Choices:
  • no
  • yes
Redistribute OSPF NSSA external routes
type_1
boolean
    Choices:
  • no
  • yes
Redistribute NSSA external type 1 routes
type_2
boolean
    Choices:
  • no
  • yes
Redistribute NSSA external type 2 routes
metric
integer
Metric for redistributed routes
process_id
integer
Process ID
route_map
string
Route map reference
vrf
string
VPN Routing/Forwarding Instance
ospfv3
dictionary
OSPFv3
match
dictionary
On Demand stub Routes
external
boolean
    Choices:
  • no
  • yes
Redistribute OSPF external routes
internal
boolean
    Choices:
  • no
  • yes
Redistribute OSPF internal routes
nssa_external
boolean
    Choices:
  • no
  • yes
Redistribute OSPF NSSA external routes
type_1
boolean
    Choices:
  • no
  • yes
Redistribute NSSA external type 1 routes
type_2
boolean
    Choices:
  • no
  • yes
Redistribute NSSA external type 2 routes
metric
integer
Metric for redistributed routes
process_id
integer
Process ID
route_map
string
Route map reference
rip
dictionary
Routing Information Protocol (RIP)
metric
integer
Metric for redistributed routes
route_map
string
Route map reference
static
dictionary
Static routes
clns
boolean
    Choices:
  • no
  • yes
Redistribution of OSI static routes
ip
boolean
    Choices:
  • no
  • yes
Redistribution of IP static routes
metric
integer
Metric for redistributed routes
route_map
string
Route map reference
vrf
dictionary
Specify a source VRF
global
boolean
    Choices:
  • no
  • yes
global VRF
name
string
Source VRF name
route_server_context
dictionary
Enter route server context command mode
address_family
dictionary
Enter address family command mode
afi
string
    Choices:
  • ipv4
  • ipv6
Address family
import_map
string
Import matching routes using a route map
Name of route map
modifier
string
    Choices:
  • multicast
  • unicast
Address Family modifier
description
string
Textual description of the router server context
name
string
Name of route server context
scope
dictionary
Enter scope command mode
global
boolean
    Choices:
  • no
  • yes
Global scope
vrf
string
VRF scope
VPN Routing/Forwarding instance name
synchronization
boolean
    Choices:
  • no
  • yes
Perform IGP synchronization
table_map
dictionary
Map external entry attributes into routing table
filter
boolean
    Choices:
  • no
  • yes
Selective route download
name
string
route-map name
template
dictionary
Enter template command mode
peer_policy
string
Template configuration for policy parameters
peer_session
string
Template configuration for session parameters
timers
dictionary
Adjust routing timers
BGP timers
holdtime
integer
Holdtime
keepalive
integer
Keepalive interval
min_holdtime
integer
Minimum hold time from neighbor
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the IOS device by executing the command sh running-config | section ^router bgp.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • merged
  • replaced
  • overridden
  • deleted
  • purged
  • gathered
  • rendered
  • parsed
The state the configuration should be left in
The states rendered, gathered and parsed does not perform any change on the device.
The state rendered will transform the configuration in config option to platform specific CLI commands which will be returned in the rendered key within the result. For state rendered active connection to remote host is not required.
The state gathered will fetch the running configuration from device and transform it into structured data in the format as per the resource module argspec and the value is returned in the gathered key within the result.
The state parsed reads the configuration from running_config option and transforms it into JSON format as per the resource module parameters and the value is returned in the parsed key within the result. The value of running_config option should be the same format as the output of command show running-config | include ip route|ipv6 route executed on device. For state parsed active connection to remote host is not required.

Notes

Note

  • Tested against Cisco IOSv Version 15.2 on VIRL

Examples

# Using merged

# Before state:
# -------------
#
# vios#sh running-config | section ^router bgp

- name: Merge provided configuration with device configuration
  cisco.ios.ios_bgp_global:
    config:
      as_number: 65000
      bgp:
        advertise_best_external: true
        bestpath:
          - compare_routerid: true
        nopeerup_delay:
          - post_boot: 10
        dampening:
          penalty_half_time: 1
          reuse_route_val: 1
          suppress_route_val: 1
          max_suppress: 1
        graceful_shutdown:
          neighbors:
            time: 50
          community: 100
          local_preference: 100
      neighbor:
        - address: 198.51.100.1
          description:  merge neighbor
          remote_as: 100
          aigp:
            send:
              cost_community:
                id: 100
                poi:
                  igp_cost: true
                  transitive: true
          route_map:
            name: test-route
            out: true
    state: merged

# Commands fired:
# ---------------
#
#  "commands": [
#         "router bgp 65000",
#         "bgp dampening 1 1 1 1",
#         "bgp graceful-shutdown all neighbors 50 community 100 local-preference 100",
#         "bgp advertise-best-external",
#         "bgp nopeerup-delay post-boot 10",
#         "bgp bestpath compare-routerid",
#         "neighbor 198.51.100.1 remote-as 100",
#         "neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive",
#         "neighbor 198.51.100.1 description merge neighbor",
#         "neighbor 198.51.100.1 route-map test-route out"
#     ]

# After state:
# ------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp nopeerup-delay post-boot 10
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  bgp bestpath compare-routerid
#  bgp dampening 1 1 1 1
#  bgp advertise-best-external
#  neighbor 198.51.100.1 remote-as 100
#  neighbor 198.51.100.1 description merge neighbor
#  neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive
#  neighbor 198.51.100.1 route-map test-route out


# Using replaced

# Before state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp nopeerup-delay post-boot 10
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  bgp bestpath compare-routerid
#  bgp dampening 1 1 1 1
#  bgp advertise-best-external
#  neighbor 198.51.100.1 remote-as 100
#  neighbor 198.51.100.1 description merge neighbor
#  neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive
#  neighbor 198.51.100.1 route-map test-route out


- name: Replaces device configuration of listed global BGP with provided configuration
  cisco.ios.ios_bgp_global:
    config:
      as_number: 65000
      bgp:
        advertise_best_external: true
        bestpath:
          - med:
              confed: true
        log_neighbor_changes: true
        nopeerup_delay:
          - post_boot: 10
            cold_boot: 20
      neighbor:
        - address: 192.0.2.1
          description:  replace neighbor
          remote_as: 100
          slow_peer:
            detection:
              disable: true
    state: replaced

# Commands fired:
# ---------------
#
#  "commands": [
#     "router bgp 65000"
#     "no bgp dampening 1 1 1 1"
#     "no timers bgp 100 200 150"
#     "no bgp bestpath compare-routerid"
#     "bgp bestpath med confed"
#     "bgp nopeerup-delay cold-boot 20"
#     "no neighbor 198.51.100.1 remote-as 100"
#     "neighbor 192.0.2.1 remote-as 100"
#     "no bgp graceful-shutdown all neighbors 50 local-preference 100 community 100"
#     "no neighbor 198.51.100.1 route-map test-route out"
#     "no neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive"
#     "no neighbor 198.51.100.1 description merge neighbor"
#     "neighbor 192.0.2.1 slow-peer detection disable"
#     "neighbor 192.0.2.1 description replace neighbor"
# ]


# After state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp log-neighbor-changes
#  bgp nopeerup-delay cold-boot 20
#  bgp nopeerup-delay post-boot 10
#  bgp bestpath med confed
#  bgp advertise-best-external
#  redistribute connected metric 10
#  neighbor 192.0.2.1 remote-as 100
#  neighbor 192.0.2.1 description replace neighbor
#  neighbor 192.0.2.1 slow-peer detection disable

# Using Deleted

# Before state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp nopeerup-delay post-boot 10
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  bgp bestpath compare-routerid
#  bgp dampening 1 1 1 1
#  bgp advertise-best-external
#  neighbor 198.51.100.1 remote-as 100
#  neighbor 198.51.100.1 description merge neighbor
#  neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive
#  neighbor 198.51.100.1 route-map test-route out

- name: "Delete global BGP (Note: This won't delete the configured global BGP)"
  cisco.ios.ios_bgp_global:
    config:
      as_number: 65000
    state: deleted

# Commands fired:
# ---------------
#  "commands": [
#         "router bgp 65000",
#         "no bgp dampening 1 1 1 1",
#         "no bgp graceful-shutdown all neighbors 50 community 100 local-preference 100",
#         "no bgp advertise-best-external",
#         "no bgp bestpath compare-routerid",
#         "no bgp nopeerup-delay post-boot 10",
#         "no neighbor 198.51.100.1 remote-as 100",
#         "no neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive",
#         "no neighbor 198.51.100.1 description merge neighbor",
#         "no neighbor 198.51.100.1 route-map test-route out"
#     ]


# After state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000


# Using Deleted without any config passed
#"(NOTE: This will delete all of configured global BGP)"

# Before state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp nopeerup-delay post-boot 10
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  bgp bestpath compare-routerid
#  bgp dampening 1 1 1 1
#  bgp advertise-best-external
#  neighbor 198.51.100.1 remote-as 100
#  neighbor 198.51.100.1 description merge neighbor
#  neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive
#  neighbor 198.51.100.1 route-map test-route out


- name: "Delete global BGP without config"
  cisco.ios.ios_bgp_global:
    state: deleted

# Commands fired:
# ---------------
#  "commands": [
#         "router bgp 65000",
#         "no bgp dampening 1 1 1 1",
#         "no bgp graceful-shutdown all neighbors 50 community 100 local-preference 100",
#         "no bgp advertise-best-external",
#         "no bgp bestpath compare-routerid",
#         "no bgp nopeerup-delay post-boot 10",
#         "no neighbor 198.51.100.1 remote-as 100",
#         "no neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive",
#         "no neighbor 198.51.100.1 description merge neighbor",
#         "no neighbor 198.51.100.1 route-map test-route out"
#     ]


# After state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000

# Using Purged
#"(NOTE: This WILL delete the configured global BGP)"

# Before state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp nopeerup-delay post-boot 10
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  bgp bestpath compare-routerid
#  bgp dampening 1 1 1 1
#  bgp advertise-best-external
#  neighbor 198.51.100.1 remote-as 100
#  neighbor 198.51.100.1 description merge neighbor
#  neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive
#  neighbor 198.51.100.1 route-map test-route out


- name: 'Delete the configured global BGP (Note: This WILL delete the the configured
    global BGP)'
  cisco.ios.ios_bgp_global:
    state: purged

# Commands fired:
# ---------------
#  "commands": [
#         "no router bgp 65000",
#     ]

# After state:
# -------------
#
# vios#sh running-config | section ^router bgp

# Using Gathered

# Before state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp nopeerup-delay post-boot 10
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  bgp bestpath compare-routerid
#  bgp dampening 1 1 1 1
#  bgp advertise-best-external
#  neighbor 198.51.100.1 remote-as 100
#  neighbor 198.51.100.1 description merge neighbor
#  neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive
#  neighbor 198.51.100.1 route-map test-route out


- name: Gather listed global BGP with provided configurations
  cisco.ios.ios_bgp_global:
    config:
    state: gathered

# Module Execution Result:
# ------------------------
#
#  "gathered": {
#         "as_number": "65000",
#         "bgp": {
#             "advertise_best_external": true,
#             "bestpath": [
#                 {
#                     "compare_routerid": true
#                 }
#             ],
#             "dampening": {
#                 "max_suppress": 1,
#                 "penalty_half_time": 1,
#                 "reuse_route_val": 1,
#                 "suppress_route_val": 1
#             },
#             "graceful_shutdown": {
#                 "community": "100",
#                 "local_preference": 100,
#                 "neighbors": {
#                     "time": 50
#                 }
#             },
#             "nopeerup_delay": [
#                 {
#                     "post_boot": 10
#                 }
#             ]
#         },
#         "neighbor": [
#             {
#                 "address": "198.51.100.1",
#                 "aigp": {
#                     "send": {
#                         "cost_community": {
#                             "id": 100,
#                             "poi": {
#                                 "igp_cost": true,
#                                 "transitive": true
#                             }
#                         }
#                     }
#                 },
#                 "description": "merge neighbor",
#                 "remote_as": 100,
#                 "route_map": {
#                     "name": "test-route",
#                     "out": true
#                 }
#             }
#         ]
#     }

# Using Rendered

- name: Rendered the provided configuration with the exisiting running configuration
  cisco.ios.ios_bgp_global:
    config:
      as_number: 65000
      bgp:
        advertise_best_external: true
        bestpath:
          - compare_routerid: true
        nopeerup_delay:
          - post_boot: 10
        dampening:
          penalty_half_time: 1
          reuse_route_val: 1
          suppress_route_val: 1
          max_suppress: 1
        graceful_shutdown:
          neighbors:
            time: 50
          community: 100
          local_preference: 100
      neighbor:
        - address: 198.51.100.1
          description:  merge neighbor
          remote_as: 100
          aigp:
            send:
              cost_community:
                id: 100
                poi:
                  igp_cost: true
                  transitive: true
          route_map:
            name: test-route
            out: true
    state: rendered

# Module Execution Result:
# ------------------------
#
# "rendered": [
#       "router bgp 65000",
#       "bgp dampening 1 1 1 1",
#       "bgp graceful-shutdown all neighbors 50 community 100 local-preference 100",
#       "bgp advertise-best-external",
#       "bgp nopeerup-delay post-boot 10",
#       "bgp bestpath compare-routerid",
#       "neighbor 198.51.100.1 remote-as 100",
#       "neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive",
#       "neighbor 198.51.100.1 description merge neighbor",
#       "neighbor 198.51.100.1 route-map test-route out"
#  ]

# Using Parsed

# File: parsed.cfg
# ----------------
#
# router bgp 65000
#  bgp nopeerup-delay post-boot 10
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  bgp bestpath compare-routerid
#  bgp dampening 1 1 1 1
#  bgp advertise-best-external
#  neighbor 198.51.100.1 remote-as 100
#  neighbor 198.51.100.1 description merge neighbor
#  neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive
#  neighbor 198.51.100.1 route-map test-route out

- name: Parse the commands for provided configuration
  cisco.ios.ios_bgp_global:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Module Execution Result:
# ------------------------
#
#  "parsed": {
#         "as_number": "65000",
#         "bgp": {
#             "advertise_best_external": true,
#             "bestpath": [
#                 {
#                     "compare_routerid": true
#                 }
#             ],
#             "dampening": {
#                 "max_suppress": 1,
#                 "penalty_half_time": 1,
#                 "reuse_route_val": 1,
#                 "suppress_route_val": 1
#             },
#             "graceful_shutdown": {
#                 "community": "100",
#                 "local_preference": 100,
#                 "neighbors": {
#                     "time": 50
#                 }
#             },
#             "nopeerup_delay": [
#                 {
#                     "post_boot": 10
#                 }
#             ]
#         },
#         "neighbor": [
#             {
#                 "address": "198.51.100.1",
#                 "aigp": {
#                     "send": {
#                         "cost_community": {
#                             "id": 100,
#                             "poi": {
#                                 "igp_cost": true,
#                                 "transitive": true
#                             }
#                         }
#                     }
#                 },
#                 "description": "merge neighbor",
#                 "remote_as": 100,
#                 "route_map": {
#                     "name": "test-route",
#                     "out": true
#                 }
#             }
#         ]
#     }

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
after
list / elements=string
when changed
The configuration as structured data after module completion.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
list / elements=string
always
The configuration as structured data prior to module invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list / elements=string
always
The set of commands pushed to the remote device

Sample:
['router bgp 65000', 'bgp nopeerup-delay post-boot 10', 'bgp advertise-best-external']


Authors

  • Sumit Jaiswal (@justjais)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/cisco/ios/ios_bgp_global_module.html