community.network.pn_igmp_snooping – CLI command to modify igmp-snooping

Note

This plugin is part of the community.network collection (version 1.3.0).

To install it use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.pn_igmp_snooping.

Synopsis

  • This module can be used to modify Internet Group Management Protocol (IGMP) snooping.

Parameters

Parameter Choices/Defaults Comments
pn_cliswitch
string
Target switch to run the CLI on.
pn_enable
boolean
    Choices:
  • no
  • yes
enable or disable IGMP snooping.
pn_enable_vlans
string
enable per VLAN IGMP snooping.
pn_igmpv2_vlans
string
VLANs on which to use IGMPv2 protocol.
pn_igmpv3_vlans
string
VLANs on which to use IGMPv3 protocol.
pn_no_snoop_linklocal_vlans
string
Remove snooping of link-local groups(224.0.0.0/24) on these vlans.
pn_query_interval
string
IGMP query interval in seconds.
pn_query_max_response_time
string
maximum response time, in seconds, advertised in IGMP queries.
pn_scope
string
    Choices:
  • local
  • fabric
IGMP snooping scope - fabric or local.
pn_snoop_linklocal_vlans
string
Allow snooping of link-local groups(224.0.0.0/24) on these vlans.
pn_vxlan
boolean
    Choices:
  • no
  • yes
enable or disable IGMP snooping on vxlans.
state
string / required
    Choices:
  • update
State the action to perform. Use update to modify the igmp-snooping.

Examples

- name: 'Modify IGMP Snooping'
  community.network.pn_igmp_snooping:
    pn_cliswitch: 'sw01'
    state: 'update'
    pn_vxlan: True
    pn_enable_vlans: '1-399,401-4092'
    pn_no_snoop_linklocal_vlans: 'none'
    pn_igmpv3_vlans: '1-399,401-4092'

- name: 'Modify IGMP Snooping'
  community.network.pn_igmp_snooping:
    pn_cliswitch: 'sw01'
    state: 'update'
    pn_vxlan: False
    pn_enable_vlans: '1-399'
    pn_no_snoop_linklocal_vlans: 'none'
    pn_igmpv3_vlans: '1-399'

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
changed
boolean
always
indicates whether the CLI caused changes on the target.
command
string
always
the CLI command run on the target node.
stderr
list / elements=string
on error
set of error responses from the igmp-snooping command.
stdout
list / elements=string
always
set of responses from the igmp-snooping command.


Authors

  • Pluribus Networks (@rajaspachipulusu17)

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/community/network/pn_igmp_snooping_module.html