cisco.nxos.nxos_acl – (deprecated, removed after 2022-06-01) Manages access list entries for ACLs.

Note

This plugin is part of the cisco.nxos collection (version 1.3.1).

To install it use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_acl.

New in version 1.0.0: of cisco.nxos

DEPRECATED

Removed in

major release after 2022-06-01

Why

Updated modules released with more functionality

Alternative

nxos_acls

Synopsis

  • Manages access list entries for ACLs.

Note

This module has a corresponding action plugin.

Parameters

Parameter Choices/Defaults Comments
ack
string
    Choices:
  • enable
Match on the ACK bit.
action
string
    Choices:
  • permit
  • deny
  • remark
Action of the ACE.
dest
string
Destination ip and mask using IP/MASK notation and supports the keyword 'any'.
dest_port1
string
Port/protocol and also first (lower) port when using range operand.
dest_port2
string
Second (end) port when using range operand.
dest_port_op
string
    Choices:
  • any
  • eq
  • gt
  • lt
  • neq
  • range
Destination port operands such as eq, neq, gt, lt, range.
dscp
string
    Choices:
  • af11
  • af12
  • af13
  • af21
  • af22
  • af23
  • af31
  • af32
  • af33
  • af41
  • af42
  • af43
  • cs1
  • cs2
  • cs3
  • cs4
  • cs5
  • cs6
  • cs7
  • default
  • ef
Match packets with given dscp value.
established
string
    Choices:
  • enable
Match established connections.
fin
string
    Choices:
  • enable
Match on the FIN bit.
fragments
string
    Choices:
  • enable
Check non-initial fragments.
log
string
    Choices:
  • enable
Log matches against this entry.
name
string / required
Case sensitive name of the access list (ACL).
precedence
string
    Choices:
  • critical
  • flash
  • flash-override
  • immediate
  • internet
  • network
  • priority
  • routine
Match packets with given precedence.
proto
string
Port number or protocol (as supported by the switch).
provider
dictionary
Deprecated
Starting with Ansible 2.5 we recommend using connection: network_cli.
Starting with Ansible 2.6 we recommend using connection: httpapi for NX-API.
This option will be removed in a release after 2022-06-01.
For more information please see the NXOS Platform Options guide.
A dict object containing connection details.
auth_pass
string
Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.
authorize
boolean
    Choices:
  • no ←
  • yes
Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.
host
string
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
password
string
Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
port
integer
Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).
ssh_keyfile
string
Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
timeout
integer
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc).
transport
string
    Choices:
  • cli ←
  • nxapi
Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi.
use_proxy
boolean
    Choices:
  • no
  • yes ←
If no, the environment variables http_proxy and https_proxy will be ignored.
use_ssl
boolean
    Choices:
  • no ←
  • yes
Configures the transport to use SSL if set to yes only when the transport=nxapi, otherwise this value is ignored.
username
string
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
validate_certs
boolean
    Choices:
  • no ←
  • yes
If no, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored.
psh
string
    Choices:
  • enable
Match on the PSH bit.
remark
string
If action is set to remark, this is the description.
rst
string
    Choices:
  • enable
Match on the RST bit.
seq
string
Sequence number of the entry (ACE).
src
string
Source ip and mask using IP/MASK notation and supports keyword 'any'.
src_port1
string
Port/protocol and also first (lower) port when using range operand.
src_port2
string
Second (end) port when using range operand.
src_port_op
string
    Choices:
  • any
  • eq
  • gt
  • lt
  • neq
  • range
Source port operands such as eq, neq, gt, lt, range.
state
string
    Choices:
  • present ←
  • absent
  • delete_acl
Specify desired state of the resource.
syn
string
    Choices:
  • enable
Match on the SYN bit.
time_range
string
Name of time-range to apply.
urg
string
    Choices:
  • enable
Match on the URG bit.

Notes

Note

  • Tested against NXOSv 7.3.(0)D1(1) on VIRL
  • state=absent removes the ACE if it exists.
  • state=delete_acl deletes the ACL if it exists.
  • For idempotency, use port numbers for the src/dest port params like src_port1 and names for the well defined protocols for the proto param.
  • Although this module is idempotent in that if the ace as presented in the task is identical to the one on the switch, no changes will be made. If there is any difference, what is in Ansible will be pushed (configured options will be overridden). This is to improve security, but at the same time remember an ACE is removed, then re-added, so if there is a change, the new ACE will be exactly what parameters you are sending to the module.
  • For information on using CLI and NX-API see the NXOS Platform Options guide
  • For more information on using Ansible to manage network devices see the Ansible Network Guide
  • For more information on using Ansible to manage Cisco devices see the Cisco integration page.

Examples

# configure ACL ANSIBLE
- cisco.nxos.nxos_acl:
    name: ANSIBLE
    seq: 10
    action: permit
    proto: tcp
    src: 192.0.2.1/24
    dest: any
    state: present

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
commands
list / elements=string
always
commands sent to the device

Sample:
['ip access-list ANSIBLE', '10 permit tcp 192.0.2.1/24 any']


Status

  • This module will be removed in a major release after 2022-06-01. [deprecated]
  • For more information see DEPRECATED.

Authors

  • Jason Edelman (@jedelman8)
  • Gabriele Gerbino (@GGabriele)

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/cisco/nxos/nxos_acl_module.html