ce_bfd_view – Manages BFD session view configuration on HUAWEI CloudEngine devices

New in version 2.4.

Synopsis

  • Manages BFD session view configuration on HUAWEI CloudEngine devices.

Parameters

Parameter Choices/Defaults Comments
admin_down
boolean
    Choices:
  • no
  • yes
Enables the BFD session to enter the AdminDown state. By default, a BFD session is enabled. The default value is bool type.
description
-
Specifies the description of a BFD session. The value is a string of 1 to 51 case-sensitive characters with spaces.
detect_multi
-
Specifies the local detection multiplier of a BFD session. The value is an integer that ranges from 3 to 50.
local_discr
-
Specifies the local discriminator of a BFD session. The value is an integer that ranges from 1 to 16384.
min_rx_interval
-
Specifies the minimum interval for sending BFD packets. The value is an integer that ranges from 50 to 1000, in milliseconds.
min_tx_interval
-
Specifies the minimum interval for receiving BFD packets. The value is an integer that ranges from 50 to 1000, in milliseconds.
provider
-
A dict object containing connection details.
host
string / required
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
password
string
Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for cli transports. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
port
integer
Default:
"0 (use common port)"
Specifies the port to use when building the connection to the remote device. This value applies to either cli or netconf. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, netconf=22).
ssh_keyfile
path
Specifies the SSH key to use to authenticate the connection to the remote device. This argument is used for the cli transport. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
transport
string / required
    Choices:
  • cli
  • netconf
Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh).
username
string
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the CLI login. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
remote_discr
-
Specifies the remote discriminator of a BFD session. The value is an integer that ranges from 1 to 4294967295.
session_name
- / required
Specifies the name of a BFD session. The value is a string of 1 to 15 case-sensitive characters without spaces.
state
-
    Choices:
  • present
  • absent
Determines whether the config should be present or not on the device.
tos_exp
-
Specifies a priority for BFD control packets. The value is an integer ranging from 0 to 7. The default value is 7, which is the highest priority.
wtr_interval
-
Specifies the WTR time of a BFD session. The value is an integer that ranges from 1 to 60, in minutes. The default value is 0.

Notes

Note

  • This module requires the netconf system service be enabled on the remote device being managed.
  • Recommended connection is netconf.
  • This module also works with local connections for legacy playbooks.

Examples

- name: bfd view module test
  hosts: cloudengine
  connection: local
  gather_facts: no
  vars:
    cli:
      host: "{{ inventory_hostname }}"
      port: "{{ ansible_ssh_port }}"
      username: "{{ username }}"
      password: "{{ password }}"
      transport: cli

  tasks:
  - name: Set the local discriminator of a BFD session to 80 and the remote discriminator to 800
    ce_bfd_view:
      session_name: atob
      local_discr: 80
      remote_discr: 800
      state: present
      provider: '{{ cli }}'

  - name: Set the minimum interval for receiving BFD packets to 500 ms
    ce_bfd_view:
      session_name: atob
      min_rx_interval: 500
      state: present
      provider: '{{ cli }}'

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
changed
boolean
always
check to see if a change was made on the device

Sample:
True
end_state
dictionary
always
k/v pairs of configuration after module execution

Sample:
{'session': {'adminDown': 'false', 'createType': 'SESS_STATIC', 'description': None, 'detectMulti': '3', 'localDiscr': '80', 'minRxInt': None, 'minTxInt': None, 'remoteDiscr': '800', 'sessName': 'atob', 'tosExp': None, 'wtrTimerInt': None}}
existing
dictionary
always
k/v pairs of existing configuration

Sample:
{'session': {'adminDown': 'false', 'createType': 'SESS_STATIC', 'description': None, 'detectMulti': '3', 'localDiscr': None, 'minRxInt': None, 'minTxInt': None, 'remoteDiscr': None, 'sessName': 'atob', 'tosExp': None, 'wtrTimerInt': None}}
proposed
dictionary
always
k/v pairs of parameters passed into module

Sample:
{'admin_down': False, 'description': None, 'detect_multi': None, 'local_discr': 80, 'min_rx_interval': None, 'min_tx_interval': None, 'remote_discr': 800, 'session_name': 'atob', 'state': 'present', 'tos_exp': None, 'wtr_interval': None}
updates
list
always
commands sent to the device

Sample:
['bfd atob', 'discriminator local 80', 'discriminator remote 800']


Status

Authors

  • QijunPan (@QijunPan)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/ce_bfd_view_module.html