net_linkagg – Manage link aggregation groups on network devices

Synopsis

  • This module provides declarative management of link aggregation groups on network devices.

Parameters

Parameter Choices/Defaults Comments
aggregate
-
List of link aggregation definitions.
members
- / required
List of members interfaces of the link aggregation group. The value can be single interface or list of interfaces.
min_links
-
Minimum members that should be up before bringing up the link aggregation group.
mode
-
    Choices:
  • on
  • active
  • passive
Default:
"yes"
Mode of the link aggregation group. A value of on will enable LACP. active configures the link to actively information about the state of the link, or it can be configured in passive mode ie. send link state information only when received them from another link.
name
- / required
Name of the link aggregation group.
purge
-
Default:
"no"
Purge link aggregation groups not defined in the aggregate parameter.
state
-
    Choices:
  • present
  • absent
  • up
  • down
State of the link aggregation group.

Notes

Note

Examples

- name: configure link aggregation group
  net_linkagg:
    name: bond0
    members:
      - eth0
      - eth1

- name: remove configuration
  net_linkagg:
    name: bond0
    state: absent

- name: Create aggregate of linkagg definitions
  net_linkagg:
    aggregate:
        - { name: bond0, members: [eth1] }
        - { name: bond1, members: [eth2] }

- name: Remove aggregate of linkagg definitions
  net_linkagg:
    aggregate:
      - name: bond0
      - name: bond1
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
commands
list
always, except for the platforms that use Netconf transport to manage the device.
The list of configuration mode commands to send to the device

Sample:
['set interfaces bonding bond0', "set interfaces ethernet eth0 bond-group 'bond0'", "set interfaces ethernet eth1 bond-group 'bond0'"]


Status

Red Hat Support

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors

  • Ricardo Carrillo Cruz (@rcarrillocruz)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/net_linkagg_module.html