community.network.ce_ospf_vrf – Manages configuration of an OSPF VPN instance on HUAWEI CloudEngine switches.

Note

This plugin is part of the community.network collection (version 1.3.0).

To install it use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.ce_ospf_vrf.

Synopsis

  • Manages configuration of an OSPF VPN instance on HUAWEI CloudEngine switches.

Parameters

Parameter Choices/Defaults Comments
bandwidth
string
Specifies the reference bandwidth used to assign ospf cost. Valid values are an integer, in Mbps, 1 - 2147483648, the default value is 100.
description
string
Specifies the description information of ospf process.
lsaaholdinterval
string
Specifies the hold interval of arrive LSA when use the intelligent timer. Valid value is an integer, in millisecond, from 0 to 10000, the default value is 500.
lsaainterval
string
Specifies the interval of arrive LSA when use the general timer. Valid value is an integer, in millisecond, from 0 to 10000.
lsaalflag
boolean
    Choices:
  • no ←
  • yes
Specifies the mode of timer to calculate interval of arrive LSA. If set the parameter but not specifies value, the default will be used. If true use general timer. If false use intelligent timer.
lsaamaxinterval
string
Specifies the max interval of arrive LSA when use the intelligent timer. Valid value is an integer, in millisecond, from 0 to 10000, the default value is 1000.
lsaastartinterval
string
Specifies the start interval of arrive LSA when use the intelligent timer. Valid value is an integer, in millisecond, from 0 to 10000, the default value is 500.
lsaoholdinterval
string
Specifies the hold interval of originate LSA . Valid value is an integer, in millisecond, from 0 to 5000, the default value is 1000.
lsaointerval
string
Specifies the interval of originate LSA . Valid value is an integer, in second, from 0 to 10, the default value is 5.
lsaointervalflag
boolean
    Choices:
  • no ←
  • yes
Specifies whether cancel the interval of LSA originate or not. If set the parameter but noe specifies value, the default will be used. true:cancel the interval of LSA originate, the interval is 0. false:do not cancel the interval of LSA originate.
lsaomaxinterval
string
Specifies the max interval of originate LSA . Valid value is an integer, in millisecond, from 1 to 10000, the default value is 5000.
lsaostartinterval
string
Specifies the start interval of originate LSA . Valid value is an integer, in millisecond, from 0 to 1000, the default value is 500.
ospf
string / required
The ID of the ospf process. Valid values are an integer, 1 - 4294967295, the default value is 1.
route_id
string
Specifies the ospf private route id,. Valid values are a string, formatted as an IP address (i.e. "10.1.1.1") the length is 0 - 20.
spfholdinterval
string
Specifies the hold interval to calculate SPF when use intelligent timer. Valid value is an integer, in millisecond, from 1 to 5000, the default value is 200.
spfinterval
string
Specifies the interval to calculate SPF when use second level timer. Valid value is an integer, in second, from 1 to 10.
spfintervalmi
string
Specifies the interval to calculate SPF when use millisecond level timer. Valid value is an integer, in millisecond, from 1 to 10000.
spfintervaltype
string
    Choices:
  • intelligent-timer ←
  • timer
  • millisecond
Specifies the mode of timer which used to calculate SPF. If set the parameter but noe specifies value, the default will be used. If is intelligent-timer, then use intelligent timer. If is timer, then use second level timer. If is millisecond, then use millisecond level timer.
spfmaxinterval
string
Specifies the max interval to calculate SPF when use intelligent timer. Valid value is an integer, in millisecond, from 1 to 20000, the default value is 5000.
spfstartinterval
string
Specifies the start interval to calculate SPF when use intelligent timer. Valid value is an integer, in millisecond, from 1 to 1000, the default value is 50.
state
string
    Choices:
  • present ←
  • absent
Specify desired state of the resource.
vrf
string
Default:
"_public_"
Specifies the vpn instance which use ospf,length is 1 - 31. Valid values are a string.

Notes

Note

  • This module requires the netconf system service be enabled on the remote device being managed.
  • Recommended connection is netconf.
  • This module also works with local connections for legacy playbooks.

Examples

- name: Ospf vrf module test
  hosts: cloudengine
  connection: local
  gather_facts: no
  vars:
    cli:
      host: "{{ inventory_hostname }}"
      port: "{{ ansible_ssh_port }}"
      username: "{{ username }}"
      password: "{{ password }}"
      transport: cli

  tasks:

  - name: Configure ospf route id
    community.network.ce_ospf_vrf:
      ospf: 2
      route_id: 2.2.2.2
      lsaointervalflag: False
      lsaointerval: 2
      provider: "{{ cli }}"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
changed
boolean
always
check to see if a change was made on the device
end_state
dictionary
verbose mode
k/v pairs of configuration after module execution

Sample:
{'bandwidthReference': '100', 'description': None, 'lsaArrivalFlag': 'false', 'lsaArrivalHoldInterval': '500', 'lsaArrivalInterval': None, 'lsaArrivalMaxInterval': '1000', 'lsaArrivalStartInterval': '500', 'lsaOriginateHoldInterval': '1000', 'lsaOriginateInterval': '2', 'lsaOriginateIntervalFlag': 'false', 'lsaOriginateMaxInterval': '5000', 'lsaOriginateStartInterval': '500', 'processId': '2', 'routerId': '2.2.2.2', 'spfScheduleHoldInterval': '1000', 'spfScheduleInterval': None, 'spfScheduleIntervalMillisecond': None, 'spfScheduleIntervalType': 'intelligent-timer', 'spfScheduleMaxInterval': '10000', 'spfScheduleStartInterval': '500', 'vrfName': '_public_'}
existing
dictionary
verbose mode
k/v pairs of existing configuration

Sample:
{'bandwidthReference': '100', 'description': None, 'lsaArrivalFlag': 'false', 'lsaArrivalHoldInterval': '500', 'lsaArrivalInterval': None, 'lsaArrivalMaxInterval': '1000', 'lsaArrivalStartInterval': '500', 'lsaOriginateHoldInterval': '1000', 'lsaOriginateInterval': '2', 'lsaOriginateIntervalFlag': 'false', 'lsaOriginateMaxInterval': '5000', 'lsaOriginateStartInterval': '500', 'processId': '2', 'routerId': '2.2.2.2', 'spfScheduleHoldInterval': '1000', 'spfScheduleInterval': None, 'spfScheduleIntervalMillisecond': None, 'spfScheduleIntervalType': 'intelligent-timer', 'spfScheduleMaxInterval': '10000', 'spfScheduleStartInterval': '500', 'vrfName': '_public_'}
proposed
dictionary
verbose mode
k/v pairs of parameters passed into module

Sample:
{'bandwidth': '100', 'description': None, 'lsaaholdinterval': '500', 'lsaainterval': None, 'lsaalflag': 'False', 'lsaamaxinterval': '1000', 'lsaastartinterval': '500', 'lsaoholdinterval': '1000', 'lsaointerval': '2', 'lsaointervalflag': 'False', 'lsaomaxinterval': '5000', 'lsaostartinterval': '500', 'process_id': '2', 'route_id': '2.2.2.2', 'spfholdinterval': '1000', 'spfinterval': None, 'spfintervalmi': None, 'spfintervaltype': 'intelligent-timer', 'spfmaxinterval': '10000', 'spfstartinterval': '500', 'vrf': '_public_'}
updates
list / elements=string
always
commands sent to the device

Sample:
['ospf 2']


Authors

  • Yang yang (@QijunPan)

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/community/network/ce_ospf_vrf_module.html