bigip_snmp_trap - Manipulate SNMP trap information on a BIG-IP

New in version 2.4.

Synopsis

  • Manipulate SNMP trap information on a BIG-IP.

Requirements

The below requirements are needed on the host that executes this module.

  • f5-sdk >= 3.0.9

Parameters

Parameter Choices/Defaults Comments
community
Specifies the community name for the trap destination.
destination
Specifies the address for the trap destination. This can be either an IP address or a hostname.
name
required
Name of the SNMP configuration endpoint.
network
    Choices:
  • other
  • management
  • default
Specifies the name of the trap network. This option is not supported in versions of BIG-IP < 12.1.0. If used on versions < 12.1.0, it will simply be ignored.
partition
(added in 2.5)
Default:
Common
Device partition to manage resources on.
password
required
The password for the user account used to connect to the BIG-IP. You can omit this option if the environment variable F5_PASSWORD is set.

aliases: pass, pwd
port
Specifies the port for the trap destination.
provider
(added in 2.5)
Default:
None
A dict object containing connection details.
ssh_keyfile
Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
timeout Default:
10
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
server
required
The BIG-IP host. You can omit this option if the environment variable F5_SERVER is set.
user
required
The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You can omit this option if the environment variable F5_USER is set.
server_port Default:
443
The BIG-IP server port. You can omit this option if the environment variable F5_SERVER_PORT is set.
password
required
The password for the user account used to connect to the BIG-IP. You can omit this option if the environment variable F5_PASSWORD is set.

aliases: pass, pwd
validate_certs
    Choices:
  • no
  • yes
If no, SSL certificates will not be validated. Use this only on personally controlled sites using self-signed certificates. You can omit this option if the environment variable F5_VALIDATE_CERTS is set.
transport
required
    Choices:
  • rest
  • cli
Configures the transport connection to use when connecting to the remote device.
server
required
The BIG-IP host. You can omit this option if the environment variable F5_SERVER is set.
server_port
(added in 2.2)
Default:
443
The BIG-IP server port. You can omit this option if the environment variable F5_SERVER_PORT is set.
snmp_version
    Choices:
  • 1
  • 2c
Specifies to which Simple Network Management Protocol (SNMP) version the trap destination applies.
state
    Choices:
  • present
  • absent
When present, ensures that the cloud connector exists. When absent, ensures that the cloud connector does not exist.
user
required
The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You can omit this option if the environment variable F5_USER is set.
validate_certs
(added in 2.0)
    Choices:
  • no
  • yes
If no, SSL certificates will not be validated. Use this only on personally controlled sites using self-signed certificates. You can omit this option if the environment variable F5_VALIDATE_CERTS is set.

Notes

Note

  • This module only supports version v1 and v2c of SNMP.
  • The network option is not supported on versions of BIG-IP < 12.1.0 because the platform did not support that option until 12.1.0. If used on versions < 12.1.0, it will simply be ignored.
  • For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
  • Requires the f5-sdk Python package on the host. This is as easy as pip install f5-sdk.

Examples

- name: Create snmp v1 trap
  bigip_snmp_trap:
    community: general
    destination: 1.2.3.4
    name: my-trap1
    network: management
    port: 9000
    snmp_version: 1
    server: lb.mydomain.com
    user: admin
    password: secret
  delegate_to: localhost

- name: Create snmp v2 trap
  bigip_snmp_trap:
    community: general
    destination: 5.6.7.8
    name: my-trap2
    network: default
    port: 7000
    snmp_version: 2c
    server: lb.mydomain.com
    user: admin
    password: secret
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
community
list
changed and success
The new community name for the trap destination.

Sample:
secret
destination
string
changed and success
The new address for the trap destination in either IP or hostname form.

Sample:
1.2.3.4
network
string
changed and success
The new name of the network the SNMP trap is on.

Sample:
management
port
string
changed and success
The new port of the trap destination.

Sample:
900
snmp_version
string
changed and success
The new snmp_version configured on the remote device.

Sample:
2c


Status

This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.

Author

  • Tim Rupp (@caphrim007)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.5/modules/bigip_snmp_trap_module.html