community.network.ce_bgp – Manages BGP configuration on HUAWEI CloudEngine switches.

Note

This plugin is part of the community.network collection (version 1.3.0).

To install it use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.ce_bgp.

Synopsis

  • Manages BGP configurations on HUAWEI CloudEngine switches.

Parameters

Parameter Choices/Defaults Comments
as_number
string
Local AS number. The value is a string of 1 to 11 characters.
as_path_limit
string
Maximum number of AS numbers in the AS_Path attribute. The default value is 255.
bgp_rid_auto_sel
string
    Choices:
  • no_use ←
  • true
  • false
The function to automatically select router IDs for all VPN BGP instances is enabled.
check_first_as
string
    Choices:
  • no_use ←
  • true
  • false
Check the first AS in the AS_Path of the update messages from EBGP peers.
clear_interval
string
Clear interval.
confed_id_number
string
Confederation ID. The value is a string of 1 to 11 characters.
confed_nonstanded
string
    Choices:
  • no_use ←
  • true
  • false
Configure the device to be compatible with devices in a nonstandard confederation.
confed_peer_as_num
string
Confederation AS number, in two-byte or four-byte format. The value is a string of 1 to 11 characters.
conn_retry_time
string
ConnectRetry interval. The value is an integer, in seconds. The default value is 32s.
default_af_type
string
    Choices:
  • ipv4uni
  • ipv6uni
Type of a created address family, which can be IPv4 unicast or IPv6 unicast. The default type is IPv4 unicast.
ebgp_if_sensitive
string
    Choices:
  • no_use ←
  • true
  • false
If the value is true, After the fast EBGP interface awareness function is enabled, EBGP sessions on an interface are deleted immediately when the interface goes Down. If the value is false, After the fast EBGP interface awareness function is enabled, EBGP sessions on an interface are not deleted immediately when the interface goes Down.
gr_peer_reset
string
    Choices:
  • no_use ←
  • true
  • false
Peer disconnection through GR.
graceful_restart
string
    Choices:
  • no_use ←
  • true
  • false
Enable GR of the BGP speaker in the specified address family, peer address, or peer group.
hold_interval
string
Hold interval.
hold_time
string
Hold time, in seconds. The value of the hold time can be 0 or range from 3 to 65535.
is_shutdown
string
    Choices:
  • no_use ←
  • true
  • false
Interrupt BGP all neighbor.
keep_all_routes
string
    Choices:
  • no_use ←
  • true
  • false
If the value is true, the system stores all route update messages received from all peers (groups) after BGP connection setup. If the value is false, the system stores only BGP update messages that are received from peers and pass the configured import policy.
keepalive_time
string
If the value of a timer changes, the BGP peer relationship between the routers is disconnected. The value is an integer ranging from 0 to 21845. The default value is 60.
memory_limit
string
    Choices:
  • no_use ←
  • true
  • false
Support BGP RIB memory protection.
min_hold_time
string
Min hold time, in seconds. The value of the hold time can be 0 or range from 20 to 65535.
router_id
string
ID of a router that is in IPv4 address format.
state
string
    Choices:
  • present ←
  • absent
Specify desired state of the resource.
suppress_interval
string
Suppress interval.
time_wait_for_rib
string
Period of waiting for the End-Of-RIB flag. The value is an integer ranging from 3 to 3000. The default value is 600.
vrf_name
string
Name of a BGP instance. The name is a case-sensitive string of characters.
vrf_rid_auto_sel
string
    Choices:
  • no_use ←
  • true
  • false
If the value is true, VPN BGP instances are enabled to automatically select router IDs. If the value is false, VPN BGP instances are disabled from automatically selecting router IDs.

Notes

Note

  • This module requires the netconf system service be enabled on the remote device being managed.
  • Recommended connection is netconf.
  • This module also works with local connections for legacy playbooks.

Examples

- name: CloudEngine BGP test
  hosts: cloudengine
  connection: local
  gather_facts: no
  vars:
    cli:
      host: "{{ inventory_hostname }}"
      port: "{{ ansible_ssh_port }}"
      username: "{{ username }}"
      password: "{{ password }}"
      transport: cli

  tasks:

  - name: "Enable BGP"
    community.network.ce_bgp:
      state: present
      as_number: 100
      confed_id_number: 250
      provider: "{{ cli }}"

  - name: "Disable BGP"
    community.network.ce_bgp:
      state: absent
      as_number: 100
      confed_id_number: 250
      provider: "{{ cli }}"

  - name: "Create confederation peer AS num"
    community.network.ce_bgp:
      state: present
      confed_peer_as_num: 260
      provider: "{{ cli }}"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
changed
boolean
always
check to see if a change was made on the device

Sample:
True
end_state
dictionary
always
k/v pairs of aaa params after module execution

Sample:
{'bgp_enable': [['100'], ['true']]}
existing
dictionary
always
k/v pairs of existing aaa server

Sample:
{'bgp_enable': [['100'], ['true']]}
proposed
dictionary
always
k/v pairs of parameters passed into module

Sample:
{'as_number': '100', 'state"': 'present'}
updates
list / elements=string
always
command sent to the device

Sample:
['bgp 100']


Authors

  • wangdezhuang (@QijunPan)

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/community/network/ce_bgp_module.html