docker_swarm – Manage Swarm cluster

New in version 2.7.

Synopsis

  • Create a new Swarm cluster.
  • Add/Remove nodes or managers to an existing cluster.

Requirements

The below requirements are needed on the host that executes this module.

  • Docker API >= 1.25
  • Docker SDK for Python: Please note that the docker-py Python module has been superseded by docker (see here for details). For Python 2.6, docker-py must be used. Otherwise, it is recommended to install the docker Python module. Note that both modules should not be installed at the same time. Also note that when both modules are installed and one of them is uninstalled, the other might no longer function and a reinstall of it is required.
  • Docker SDK for Python >= 1.10.0 (use docker-py for Python 2.6)

Parameters

Parameter Choices/Defaults Comments
advertise_addr
string
Externally reachable address advertised to other nodes.
This can either be an address/port combination in the form 192.168.1.1:4567, or an interface followed by a port number, like eth0:4567.
If the port number is omitted, the port number from the listen address is used.
If advertise_addr is not specified, it will be automatically detected when possible.
Only used when swarm is initialised or joined. Because of this it's not considered for idempotency checking.
api_version
string
Default:
"auto"
The version of the Docker API running on the Docker Host.
Defaults to the latest version of the API supported by Docker SDK for Python and the docker daemon.
If the value is not specified in the task, the value of environment variable DOCKER_API_VERSION will be used instead. If the environment variable is not set, the default value will be used.

aliases: docker_api_version
autolock_managers
boolean
    Choices:
  • no
  • yes
If set, generate a key and use it to lock data stored on the managers.
Docker default value is no.
docker_swarm_info can be used to retrieve the unlock key.
ca_cert
path
Use a CA certificate when performing server verification by providing the path to a CA certificate file.
If the value is not specified in the task and the environment variable DOCKER_CERT_PATH is set, the file ca.pem from the directory specified in the environment variable DOCKER_CERT_PATH will be used.

aliases: tls_ca_cert, cacert_path
ca_force_rotate
integer
An integer whose purpose is to force swarm to generate a new signing CA certificate and key, if none have been specified.
Docker default value is 0.
Requires API version >= 1.30.
client_cert
path
Path to the client's TLS certificate file.
If the value is not specified in the task and the environment variable DOCKER_CERT_PATH is set, the file cert.pem from the directory specified in the environment variable DOCKER_CERT_PATH will be used.

aliases: tls_client_cert, cert_path
client_key
path
Path to the client's TLS key file.
If the value is not specified in the task and the environment variable DOCKER_CERT_PATH is set, the file key.pem from the directory specified in the environment variable DOCKER_CERT_PATH will be used.

aliases: tls_client_key, key_path
debug
boolean
    Choices:
  • no
  • yes
Debug mode
default_addr_pool
list
added in 2.8
Default address pool in CIDR format.
Only used when swarm is initialised. Because of this it's not considered for idempotency checking.
Requires API version >= 1.39.
dispatcher_heartbeat_period
integer
The delay for an agent to send a heartbeat to the dispatcher.
Docker default value is 5s.
docker_host
string
Default:
"unix://var/run/docker.sock"
The URL or Unix socket path used to connect to the Docker API. To connect to a remote host, provide the TCP connection string. For example, tcp://192.0.2.23:2376. If TLS is used to encrypt the connection, the module will automatically replace tcp in the connection URL with https.
If the value is not specified in the task, the value of environment variable DOCKER_HOST will be used instead. If the environment variable is not set, the default value will be used.

aliases: docker_url
election_tick
integer
Amount of ticks (in seconds) needed without a leader to trigger a new election.
Docker default value is 10s.
force
boolean
    Choices:
  • no
  • yes
Use with state present to force creating a new Swarm, even if already part of one.
Use with state absent to Leave the swarm even if this node is a manager.
heartbeat_tick
integer
Amount of ticks (in seconds) between each heartbeat.
Docker default value is 1s.
join_token
string
Swarm token used to join a swarm cluster.
Used with state=join.
keep_old_snapshots
integer
Number of snapshots to keep beyond the current snapshot.
Docker default value is 0.
labels
dictionary
User-defined key/value metadata.
Label operations in this module apply to the docker swarm cluster. Use docker_node module to add/modify/remove swarm node labels.
Requires API version >= 1.32.
listen_addr
string
Default:
"0.0.0.0:2377"
Listen address used for inter-manager communication.
This can either be an address/port combination in the form 192.168.1.1:4567, or an interface followed by a port number, like eth0:4567.
If the port number is omitted, the default swarm listening port is used.
Only used when swarm is initialised or joined. Because of this it's not considered for idempotency checking.
log_entries_for_slow_followers
integer
Number of log entries to keep around to sync up slow followers after a snapshot is created.
name
string
The name of the swarm.
node_cert_expiry
integer
Automatic expiry for nodes certificates.
Docker default value is 3months.
node_id
string
Swarm id of the node to remove.
Used with state=remove.
remote_addrs
list
Remote address of one or more manager nodes of an existing Swarm to connect to.
Used with state=join.
rotate_manager_token
boolean
    Choices:
  • no
  • yes
Rotate the manager join token.
rotate_worker_token
boolean
    Choices:
  • no
  • yes
Rotate the worker join token.
signing_ca_cert
string
The desired signing CA certificate for all swarm node TLS leaf certificates, in PEM format.
This must not be a path to a certificate, but the contents of the certificate.
Requires API version >= 1.30.
signing_ca_key
string
The desired signing CA key for all swarm node TLS leaf certificates, in PEM format.
This must not be a path to a key, but the contents of the key.
Requires API version >= 1.30.
snapshot_interval
integer
Number of logs entries between snapshot.
Docker default value is 10000.
ssl_version
string
Provide a valid SSL version number. Default value determined by ssl.py module.
If the value is not specified in the task, the value of environment variable DOCKER_SSL_VERSION will be used instead.
state
string / required
    Choices:
  • present
  • join
  • absent
  • remove
  • inspect
Set to present, to create/update a new cluster.
Set to join, to join an existing cluster.
Set to absent, to leave an existing cluster.
Set to remove, to remove an absent node from the cluster. Note that removing requires Docker SDK for Python >= 2.4.0.
Set to inspect to display swarm informations.
subnet_size
integer
added in 2.8
Default address pool subnet mask length.
Only used when swarm is initialised. Because of this it's not considered for idempotency checking.
Requires API version >= 1.39.
task_history_retention_limit
integer
Maximum number of tasks history stored.
Docker default value is 5.
timeout
integer
Default:
60
The maximum amount of time in seconds to wait on a response from the API.
If the value is not specified in the task, the value of environment variable DOCKER_TIMEOUT will be used instead. If the environment variable is not set, the default value will be used.
tls
boolean
    Choices:
  • no
  • yes
Secure the connection to the API by using TLS without verifying the authenticity of the Docker host server. Note that if validate_certs is set to yes as well, it will take precedence.
If the value is not specified in the task, the value of environment variable DOCKER_TLS will be used instead. If the environment variable is not set, the default value will be used.
tls_hostname
string
Default:
"localhost"
When verifying the authenticity of the Docker Host server, provide the expected name of the server.
If the value is not specified in the task, the value of environment variable DOCKER_TLS_HOSTNAME will be used instead. If the environment variable is not set, the default value will be used.
validate_certs
boolean
    Choices:
  • no
  • yes
Secure the connection to the API by using TLS and verifying the authenticity of the Docker host server.
If the value is not specified in the task, the value of environment variable DOCKER_TLS_VERIFY will be used instead. If the environment variable is not set, the default value will be used.

aliases: tls_verify

Notes

Note

  • Connect to the Docker daemon by providing parameters with each task or by defining environment variables. You can define DOCKER_HOST, DOCKER_TLS_HOSTNAME, DOCKER_API_VERSION, DOCKER_CERT_PATH, DOCKER_SSL_VERSION, DOCKER_TLS, DOCKER_TLS_VERIFY and DOCKER_TIMEOUT. If you are using docker machine, run the script shipped with the product that sets up the environment. It will set these variables for you. See https://docker-py.readthedocs.io/en/stable/machine/ for more details.
  • When connecting to Docker daemon with TLS, you might need to install additional Python packages. For the Docker SDK for Python, version 2.4 or newer, this can be done by installing docker[tls] with pip.
  • Note that the Docker SDK for Python only allows to specify the path to the Docker configuration for very few functions. In general, it will use $HOME/.docker/config.json if the DOCKER_CONFIG environment variable is not specified, and use $DOCKER_CONFIG/config.json otherwise.

Examples

- name: Init a new swarm with default parameters
  docker_swarm:
    state: present

- name: Update swarm configuration
  docker_swarm:
    state: present
    election_tick: 5

- name: Add nodes
  docker_swarm:
    state: join
    advertise_addr: 192.168.1.2
    join_token: SWMTKN-1--xxxxx
    remote_addrs: [ '192.168.1.1:2377' ]

- name: Leave swarm for a node
  docker_swarm:
    state: absent

- name: Remove a swarm manager
  docker_swarm:
    state: absent
    force: true

- name: Remove node from swarm
  docker_swarm:
    state: remove
    node_id: mynode

- name: Inspect swarm
  docker_swarm:
    state: inspect
  register: swarm_info

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
actions
list
when action failed.
Provides the actions done on the swarm.

swarm_facts
complex
success
Informations about swarm.

JoinTokens
complex
success
Tokens to connect to the Swarm.

Manager
string
success
Token to create a new *manager* node

Worker
string
success
Token to create a new *worker* node

UnlockKey
string
on success if autolock_managers is true and swarm is initialised, or if autolock_managers has changed.
The swarm unlock-key if autolock_managers is true.



Status

Authors

  • Thierry Bouvet (@tbouvet)
  • Piotr Wojciechowski (@WojciechowskiPiotr)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/docker_swarm_module.html