bigip_firewall_log_profile_network – Configures Network Firewall related settings of the log profile - Ansible 2.10 Documentation

Note

This plugin is part of the f5networks.f5_modules collection (version 1.6.0).

To install it use: ansible-galaxy collection install f5networks.f5_modules.

To use it in a playbook, specify: f5networks.f5_modules.bigip_firewall_log_profile_network.

New in version 1.0.0: of f5networks.f5_modules

Synopsis
Parameters
Notes
Examples
Return Values

Synopsis

Configures Network Firewall related settings of the log profile.

Parameters

Parameter		Choices/Defaults	Comments
log_format_delimiter string			Specifies the delimiter string when using a `log_storage_format` of `field-list`. When creating a new profile, if this parameter is not specified, the default value of `,` (the comma character) is used. This option is valid when the `log_storage_format` is set to `field-list`. It is ignored otherwise. Depending on the delimiter used, it may be necessary to wrap the delimiter in quotes to prevent YAML errors from occurring. The special character `$` is reserved for internal use, and will raise an error if used. The maximum length allowed for this parameter is `31` characters.
log_ip_errors dictionary			Modifies log settings for logging of IP error packets.
	enabled boolean	Choices: no yes	This option enables or disables the logging of IP error packets.
	rate_limit integer		This option sets rate limits for the logging of IP error packets. This option is effective only if logging of this message type is enabled.
log_matches_accept_rule dictionary			Modifies log settings for ACL rules configured with an "accept" or "accept decisively" action.
	enabled boolean	Choices: no yes	This option enables or disables the logging of packets that match ACL rules configured with an "accept" or "accept decisively" action.
	rate_limit integer		This option sets rate limits for the logging of packets that match ACL rules configured with an "accept" or "accept decisively" action. This option is effective only if logging of this message type is enabled.
log_matches_drop_rule dictionary			Modifies log settings for ACL rules configured with a drop action.
	enabled boolean	Choices: no yes	This option enables or disables the logging of packets that match ACL rules configured with a drop action.
	rate_limit integer		This option sets rate limits for the logging of packets that match ACL rules configured with a drop action. This option is effective only if logging of this message type is enabled.
log_matches_reject_rule dictionary			Modifies log settings for ACL rules configured with a reject action.
	enabled boolean	Choices: no yes	This option enables or disables the logging of packets that match ACL rules configured with a reject action.
	rate_limit integer		This option sets rate limits for the logging of packets that match ACL rules configured with a reject action. This option is effective only if logging of this message type is enabled.
log_message_fields list / elements=string		Choices: acl_policy_name acl_policy_type acl_rule_name action bigip_hostname context_name context_type date_time dest_fqdn dest_geo dest_ip dest_port drop_reason management_ip_address protocol route_domain sa_translation_pool sa_translation_type source_fqdn source_user src_geo src_ip src_port translated_dest_ip translated_dest_port translated_ip_protocol translated_route_domain translated_src_ip translated_src_port translated_vlan vlan	Specifies a set of fields to be logged. This option is valid when the `log_storage_format` is set to `field-list`. It is ignored otherwise. The order of the list is important, as the server displays the selected traffic items in the log sequentially according to it.
log_publisher string			Specifies the name of the log publisher used for Network events. To specify the log_publisher on a different partition from the AFM log profile, specify the name in fullpath format, e.g. `/Foobar/log-publisher`, otherwise the partition for the log publisher is inferred from the `partition` module parameter.
log_storage_format string		Choices: field-list none	Specifies the type of the storage format. When creating a new log profile, if this parameter is not specified, the default is `none`. When `field-list`, specifies the log displays only the items you specify in the `log_message_fields` list with `log_format_delimiter` as the delimiter between the items. When `none`, the messages will be logged in the default format, which is "management_ip_address", "bigip_hostname","context_type", "context_name","src_geo","src_ip", "dest_geo","dest_ip","src_port", "dest_port","vlan","protocol","route_domain", "translated_src_ip", "translated_dest_ip", "translated_src_port","translated_dest_port", "translated_vlan","translated_ip_protocol", "translated_route_domain", "acl_policy_type", "acl_policy_name","acl_rule_name","action", "drop_reason","sa_translation_type", "sa_translation_pool","flow_id", "source_user", "source_fqdn","dest_fqdn".
log_tcp_errors dictionary			Modifies log settings for the logging of TCP error packets.
	enabled boolean	Choices: no yes	This option enables or disables the logging of TCP error packets.
	rate_limit integer		This option sets rate limits for the logging of TCP error packets. This option is effective only if logging of this message type is enabled.
log_tcp_events dictionary			Modifies the log settings for logging of TCP events on the client side.
	enabled boolean	Choices: no yes	This option enables or disables the logging of TCP events on the client side. Only Established and Closed states of a TCP session are logged if this option is enabled.
	rate_limit integer		This option sets rate limits for the logging of TCP events on the client side. This option is effective only if logging of this message type is enabled.
log_translation_fields boolean		Choices: no yes	This option enables or disables the logging of translated (i.e server side) fields in ACL match and TCP events. Translated fields include (but are not limited to) source address/port, destination address/port, IP protocol, route domain, and VLAN.
partition string		Default: "Common"	Device partition to create log profile on. This parameter is also used when specifying names for log publishers, unless log publisher names are in fullpath format.
profile_name string / required			Specifies the name of the AFM (Advanced Firewall Manager) log profile to be updated.
provider dictionary added in 1.0.0 of f5networks.f5_modules			A dict object containing connection details.
	auth_provider string		Configures the auth provider for to obtain authentication tokens from the remote device. This option is really used when working with BIG-IQ devices.
	no_f5_teem boolean	Choices: no yes	If `yes`, TEEM telemetry data is not sent to F5. You may omit this option by setting the environment variable `F5_TEEM`.
	password string / required		The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable `F5_PASSWORD`. aliases: pass, pwd
	server string / required		The BIG-IP host. You may omit this option by setting the environment variable `F5_SERVER`.
	server_port integer	Default: 443	The BIG-IP server port. You may omit this option by setting the environment variable `F5_SERVER_PORT`.
	timeout integer		Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
	transport string	Choices: rest ←	Configures the transport connection to use when connecting to the remote device.
	user string / required		The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable `F5_USER`.
	validate_certs boolean	Choices: no yes ←	If `no`, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable `F5_VALIDATE_CERTS`.
rate_limit string			Defines a rate limit for all combined network firewall log messages per second. Beyond this rate limit, log messages are not logged. To specify an indefinite rate, use the value `indefinite`. If specifying a numeric rate, the value must be between `1` and `4294967295`.
state string		Choices: present ← absent	When `state` is `present`, ensures the resource exists. The only built-in profile that allows updating network log settings is global-network, attempts to do so on other built-in profiles will be ignored. When `state` is `absent`, ensures that the resource is removed. The `absent` state is ignored for global-network log profile.

Notes

Note

For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
Requires BIG-IP software version >= 12.
The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the f5networks.f5_modules.bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples

- name: Add network settings to log profile
  bigip_firewall_log_profile_network:
    profile_name: barbaz
    rate_limit: 150000
    log_publisher: local-db-pub
    log_tcp_errors:
      enabled: yes
      rate_limit: 10000
    log_tcp_events:
      enabled: yes
      rate_limit: 40000
    log_storage_format: "field-list"
    log_message_fields:
      - vlan
      - translated_vlan
      - src_ip
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Change delimiter and log fields
  bigip_firewall_log_profile_network:
    profile_name: barbaz
    log_format_delimiter: '.'
    log_message_fields:
      - translated_dest_ip
      - translated_dest_port
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Modify built-in profile
  bigip_firewall_log_profile_network:
    profile_name: "global-network"
    log_publisher: "/foobar/log1"
    log_ip_errors:
      enabled: yes
      rate_limit: 60000
    log_matches_reject_rule:
      enabled: yes
      rate_limit: 2000
    log_translation_fields: yes
    log_storage_format: "field-list"
    log_format_delimiter: '.'
    log_message_fields:
      - protocol
      - dest_ip
      - dest_port
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Remove custom log profile network log settings
  bigip_firewall_log_profile_network:
    profile_name: "{{ log_profile }}"
    state: absent
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key		Returned	Description
log_format_delimiter string		changed	The delimiter string when using a log_storage_format of field-list. Sample: .
log_ip_errors complex		changed	Log settings for logging of IP error packets. Sample: hash/dictionary of values
	enabled boolean	changed	Enable or disable the logging of IP error packets. Sample: True
	rate_limit string	changed	The rate limit for the logging of IP error packets. Sample: indefinite
log_matches_accept_rule complex		changed	Log settings for ACL rules configured with an "accept" or "accept decisively" action. Sample: hash/dictionary of values
	enabled boolean	changed	Enable or disable the logging of packets that match ACL rules. Sample: True
	rate_limit string	changed	The rate limit for the logging of packets that match ACL rules. Sample: indefinite
log_matches_drop_rule complex		changed	Log settings for ACL rules configured with a drop action. Sample: hash/dictionary of values
	enabled boolean	changed	Enable or disable the logging of packets that match ACL rules. Sample: True
	rate_limit string	changed	The rate limit for the logging of packets that match ACL rules. Sample: indefinite
log_matches_reject_rule complex		changed	Log settings for ACL rules configured with a reject action. Sample: hash/dictionary of values
	enabled boolean	changed	Enable or disable the logging of packets that match ACL rules. Sample: True
	rate_limit string	changed	The rate limit for the logging of packets that match ACL rules. Sample: indefinite
log_message_fields list / elements=string		changed	The delimiter string when using a log_storage_format of field-list. Sample: ['acl_policy_name', 'acl_policy_type']
log_publisher string		changed	The name of the log publisher used for Network events. Sample: /Common/log-publisher
log_storage_format string		changed	The type of the storage format. Sample: field-list
log_tcp_errors complex		changed	Log settings for logging of TCP error packets. Sample: hash/dictionary of values
	enabled boolean	changed	Enable or disable the logging of TCP error packets. Sample: True
	rate_limit string	changed	The rate limit for the logging of TCP error packets. Sample: indefinite
log_tcp_events complex		changed	Log settings for logging of TCP events on the client side. Sample: hash/dictionary of values
	enabled boolean	changed	Enable or disable the logging of TCP events on the client side. Sample: True
	rate_limit string	changed	The rate limit for the logging of TCP events on the client side. Sample: indefinite
log_translation_fields boolean		changed	Enable or disable the logging of translated (i.e server side) fields in ACL match and TCP events. Sample: True
rate_limit string		changed	The rate limit for all combined network firewall log messages per second. Sample: indefinite

Authors

Wojciech Wypior (@wojtek0806)

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/f5networks/f5_modules/bigip_firewall_log_profile_network_module.html