ios_linkagg - Manage link aggregation groups on Cisco IOS network devices

Synopsis

  • This module provides declarative management of link aggregation groups on Cisco IOS network devices.

Parameters

Parameter Choices/Defaults Comments
aggregate
List of link aggregation definitions.
auth_pass Default:
none
Deprecated
Starting with Ansible 2.5 we recommend using connection: network_cli and become: yes with become_pass.
For more information please see the IOS Platform Options guide.
Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.
authorize
    Choices:
  • yes
  • no
Deprecated
Starting with Ansible 2.5 we recommend using connection: network_cli and become: yes.
For more information please see the IOS Platform Options guide.
Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.
group
Channel-group number for the port-channel Link aggregation group. Range 1-255.
members
List of members of the link aggregation group.
mode
    Choices:
  • active
  • on
  • passive
  • auto
  • desirable
Mode of the link aggregation group.
provider Default:
None
Deprecated
Starting with Ansible 2.5 we recommend using connection: network_cli.
For more information please see the IOS Platform Options guide.
A dict object containing connection details.
username
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
authorize
    Choices:
  • yes
  • no
Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.
ssh_keyfile
Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
auth_pass Default:
none
Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.
host
required
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
timeout Default:
10
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
password Default:
None
Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
port Default:
22
Specifies the port to use when building the connection to the remote device.
purge Default:
no
Purge links not defined in the aggregate parameter.
state
    Choices:
  • present
  • absent
State of the link aggregation group.

Notes

Note

Examples

- name: create link aggregation group
  ios_linkagg:
    group: 10
    state: present

- name: delete link aggregation group
  ios_linkagg:
    group: 10
    state: absent

- name: set link aggregation group to members
  ios_linkagg:
    group: 200
    mode: active
    members:
      - GigabitEthernet0/0
      - GigabitEthernet0/1

- name: remove link aggregation group from GigabitEthernet0/0
  ios_linkagg:
    group: 200
    mode: active
    members:
      - GigabitEthernet0/1

- name: Create aggregate of linkagg definitions
  ios_linkagg:
    aggregate:
      - { group: 3, mode: on, members: [GigabitEthernet0/1] }
      - { group: 100, mode: passive, members: [GigabitEthernet0/2] }

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
commands
list
always, except for the platforms that use Netconf transport to manage the device.
The list of configuration mode commands to send to the device

Sample:
['interface port-channel 30', 'interface GigabitEthernet0/3', 'channel-group 30 mode on', 'no interface port-channel 30']


Status

This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.

Support

For more information about Red Hat’s support of this module, please refer to this Knowledge Base article

Author

  • Trishna Guha (@trishnaguha)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.5/modules/ios_linkagg_module.html