fortios_router_bgp – Configure BGP in Fortinet’s FortiOS and FortiGate

New in version 2.8.

Synopsis

  • This module is able to configure a FortiGate or FortiOS by allowing the user to set and modify router feature and bgp category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.2

Requirements

The below requirements are needed on the host that executes this module.

  • fortiosapi>=0.9.8

Parameters

Parameter Choices/Defaults Comments
host
- / required
FortiOS or FortiGate ip address.
https
boolean
    Choices:
  • no
  • yes
Indicates if the requests towards FortiGate must use HTTPS protocol
password
-
Default:
""
FortiOS or FortiGate password.
router_bgp
-
Default:
null
Configure BGP.
admin-distance
-
Administrative distance modifications.
distance
-
Administrative distance to apply (1 - 255).
id
- / required
ID.
neighbour-prefix
-
Neighbor address prefix.
route-list
-
Access list of routes to apply new distance to. Source router.access-list.name.
aggregate-address
-
BGP aggregate address table.
as-set
-
    Choices:
  • enable
  • disable
Enable/disable generate AS set path information.
id
- / required
ID.
prefix
-
Aggregate prefix.
summary-only
-
    Choices:
  • enable
  • disable
Enable/disable filter more specific routes from updates.
aggregate-address6
-
BGP IPv6 aggregate address table.
as-set
-
    Choices:
  • enable
  • disable
Enable/disable generate AS set path information.
id
- / required
ID.
prefix6
-
Aggregate IPv6 prefix.
summary-only
-
    Choices:
  • enable
  • disable
Enable/disable filter more specific routes from updates.
always-compare-med
-
    Choices:
  • enable
  • disable
Enable/disable always compare MED.
as
-
Router AS number, valid from 1 to 4294967295, 0 to disable BGP.
bestpath-as-path-ignore
-
    Choices:
  • enable
  • disable
Enable/disable ignore AS path.
bestpath-cmp-confed-aspath
-
    Choices:
  • enable
  • disable
Enable/disable compare federation AS path length.
bestpath-cmp-routerid
-
    Choices:
  • enable
  • disable
Enable/disable compare router ID for identical EBGP paths.
bestpath-med-confed
-
    Choices:
  • enable
  • disable
Enable/disable compare MED among confederation paths.
bestpath-med-missing-as-worst
-
    Choices:
  • enable
  • disable
Enable/disable treat missing MED as least preferred.
client-to-client-reflection
-
    Choices:
  • enable
  • disable
Enable/disable client-to-client route reflection.
cluster-id
-
Route reflector cluster ID.
confederation-identifier
-
Confederation identifier.
confederation-peers
-
Confederation peers.
peer
- / required
Peer ID.
dampening
-
    Choices:
  • enable
  • disable
Enable/disable route-flap dampening.
dampening-max-suppress-time
-
Maximum minutes a route can be suppressed.
dampening-reachability-half-life
-
Reachability half-life time for penalty (min).
dampening-reuse
-
Threshold to reuse routes.
dampening-route-map
-
Criteria for dampening. Source router.route-map.name.
dampening-suppress
-
Threshold to suppress routes.
dampening-unreachability-half-life
-
Unreachability half-life time for penalty (min).
default-local-preference
-
Default local preference.
deterministic-med
-
    Choices:
  • enable
  • disable
Enable/disable enforce deterministic comparison of MED.
distance-external
-
Distance for routes external to the AS.
distance-internal
-
Distance for routes internal to the AS.
distance-local
-
Distance for routes local to the AS.
ebgp-multipath
-
    Choices:
  • enable
  • disable
Enable/disable EBGP multi-path.
enforce-first-as
-
    Choices:
  • enable
  • disable
Enable/disable enforce first AS for EBGP routes.
fast-external-failover
-
    Choices:
  • enable
  • disable
Enable/disable reset peer BGP session if link goes down.
graceful-end-on-timer
-
    Choices:
  • enable
  • disable
Enable/disable to exit graceful restart on timer only.
graceful-restart
-
    Choices:
  • enable
  • disable
Enable/disable BGP graceful restart capabilities.
graceful-restart-time
-
Time needed for neighbors to restart (sec).
graceful-stalepath-time
-
Time to hold stale paths of restarting neighbor (sec).
graceful-update-delay
-
Route advertisement/selection delay after restart (sec).
holdtime-timer
-
Number of seconds to mark peer as dead.
ibgp-multipath
-
    Choices:
  • enable
  • disable
Enable/disable IBGP multi-path.
ignore-optional-capability
-
    Choices:
  • enable
  • disable
Don't send unknown optional capability notification message
keepalive-timer
-
Frequency to send keep alive requests.
log-neighbour-changes
-
    Choices:
  • enable
  • disable
Enable logging of BGP neighbour's changes
neighbor
-
BGP neighbor table.
activate
-
    Choices:
  • enable
  • disable
Enable/disable address family IPv4 for this neighbor.
activate6
-
    Choices:
  • enable
  • disable
Enable/disable address family IPv6 for this neighbor.
advertisement-interval
-
Minimum interval (sec) between sending updates.
allowas-in
-
IPv4 The maximum number of occurrence of my AS number allowed.
allowas-in-enable
-
    Choices:
  • enable
  • disable
Enable/disable IPv4 Enable to allow my AS in AS path.
allowas-in-enable6
-
    Choices:
  • enable
  • disable
Enable/disable IPv6 Enable to allow my AS in AS path.
allowas-in6
-
IPv6 The maximum number of occurrence of my AS number allowed.
as-override
-
    Choices:
  • enable
  • disable
Enable/disable replace peer AS with own AS for IPv4.
as-override6
-
    Choices:
  • enable
  • disable
Enable/disable replace peer AS with own AS for IPv6.
attribute-unchanged
-
    Choices:
  • as-path
  • med
  • next-hop
IPv4 List of attributes that should be unchanged.
attribute-unchanged6
-
    Choices:
  • as-path
  • med
  • next-hop
IPv6 List of attributes that should be unchanged.
bfd
-
    Choices:
  • enable
  • disable
Enable/disable BFD for this neighbor.
capability-default-originate
-
    Choices:
  • enable
  • disable
Enable/disable advertise default IPv4 route to this neighbor.
capability-default-originate6
-
    Choices:
  • enable
  • disable
Enable/disable advertise default IPv6 route to this neighbor.
capability-dynamic
-
    Choices:
  • enable
  • disable
Enable/disable advertise dynamic capability to this neighbor.
capability-graceful-restart
-
    Choices:
  • enable
  • disable
Enable/disable advertise IPv4 graceful restart capability to this neighbor.
capability-graceful-restart6
-
    Choices:
  • enable
  • disable
Enable/disable advertise IPv6 graceful restart capability to this neighbor.
capability-orf
-
    Choices:
  • none
  • receive
  • send
  • both
Accept/Send IPv4 ORF lists to/from this neighbor.
capability-orf6
-
    Choices:
  • none
  • receive
  • send
  • both
Accept/Send IPv6 ORF lists to/from this neighbor.
capability-route-refresh
-
    Choices:
  • enable
  • disable
Enable/disable advertise route refresh capability to this neighbor.
conditional-advertise
-
Conditional advertisement.
advertise-routemap
- / required
Name of advertising route map. Source router.route-map.name.
condition-routemap
-
Name of condition route map. Source router.route-map.name.
condition-type
-
    Choices:
  • exist
  • non-exist
Type of condition.
connect-timer
-
Interval (sec) for connect timer.
default-originate-routemap
-
Route map to specify criteria to originate IPv4 default. Source router.route-map.name.
default-originate-routemap6
-
Route map to specify criteria to originate IPv6 default. Source router.route-map.name.
description
-
Description.
distribute-list-in
-
Filter for IPv4 updates from this neighbor. Source router.access-list.name.
distribute-list-in6
-
Filter for IPv6 updates from this neighbor. Source router.access-list6.name.
distribute-list-out
-
Filter for IPv4 updates to this neighbor. Source router.access-list.name.
distribute-list-out6
-
Filter for IPv6 updates to this neighbor. Source router.access-list6.name.
dont-capability-negotiate
-
    Choices:
  • enable
  • disable
Don't negotiate capabilities with this neighbor
ebgp-enforce-multihop
-
    Choices:
  • enable
  • disable
Enable/disable allow multi-hop EBGP neighbors.
ebgp-multihop-ttl
-
EBGP multihop TTL for this peer.
filter-list-in
-
BGP filter for IPv4 inbound routes. Source router.aspath-list.name.
filter-list-in6
-
BGP filter for IPv6 inbound routes. Source router.aspath-list.name.
filter-list-out
-
BGP filter for IPv4 outbound routes. Source router.aspath-list.name.
filter-list-out6
-
BGP filter for IPv6 outbound routes. Source router.aspath-list.name.
holdtime-timer
-
Interval (sec) before peer considered dead.
interface
-
Interface Source system.interface.name.
ip
- / required
IP/IPv6 address of neighbor.
keep-alive-timer
-
Keep alive timer interval (sec).
link-down-failover
-
    Choices:
  • enable
  • disable
Enable/disable failover upon link down.
local-as
-
Local AS number of neighbor.
local-as-no-prepend
-
    Choices:
  • enable
  • disable
Do not prepend local-as to incoming updates.
local-as-replace-as
-
    Choices:
  • enable
  • disable
Replace real AS with local-as in outgoing updates.
maximum-prefix
-
Maximum number of IPv4 prefixes to accept from this peer.
maximum-prefix-threshold
-
Maximum IPv4 prefix threshold value (1 - 100 percent).
maximum-prefix-threshold6
-
Maximum IPv6 prefix threshold value (1 - 100 percent).
maximum-prefix-warning-only
-
    Choices:
  • enable
  • disable
Enable/disable IPv4 Only give warning message when limit is exceeded.
maximum-prefix-warning-only6
-
    Choices:
  • enable
  • disable
Enable/disable IPv6 Only give warning message when limit is exceeded.
maximum-prefix6
-
Maximum number of IPv6 prefixes to accept from this peer.
next-hop-self
-
    Choices:
  • enable
  • disable
Enable/disable IPv4 next-hop calculation for this neighbor.
next-hop-self6
-
    Choices:
  • enable
  • disable
Enable/disable IPv6 next-hop calculation for this neighbor.
override-capability
-
    Choices:
  • enable
  • disable
Enable/disable override result of capability negotiation.
passive
-
    Choices:
  • enable
  • disable
Enable/disable sending of open messages to this neighbor.
password
-
Password used in MD5 authentication.
prefix-list-in
-
IPv4 Inbound filter for updates from this neighbor. Source router.prefix-list.name.
prefix-list-in6
-
IPv6 Inbound filter for updates from this neighbor. Source router.prefix-list6.name.
prefix-list-out
-
IPv4 Outbound filter for updates to this neighbor. Source router.prefix-list.name.
prefix-list-out6
-
IPv6 Outbound filter for updates to this neighbor. Source router.prefix-list6.name.
remote-as
-
AS number of neighbor.
remove-private-as
-
    Choices:
  • enable
  • disable
Enable/disable remove private AS number from IPv4 outbound updates.
remove-private-as6
-
    Choices:
  • enable
  • disable
Enable/disable remove private AS number from IPv6 outbound updates.
restart-time
-
Graceful restart delay time (sec, 0 = global default).
retain-stale-time
-
Time to retain stale routes.
route-map-in
-
IPv4 Inbound route map filter. Source router.route-map.name.
route-map-in6
-
IPv6 Inbound route map filter. Source router.route-map.name.
route-map-out
-
IPv4 Outbound route map filter. Source router.route-map.name.
route-map-out6
-
IPv6 Outbound route map filter. Source router.route-map.name.
route-reflector-client
-
    Choices:
  • enable
  • disable
Enable/disable IPv4 AS route reflector client.
route-reflector-client6
-
    Choices:
  • enable
  • disable
Enable/disable IPv6 AS route reflector client.
route-server-client
-
    Choices:
  • enable
  • disable
Enable/disable IPv4 AS route server client.
route-server-client6
-
    Choices:
  • enable
  • disable
Enable/disable IPv6 AS route server client.
send-community
-
    Choices:
  • standard
  • extended
  • both
  • disable
IPv4 Send community attribute to neighbor.
send-community6
-
    Choices:
  • standard
  • extended
  • both
  • disable
IPv6 Send community attribute to neighbor.
shutdown
-
    Choices:
  • enable
  • disable
Enable/disable shutdown this neighbor.
soft-reconfiguration
-
    Choices:
  • enable
  • disable
Enable/disable allow IPv4 inbound soft reconfiguration.
soft-reconfiguration6
-
    Choices:
  • enable
  • disable
Enable/disable allow IPv6 inbound soft reconfiguration.
stale-route
-
    Choices:
  • enable
  • disable
Enable/disable stale route after neighbor down.
strict-capability-match
-
    Choices:
  • enable
  • disable
Enable/disable strict capability matching.
unsuppress-map
-
IPv4 Route map to selectively unsuppress suppressed routes. Source router.route-map.name.
unsuppress-map6
-
IPv6 Route map to selectively unsuppress suppressed routes. Source router.route-map.name.
update-source
-
Interface to use as source IP/IPv6 address of TCP connections. Source system.interface.name.
weight
-
Neighbor weight.
neighbor-group
-
BGP neighbor group table.
activate
-
    Choices:
  • enable
  • disable
Enable/disable address family IPv4 for this neighbor.
activate6
-
    Choices:
  • enable
  • disable
Enable/disable address family IPv6 for this neighbor.
advertisement-interval
-
Minimum interval (sec) between sending updates.
allowas-in
-
IPv4 The maximum number of occurrence of my AS number allowed.
allowas-in-enable
-
    Choices:
  • enable
  • disable
Enable/disable IPv4 Enable to allow my AS in AS path.
allowas-in-enable6
-
    Choices:
  • enable
  • disable
Enable/disable IPv6 Enable to allow my AS in AS path.
allowas-in6
-
IPv6 The maximum number of occurrence of my AS number allowed.
as-override
-
    Choices:
  • enable
  • disable
Enable/disable replace peer AS with own AS for IPv4.
as-override6
-
    Choices:
  • enable
  • disable
Enable/disable replace peer AS with own AS for IPv6.
attribute-unchanged
-
    Choices:
  • as-path
  • med
  • next-hop
IPv4 List of attributes that should be unchanged.
attribute-unchanged6
-
    Choices:
  • as-path
  • med
  • next-hop
IPv6 List of attributes that should be unchanged.
bfd
-
    Choices:
  • enable
  • disable
Enable/disable BFD for this neighbor.
capability-default-originate
-
    Choices:
  • enable
  • disable
Enable/disable advertise default IPv4 route to this neighbor.
capability-default-originate6
-
    Choices:
  • enable
  • disable
Enable/disable advertise default IPv6 route to this neighbor.
capability-dynamic
-
    Choices:
  • enable
  • disable
Enable/disable advertise dynamic capability to this neighbor.
capability-graceful-restart
-
    Choices:
  • enable
  • disable
Enable/disable advertise IPv4 graceful restart capability to this neighbor.
capability-graceful-restart6
-
    Choices:
  • enable
  • disable
Enable/disable advertise IPv6 graceful restart capability to this neighbor.
capability-orf
-
    Choices:
  • none
  • receive
  • send
  • both
Accept/Send IPv4 ORF lists to/from this neighbor.
capability-orf6
-
    Choices:
  • none
  • receive
  • send
  • both
Accept/Send IPv6 ORF lists to/from this neighbor.
capability-route-refresh
-
    Choices:
  • enable
  • disable
Enable/disable advertise route refresh capability to this neighbor.
connect-timer
-
Interval (sec) for connect timer.
default-originate-routemap
-
Route map to specify criteria to originate IPv4 default. Source router.route-map.name.
default-originate-routemap6
-
Route map to specify criteria to originate IPv6 default. Source router.route-map.name.
description
-
Description.
distribute-list-in
-
Filter for IPv4 updates from this neighbor. Source router.access-list.name.
distribute-list-in6
-
Filter for IPv6 updates from this neighbor. Source router.access-list6.name.
distribute-list-out
-
Filter for IPv4 updates to this neighbor. Source router.access-list.name.
distribute-list-out6
-
Filter for IPv6 updates to this neighbor. Source router.access-list6.name.
dont-capability-negotiate
-
    Choices:
  • enable
  • disable
Don't negotiate capabilities with this neighbor
ebgp-enforce-multihop
-
    Choices:
  • enable
  • disable
Enable/disable allow multi-hop EBGP neighbors.
ebgp-multihop-ttl
-
EBGP multihop TTL for this peer.
filter-list-in
-
BGP filter for IPv4 inbound routes. Source router.aspath-list.name.
filter-list-in6
-
BGP filter for IPv6 inbound routes. Source router.aspath-list.name.
filter-list-out
-
BGP filter for IPv4 outbound routes. Source router.aspath-list.name.
filter-list-out6
-
BGP filter for IPv6 outbound routes. Source router.aspath-list.name.
holdtime-timer
-
Interval (sec) before peer considered dead.
interface
-
Interface Source system.interface.name.
keep-alive-timer
-
Keep alive timer interval (sec).
link-down-failover
-
    Choices:
  • enable
  • disable
Enable/disable failover upon link down.
local-as
-
Local AS number of neighbor.
local-as-no-prepend
-
    Choices:
  • enable
  • disable
Do not prepend local-as to incoming updates.
local-as-replace-as
-
    Choices:
  • enable
  • disable
Replace real AS with local-as in outgoing updates.
maximum-prefix
-
Maximum number of IPv4 prefixes to accept from this peer.
maximum-prefix-threshold
-
Maximum IPv4 prefix threshold value (1 - 100 percent).
maximum-prefix-threshold6
-
Maximum IPv6 prefix threshold value (1 - 100 percent).
maximum-prefix-warning-only
-
    Choices:
  • enable
  • disable
Enable/disable IPv4 Only give warning message when limit is exceeded.
maximum-prefix-warning-only6
-
    Choices:
  • enable
  • disable
Enable/disable IPv6 Only give warning message when limit is exceeded.
maximum-prefix6
-
Maximum number of IPv6 prefixes to accept from this peer.
name
- / required
Neighbor group name.
next-hop-self
-
    Choices:
  • enable
  • disable
Enable/disable IPv4 next-hop calculation for this neighbor.
next-hop-self6
-
    Choices:
  • enable
  • disable
Enable/disable IPv6 next-hop calculation for this neighbor.
override-capability
-
    Choices:
  • enable
  • disable
Enable/disable override result of capability negotiation.
passive
-
    Choices:
  • enable
  • disable
Enable/disable sending of open messages to this neighbor.
prefix-list-in
-
IPv4 Inbound filter for updates from this neighbor. Source router.prefix-list.name.
prefix-list-in6
-
IPv6 Inbound filter for updates from this neighbor. Source router.prefix-list6.name.
prefix-list-out
-
IPv4 Outbound filter for updates to this neighbor. Source router.prefix-list.name.
prefix-list-out6
-
IPv6 Outbound filter for updates to this neighbor. Source router.prefix-list6.name.
remote-as
-
AS number of neighbor.
remove-private-as
-
    Choices:
  • enable
  • disable
Enable/disable remove private AS number from IPv4 outbound updates.
remove-private-as6
-
    Choices:
  • enable
  • disable
Enable/disable remove private AS number from IPv6 outbound updates.
restart-time
-
Graceful restart delay time (sec, 0 = global default).
retain-stale-time
-
Time to retain stale routes.
route-map-in
-
IPv4 Inbound route map filter. Source router.route-map.name.
route-map-in6
-
IPv6 Inbound route map filter. Source router.route-map.name.
route-map-out
-
IPv4 Outbound route map filter. Source router.route-map.name.
route-map-out6
-
IPv6 Outbound route map filter. Source router.route-map.name.
route-reflector-client
-
    Choices:
  • enable
  • disable
Enable/disable IPv4 AS route reflector client.
route-reflector-client6
-
    Choices:
  • enable
  • disable
Enable/disable IPv6 AS route reflector client.
route-server-client
-
    Choices:
  • enable
  • disable
Enable/disable IPv4 AS route server client.
route-server-client6
-
    Choices:
  • enable
  • disable
Enable/disable IPv6 AS route server client.
send-community
-
    Choices:
  • standard
  • extended
  • both
  • disable
IPv4 Send community attribute to neighbor.
send-community6
-
    Choices:
  • standard
  • extended
  • both
  • disable
IPv6 Send community attribute to neighbor.
shutdown
-
    Choices:
  • enable
  • disable
Enable/disable shutdown this neighbor.
soft-reconfiguration
-
    Choices:
  • enable
  • disable
Enable/disable allow IPv4 inbound soft reconfiguration.
soft-reconfiguration6
-
    Choices:
  • enable
  • disable
Enable/disable allow IPv6 inbound soft reconfiguration.
stale-route
-
    Choices:
  • enable
  • disable
Enable/disable stale route after neighbor down.
strict-capability-match
-
    Choices:
  • enable
  • disable
Enable/disable strict capability matching.
unsuppress-map
-
IPv4 Route map to selectively unsuppress suppressed routes. Source router.route-map.name.
unsuppress-map6
-
IPv6 Route map to selectively unsuppress suppressed routes. Source router.route-map.name.
update-source
-
Interface to use as source IP/IPv6 address of TCP connections. Source system.interface.name.
weight
-
Neighbor weight.
neighbor-range
-
BGP neighbor range table.
id
- / required
Neighbor range ID.
max-neighbor-num
-
Maximum number of neighbors.
neighbor-group
-
Neighbor group name. Source router.bgp.neighbor-group.name.
prefix
-
Neighbor range prefix.
network
-
BGP network table.
backdoor
-
    Choices:
  • enable
  • disable
Enable/disable route as backdoor.
id
- / required
ID.
prefix
-
Network prefix.
route-map
-
Route map to modify generated route. Source router.route-map.name.
network-import-check
-
    Choices:
  • enable
  • disable
Enable/disable ensure BGP network route exists in IGP.
network6
-
BGP IPv6 network table.
backdoor
-
    Choices:
  • enable
  • disable
Enable/disable route as backdoor.
id
- / required
ID.
prefix6
-
Network IPv6 prefix.
route-map
-
Route map to modify generated route. Source router.route-map.name.
redistribute
-
BGP IPv4 redistribute table.
name
- / required
Distribute list entry name.
route-map
-
Route map name. Source router.route-map.name.
status
-
    Choices:
  • enable
  • disable
Status
redistribute6
-
BGP IPv6 redistribute table.
name
- / required
Distribute list entry name.
route-map
-
Route map name. Source router.route-map.name.
status
-
    Choices:
  • enable
  • disable
Status
router-id
-
Router ID.
scan-time
-
Background scanner interval (sec), 0 to disable it.
synchronization
-
    Choices:
  • enable
  • disable
Enable/disable only advertise routes from iBGP if routes present in an IGP.
username
- / required
FortiOS or FortiGate username.
vdom
-
Default:
"root"
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Notes

Note

  • Requires fortiosapi library developed by Fortinet
  • Run as a local_action in your playbook

Examples

- hosts: localhost
  vars:
   host: "192.168.122.40"
   username: "admin"
   password: ""
   vdom: "root"
  tasks:
  - name: Configure BGP.
    fortios_router_bgp:
      host:  "{{ host }}"
      username: "{{ username }}"
      password: "{{ password }}"
      vdom:  "{{ vdom }}"
      https: "False"
      router_bgp:
        admin-distance:
         -
            distance: "4"
            id:  "5"
            neighbour-prefix: "<your_own_value>"
            route-list: "<your_own_value> (source router.access-list.name)"
        aggregate-address:
         -
            as-set: "enable"
            id:  "10"
            prefix: "<your_own_value>"
            summary-only: "enable"
        aggregate-address6:
         -
            as-set: "enable"
            id:  "15"
            prefix6: "<your_own_value>"
            summary-only: "enable"
        always-compare-med: "enable"
        as: "19"
        bestpath-as-path-ignore: "enable"
        bestpath-cmp-confed-aspath: "enable"
        bestpath-cmp-routerid: "enable"
        bestpath-med-confed: "enable"
        bestpath-med-missing-as-worst: "enable"
        client-to-client-reflection: "enable"
        cluster-id: "<your_own_value>"
        confederation-identifier: "27"
        confederation-peers:
         -
            peer: "<your_own_value>"
        dampening: "enable"
        dampening-max-suppress-time: "31"
        dampening-reachability-half-life: "32"
        dampening-reuse: "33"
        dampening-route-map: "<your_own_value> (source router.route-map.name)"
        dampening-suppress: "35"
        dampening-unreachability-half-life: "36"
        default-local-preference: "37"
        deterministic-med: "enable"
        distance-external: "39"
        distance-internal: "40"
        distance-local: "41"
        ebgp-multipath: "enable"
        enforce-first-as: "enable"
        fast-external-failover: "enable"
        graceful-end-on-timer: "enable"
        graceful-restart: "enable"
        graceful-restart-time: "47"
        graceful-stalepath-time: "48"
        graceful-update-delay: "49"
        holdtime-timer: "50"
        ibgp-multipath: "enable"
        ignore-optional-capability: "enable"
        keepalive-timer: "53"
        log-neighbour-changes: "enable"
        neighbor:
         -
            activate: "enable"
            activate6: "enable"
            advertisement-interval: "58"
            allowas-in: "59"
            allowas-in-enable: "enable"
            allowas-in-enable6: "enable"
            allowas-in6: "62"
            as-override: "enable"
            as-override6: "enable"
            attribute-unchanged: "as-path"
            attribute-unchanged6: "as-path"
            bfd: "enable"
            capability-default-originate: "enable"
            capability-default-originate6: "enable"
            capability-dynamic: "enable"
            capability-graceful-restart: "enable"
            capability-graceful-restart6: "enable"
            capability-orf: "none"
            capability-orf6: "none"
            capability-route-refresh: "enable"
            conditional-advertise:
             -
                advertise-routemap: "<your_own_value> (source router.route-map.name)"
                condition-routemap: "<your_own_value> (source router.route-map.name)"
                condition-type: "exist"
            connect-timer: "80"
            default-originate-routemap: "<your_own_value> (source router.route-map.name)"
            default-originate-routemap6: "<your_own_value> (source router.route-map.name)"
            description: "<your_own_value>"
            distribute-list-in: "<your_own_value> (source router.access-list.name)"
            distribute-list-in6: "<your_own_value> (source router.access-list6.name)"
            distribute-list-out: "<your_own_value> (source router.access-list.name)"
            distribute-list-out6: "<your_own_value> (source router.access-list6.name)"
            dont-capability-negotiate: "enable"
            ebgp-enforce-multihop: "enable"
            ebgp-multihop-ttl: "90"
            filter-list-in: "<your_own_value> (source router.aspath-list.name)"
            filter-list-in6: "<your_own_value> (source router.aspath-list.name)"
            filter-list-out: "<your_own_value> (source router.aspath-list.name)"
            filter-list-out6: "<your_own_value> (source router.aspath-list.name)"
            holdtime-timer: "95"
            interface: "<your_own_value> (source system.interface.name)"
            ip: "<your_own_value>"
            keep-alive-timer: "98"
            link-down-failover: "enable"
            local-as: "100"
            local-as-no-prepend: "enable"
            local-as-replace-as: "enable"
            maximum-prefix: "103"
            maximum-prefix-threshold: "104"
            maximum-prefix-threshold6: "105"
            maximum-prefix-warning-only: "enable"
            maximum-prefix-warning-only6: "enable"
            maximum-prefix6: "108"
            next-hop-self: "enable"
            next-hop-self6: "enable"
            override-capability: "enable"
            passive: "enable"
            password: "<your_own_value>"
            prefix-list-in: "<your_own_value> (source router.prefix-list.name)"
            prefix-list-in6: "<your_own_value> (source router.prefix-list6.name)"
            prefix-list-out: "<your_own_value> (source router.prefix-list.name)"
            prefix-list-out6: "<your_own_value> (source router.prefix-list6.name)"
            remote-as: "118"
            remove-private-as: "enable"
            remove-private-as6: "enable"
            restart-time: "121"
            retain-stale-time: "122"
            route-map-in: "<your_own_value> (source router.route-map.name)"
            route-map-in6: "<your_own_value> (source router.route-map.name)"
            route-map-out: "<your_own_value> (source router.route-map.name)"
            route-map-out6: "<your_own_value> (source router.route-map.name)"
            route-reflector-client: "enable"
            route-reflector-client6: "enable"
            route-server-client: "enable"
            route-server-client6: "enable"
            send-community: "standard"
            send-community6: "standard"
            shutdown: "enable"
            soft-reconfiguration: "enable"
            soft-reconfiguration6: "enable"
            stale-route: "enable"
            strict-capability-match: "enable"
            unsuppress-map: "<your_own_value> (source router.route-map.name)"
            unsuppress-map6: "<your_own_value> (source router.route-map.name)"
            update-source: "<your_own_value> (source system.interface.name)"
            weight: "141"
        neighbor-group:
         -
            activate: "enable"
            activate6: "enable"
            advertisement-interval: "145"
            allowas-in: "146"
            allowas-in-enable: "enable"
            allowas-in-enable6: "enable"
            allowas-in6: "149"
            as-override: "enable"
            as-override6: "enable"
            attribute-unchanged: "as-path"
            attribute-unchanged6: "as-path"
            bfd: "enable"
            capability-default-originate: "enable"
            capability-default-originate6: "enable"
            capability-dynamic: "enable"
            capability-graceful-restart: "enable"
            capability-graceful-restart6: "enable"
            capability-orf: "none"
            capability-orf6: "none"
            capability-route-refresh: "enable"
            connect-timer: "163"
            default-originate-routemap: "<your_own_value> (source router.route-map.name)"
            default-originate-routemap6: "<your_own_value> (source router.route-map.name)"
            description: "<your_own_value>"
            distribute-list-in: "<your_own_value> (source router.access-list.name)"
            distribute-list-in6: "<your_own_value> (source router.access-list6.name)"
            distribute-list-out: "<your_own_value> (source router.access-list.name)"
            distribute-list-out6: "<your_own_value> (source router.access-list6.name)"
            dont-capability-negotiate: "enable"
            ebgp-enforce-multihop: "enable"
            ebgp-multihop-ttl: "173"
            filter-list-in: "<your_own_value> (source router.aspath-list.name)"
            filter-list-in6: "<your_own_value> (source router.aspath-list.name)"
            filter-list-out: "<your_own_value> (source router.aspath-list.name)"
            filter-list-out6: "<your_own_value> (source router.aspath-list.name)"
            holdtime-timer: "178"
            interface: "<your_own_value> (source system.interface.name)"
            keep-alive-timer: "180"
            link-down-failover: "enable"
            local-as: "182"
            local-as-no-prepend: "enable"
            local-as-replace-as: "enable"
            maximum-prefix: "185"
            maximum-prefix-threshold: "186"
            maximum-prefix-threshold6: "187"
            maximum-prefix-warning-only: "enable"
            maximum-prefix-warning-only6: "enable"
            maximum-prefix6: "190"
            name: "default_name_191"
            next-hop-self: "enable"
            next-hop-self6: "enable"
            override-capability: "enable"
            passive: "enable"
            prefix-list-in: "<your_own_value> (source router.prefix-list.name)"
            prefix-list-in6: "<your_own_value> (source router.prefix-list6.name)"
            prefix-list-out: "<your_own_value> (source router.prefix-list.name)"
            prefix-list-out6: "<your_own_value> (source router.prefix-list6.name)"
            remote-as: "200"
            remove-private-as: "enable"
            remove-private-as6: "enable"
            restart-time: "203"
            retain-stale-time: "204"
            route-map-in: "<your_own_value> (source router.route-map.name)"
            route-map-in6: "<your_own_value> (source router.route-map.name)"
            route-map-out: "<your_own_value> (source router.route-map.name)"
            route-map-out6: "<your_own_value> (source router.route-map.name)"
            route-reflector-client: "enable"
            route-reflector-client6: "enable"
            route-server-client: "enable"
            route-server-client6: "enable"
            send-community: "standard"
            send-community6: "standard"
            shutdown: "enable"
            soft-reconfiguration: "enable"
            soft-reconfiguration6: "enable"
            stale-route: "enable"
            strict-capability-match: "enable"
            unsuppress-map: "<your_own_value> (source router.route-map.name)"
            unsuppress-map6: "<your_own_value> (source router.route-map.name)"
            update-source: "<your_own_value> (source system.interface.name)"
            weight: "223"
        neighbor-range:
         -
            id:  "225"
            max-neighbor-num: "226"
            neighbor-group: "<your_own_value> (source router.bgp.neighbor-group.name)"
            prefix: "<your_own_value>"
        network:
         -
            backdoor: "enable"
            id:  "231"
            prefix: "<your_own_value>"
            route-map: "<your_own_value> (source router.route-map.name)"
        network-import-check: "enable"
        network6:
         -
            backdoor: "enable"
            id:  "237"
            prefix6: "<your_own_value>"
            route-map: "<your_own_value> (source router.route-map.name)"
        redistribute:
         -
            name: "default_name_241"
            route-map: "<your_own_value> (source router.route-map.name)"
            status: "enable"
        redistribute6:
         -
            name: "default_name_245"
            route-map: "<your_own_value> (source router.route-map.name)"
            status: "enable"
        router-id: "<your_own_value>"
        scan-time: "249"
        synchronization: "enable"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
build
string
always
Build number of the fortigate image

Sample:
1547
http_method
string
always
Last method used to provision the content into FortiGate

Sample:
PUT
http_status
string
always
Last result given by FortiGate on last operation applied

Sample:
200
mkey
string
success
Master key (id) used in the last call to FortiGate

Sample:
id
name
string
always
Name of the table used to fulfill the request

Sample:
urlfilter
path
string
always
Path of the table used to fulfill the request

Sample:
webfilter
revision
string
always
Internal revision number

Sample:
17.0.2.10658
serial
string
always
Serial number of the unit

Sample:
FGVMEVYYQT3AB5352
status
string
always
Indication of the operation's result

Sample:
success
vdom
string
always
Virtual domain used

Sample:
root
version
string
always
Version of the FortiGate

Sample:
v5.6.3


Status

Authors

  • Miguel Angel Munoz (@mamunozgonzalez)
  • Nicolas Thomas (@thomnico)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/fortios_router_bgp_module.html