fortios_router_multicast – Configure router multicast in Fortinet’s FortiOS and FortiGate

New in version 2.8.

Synopsis

  • This module is able to configure a FortiGate or FortiOS by allowing the user to set and modify router feature and multicast category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.2

Requirements

The below requirements are needed on the host that executes this module.

  • fortiosapi>=0.9.8

Parameters

Parameter Choices/Defaults Comments
host
- / required
FortiOS or FortiGate ip address.
https
boolean
    Choices:
  • no
  • yes
Indicates if the requests towards FortiGate must use HTTPS protocol
password
-
Default:
""
FortiOS or FortiGate password.
router_multicast
-
Default:
null
Configure router multicast.
interface
-
PIM interfaces.
bfd
-
    Choices:
  • enable
  • disable
Enable/disable Protocol Independent Multicast (PIM) Bidirectional Forwarding Detection (BFD).
cisco-exclude-genid
-
    Choices:
  • enable
  • disable
Exclude GenID from hello packets (compatibility with old Cisco IOS).
dr-priority
-
DR election priority.
hello-holdtime
-
Time before old neighbor information expires (0 - 65535 sec, default = 105).
hello-interval
-
Interval between sending PIM hello messages (0 - 65535 sec, default = 30).
igmp
-
IGMP configuration options.
access-group
-
Groups IGMP hosts are allowed to join. Source router.access-list.name.
immediate-leave-group
-
Groups to drop membership for immediately after receiving IGMPv2 leave. Source router.access-list.name.
last-member-query-count
-
Number of group specific queries before removing group (2 - 7, default = 2).
last-member-query-interval
-
Timeout between IGMPv2 leave and removing group (1 - 65535 msec, default = 1000).
query-interval
-
Interval between queries to IGMP hosts (1 - 65535 sec, default = 125).
query-max-response-time
-
Maximum time to wait for a IGMP query response (1 - 25 sec, default = 10).
query-timeout
-
Timeout between queries before becoming querier for network (60 - 900, default = 255).
router-alert-check
-
    Choices:
  • enable
  • disable
Enable/disable require IGMP packets contain router alert option.
version
-
    Choices:
  • 3
  • 2
  • 1
Maximum version of IGMP to support.
join-group
-
Join multicast groups.
address
- / required
Multicast group IP address.
multicast-flow
-
Acceptable source for multicast group. Source router.multicast-flow.name.
name
- / required
Interface name. Source system.interface.name.
neighbour-filter
-
Routers acknowledged as neighbor routers. Source router.access-list.name.
passive
-
    Choices:
  • enable
  • disable
Enable/disable listening to IGMP but not participating in PIM.
pim-mode
-
    Choices:
  • sparse-mode
  • dense-mode
PIM operation mode.
propagation-delay
-
Delay flooding packets on this interface (100 - 5000 msec, default = 500).
rp-candidate
-
    Choices:
  • enable
  • disable
Enable/disable compete to become RP in elections.
rp-candidate-group
-
Multicast groups managed by this RP. Source router.access-list.name.
rp-candidate-interval
-
RP candidate advertisement interval (1 - 16383 sec, default = 60).
rp-candidate-priority
-
Router's priority as RP.
state-refresh-interval
-
Interval between sending state-refresh packets (1 - 100 sec, default = 60).
static-group
-
Statically set multicast groups to forward out. Source router.multicast-flow.name.
ttl-threshold
-
Minimum TTL of multicast packets that will be forwarded (applied only to new multicast routes) (1 - 255, default = 1).
multicast-routing
-
    Choices:
  • enable
  • disable
Enable/disable IP multicast routing.
pim-sm-global
-
PIM sparse-mode global settings.
accept-register-list
-
Sources allowed to register packets with this Rendezvous Point (RP). Source router.access-list.name.
accept-source-list
-
Sources allowed to send multicast traffic. Source router.access-list.name.
bsr-allow-quick-refresh
-
    Choices:
  • enable
  • disable
Enable/disable accept BSR quick refresh packets from neighbors.
bsr-candidate
-
    Choices:
  • enable
  • disable
Enable/disable allowing this router to become a bootstrap router (BSR).
bsr-hash
-
BSR hash length (0 - 32, default = 10).
bsr-interface
-
Interface to advertise as candidate BSR. Source system.interface.name.
bsr-priority
-
BSR priority (0 - 255, default = 0).
cisco-crp-prefix
-
    Choices:
  • enable
  • disable
Enable/disable making candidate RP compatible with old Cisco IOS.
cisco-ignore-rp-set-priority
-
    Choices:
  • enable
  • disable
Use only hash for RP selection (compatibility with old Cisco IOS).
cisco-register-checksum
-
    Choices:
  • enable
  • disable
Checksum entire register packet(for old Cisco IOS compatibility).
cisco-register-checksum-group
-
Cisco register checksum only these groups. Source router.access-list.name.
join-prune-holdtime
-
Join/prune holdtime (1 - 65535, default = 210).
message-interval
-
Period of time between sending periodic PIM join/prune messages in seconds (1 - 65535, default = 60).
null-register-retries
-
Maximum retries of null register (1 - 20, default = 1).
register-rate-limit
-
Limit of packets/sec per source registered through this RP (0 - 65535, default = 0 which means unlimited).
register-rp-reachability
-
    Choices:
  • enable
  • disable
Enable/disable check RP is reachable before registering packets.
register-source
-
    Choices:
  • disable
  • interface
  • ip-address
Override source address in register packets.
register-source-interface
-
Override with primary interface address. Source system.interface.name.
register-source-ip
-
Override with local IP address.
register-supression
-
Period of time to honor register-stop message (1 - 65535 sec, default = 60).
rp-address
-
Statically configure RP addresses.
group
-
Groups to use this RP. Source router.access-list.name.
id
- / required
ID.
ip-address
-
RP router address.
rp-register-keepalive
-
Timeout for RP receiving data on (S,G) tree (1 - 65535 sec, default = 185).
spt-threshold
-
    Choices:
  • enable
  • disable
Enable/disable switching to source specific trees.
spt-threshold-group
-
Groups allowed to switch to source tree. Source router.access-list.name.
ssm
-
    Choices:
  • enable
  • disable
Enable/disable source specific multicast.
ssm-range
-
Groups allowed to source specific multicast. Source router.access-list.name.
route-limit
-
Maximum number of multicast routes.
route-threshold
-
Generate warnings when the number of multicast routes exceeds this number, must not be greater than route-limit.
username
- / required
FortiOS or FortiGate username.
vdom
-
Default:
"root"
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Notes

Note

  • Requires fortiosapi library developed by Fortinet
  • Run as a local_action in your playbook

Examples

- hosts: localhost
  vars:
   host: "192.168.122.40"
   username: "admin"
   password: ""
   vdom: "root"
  tasks:
  - name: Configure router multicast.
    fortios_router_multicast:
      host:  "{{ host }}"
      username: "{{ username }}"
      password: "{{ password }}"
      vdom:  "{{ vdom }}"
      https: "False"
      router_multicast:
        interface:
         -
            bfd: "enable"
            cisco-exclude-genid: "enable"
            dr-priority: "6"
            hello-holdtime: "7"
            hello-interval: "8"
            igmp:
                access-group: "<your_own_value> (source router.access-list.name)"
                immediate-leave-group: "<your_own_value> (source router.access-list.name)"
                last-member-query-count: "12"
                last-member-query-interval: "13"
                query-interval: "14"
                query-max-response-time: "15"
                query-timeout: "16"
                router-alert-check: "enable"
                version: "3"
            join-group:
             -
                address: "<your_own_value>"
            multicast-flow: "<your_own_value> (source router.multicast-flow.name)"
            name: "default_name_22 (source system.interface.name)"
            neighbour-filter: "<your_own_value> (source router.access-list.name)"
            passive: "enable"
            pim-mode: "sparse-mode"
            propagation-delay: "26"
            rp-candidate: "enable"
            rp-candidate-group: "<your_own_value> (source router.access-list.name)"
            rp-candidate-interval: "29"
            rp-candidate-priority: "30"
            state-refresh-interval: "31"
            static-group: "<your_own_value> (source router.multicast-flow.name)"
            ttl-threshold: "33"
        multicast-routing: "enable"
        pim-sm-global:
            accept-register-list: "<your_own_value> (source router.access-list.name)"
            accept-source-list: "<your_own_value> (source router.access-list.name)"
            bsr-allow-quick-refresh: "enable"
            bsr-candidate: "enable"
            bsr-hash: "40"
            bsr-interface: "<your_own_value> (source system.interface.name)"
            bsr-priority: "42"
            cisco-crp-prefix: "enable"
            cisco-ignore-rp-set-priority: "enable"
            cisco-register-checksum: "enable"
            cisco-register-checksum-group: "<your_own_value> (source router.access-list.name)"
            join-prune-holdtime: "47"
            message-interval: "48"
            null-register-retries: "49"
            register-rate-limit: "50"
            register-rp-reachability: "enable"
            register-source: "disable"
            register-source-interface: "<your_own_value> (source system.interface.name)"
            register-source-ip: "<your_own_value>"
            register-supression: "55"
            rp-address:
             -
                group: "<your_own_value> (source router.access-list.name)"
                id:  "58"
                ip-address: "<your_own_value>"
            rp-register-keepalive: "60"
            spt-threshold: "enable"
            spt-threshold-group: "<your_own_value> (source router.access-list.name)"
            ssm: "enable"
            ssm-range: "<your_own_value> (source router.access-list.name)"
        route-limit: "65"
        route-threshold: "66"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
build
string
always
Build number of the fortigate image

Sample:
1547
http_method
string
always
Last method used to provision the content into FortiGate

Sample:
PUT
http_status
string
always
Last result given by FortiGate on last operation applied

Sample:
200
mkey
string
success
Master key (id) used in the last call to FortiGate

Sample:
id
name
string
always
Name of the table used to fulfill the request

Sample:
urlfilter
path
string
always
Path of the table used to fulfill the request

Sample:
webfilter
revision
string
always
Internal revision number

Sample:
17.0.2.10658
serial
string
always
Serial number of the unit

Sample:
FGVMEVYYQT3AB5352
status
string
always
Indication of the operation's result

Sample:
success
vdom
string
always
Virtual domain used

Sample:
root
version
string
always
Version of the FortiGate

Sample:
v5.6.3


Status

Authors

  • Miguel Angel Munoz (@mamunozgonzalez)
  • Nicolas Thomas (@thomnico)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/fortios_router_multicast_module.html