eos_vlan - Manage VLANs on Arista EOS network devices

New in version 2.4.

Synopsis

  • This module provides declarative management of VLANs on Arista EOS network devices.

Parameters

Parameter Choices/Defaults Comments
aggregate
List of VLANs definitions.
associated_interfaces
(added in 2.5)
This is a intent option and checks the operational state of the for given vlan name for associated interfaces. The name of interface is case sensitive and should be in expanded format and not abbreviated. If the value in the associated_interfaces does not match with the operational state of vlan interfaces on device it will result in failure.
auth_pass Default:
none
Deprecated
Starting with Ansible 2.5 we recommend using connection: network_cli and become: yes with become_pass.
This option is only required if you are using eAPI.
For more information please see the EOS Platform Options guide.
Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.
authorize
    Choices:
  • yes
  • no
Deprecated
Starting with Ansible 2.5 we recommend using connection: network_cli and become: yes.
This option is only required if you are using eAPI.
For more information please see the EOS Platform Options guide.
Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.
delay Default:
10
Delay the play should wait to check for declarative intent params values.
interfaces
List of interfaces that should be associated to the VLAN. The name of interface is case sensitive and should be in expanded format and not abbreviated.
name
Name of the VLAN.
provider Default:
None
Deprecated
Starting with Ansible 2.5 we recommend using connection: network_cli.
This option is only required if you are using eAPI.
For more information please see the EOS Platform Options guide.
A dict object containing connection details.
username
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the eAPI authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
authorize
    Choices:
  • yes
  • no
Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.
ssh_keyfile
Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
use_proxy
(added in 2.5)
    Choices:
  • yes
  • no
If no, the environment variables http_proxy and https_proxy will be ignored.
auth_pass Default:
none
Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.
host
required
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
timeout Default:
10
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
use_ssl
    Choices:
  • yes
  • no
Configures the transport to use SSL if set to true only when the transport=eapi. If the transport argument is not eapi, this value is ignored.
password Default:
None
Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or eapi transports. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
validate_certs
    Choices:
  • yes
  • no
If no, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not eapi, this value is ignored.
port Default:
0 (use common port)
Specifies the port to use when building the connection to the remote device. This value applies to either cli or eapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).
transport
required
    Choices:
  • eapi
  • cli
Configures the transport connection to use when connecting to the remote device.
purge Default:
no
Purge VLANs not defined in the aggregate parameter.
state
    Choices:
  • present
  • absent
  • active
  • suspend
State of the VLAN configuration.
vlan_id
required
ID of the VLAN.

Notes

Note

Examples

- name: Create vlan
  eos_vlan:
    vlan_id: 4000
    name: vlan-4000
    state: present

- name: Add interfaces to vlan
  eos_vlan:
    vlan_id: 4000
    state: present
    interfaces:
      - Ethernet1
      - Ethernet2

- name: Check if interfaces is assigned to vlan
  eos_vlan:
    vlan_id: 4000
    associated_interfaces:
      - Ethernet1
      - Ethernet2

- name: Suspend vlan
  eos_vlan:
    vlan_id: 4000
    state: suspend

- name: Unsuspend vlan
  eos_vlan:
    vlan_id: 4000
    state: active

- name: Create aggregate of vlans
  eos_vlan:
    aggregate:
      - vlan_id: 4000
      - {vlan_id: 4001, name: vlan-4001}

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
commands
list
always
The list of configuration mode commands to send to the device

Sample:
['vlan 20', 'name test-vlan']


Status

This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.

Support

For more information about Red Hat’s support of this module, please refer to this Knowledge Base article

Author

  • Ricardo Carrillo Cruz (@rcarrillocruz)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.5/modules/eos_vlan_module.html