arista.eos.eos_bgp_address_family – Manages BGP address family resource module

Note

This plugin is part of the arista.eos collection (version 2.2.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install arista.eos.

To use it in a playbook, specify: arista.eos.eos_bgp_address_family.

New in version 1.4.0: of arista.eos

Synopsis

  • This module configures and manages the attributes of BGP AF on Arista EOS platforms.

Note

This module has a corresponding action plugin.

Parameters

Parameter Choices/Defaults Comments
config
dictionary
Configurations for BGP address family.
address_family
list / elements=dictionary
Enable address family and enter its config mode
afi
string
    Choices:
  • ipv4
  • ipv6
  • evpn
address family.
bgp_params
dictionary
BGP parameters.
additional_paths
string
    Choices:
  • install
  • send
  • receive
BGP additional-paths commands
next_hop_address_family
string
    Choices:
  • ipv6
Next-hop address-family configuration
next_hop_unchanged
boolean
    Choices:
  • no
  • yes
Preserve original nexthop while advertising routes to eBGP peers.
redistribute_internal
boolean
    Choices:
  • no
  • yes
Redistribute internal BGP routes.
route
string
Configure route-map for route installation.
graceful_restart
boolean
    Choices:
  • no
  • yes
Enable graceful restart mode.
neighbor
list / elements=dictionary
Configure routing for a network.
activate
boolean
    Choices:
  • no
  • yes
Activate neighbor in the address family.
additional_paths
string
    Choices:
  • send
  • receive
BGP additional-paths commands.
default_originate
dictionary
Originate default route to this neighbor.
always
boolean
    Choices:
  • no
  • yes
Always originate default route to this neighbor.
route_map
string
Route map reference.
encapsulation
dictionary
Default transport encapsulation for neighbor. Applicable for evpn address-family.
source_interface
string
Source interface to update BGP next hop address. Applicable for mpls transport.
transport
string
    Choices:
  • mpls
  • vxlan
MPLS/VXLAN transport.
graceful_restart
boolean
    Choices:
  • no
  • yes
Enable graceful restart mode.
next_hop_address_family
string
    Choices:
  • ipv6
Next-hop address-family configuration
next_hop_unchanged
boolean
    Choices:
  • no
  • yes
Preserve original nexthop while advertising routes to eBGP peers.
peer
string
Neighbor address/ peer-group name.
prefix_list
dictionary
Prefix list reference.
direction
string
    Choices:
  • in
  • out
Configure an inbound/outbound prefix-list.
name
string
prefix list name.
route_map
dictionary
Route map reference.
direction
string
    Choices:
  • in
  • out
Configure an inbound/outbound route-map.
name
string
Route map name.
weight
integer
Weight to assign.
network
list / elements=dictionary
configure routing for network.
address
string
network address.
route_map
string
Route map reference.
redistribute
list / elements=dictionary
Redistribute routes in to BGP.
isis_level
string
    Choices:
  • level-1
  • level-2
  • level-1-2
Applicable for isis routes. Specify isis route level.
ospf_route
string
    Choices:
  • internal
  • external
  • nssa_external_1
  • nssa_external_2
ospf route options.
protocol
string
    Choices:
  • isis
  • ospf3
  • dhcp
Routes to be redistributed.
route_map
string
Route map reference.
route_target
dictionary
Route target
mode
string
    Choices:
  • both
  • import
  • export
route import or route export.
target
string
route target
safi
string
    Choices:
  • labeled-unicast
  • multicast
Address family type for ipv4.
vrf
string
name of the VRF in which BGP will be configured.
as_number
string
Autonomous system number.
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the EOS device by executing the command show running-config | section bgp.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • deleted
  • merged
  • overridden
  • replaced
  • gathered
  • rendered
  • parsed
The state the configuration should be left in.

Notes

Note

  • Tested against Arista EOS 4.23.0F
  • This module works with connection network_cli. See the EOS Platform Options.

Examples

# Using merged

# Before state

# veos(config)#show running-config | section bgp
# veos(config)#

  - name: Merge provided configuration with device configuration
    arista.eos.eos_bgp_address_family:
      config:
        as_number: "10"
        address_family:
          - afi: "ipv4"
            redistribute:
              - protocol: "ospf3"
                ospf_route: "external"
            network:
              - address: "1.1.1.0/24"
              - address: "1.5.1.0/24"
                route_map: "MAP01"
          - afi: "ipv6"
            bgp_params:
              additional_paths: "receive"
            neighbor:
              - peer: "peer2"
                default_originate:
                  always: True
          - afi: "ipv6"
            redistribute:
              - protocol: "isis"
                isis_level: "level-2"
            route_target:
              mode: "export"
              target: "33:11"
            vrf: "vrft"
      state: merged

# After state:

# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       neighbor 1.1.1.1 activate
#       network 1.1.1.0/24
#       network 1.5.1.0/24 route-map MAP01
#       redistribute ospf3 match external
#    !
#    address-family ipv6
#       bgp additional-paths receive
#       neighbor peer2 activate
#       neighbor peer2 default-originate always
#    !
#    vrf vrft
#       address-family ipv6
#          route-target export 33:11
#          redistribute isis level-2
# veos(config-router-bgp)#

# Module Execution:

# "after": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "redistribute": [
#                     {
#                         "isis_level": "level-2",
#                         "protocol": "isis"
#                     }
#                 ],
#                 "route_target": {
#                     "mode": "export",
#                     "target": "33:11"
#                 },
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },
#     "before": {},
#     "changed": true,
#     "commands": [
#         "router bgp 10",
#         "address-family ipv4",
#         "redistribute ospf3 match external",
#         "network 1.1.1.0/24",
#         "network 1.5.1.0/24 route-map MAP01",
#         "exit",
#         "address-family ipv6",
#         "neighbor peer2 default-originate always",
#         "bgp additional-paths receive",
#         "exit",
#         "vrf vrft",
#         "address-family ipv6",
#         "redistribute isis level-2",
#         "route-target export 33:11",
#         "exit",
#         "exit"
#     ],

# Using replaced:

# Before State:

# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       neighbor 1.1.1.1 activate
#       network 1.1.1.0/24
#       network 1.5.1.0/24 route-map MAP01
#       redistribute ospf3 match external
#    !
#    address-family ipv6
#       bgp additional-paths receive
#       neighbor peer2 activate
#       neighbor peer2 default-originate always
#    !
#    vrf vrft
#       address-family ipv6
#          route-target export 33:11
#          redistribute isis level-2
# veos(config-router-bgp)#
#

  - name: Replace
    arista.eos.eos_bgp_address_family:
      config:
        as_number: "10"
        address_family:
          - afi: "ipv6"
            vrf: "vrft"
            redistribute:
              - protocol: "ospf3"
                ospf_route: "external"
          - afi: "ipv6"
            redistribute:
              - protocol: "isis"
                isis_level: "level-2"
      state: replaced

# After State:

# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       neighbor 1.1.1.1 activate
#       network 1.1.1.0/24
#       network 1.5.1.0/24 route-map MAP01
#       redistribute ospf3 match external
#    !
#    address-family ipv6
#       neighbor peer2 default-originate always
#       redistribute isis level-2
#    !
#    vrf vrft
#       address-family ipv6
#          redistribute ospf3 match external
# veos(config-router-bgp)#
#
#
# # Module Execution:
#
#     "after": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "neighbor": [
#                     {
#                         "activate": true,
#                         "peer": "1.1.1.1"
#                     }
#                 ],
#                 "network": [
#                     {
#                         "address": "1.1.1.0/24"
#                     },
#                     {
#                         "address": "1.5.1.0/24",
#                         "route_map": "MAP01"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "isis_level": "level-2",
#                         "protocol": "isis"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ],
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },
#     "before": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "neighbor": [
#                     {
#                         "activate": true,
#                         "peer": "1.1.1.1"
#                     }
#                 ],
#                 "network": [
#                     {
#                         "address": "1.1.1.0/24"
#                     },
#                     {
#                         "address": "1.5.1.0/24",
#                         "route_map": "MAP01"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "activate": true,
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "redistribute": [
#                     {
#                         "isis_level": "level-2",
#                         "protocol": "isis"
#                     }
#                 ],
#                 "route_target": {
#                     "mode": "export",
#                     "target": "33:11"
#                 },
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },
#     "changed": true,
#     "commands": [
#         "router bgp 10",
#         "vrf vrft",
#         "address-family ipv6",
#         "redistribute ospf3 match external",
#         "no redistribute isis level-2",
#         "no route-target export 33:11",
#         "exit",
#         "exit",
#         "address-family ipv6",
#         "redistribute isis level-2",
#         "no neighbor peer2 activate",
#         "no bgp additional-paths receive",
#         "exit"
#     ],

# Using overridden (overriding af at global context):
# Before state:

# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       neighbor 1.1.1.1 activate
#       network 1.1.1.0/24
#       network 1.5.1.0/24 route-map MAP01
#       redistribute ospf3 match external
#    !
#    address-family ipv6
#       neighbor peer2 default-originate always
#       redistribute isis level-2
#    !
#    vrf vrft
#       address-family ipv6
#          redistribute ospf3 match external
# veos(config-router-bgp)#

  - name: Overridden
    arista.eos.eos_bgp_address_family:
      config:
        as_number: "10"
        address_family:
          - afi: "ipv4"
            bgp_params:
              additional_paths: "receive"
            neighbor:
              - peer: "peer2"
                default_originate:
                  always: True
      state: overridden

# After State:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#    !
#    vrf vrft
#       address-family ipv6
#          redistribute ospf3 match external
# veos(config-router-bgp)#
#
# Module Execution:
#
# "after": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ],
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },
#     "before": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "neighbor": [
#                     {
#                         "activate": true,
#                         "peer": "1.1.1.1"
#                     }
#                 ],
#                 "network": [
#                     {
#                         "address": "1.1.1.0/24"
#                     },
#                     {
#                         "address": "1.5.1.0/24",
#                         "route_map": "MAP01"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "isis_level": "level-2",
#                         "protocol": "isis"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ],
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },
#     "changed": true,
#     "commands": [
#         "router bgp 10",
#         "address-family ipv4",
#         "no redistribute ospf3 match external",
#         "no network 1.1.1.0/24",
#         "no network 1.5.1.0/24 route-map MAP01",
#         "neighbor peer2 default-originate always",
#         "no neighbor 1.1.1.1 activate",
#         "bgp additional-paths receive",
#         "exit",
#         "no address-family ipv6"
#     ],

# using Overridden (overridding af in vrf context):

# Before State:

# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#       no neighbor 1.1.1.1 activate
#       network 1.1.1.0/24
#       network 1.5.1.0/24 route-map MAP01
#       redistribute ospf3 match external
#    !
#    address-family ipv6
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#    !
#    vrf vrft
#       address-family ipv6
#          route-target export 33:11
#          redistribute isis level-2
#          redistribute ospf3 match external
# veos(config-router-bgp)#


  - name: Overridden
    arista.eos.eos_bgp_address_family:
      config:
        as_number: "10"
        address_family:
          - afi: "ipv4"
            bgp_params:
              additional_paths: "receive"
            neighbor:
              - peer: "peer2"
                default_originate:
                  always: True
            vrf: vrft
      state: overridden

# After State:

# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#       network 1.1.1.0/24
#       network 1.5.1.0/24 route-map MAP01
#       redistribute ospf3 match external
#    !
#    address-family ipv6
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#    !
#    vrf vrft
#       address-family ipv4
#          bgp additional-paths receive
# veos(config-router-bgp)#
#
# Module Execution:
#
# "after": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ],
#                 "network": [
#                     {
#                         "address": "1.1.1.0/24"
#                     },
#                     {
#                         "address": "1.5.1.0/24",
#                         "route_map": "MAP01"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },
#     "before": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ],
#                 "network": [
#                     {
#                         "address": "1.1.1.0/24"
#                     },
#                     {
#                         "address": "1.5.1.0/24",
#                         "route_map": "MAP01"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "redistribute": [
#                     {
#                         "isis_level": "level-2",
#                         "protocol": "isis"
#                     },
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ],
#                 "route_target": {
#                     "mode": "export",
#                     "target": "33:11"
#                 },
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },
#     "changed": true,
#     "commands": [
#         "router bgp 10",
#         "vrf vrft",
#         "address-family ipv4",
#         "neighbor peer2 default-originate always",
#         "bgp additional-paths receive",
#         "exit",
#         "exit",
#         " vrf vrft",
#         "no address-family ipv6"
#     ],

# Using Deleted:

# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#       no neighbor 1.1.1.1 activate
#       network 1.1.1.0/24
#       network 1.5.1.0/24 route-map MAP01
#       redistribute ospf3 match external
#    !
#    address-family ipv6
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#    !
#    vrf vrft
#       address-family ipv4
#          bgp additional-paths receive
# veos(config-router-bgp)#

  - name: Delete
    arista.eos.eos_bgp_address_family:
      config:
        as_number: "10"
        address_family:
          - afi: "ipv6"
            vrf: "vrft"
          - afi: "ipv6"
      state: deleted

# After State:

# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#       no neighbor 1.1.1.1 activate
#       network 1.1.1.0/24
#       network 1.5.1.0/24 route-map MAP01
#       redistribute ospf3 match external
#    !
#    vrf vrft
#       address-family ipv4
#          bgp additional-paths receive
# veos(config-router-bgp)#
#
# Module Execution:
#
# "after": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ],
#                 "network": [
#                     {
#                         "address": "1.1.1.0/24"
#                     },
#                     {
#                         "address": "1.5.1.0/24",
#                         "route_map": "MAP01"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },
#     "before": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ],
#                 "network": [
#                     {
#                         "address": "1.1.1.0/24"
#                     },
#                     {
#                         "address": "1.5.1.0/24",
#                         "route_map": "MAP01"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },

# Using parsed:

# parsed_bgp_address_family.cfg :

# router bgp 10
#    neighbor n2 peer-group
#    neighbor n2 next-hop-unchanged
#    neighbor n2 maximum-routes 12000
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    network 1.1.1.0/24
#    network 1.5.1.0/24 route-map MAP01
#    !
#    address-family ipv4
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#       redistribute ospf3 match external
#    !
#    address-family ipv6
#       no bgp additional-paths receive
#       neighbor n2 next-hop-unchanged
#       redistribute isis level-2
#    !
#    vrf bgp_10
#       ip access-group acl01
#       ucmp fec threshold trigger 33 clear 22 warning-only
#       !
#       address-family ipv4
#          route-target import 20:11
#    !
#    vrf vrft
#       address-family ipv4
#          bgp additional-paths receive
#       !
#       address-family ipv6
#          redistribute ospf3 match external

  - name: parse configs
    arista.eos.eos_bgp_address_family:
      running_config: "{{ lookup('file', './parsed_bgp_address_family.cfg') }}"
      state: parsed

# Module Execution:
# "parsed": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "neighbor": [
#                     {
#                         "next_hop_unchanged": true,
#                         "peer": "n2"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "isis_level": "level-2",
#                         "protocol": "isis"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv4",
#                 "route_target": {
#                     "mode": "import",
#                     "target": "20:11"
#                 },
#                 "vrf": "bgp_10"
#             },
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "vrf": "vrft"
#             },
#             {
#                 "afi": "ipv6",
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ],
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     }
# }

# Using gathered:

# Device config:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#       no neighbor 1.1.1.1 activate
#       network 1.1.1.0/24
#       network 1.5.1.0/24 route-map MAP01
#       redistribute ospf3 match external
#    !
#    vrf vrft
#       address-family ipv4
#          bgp additional-paths receive
# veos(config-router-bgp)#

  - name: gather configs
    arista.eos.eos_bgp_address_family:
      state: gathered

# Module Execution:
# "gathered": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ],
#                 "network": [
#                     {
#                         "address": "1.1.1.0/24"
#                     },
#                     {
#                         "address": "1.5.1.0/24",
#                         "route_map": "MAP01"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },

# using rendered:

  - name:  Render
    arista.eos.eos_bgp_address_family:
      config:
        as_number: "10"
        address_family:
          - afi: "ipv4"
            redistribute:
              - protocol: "ospf3"
                ospf_route: "external"
            network:
              - address: "1.1.1.0/24"
              - address: "1.5.1.0/24"
                route_map: "MAP01"
          - afi: "ipv6"
            bgp_params:
              additional_paths: "receive"
            neighbor:
              - peer: "peer2"
                default_originate:
                  always: True
          - afi: "ipv6"
            redistribute:
              - protocol: "isis"
                isis_level: "level-2"
            route_target:
              mode: "export"
              target: "33:11"
            vrf: "vrft"

      state: rendered

# Module Execution:

# "rendered": [
#         "router bgp 10",
#         "address-family ipv4",
#         "redistribute ospf3 match external",
#         "network 1.1.1.0/24",
#         "network 1.5.1.0/24 route-map MAP01",
#         "exit",
#         "address-family ipv6",
#         "neighbor peer2 default-originate always",
#         "bgp additional-paths receive",
#         "exit",
#         "vrf vrft",
#         "address-family ipv6",
#         "redistribute isis level-2",
#         "route-target export 33:11",
#         "exit",
#         "exit"
#     ]
#

Authors

  • Gomathi Selvi Srinivasan (@GomathiselviS)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/arista/eos/eos_bgp_address_family_module.html