ios_vrf - Manage the collection of VRF definitions on Cisco IOS devices

New in version 2.3.

Synopsis

  • This module provides declarative management of VRF definitions on Cisco IOS devices. It allows playbooks to manage individual or the entire VRF collection. It also supports purging VRF definitions from the configuration that are not explicitly defined.

Parameters

Parameter Choices/Defaults Comments
associated_interfaces
(added in 2.5)
This is a intent option and checks the operational state of the for given vrf name for associated interfaces. If the value in the associated_interfaces does not match with the operational state of vrf interfaces on device it will result in failure.
auth_pass Default:
none
Deprecated
Starting with Ansible 2.5 we recommend using connection: network_cli and become: yes with become_pass.
For more information please see the IOS Platform Options guide.
Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.
authorize
    Choices:
  • yes
  • no
Deprecated
Starting with Ansible 2.5 we recommend using connection: network_cli and become: yes.
For more information please see the IOS Platform Options guide.
Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.
delay
(added in 2.4)
Default:
10
Time in seconds to wait before checking for the operational state on remote device.
description
Provides a short description of the VRF definition in the current active configuration. The VRF definition value accepts alphanumeric characters used to provide additional information about the VRF.
interfaces
Identifies the set of interfaces that should be configured in the VRF. Interfaces must be routed interfaces in order to be placed into a VRF.
name
The name of the VRF definition to be managed on the remote IOS device. The VRF definition name is an ASCII string name used to uniquely identify the VRF. This argument is mutually exclusive with the vrfs argument
provider Default:
None
Deprecated
Starting with Ansible 2.5 we recommend using connection: network_cli.
For more information please see the IOS Platform Options guide.
A dict object containing connection details.
username
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
authorize
    Choices:
  • yes
  • no
Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.
ssh_keyfile
Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
auth_pass Default:
none
Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.
host
required
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
timeout Default:
10
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
password Default:
None
Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
port Default:
22
Specifies the port to use when building the connection to the remote device.
purge Default:
no
Instructs the module to consider the VRF definition absolute. It will remove any previously configured VRFs on the device.
rd
The router-distinguisher value uniquely identifies the VRF to routing processes on the remote IOS system. The RD value takes the form of A:B where A and B are both numeric values.
route_both
(added in 2.5)
Adds an export and import list of extended route target communities to the VRF.
route_export
(added in 2.5)
Adds an export list of extended route target communities to the VRF.
route_import
(added in 2.5)
Adds an import list of extended route target communities to the VRF.
state
    Choices:
  • present
  • absent
Configures the state of the VRF definition as it relates to the device operational configuration. When set to present, the VRF should be configured in the device active configuration and when set to absent the VRF should not be in the device active configuration
vrfs
The set of VRF definition objects to be configured on the remote IOS device. Ths list entries can either be the VRF name or a hash of VRF definitions and attributes. This argument is mutually exclusive with the name argument.

Notes

Note

Examples

- name: configure a vrf named management
  ios_vrf:
    name: management
    description: oob mgmt vrf
    interfaces:
      - Management1

- name: remove a vrf named test
  ios_vrf:
    name: test
    state: absent

- name: configure set of VRFs and purge any others
  ios_vrf:
    vrfs:
      - red
      - blue
      - green
    purge: yes

- name: Creates a list of import RTs for the VRF with the same parameters
  ios_vrf:
    name: test_import
    rd: 1:100
    route_import:
      - 1:100
      - 3:100

- name: Creates a list of export RTs for the VRF with the same parameters
  ios_vrf:
    name: test_export
    rd: 1:100
    route_export:
      - 1:100
      - 3:100

- name: Creates a list of import and export route targets for the VRF with the same parameters
  ios_vrf:
    name: test_both
    rd: 1:100
    route_both:
      - 1:100
      - 3:100

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
commands
list
always
The list of configuration mode commands to send to the device

Sample:
['vrf definition ansible', 'description management vrf', {'rd': '1:100'}]
delta
str
always
The time elapsed to perform all operations

Sample:
0:00:10.469466
end
str
always
The time the job ended

Sample:
2016-11-16 10:38:25.595612
start
str
always
The time the job started

Sample:
2016-11-16 10:38:15.126146


Status

This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.

Support

For more information about Red Hat’s support of this module, please refer to this Knowledge Base article

Author

  • Peter Sprygada (@privateip)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.5/modules/ios_vrf_module.html