cisco.ucs.ucs_san_connectivity – Configures SAN Connectivity Policies on Cisco UCS Manager

Note

This plugin is part of the cisco.ucs collection (version 1.6.0).

To install it use: ansible-galaxy collection install cisco.ucs.

To use it in a playbook, specify: cisco.ucs.ucs_san_connectivity.

New in version 2.5: of cisco.ucs

Synopsis

  • Configures SAN Connectivity Policies on Cisco UCS Manager.

Requirements

The below requirements are needed on the host that executes this module.

  • ucsmsdk

Parameters

Parameter Choices/Defaults Comments
description
string
A description of the policy.
Cisco recommends including information about where and when to use the policy.
Enter up to 256 characters.
You can use any characters or spaces except the following:
` (accent mark), (backslash), ^ (carat), " (double quote), = (equal sign), > (greater than), < (less than), or ' (single quote).

aliases: descr
hostname
string / required
IP address or hostname of Cisco UCS Manager.
Modules can be used with the UCS Platform Emulator https://cs.co/ucspe
name
string / required
The name of the SAN Connectivity Policy.
This name can be between 1 and 16 alphanumeric characters.
You cannot use spaces or any special characters other than - (hyphen), "_" (underscore), : (colon), and . (period).
You cannot change this name after the policy is created.
org_dn
string
Default:
"org-root"
Org dn (distinguished name)
password
string / required
Password for Cisco UCS Manager authentication.
port
integer
Port number to be used during connection (by default uses 443 for https and 80 for http connection).
proxy
string
If use_proxy is no, specfies proxy to be used for connection. e.g. 'http://proxy.xy.z:8080'
state
string
    Choices:
  • present ←
  • absent
If present, will verify SAN Connectivity Policies are present and will create if needed.
If absent, will verify SAN Connectivity Policies are absent and will delete if needed.
use_proxy
boolean
    Choices:
  • no
  • yes ←
If no, will not use the proxy as defined by system environment variable.
use_ssl
boolean
    Choices:
  • no
  • yes ←
If no, an HTTP connection will be used instead of the default HTTPS connection.
username
string
Default:
"admin"
Username for Cisco UCS Manager authentication.
vhba_list
string
List of vHBAs used by the SAN Connectivity Policy.
vHBAs used by the SAN Connectivity Policy must be created from a vHBA template.
Each list element has the following suboptions:
= name
The name of the virtual HBA (required).
= vhba_template
The name of the virtual HBA template (required).
- adapter_policy
The name of the Fibre Channel adapter policy.
A user defined policy can be used, or one of the system defined policies (default, Linux, Solaris, VMware, Windows, WindowsBoot)
[Default: default]
- order
String specifying the vHBA assignment order (e.g., '1', '2').
[Default: unspecified]
wwnn_pool
string
Default:
"default"
Name of the WWNN pool to use for WWNN assignment.

Examples

- name: Configure SAN Connectivity Policy
  cisco.ucs.ucs_san_connectivity:
    hostname: 172.16.143.150
    username: admin
    password: password
    name: Cntr-FC-Boot
    wwnn_pool: WWNN-Pool
    vhba_list:
    - name: Fabric-A
      vhba_template: vHBA-Template-A
      adapter_policy: Linux
    - name: Fabric-B
      vhba_template: vHBA-Template-B
      adapter_policy: Linux

- name: Remove SAN Connectivity Policy
  cisco.ucs.ucs_san_connectivity:
    hostname: 172.16.143.150
    username: admin
    password: password
    name: Cntr-FC-Boot
    state: absent

Authors

  • David Soper (@dsoper2)
  • John McDonough (@movinalot)
  • CiscoUcs (@CiscoUcs)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/cisco/ucs/ucs_san_connectivity_module.html