bigip_gtm_facts – Collect facts from F5 BIG-IP GTM devices

New in version 2.3.

DEPRECATED

Removed in Ansible:
version: 2.11
Why: The bigip_gtm_facts module is an outlier as all facts are being collected in the bigip_device_facts module. Additionally, the bigip_device_facts module is easier to maintain and use.
Alternative: bigip_device_facts

Synopsis

  • Collect facts from F5 BIG-IP GTM devices.

Parameters

Parameter Choices/Defaults Comments
filter
-
Perform regex filter of response. Filtering is done on the name of the resource. Valid filters are anything that can be provided to Python's re module.
include
- / required
    Choices:
  • pool
  • wide_ip
  • server
Fact category to collect.
password
string / required
The password for the user account used to connect to the BIG-IP.
You may omit this option by setting the environment variable F5_PASSWORD.

aliases: pass, pwd
provider
dictionary
added in 2.5
A dict object containing connection details.
password
string / required
The password for the user account used to connect to the BIG-IP.
You may omit this option by setting the environment variable F5_PASSWORD.

aliases: pass, pwd
server
string / required
The BIG-IP host.
You may omit this option by setting the environment variable F5_SERVER.
server_port
integer
Default:
443
The BIG-IP server port.
You may omit this option by setting the environment variable F5_SERVER_PORT.
ssh_keyfile
path
Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports.
You may omit this option by setting the environment variable ANSIBLE_NET_SSH_KEYFILE.
timeout
integer
Default:
10
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
transport
string
    Choices:
  • cli
  • rest
Configures the transport connection to use when connecting to the remote device.
user
string / required
The username to connect to the BIG-IP with. This user must have administrative privileges on the device.
You may omit this option by setting the environment variable F5_USER.
validate_certs
boolean
    Choices:
  • no
  • yes
If no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates.
You may omit this option by setting the environment variable F5_VALIDATE_CERTS.
server
string / required
The BIG-IP host.
You may omit this option by setting the environment variable F5_SERVER.
server_port
integer
added in 2.2
Default:
443
The BIG-IP server port.
You may omit this option by setting the environment variable F5_SERVER_PORT.
user
string / required
The username to connect to the BIG-IP with. This user must have administrative privileges on the device.
You may omit this option by setting the environment variable F5_USER.
validate_certs
boolean
added in 2.0
    Choices:
  • no
  • yes
If no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates.
You may omit this option by setting the environment variable F5_VALIDATE_CERTS.

Notes

Note

  • This module is deprecated. Use the bigip_device_facts module instead.
  • For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
  • Requires BIG-IP software version >= 12.
  • The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples

- name: Get pool facts
  bigip_gtm_facts:
    server: lb.mydomain.com
    user: admin
    password: secret
    include: pool
    filter: my_pool
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
pool
list
changed
Contains the pool object status and enabled status.

Sample:
{'pool': [{'alternate_mode': 'round-robin', 'dynamic_ratio': 'disabled', 'enabled': True, 'fallback_mode': 'return-to-dns', 'full_path': '/Common/d3qw', 'load_balancing_mode': 'round-robin', 'manual_resume': 'disabled', 'max_answers_returned': 1, 'members': [{'disabled': True, 'flags': 'a', 'full_path': 'ok3.com', 'member_order': 0, 'name': 'ok3.com', 'order': 10, 'preference': 10, 'ratio': 1, 'service': 80}], 'name': 'd3qw', 'partition': 'Common', 'qos_hit_ratio': 5, 'qos_hops': 0, 'qos_kilobytes_second': 3, 'qos_lcs': 30, 'qos_packet_rate': 1, 'qos_rtt': 50, 'qos_topology': 0, 'qos_vs_capacity': 0, 'qos_vs_score': 0, 'availability_state': 'offline', 'enabled_state': 'disabled', 'ttl': 30, 'type': 'naptr', 'verify_member_availability': 'disabled'}]}
server
list
changed
Contains the virtual server enabled and availability status, and address.

Sample:
{'server': [{'addresses': [{'device_name': '/Common/qweqwe', 'name': '10.10.10.10', 'translation': 'none'}], 'datacenter': '/Common/xfxgh', 'enabled': True, 'expose_route_domains': False, 'full_path': '/Common/qweqwe', 'iq_allow_path': True, 'iq_allow_service_check': True, 'iq_allow_snmp': True, 'limit_cpu_usage': 0, 'limit_cpu_usage_status': 'disabled', 'limit_max_bps': 0, 'limit_max_bps_status': 'disabled', 'limit_max_connections': 0, 'limit_max_connections_status': 'disabled', 'limit_max_pps': 0, 'limit_max_pps_status': 'disabled', 'limit_mem_avail': 0, 'limit_mem_avail_status': 'disabled', 'link_discovery': 'disabled', 'monitor': '/Common/bigip', 'name': 'qweqwe', 'partition': 'Common', 'product': 'single-bigip', 'virtual_server_discovery': 'disabled', 'virtual_servers': [{'destination': '10.10.10.10:0', 'enabled': True, 'full_path': 'jsdfhsd', 'limit_max_bps': 0, 'limit_max_bps_status': 'disabled', 'limit_max_connections': 0, 'limit_max_connections_status': 'disabled', 'limit_max_pps': 0, 'limit_max_pps_status': 'disabled', 'name': 'jsdfhsd', 'translation_address': 'none', 'translation_port': 0}]}]}
wide_ip
list
changed
Contains the lb method for the wide ip and the pools that are within the wide ip.

Sample:
{'wide_ip': [{'enabled': True, 'failure_rcode': 'noerror', 'failure_rcode_response': 'disabled', 'failure_rcode_ttl': 0, 'full_path': '/Common/foo.ok.com', 'last_resort_pool': '', 'minimal_response': 'enabled', 'name': 'foo.ok.com', 'partition': 'Common', 'persist_cidr_ipv4': 32, 'persist_cidr_ipv6': 128, 'persistence': 'disabled', 'pool_lb_mode': 'round-robin', 'pools': [{'name': 'd3qw', 'order': 0, 'partition': 'Common', 'ratio': 1}], 'ttl_persistence': 3600, 'type': 'naptr'}]}


Status

  • This module will be removed in version 2.11. [deprecated]
  • For more information see DEPRECATED.

Authors

  • Tim Rupp (@caphrim007)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/bigip_gtm_facts_module.html