nxos_hsrp - Manages HSRP configuration on NX-OS switches.

New in version 2.2.

Synopsis

  • Manages HSRP configuration on NX-OS switches.

Parameters

Parameter Choices/Defaults Comments
auth_string
Authentication string. If this needs to be hidden(for md5 type), the string should be 7 followed by the key string. Otherwise, it can be 0 followed by key string or just key string (for backward compatibility). For text type, this should be just be a key string. if this is 'default', authentication is removed.
auth_type
    Choices:
  • text
  • md5
Authentication type.
group
required
HSRP group number.
interface
required
Full name of interface that is being managed for HSRP.
preempt
    Choices:
  • enabled
  • disabled
Enable/Disable preempt.
priority
HSRP priority or keyword 'default'.
provider Default:
None
Deprecated
Starting with Ansible 2.5 we recommend using connection: network_cli.
This option is only required if you are using NX-API.
For more information please see the NXOS Platform Options guide.
A dict object containing connection details.
username
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
authorize
(added in 2.5.3)
    Choices:
  • no
  • yes
Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.
ssh_keyfile
Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
use_proxy
(added in 2.5)
    Choices:
  • yes
  • no
If no, the environment variables http_proxy and https_proxy will be ignored.
auth_pass
(added in 2.5.3)
Default:
none
Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.
host
required
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
timeout
(added in 2.3)
Default:
10
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc).
use_ssl
    Choices:
  • yes
  • no
Configures the transport to use SSL if set to true only when the transport=nxapi, otherwise this value is ignored.
password Default:
None
Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
validate_certs
    Choices:
  • yes
  • no
Default:
None
If no, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored.
port Default:
0 (use common port)
Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).
transport
required
Default:
cli
Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi.
state
    Choices:
  • present
  • absent
Specify desired state of the resource.
version
    Choices:
  • 1
  • 2
Default:
1
HSRP version.
vip
HSRP virtual IP address or keyword 'default'

Notes

Note

  • Tested against NXOSv 7.3.(0)D1(1) on VIRL
  • HSRP feature needs to be enabled first on the system.
  • SVIs must exist before using this module.
  • Interface must be a L3 port before using this module.
  • HSRP cannot be configured on loopback interfaces.
  • MD5 authentication is only possible with HSRPv2 while it is ignored if HSRPv1 is used instead, while it will not raise any error. Here we allow MD5 authentication only with HSRPv2 in order to enforce better practice.
  • For information on using CLI and NX-API see the NXOS Platform Options guide
  • For more information on using Ansible to manage network devices see the Ansible Network Guide
  • For more information on using Ansible to manage Cisco devices see the Cisco integration page.

Examples

- name: Ensure HSRP is configured with following params on a SVI
  nxos_hsrp:
    group: 10
    vip: 10.1.1.1
    priority: 150
    interface: vlan10
    preempt: enabled
    host: 68.170.147.165

- name: Ensure HSRP is configured with following params on a SVI
        with clear text authentication
  nxos_hsrp:
    group: 10
    vip: 10.1.1.1
    priority: 150
    interface: vlan10
    preempt: enabled
    host: 68.170.147.165
    auth_type: text
    auth_string: CISCO

- name: Ensure HSRP is configured with md5 authentication and clear
        authentication string
  nxos_hsrp:
    group: 10
    vip: 10.1.1.1
    priority: 150
    interface: vlan10
    preempt: enabled
    host: 68.170.147.165
    auth_type: md5
    auth_string: "0 1234"

- name: Ensure HSRP is configured with md5 authentication and hidden
        authentication string
  nxos_hsrp:
    group: 10
    vip: 10.1.1.1
    priority: 150
    interface: vlan10
    preempt: enabled
    host: 68.170.147.165
    auth_type: md5
    auth_string: "7 1234"

- name: Remove HSRP config for given interface, group, and VIP
  nxos_hsrp:
    group: 10
    interface: vlan10
    vip: 10.1.1.1
    host: 68.170.147.165
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
commands
list
always
commands sent to the device

Sample:
['interface vlan10', 'hsrp version 2', 'hsrp 30', 'ip 10.30.1.1']


Status

This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.

Support

For more information about Red Hat’s support of this module, please refer to this Knowledge Base article

Author

  • Jason Edelman (@jedelman8)
  • Gabriele Gerbino (@GGabriele)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.5/modules/nxos_hsrp_module.html