junipernetworks.junos.junos_bgp_address_family – Manage BGP Address Family attributes of interfaces on Junos devices.

Note

This plugin is part of the junipernetworks.junos collection (version 2.6.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install junipernetworks.junos.

To use it in a playbook, specify: junipernetworks.junos.junos_bgp_address_family.

New in version 1.3.0: of junipernetworks.junos

Synopsis

  • Manage BGP Address Family attributes of interfaces on Junos network devices.

Note

This module has a corresponding action plugin.

Requirements

The below requirements are needed on the host that executes this module.

  • ncclient (>=v0.6.4)
  • xmltodict (>=0.12.0)

Parameters

Parameter Choices/Defaults Comments
config
dictionary
The provided link BGP address family dictionary.
address_family
list / elements=dictionary
Enable address family and enter its config mode.
af_type
list / elements=dictionary
Address family type for ipv4.
accepted_prefix_limit
dictionary
Specify limit for maximum number of prefixes accepted from a peer.
forever
boolean
    Choices:
  • no
  • yes
Idle the peer until the user intervenes.
idle_timeout
boolean
    Choices:
  • no
  • yes
Set idle timeout node.
idle_timeout_value
integer
Specify timeout before attempting to restart peer.
limit_threshold
integer
Specify teardown percentage of prefix-limit to start warnings.
maximum
integer
Specify maximum number of prefixes accepted from a peer.
teardown
boolean
    Choices:
  • no
  • yes
Clear peer connection on reaching limit.
add_path
dictionary
Advertise multiple paths to peer.
receive
boolean
    Choices:
  • no
  • yes
Receive multiple paths from peer.
send
dictionary
Send multiple paths to peer.
include_backup_path
integer
Specify number of backup paths to advertise.
multipath
boolean
    Choices:
  • no
  • yes
Include only multipath contributor routes.
path_count
integer / required
Include only multipath contributor routes.
path_selection_mode
dictionary
Configure how to select add-path routes.
all_paths
boolean
    Choices:
  • no
  • yes
Advertise all paths allowed by path count.
equal_cost_paths
boolean
    Choices:
  • no
  • yes
Advertise equal cost paths.
prefix_policy
string
Perform add-path only for prefixes that match policy.
aggregate_label
dictionary
Aggregate labels of incoming routes with the same FEC.
community
string
Community to identify the FEC of incoming routesC.
set
boolean
    Choices:
  • no
  • yes
Set Aggregate labels of incoming routes with the same FEC
aigp
dictionary
Allow sending and receiving of AIGP attribute.
disable
boolean
    Choices:
  • no
  • yes
Dn not allow sending and receiving of AIGP attribute.
set
boolean
    Choices:
  • no
  • yes
Set AIGP.
damping
boolean
    Choices:
  • no
  • yes
Enable route flap damping.
defer_initial_multipath_build
dictionary
Defer initial multipath build until EOR is received.
maximum_delay
integer
Max delay(sec) multipath build after peer is up.
set
boolean
    Choices:
  • no
  • yes
Set defer initial multipath build.
delay_route_advertisements
dictionary
Delay route updates for this family until FIB-sync.
max_delay_route_age
integer
Set max delay advertisement route age.
max_delay_routing_uptime
integer
Set max delay advertisement route age.
min_delay_inbound_convergence
integer
Set min delayadvertisement after source-peer sent all routes.
min_delay_routing_uptime
integer
Set min delay advertisement route age.
set
boolean
    Choices:
  • no
  • yes
Set delay route advertisements.
entropy_label
dictionary
Use entropy label for entropy label capable BGP LSPs.
import
string
Policy to select BGP LSPs to use entropy label.
no_next_hop_validation
boolean
    Choices:
  • no
  • yes
Don't validate next hop field against route next hop.
set
boolean
    Choices:
  • no
  • yes
Set entropy-label attribute.
explicit_null
dictionary
Advertise explicit null.
connected_only
boolean
    Choices:
  • no
  • yes
Advertise explicit null only for connected routes.
set
boolean
    Choices:
  • no
  • yes
Set explicit-null attribute.
extended_nexthop
boolean
    Choices:
  • no
  • yes
Enable extended nexthop encoding.
extended_nexthop_color
boolean
    Choices:
  • no
  • yes
Resolve using extended color nexthop.
graceful_restart_forwarding_state_bit
string
    Choices:
  • from-fib
  • set
Specify BGP graceful restart options.
legacy_redirect_ip_action
dictionary
Configure legacy redirect to IP support.
receive
boolean
    Choices:
  • no
  • yes
Accept legacy encoded redirect-to-ip action attribute
send
boolean
    Choices:
  • no
  • yes
Advertise Redirect action as legacy redirect attribute.
set
boolean
    Choices:
  • no
  • yes
Set the legacy-redirect-ip-action.
local_ipv4_address
string
Specify local IPv4 address.
loops
integer
Allow local AS in received AS paths.
no_install
boolean
    Choices:
  • no
  • yes
Dont install received routes in forwarding.
no_validate
string
Bypass validation procedure for routes that match policy.
output_queue_priority_expedited
boolean
    Choices:
  • no
  • yes
Expedited queue; highest priority.
output_queue_priority_priority
integer
Output queue priority; higher is better.
per_group_label
boolean
    Choices:
  • no
  • yes
Advertise prefixes with unique labels per group.
per_prefix_label
boolean
    Choices:
  • no
  • yes
Allocate a unique label to each advertised prefix.
prefix_limit
dictionary
Limit maximum number of prefixes from a peer.
forever
boolean
    Choices:
  • no
  • yes
Idle the peer until the user intervenes.
idle_timeout
boolean
    Choices:
  • no
  • yes
Set idle timeout node.
idle_timeout_value
integer
Specify timeout before attempting to restart peer.
limit_threshold
integer
Percentage of prefix-limit to start warnings.
maximum
integer
Specify maximum number of prefixes from a peer.
teardown
boolean
    Choices:
  • no
  • yes
Clear peer connection on reaching limit.
resolve_vpn
boolean
    Choices:
  • no
  • yes
Install received NLRI in inet.3 also.
rib
string
    Choices:
  • inet.3
Select table used by labeled unicast routes.
ribgroup_name
string
Name of the routing table group.
route_refresh_priority_expedited
boolean
    Choices:
  • no
  • yes
Expedited queue; highest priority.
route_refresh_priority_priority
integer
Output queue priority; higher is better.
secondary_independent_resolution
boolean
    Choices:
  • no
  • yes
Resolve FLOW routes in VRF table independent of VPN FLOW route.
set
boolean
    Choices:
  • no
  • yes
Set NLRI.
strip_nexthop
boolean
    Choices:
  • no
  • yes
Strip the next-hop from the outgoing flow update.
topology
list / elements=dictionary
Multi topology routing tables.
community
list / elements=string
Community to identify multi topology routes.
name
string
Specify topology name.
traffic_statistics
dictionary
Collect statistics for BGP label-switched paths
file
dictionary
Statistics file options.
filename
string
Name of file in which to write trace information.
files
integer
Maximum number of trace files.
no_world_readable
boolean
    Choices:
  • no
  • yes
Don't allow any user to read the log file.
size
integer
Maximum trace file size.
world_readable
boolean
    Choices:
  • no
  • yes
Don't allow any user to read the log file.
interval
integer
Time to collect statistics (seconds).
labeled_path
boolean
    Choices:
  • no
  • yes
Enable ingress labeled path statistics.
set
boolean
    Choices:
  • no
  • yes
Set traffic-statistics.
type
string
    Choices:
  • any
  • flow
  • labeled-unicast
  • multicast
  • segment-routing-te
  • unicast
  • signaling
  • auto-discovery-mspw
  • auto-discovery-only
Specify type of NLRI.
withdraw_priority_expedited
boolean
    Choices:
  • no
  • yes
Expedited queue; highest priority.
withdraw_priority_priority
integer
Output queue priority; higher is better.
afi
string
    Choices:
  • evpn
  • inet
  • inet-mdt
  • inet-mvpn
  • inet-vpn
  • inet6
  • inet6-mvpn
  • inet6-vpn
  • iso-vpn
  • l2vpn
  • route-target
  • traffic-engineering
address family.
groups
list / elements=dictionary
Specify address family config for groups.
address_family
list / elements=dictionary
Enable address family and enter its config mode.
af_type
list / elements=dictionary
Address family type for ipv4.
accepted_prefix_limit
dictionary
Specify limit for maximum number of prefixes accepted from a peer.
forever
boolean
    Choices:
  • no
  • yes
Idle the peer until the user intervenes.
idle_timeout
boolean
    Choices:
  • no
  • yes
Set idle timeout node.
idle_timeout_value
integer
Specify timeout before attempting to restart peer.
limit_threshold
integer
Specify teardown percentage of prefix-limit to start warnings.
maximum
integer
Specify maximum number of prefixes accepted from a peer.
teardown
boolean
    Choices:
  • no
  • yes
Clear peer connection on reaching limit.
add_path
dictionary
Advertise multiple paths to peer.
receive
boolean
    Choices:
  • no
  • yes
Receive multiple paths from peer.
send
dictionary
Send multiple paths to peer.
include_backup_path
integer
Specify number of backup paths to advertise.
multipath
boolean
    Choices:
  • no
  • yes
Include only multipath contributor routes.
path_count
integer / required
Include only multipath contributor routes.
path_selection_mode
dictionary
Configure how to select add-path routes.
all_paths
boolean
    Choices:
  • no
  • yes
Advertise all paths allowed by path count.
equal_cost_paths
boolean
    Choices:
  • no
  • yes
Advertise equal cost paths.
prefix_policy
string
Perform add-path only for prefixes that match policy.
aggregate_label
dictionary
Aggregate labels of incoming routes with the same FEC.
community
string
Community to identify the FEC of incoming routesC.
set
boolean
    Choices:
  • no
  • yes
Set Aggregate labels of incoming routes with the same FEC
aigp
dictionary
Allow sending and receiving of AIGP attribute.
disable
boolean
    Choices:
  • no
  • yes
Dn not allow sending and receiving of AIGP attribute.
set
boolean
    Choices:
  • no
  • yes
Set AIGP.
damping
boolean
    Choices:
  • no
  • yes
Enable route flap damping.
defer_initial_multipath_build
dictionary
Defer initial multipath build until EOR is received.
maximum_delay
integer
Max delay(sec) multipath build after peer is up.
set
boolean
    Choices:
  • no
  • yes
Set defer initial multipath build.
delay_route_advertisements
dictionary
Delay route updates for this family until FIB-sync.
max_delay_route_age
integer
Set max delay advertisement route age.
max_delay_routing_uptime
integer
Set max delay advertisement route age.
min_delay_inbound_convergence
integer
Set min delayadvertisement after source-peer sent all routes.
min_delay_routing_uptime
integer
Set min delay advertisement route age.
set
boolean
    Choices:
  • no
  • yes
Set delay route advertisements.
entropy_label
dictionary
Use entropy label for entropy label capable BGP LSPs.
import
string
Policy to select BGP LSPs to use entropy label.
no_next_hop_validation
boolean
    Choices:
  • no
  • yes
Don't validate next hop field against route next hop.
set
boolean
    Choices:
  • no
  • yes
Set entropy-label attribute.
explicit_null
dictionary
Advertise explicit null.
connected_only
boolean
    Choices:
  • no
  • yes
Advertise explicit null only for connected routes.
set
boolean
    Choices:
  • no
  • yes
Set explicit-null attribute.
extended_nexthop
boolean
    Choices:
  • no
  • yes
Enable extended nexthop encoding.
extended_nexthop_color
boolean
    Choices:
  • no
  • yes
Resolve using extended color nexthop.
graceful_restart_forwarding_state_bit
string
    Choices:
  • from-fib
  • set
Specify BGP graceful restart options.
legacy_redirect_ip_action
dictionary
Configure legacy redirect to IP support.
receive
boolean
    Choices:
  • no
  • yes
Accept legacy encoded redirect-to-ip action attribute
send
boolean
    Choices:
  • no
  • yes
Advertise Redirect action as legacy redirect attribute.
set
boolean
    Choices:
  • no
  • yes
Set the legacy-redirect-ip-action.
local_ipv4_address
string
Specify local IPv4 address.
loops
integer
Allow local AS in received AS paths.
no_install
boolean
    Choices:
  • no
  • yes
Dont install received routes in forwarding.
no_validate
string
Bypass validation procedure for routes that match policy.
output_queue_priority_expedited
boolean
    Choices:
  • no
  • yes
Expedited queue; highest priority.
output_queue_priority_priority
integer
Output queue priority; higher is better.
per_group_label
boolean
    Choices:
  • no
  • yes
Advertise prefixes with unique labels per group.
per_prefix_label
boolean
    Choices:
  • no
  • yes
Allocate a unique label to each advertised prefix.
prefix_limit
dictionary
Limit maximum number of prefixes from a peer.
forever
boolean
    Choices:
  • no
  • yes
Idle the peer until the user intervenes.
idle_timeout
boolean
    Choices:
  • no
  • yes
Set idle timeout node.
idle_timeout_value
integer
Specify timeout before attempting to restart peer.
limit_threshold
integer
Percentage of prefix-limit to start warnings.
maximum
integer
Specify maximum number of prefixes from a peer.
teardown
boolean
    Choices:
  • no
  • yes
Clear peer connection on reaching limit.
resolve_vpn
boolean
    Choices:
  • no
  • yes
Install received NLRI in inet.3 also.
rib
string
    Choices:
  • inet.3
Select table used by labeled unicast routes.
ribgroup_name
string
Name of the routing table group.
route_refresh_priority_expedited
boolean
    Choices:
  • no
  • yes
Expedited queue; highest priority.
route_refresh_priority_priority
integer
Output queue priority; higher is better.
secondary_independent_resolution
boolean
    Choices:
  • no
  • yes
Resolve FLOW routes in VRF table independent of VPN FLOW route.
set
boolean
    Choices:
  • no
  • yes
Set NLRI.
strip_nexthop
boolean
    Choices:
  • no
  • yes
Strip the next-hop from the outgoing flow update.
topology
list / elements=dictionary
Multi topology routing tables.
community
list / elements=string
Community to identify multi topology routes.
name
string
Specify topology name.
traffic_statistics
dictionary
Collect statistics for BGP label-switched paths
file
dictionary
Statistics file options.
filename
string
Name of file in which to write trace information.
files
integer
Maximum number of trace files.
no_world_readable
boolean
    Choices:
  • no
  • yes
Don't allow any user to read the log file.
size
integer
Maximum trace file size.
world_readable
boolean
    Choices:
  • no
  • yes
Don't allow any user to read the log file.
interval
integer
Time to collect statistics (seconds).
labeled_path
boolean
    Choices:
  • no
  • yes
Enable ingress labeled path statistics.
set
boolean
    Choices:
  • no
  • yes
Set traffic-statistics.
type
string
    Choices:
  • any
  • flow
  • labeled-unicast
  • multicast
  • segment-routing-te
  • unicast
  • signaling
  • auto-discovery-mspw
  • auto-discovery-only
Specify type of NLRI.
withdraw_priority_expedited
boolean
    Choices:
  • no
  • yes
Expedited queue; highest priority.
withdraw_priority_priority
integer
Output queue priority; higher is better.
afi
string
    Choices:
  • evpn
  • inet
  • inet-mdt
  • inet-mvpn
  • inet-vpn
  • inet6
  • inet6-mvpn
  • inet6-vpn
  • iso-vpn
  • l2vpn
  • route-target
  • traffic-engineering
address family.
name
string
Specify name of the group
neighbors
list / elements=dictionary
Specify address family config per neighbor.
address_family
list / elements=dictionary
Enable address family and enter its config mode.
af_type
list / elements=dictionary
Address family type for ipv4.
accepted_prefix_limit
dictionary
Specify limit for maximum number of prefixes accepted from a peer.
forever
boolean
    Choices:
  • no
  • yes
Idle the peer until the user intervenes.
idle_timeout
boolean
    Choices:
  • no
  • yes
Set idle timeout node.
idle_timeout_value
integer
Specify timeout before attempting to restart peer.
limit_threshold
integer
Specify teardown percentage of prefix-limit to start warnings.
maximum
integer
Specify maximum number of prefixes accepted from a peer.
teardown
boolean
    Choices:
  • no
  • yes
Clear peer connection on reaching limit.
add_path
dictionary
Advertise multiple paths to peer.
receive
boolean
    Choices:
  • no
  • yes
Receive multiple paths from peer.
send
dictionary
Send multiple paths to peer.
include_backup_path
integer
Specify number of backup paths to advertise.
multipath
boolean
    Choices:
  • no
  • yes
Include only multipath contributor routes.
path_count
integer / required
Include only multipath contributor routes.
path_selection_mode
dictionary
Configure how to select add-path routes.
all_paths
boolean
    Choices:
  • no
  • yes
Advertise all paths allowed by path count.
equal_cost_paths
boolean
    Choices:
  • no
  • yes
Advertise equal cost paths.
prefix_policy
string
Perform add-path only for prefixes that match policy.
aggregate_label
dictionary
Aggregate labels of incoming routes with the same FEC.
community
string
Community to identify the FEC of incoming routesC.
set
boolean
    Choices:
  • no
  • yes
Set Aggregate labels of incoming routes with the same FEC
aigp
dictionary
Allow sending and receiving of AIGP attribute.
disable
boolean
    Choices:
  • no
  • yes
Dn not allow sending and receiving of AIGP attribute.
set
boolean
    Choices:
  • no
  • yes
Set AIGP.
damping
boolean
    Choices:
  • no
  • yes
Enable route flap damping.
defer_initial_multipath_build
dictionary
Defer initial multipath build until EOR is received.
maximum_delay
integer
Max delay(sec) multipath build after peer is up.
set
boolean
    Choices:
  • no
  • yes
Set defer initial multipath build.
delay_route_advertisements
dictionary
Delay route updates for this family until FIB-sync.
max_delay_route_age
integer
Set max delay advertisement route age.
max_delay_routing_uptime
integer
Set max delay advertisement route age.
min_delay_inbound_convergence
integer
Set min delayadvertisement after source-peer sent all routes.
min_delay_routing_uptime
integer
Set min delay advertisement route age.
set
boolean
    Choices:
  • no
  • yes
Set delay route advertisements.
entropy_label
dictionary
Use entropy label for entropy label capable BGP LSPs.
import
string
Policy to select BGP LSPs to use entropy label.
no_next_hop_validation
boolean
    Choices:
  • no
  • yes
Don't validate next hop field against route next hop.
set
boolean
    Choices:
  • no
  • yes
Set entropy-label attribute.
explicit_null
dictionary
Advertise explicit null.
connected_only
boolean
    Choices:
  • no
  • yes
Advertise explicit null only for connected routes.
set
boolean
    Choices:
  • no
  • yes
Set explicit-null attribute.
extended_nexthop
boolean
    Choices:
  • no
  • yes
Enable extended nexthop encoding.
extended_nexthop_color
boolean
    Choices:
  • no
  • yes
Resolve using extended color nexthop.
graceful_restart_forwarding_state_bit
string
    Choices:
  • from-fib
  • set
Specify BGP graceful restart options.
legacy_redirect_ip_action
dictionary
Configure legacy redirect to IP support.
receive
boolean
    Choices:
  • no
  • yes
Accept legacy encoded redirect-to-ip action attribute
send
boolean
    Choices:
  • no
  • yes
Advertise Redirect action as legacy redirect attribute.
set
boolean
    Choices:
  • no
  • yes
Set the legacy-redirect-ip-action.
local_ipv4_address
string
Specify local IPv4 address.
loops
integer
Allow local AS in received AS paths.
no_install
boolean
    Choices:
  • no
  • yes
Dont install received routes in forwarding.
no_validate
string
Bypass validation procedure for routes that match policy.
output_queue_priority_expedited
boolean
    Choices:
  • no
  • yes
Expedited queue; highest priority.
output_queue_priority_priority
integer
Output queue priority; higher is better.
per_group_label
boolean
    Choices:
  • no
  • yes
Advertise prefixes with unique labels per group.
per_prefix_label
boolean
    Choices:
  • no
  • yes
Allocate a unique label to each advertised prefix.
prefix_limit
dictionary
Limit maximum number of prefixes from a peer.
forever
boolean
    Choices:
  • no
  • yes
Idle the peer until the user intervenes.
idle_timeout
boolean
    Choices:
  • no
  • yes
Set idle timeout node.
idle_timeout_value
integer
Specify timeout before attempting to restart peer.
limit_threshold
integer
Percentage of prefix-limit to start warnings.
maximum
integer
Specify maximum number of prefixes from a peer.
teardown
boolean
    Choices:
  • no
  • yes
Clear peer connection on reaching limit.
resolve_vpn
boolean
    Choices:
  • no
  • yes
Install received NLRI in inet.3 also.
rib
string
    Choices:
  • inet.3
Select table used by labeled unicast routes.
ribgroup_name
string
Name of the routing table group.
route_refresh_priority_expedited
boolean
    Choices:
  • no
  • yes
Expedited queue; highest priority.
route_refresh_priority_priority
integer
Output queue priority; higher is better.
secondary_independent_resolution
boolean
    Choices:
  • no
  • yes
Resolve FLOW routes in VRF table independent of VPN FLOW route.
set
boolean
    Choices:
  • no
  • yes
Set NLRI.
strip_nexthop
boolean
    Choices:
  • no
  • yes
Strip the next-hop from the outgoing flow update.
topology
list / elements=dictionary
Multi topology routing tables.
community
list / elements=string
Community to identify multi topology routes.
name
string
Specify topology name.
traffic_statistics
dictionary
Collect statistics for BGP label-switched paths
file
dictionary
Statistics file options.
filename
string
Name of file in which to write trace information.
files
integer
Maximum number of trace files.
no_world_readable
boolean
    Choices:
  • no
  • yes
Don't allow any user to read the log file.
size
integer
Maximum trace file size.
world_readable
boolean
    Choices:
  • no
  • yes
Don't allow any user to read the log file.
interval
integer
Time to collect statistics (seconds).
labeled_path
boolean
    Choices:
  • no
  • yes
Enable ingress labeled path statistics.
set
boolean
    Choices:
  • no
  • yes
Set traffic-statistics.
type
string
    Choices:
  • any
  • flow
  • labeled-unicast
  • multicast
  • segment-routing-te
  • unicast
  • signaling
  • auto-discovery-mspw
  • auto-discovery-only
Specify type of NLRI.
withdraw_priority_expedited
boolean
    Choices:
  • no
  • yes
Expedited queue; highest priority.
withdraw_priority_priority
integer
Output queue priority; higher is better.
afi
string
    Choices:
  • evpn
  • inet
  • inet-mdt
  • inet-mvpn
  • inet-vpn
  • inet6
  • inet6-mvpn
  • inet6-vpn
  • iso-vpn
  • l2vpn
  • route-target
  • traffic-engineering
address family.
neighbor_address
string
Specify neighbor address.
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the Junos device by executing the command show protocols bgp.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result
state
string
    Choices:
  • merged
  • replaced
  • overridden
  • deleted
  • parsed
  • gathered
  • rendered
The state the configuration should be left in.
State deleted only removes BGP address family attributes that this modules manages and does not negate the BGP neighbor address family completely. Thereby, preserving address-family related configurations under BGP group neighbor context.
To delete the address family associated to neighbor use junipernetworks.junos.junos_bgp_neighbor_address_family modules for prior cleanup.
Refer to examples for more details.

Notes

Note

  • This module requires the netconf system service be enabled on the device being managed.
  • This module works with connection netconf. See the Junos OS Platform Options.
  • Tested against JunOS v18.4R1

Examples

# Using merged
#
# Before state
# ------------
#
# admin# show protocols bgp
#
# [edit]

- name: Merge Junos BGP address family configuration
  junipernetworks.junos.junos_bgp_address_family:
    config:
      address_family:
        - afi: 'evpn'
          af_type:
            - type: 'signaling'
              accepted_prefix_limit:
                maximum: 20
                limit_threshold: 98
                idle_timeout_value: 2001
              damping: true
              defer_initial_multipath_build:
                maximum_delay: 2
        - afi: 'inet'
          af_type:
            - type: 'flow'
              legacy_redirect_ip_action:
                send: true
                receive: true
              loops: 4
              no_install: true
              output_queue_priority_expedited: true
              secondary_independent_resolution: true

            - type: 'unicast'
              extended_nexthop: true
              extended_nexthop_color: true
              local_ipv4_address: '9.9.9.9'

            - type: 'labeled-unicast'
              entropy_label:
                no_next_hop_validation: true
              explicit_null:
                connected_only: true
              per_prefix_label: true
              per_group_label: true
              prefix_limit:
                maximum: 20
                limit_threshold: 99
                forever: true
              resolve_vpn: true
              rib: 'inet.3'
              route_refresh_priority_expedited: true
              route_refresh_priority_priority: 3

            - type: 'any'
              accepted_prefix_limit:
                maximum: 20
                limit_threshold: 99
                idle_timeout_value: 2000
              damping: true
              defer_initial_multipath_build:
                maximum_delay: 2
              delay_route_advertisements:
                max_delay_route_age: 20
                max_delay_routing_uptime: 32000
                min_delay_inbound_convergence: 32000
                min_delay_routing_uptime: 23000
              graceful_restart_forwarding_state_bit: 'from-fib'
    state: merged

# After state
# -----------
#
# admin# show protocols bgp
# family inet {
#     unicast {
#         local-ipv4-address 9.9.9.9;
#         extended-nexthop;
#         extended-nexthop-color;
#     }
#     flow {
#         loops 4;
#         no-install;
#         output-queue-priority expedited;
#         legacy-redirect-ip-action {
#             receive;
#             send;
#         }
#         secondary-independent-resolution;
#     }
#     any {
#         accepted-prefix-limit {
#             maximum 20;
#             teardown 99 idle-timeout 2000;
#         }
#         damping;
#         delay-route-advertisements {
#             minimum-delay {
#                 routing-uptime 23000;
#                 inbound-convergence 32000;
#             }
#             maximum-delay {
#                 route-age 20;
#                 routing-uptime 32000;
#             }
#         }
#         defer-initial-multipath-build {
#             maximum-delay 2;
#         }
#         graceful-restart {
#             forwarding-state-bit from-fib;
#         }
#     }
#     labeled-unicast {
#         prefix-limit {
#             maximum 20;
#             teardown 99 idle-timeout forever;
#         }
#         route-refresh-priority priority 3;
#         per-prefix-label;
#         per-group-label;
#         rib {
#             inet.3;
#         }
#         explicit-null connected-only;
#         resolve-vpn;
#         entropy-label {
#             no-next-hop-validation;
#         }
#     }
# }
# family evpn {
#     signaling {
#         accepted-prefix-limit {
#             maximum 20;
#             teardown 98 idle-timeout 2001;
#         }
#         damping;
#         defer-initial-multipath-build {
#             maximum-delay 2;
#         }
#     }
# }
# Using replaced
#
# Before state
# ------------
#
# admin# show protocols bgp
# preference 2;
# hold-time 5;
# advertise-inactive;
# out-delay 10;
# bgp-error-tolerance {
#     malformed-route-limit 40000000;
# }
# authentication-algorithm md5;
# advertise-bgp-static {
#     policy static-to-bgp;
# }
# family inet {
#     unicast {
#         local-ipv4-address 9.9.9.9;
#         extended-nexthop;
#         extended-nexthop-color;
#     }
#     flow {
#         loops 4;
#         no-install;
#         output-queue-priority expedited;
#         legacy-redirect-ip-action {
#             receive;
#             send;
#         }
#         secondary-independent-resolution;
#     }
#     any {
#         accepted-prefix-limit {
#             maximum 20;
#             teardown 99 idle-timeout 2000;
#         }
#         damping;
#         delay-route-advertisements {
#             minimum-delay {
#                 routing-uptime 23000;
#                 inbound-convergence 32000;
#             }
#             maximum-delay {
#                 route-age 20;
#                 routing-uptime 32000;
#             }
#         }
#         defer-initial-multipath-build {
#             maximum-delay 2;
#         }
#         graceful-restart {
#             forwarding-state-bit from-fib;
#         }
#     }
#     labeled-unicast {
#         prefix-limit {
#             maximum 20;
#             teardown 99 idle-timeout forever;
#         }
#         route-refresh-priority priority 3;
#         per-prefix-label;
#         per-group-label;
#         rib {
#             inet.3;
#         }
#         explicit-null connected-only;
#         resolve-vpn;
#         entropy-label {
#             no-next-hop-validation;
#         }
#     }
# }
# family evpn {
#     signaling {
#         accepted-prefix-limit {
#             maximum 20;
#             teardown 98 idle-timeout 2001;
#         }
#         damping;
#         defer-initial-multipath-build {
#             maximum-delay 2;
#         }
#     }
# }

- name: Replace existing Junos BGP address family config with provided config
  junipernetworks.junos.junos_bgp_address_family:
   config:
     address_family:
       - afi: 'evpn'
         af_type:
           - type: 'signaling'
             accepted_prefix_limit:
               maximum: 21
               limit_threshold: 99
               idle_timeout_value: 2002
             delay_route_advertisements:
               max_delay_route_age: 20
               max_delay_routing_uptime: 32000
               min_delay_inbound_convergence: 32000
               min_delay_routing_uptime: 23000
             damping: true
   state: replaced

# After state
# -----------
#
# admin# show protocols bgp
# preference 2;
# hold-time 5;
# advertise-inactive;
# out-delay 10;
# bgp-error-tolerance {
#     malformed-route-limit 40000000;
# }
# authentication-algorithm md5;
# advertise-bgp-static {
#     policy static-to-bgp;
# }
# family inet {
#     unicast {
#         local-ipv4-address 9.9.9.9;
#         extended-nexthop;
#         extended-nexthop-color;
#     }
#     flow {
#         loops 4;
#         no-install;
#         output-queue-priority expedited;
#         legacy-redirect-ip-action {
#             receive;
#             send;
#         }
#         secondary-independent-resolution;
#     }
#     any {
#         accepted-prefix-limit {
#             maximum 20;
#             teardown 99 idle-timeout 2000;
#         }
#         damping;
#         delay-route-advertisements {
#             minimum-delay {
#                 routing-uptime 23000;
#                 inbound-convergence 32000;
#             }
#             maximum-delay {
#                 route-age 20;
#                 routing-uptime 32000;
#             }
#         }
#         defer-initial-multipath-build {
#             maximum-delay 2;
#         }
#         graceful-restart {
#             forwarding-state-bit from-fib;
#         }
#     }
#     labeled-unicast {
#         prefix-limit {
#             maximum 20;
#             teardown 99 idle-timeout forever;
#         }
#         route-refresh-priority priority 3;
#         per-prefix-label;
#         per-group-label;
#         rib {
#             inet.3;
#         }
#         explicit-null connected-only;
#         resolve-vpn;
#         entropy-label {
#             no-next-hop-validation;
#         }
#     }
# }
# family evpn {
#     signaling {
#         accepted-prefix-limit {
#             maximum 21;
#             teardown 99 idle-timeout 2002;
#         }
#         damping;
#         delay-route-advertisements {
#             minimum-delay {
#                 routing-uptime 23000;
#                 inbound-convergence 32000;
#             }
#             maximum-delay {
#                 route-age 20;
#                 routing-uptime 32000;
#             }
#         }
#     }
# }
# Using overridden
#
# Before state
# ------------
#
# admin# show protocols bgp
# family inet {
#     unicast {
#         local-ipv4-address 9.9.9.9;
#         extended-nexthop;
#         extended-nexthop-color;
#     }
#     flow {
#         loops 4;
#         no-install;
#         output-queue-priority expedited;
#         legacy-redirect-ip-action {
#             receive;
#             send;
#         }
#         secondary-independent-resolution;
#     }
#     any {
#         accepted-prefix-limit {
#             maximum 20;
#             teardown 99 idle-timeout 2000;
#         }
#         damping;
#         delay-route-advertisements {
#             minimum-delay {
#                 routing-uptime 23000;
#                 inbound-convergence 32000;
#             }
#             maximum-delay {
#                 route-age 20;
#                 routing-uptime 32000;
#             }
#         }
#         defer-initial-multipath-build {
#             maximum-delay 2;
#         }
#         graceful-restart {
#             forwarding-state-bit from-fib;
#         }
#     }
#     labeled-unicast {
#         prefix-limit {
#             maximum 20;
#             teardown 99 idle-timeout forever;
#         }
#         route-refresh-priority priority 3;
#         per-prefix-label;
#         per-group-label;
#         rib {
#             inet.3;
#         }
#         explicit-null connected-only;
#         resolve-vpn;
#         entropy-label {
#             no-next-hop-validation;
#         }
#     }
# }
# family evpn {
#     signaling {
#         accepted-prefix-limit {
#             maximum 20;
#             teardown 98 idle-timeout 2001;
#         }
#         damping;
#         defer-initial-multipath-build {
#             maximum-delay 2;
#         }
#     }
# }

- name: Override Junos BGP address family config
  junipernetworks.junos.junos_bgp_address_family:
   config:
     address_family:
       - afi: 'evpn'
         af_type:
           - type: 'signaling'
             accepted_prefix_limit:
               maximum: 21
               limit_threshold: 99
               idle_timeout_value: 2002
             delay_route_advertisements:
               max_delay_route_age: 20
               max_delay_routing_uptime: 32000
               min_delay_inbound_convergence: 32000
               min_delay_routing_uptime: 23000
             damping: true
   state: overridden

# After state
# -----------
#
# admin# show protocols bgp
# family evpn {
#     signaling {
#         accepted-prefix-limit {
#             maximum 21;
#             teardown 99 idle-timeout 2002;
#         }
#         damping;
#         delay-route-advertisements {
#             minimum-delay {
#                 routing-uptime 23000;
#                 inbound-convergence 32000;
#             }
#             maximum-delay {
#                 route-age 20;
#                 routing-uptime 32000;
#             }
#         }
#     }
# }

# Using deleted
#
# Before state
# ------------
#
# admin# show protocols bgp
# preference 2;
# hold-time 5;
# advertise-inactive;
# out-delay 10;
# family inet {
#     unicast {
#         local-ipv4-address 9.9.9.9;
#         extended-nexthop;
#         extended-nexthop-color;
#     }
#     flow {
#         loops 4;
#         no-install;
#         output-queue-priority expedited;
#         legacy-redirect-ip-action {
#             receive;
#             send;
#         }
#         secondary-independent-resolution;
#     }
#     any {
#         accepted-prefix-limit {
#             maximum 20;
#             teardown 99 idle-timeout 2000;
#         }
#         damping;
#         delay-route-advertisements {
#             minimum-delay {
#                 routing-uptime 23000;
#                 inbound-convergence 32000;
#             }
#             maximum-delay {
#                 route-age 20;
#                 routing-uptime 32000;
#             }
#         }
#         defer-initial-multipath-build {
#             maximum-delay 2;
#         }
#         graceful-restart {
#             forwarding-state-bit from-fib;
#         }
#     }
#     labeled-unicast {
#         prefix-limit {
#             maximum 20;
#             teardown 99 idle-timeout forever;
#         }
#         route-refresh-priority priority 3;
#         per-prefix-label;
#         per-group-label;
#         rib {
#             inet.3;
#         }
#         explicit-null connected-only;
#         resolve-vpn;
#         entropy-label {
#             no-next-hop-validation;
#         }
#     }
# }
# family evpn {
#     signaling {
#         accepted-prefix-limit {
#             maximum 20;
#             teardown 98 idle-timeout 2001;
#         }
#         damping;
#         defer-initial-multipath-build {
#             maximum-delay 2;
#         }
#     }
# }

- name: Delete Junos BGP address family config based on the afi
  junipernetworks.junos.junos_bgp_address_family:
   config:
    address_family:
      - afi: 'inet'
   state: deleted

# After state
# -----------
#
# admin# show protocols bgp
# preference 2;
# hold-time 5;
# advertise-inactive;
# out-delay 10;
# family evpn {
#     signaling {
#         accepted-prefix-limit {
#             maximum 20;
#             teardown 98 idle-timeout 2001;
#         }
#         damping;
#         defer-initial-multipath-build {
#             maximum-delay 2;
#         }
#     }
# }

# Using deleted
#
# Before state
# ------------
#
# admin# show protocols bgp
# preference 2;
# hold-time 5;
# advertise-inactive;
# out-delay 10;
# family inet {
#     unicast {
#         local-ipv4-address 9.9.9.9;
#         extended-nexthop;
#         extended-nexthop-color;
#     }
#     flow {
#         loops 4;
#         no-install;
#         output-queue-priority expedited;
#         legacy-redirect-ip-action {
#             receive;
#             send;
#         }
#         secondary-independent-resolution;
#     }
#     any {
#         accepted-prefix-limit {
#             maximum 20;
#             teardown 99 idle-timeout 2000;
#         }
#         damping;
#         delay-route-advertisements {
#             minimum-delay {
#                 routing-uptime 23000;
#                 inbound-convergence 32000;
#             }
#             maximum-delay {
#                 route-age 20;
#                 routing-uptime 32000;
#             }
#         }
#         defer-initial-multipath-build {
#             maximum-delay 2;
#         }
#         graceful-restart {
#             forwarding-state-bit from-fib;
#         }
#     }
#     labeled-unicast {
#         prefix-limit {
#             maximum 20;
#             teardown 99 idle-timeout forever;
#         }
#         route-refresh-priority priority 3;
#         per-prefix-label;
#         per-group-label;
#         rib {
#             inet.3;
#         }
#         explicit-null connected-only;
#         resolve-vpn;
#         entropy-label {
#             no-next-hop-validation;
#         }
#     }
# }
# family evpn {
#     signaling {
#         accepted-prefix-limit {
#             maximum 20;
#             teardown 98 idle-timeout 2001;
#         }
#         damping;
#         defer-initial-multipath-build {
#             maximum-delay 2;
#         }
#     }
# }

- name: Delete complete Junos BGP address family config
  junipernetworks.junos.junos_bgp_address_family:
   config:
   state: deleted

# After state
# -----------
#
# admin# show protocols bgp
# preference 2;
# hold-time 5;
# advertise-inactive;
# out-delay 10;


# Using gathered
#
# Before state
# ------------
#
# admin# show protocols bgp
# preference 2;
# hold-time 5;
# advertise-inactive;
# out-delay 10;
# family inet {
#     unicast {
#         local-ipv4-address 9.9.9.9;
#         extended-nexthop;
#         extended-nexthop-color;
#     }
#     flow {
#         loops 4;
#         no-install;
#         output-queue-priority expedited;
#         legacy-redirect-ip-action {
#             receive;
#             send;
#         }
#         secondary-independent-resolution;
#     }
#     any {
#         accepted-prefix-limit {
#             maximum 20;
#             teardown 99 idle-timeout 2000;
#         }
#         damping;
#         delay-route-advertisements {
#             minimum-delay {
#                 routing-uptime 23000;
#                 inbound-convergence 32000;
#             }
#             maximum-delay {
#                 route-age 20;
#                 routing-uptime 32000;
#             }
#         }
#         defer-initial-multipath-build {
#             maximum-delay 2;
#         }
#         graceful-restart {
#             forwarding-state-bit from-fib;
#         }
#     }
#     labeled-unicast {
#         prefix-limit {
#             maximum 20;
#             teardown 99 idle-timeout forever;
#         }
#         route-refresh-priority priority 3;
#         per-prefix-label;
#         per-group-label;
#         rib {
#             inet.3;
#         }
#         explicit-null connected-only;
#         resolve-vpn;
#         entropy-label {
#             no-next-hop-validation;
#         }
#     }
# }
# family evpn {
#     signaling {
#         accepted-prefix-limit {
#             maximum 20;
#             teardown 98 idle-timeout 2001;
#         }
#         damping;
#         defer-initial-multipath-build {
#             maximum-delay 2;
#         }
#     }
# }

- name: Gather Junos BGP address family config
  junipernetworks.junos.junos_bgp_address_family:
    config:
    state: gathered
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#    "gathered": {
#         "address_family": [
#             {
#                 "af_type": [
#                     {
#                         "accepted_prefix_limit": {
#                             "idle_timeout_value": 2001,
#                             "limit_threshold": 98,
#                             "maximum": 20
#                         },
#                         "damping": true,
#                         "defer_initial_multipath_build": {
#                             "maximum_delay": 2
#                         },
#                         "type": "signaling"
#                     }
#                 ],
#                 "afi": "evpn"
#             },
#             {
#                 "af_type": [
#                     {
#                         "accepted_prefix_limit": {
#                             "idle_timeout_value": 2000,
#                             "limit_threshold": 99,
#                             "maximum": 20
#                         },
#                         "damping": true,
#                         "defer_initial_multipath_build": {
#                             "maximum_delay": 2
#                         },
#                         "delay_route_advertisements": {
#                             "max_delay_route_age": 20,
#                             "max_delay_routing_uptime": 32000,
#                             "min_delay_inbound_convergence": 32000,
#                             "min_delay_routing_uptime": 23000
#                         },
#                         "graceful_restart_forwarding_state_bit": "from-fib",
#                         "type": "any"
#                     },
#                     {
#                         "legacy_redirect_ip_action": {
#                             "receive": true,
#                             "send": true
#                         },
#                         "loops": 4,
#                         "no_install": true,
#                         "output_queue_priority_expedited": true,
#                         "secondary_independent_resolution": true,
#                         "type": "flow"
#                     },
#                     {
#                         "entropy_label": {
#                             "no_next_hop_validation": true
#                         },
#                         "explicit_null": {
#                             "connected_only": true
#                         },
#                         "per_group_label": true,
#                         "per_prefix_label": true,
#                         "prefix_limit": {
#                             "forever": true,
#                             "limit_threshold": 99,
#                             "maximum": 20
#                         },
#                         "resolve_vpn": true,
#                         "rib": "inet.3",
#                         "route_refresh_priority_priority": 3,
#                         "type": "labeled-unicast"
#                     },
#                     {
#                         "extended_nexthop": true,
#                         "extended_nexthop_color": true,
#                         "local_ipv4_address": "9.9.9.9",
#                         "type": "unicast"
#                     }
#                 ],
#                 "afi": "inet"
#             }
#         ]
#     }
#
# Using parsed
# parsed.cfg
# ------------
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
#     <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
#         <version>18.4R1-S2.4</version>
#         <protocols>
#             <bgp>
#                 <preference>2</preference>
#                 <hold-time>5</hold-time>
#                 <advertise-inactive/>
#                 <out-delay>10</out-delay>
#                 <family>
#                     <inet>
#                         <unicast>
#                             <local-ipv4-address>9.9.9.9</local-ipv4-address>
#                             <extended-nexthop/>
#                             <extended-nexthop-color/>
#                         </unicast>
#                         <flow>
#                             <loops>
#                                 <loops>4</loops>
#                             </loops>
#                             <no-install/>
#                             <output-queue-priority>
#                                 <expedited/>
#                             </output-queue-priority>
#                             <legacy-redirect-ip-action>
#                                 <receive/>
#                                 <send/>
#                             </legacy-redirect-ip-action>
#                             <secondary-independent-resolution/>
#                         </flow>
#                         <any>
#                             <accepted-prefix-limit>
#                                 <maximum>20</maximum>
#                                 <teardown>
#                                     <limit-threshold>99</limit-threshold>
#                                     <idle-timeout>
#                                         <timeout>2000</timeout>
#                                     </idle-timeout>
#                                 </teardown>
#                             </accepted-prefix-limit>
#                             <damping/>
#                             <delay-route-advertisements>
#                                 <minimum-delay>
#                                     <routing-uptime>23000</routing-uptime>
#                                     <inbound-convergence>32000</inbound-convergence>
#                                 </minimum-delay>
#                                 <maximum-delay>
#                                     <route-age>20</route-age>
#                                     <routing-uptime>32000</routing-uptime>
#                                 </maximum-delay>
#                             </delay-route-advertisements>
#                             <defer-initial-multipath-build>
#                                 <maximum-delay>2</maximum-delay>
#                             </defer-initial-multipath-build>
#                             <graceful-restart>
#                                 <forwarding-state-bit>from-fib</forwarding-state-bit>
#                             </graceful-restart>
#                         </any>
#                         <labeled-unicast>
#                             <prefix-limit>
#                                 <maximum>20</maximum>
#                                 <teardown>
#                                     <limit-threshold>99</limit-threshold>
#                                     <idle-timeout>
#                                         <forever/>
#                                     </idle-timeout>
#                                 </teardown>
#                             </prefix-limit>
#                             <route-refresh-priority>
#                                 <priority>3</priority>
#                             </route-refresh-priority>
#                             <per-prefix-label/>
#                             <per-group-label/>
#                             <rib>
#                                 <inet.3/>
#                             </rib>
#                             <explicit-null>
#                                 <connected-only/>
#                             </explicit-null>
#                             <resolve-vpn/>
#                             <entropy-label>
#                                 <no-next-hop-validation/>
#                             </entropy-label>
#                         </labeled-unicast>
#                     </inet>
#                     <evpn>
#                         <signaling>
#                             <accepted-prefix-limit>
#                                 <maximum>20</maximum>
#                                 <teardown>
#                                     <limit-threshold>98</limit-threshold>
#                                     <idle-timeout>
#                                         <timeout>2001</timeout>
#                                     </idle-timeout>
#                                 </teardown>
#                             </accepted-prefix-limit>
#                             <damping/>
#                             <defer-initial-multipath-build>
#                                 <maximum-delay>2</maximum-delay>
#                             </defer-initial-multipath-build>
#                         </signaling>
#                     </evpn>
#                 </family>
#             </bgp>
#             <ospf3>
#                 <area>
#                     <name>0.0.0.100</name>
#                     <stub>
#                         <default-metric>200</default-metric>
#                     </stub>
#                     <interface>
#                         <name>so-0/0/0.0</name>
#                         <metric>5</metric>
#                         <priority>3</priority>
#                     </interface>
#                 </area>
#             </ospf3>
#         </protocols>
#         <routing-options>
#             <static>
#                 <route>
#                     <name>172.16.17.0/24</name>
#                     <discard />
#                 </route>
#             </static>
#             <router-id>10.200.16.75</router-id>
#             <autonomous-system>
#                 <as-number>65432</as-number>
#             </autonomous-system>
#         </routing-options>
#     </configuration>
# </rpc-reply>


- name: Parsed the bgp address family running config to get the facts
  junipernetworks.junos.junos_bgp_address_family:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "parsed":  {
#         "address_family": [
#             {
#                 "af_type": [
#                     {
#                         "accepted_prefix_limit": {
#                             "idle_timeout_value": 2001,
#                             "limit_threshold": 98,
#                             "maximum": 20
#                         },
#                         "damping": true,
#                         "defer_initial_multipath_build": {
#                             "maximum_delay": 2
#                         },
#                         "type": "signaling"
#                     }
#                 ],
#                 "afi": "evpn"
#             },
#             {
#                 "af_type": [
#                     {
#                         "accepted_prefix_limit": {
#                             "idle_timeout_value": 2000,
#                             "limit_threshold": 99,
#                             "maximum": 20
#                         },
#                         "damping": true,
#                         "defer_initial_multipath_build": {
#                             "maximum_delay": 2
#                         },
#                         "delay_route_advertisements": {
#                             "max_delay_route_age": 20,
#                             "max_delay_routing_uptime": 32000,
#                             "min_delay_inbound_convergence": 32000,
#                             "min_delay_routing_uptime": 23000
#                         },
#                         "graceful_restart_forwarding_state_bit": "from-fib",
#                         "type": "any"
#                     },
#                     {
#                         "legacy_redirect_ip_action": {
#                             "receive": true,
#                             "send": true
#                         },
#                         "loops": 4,
#                         "no_install": true,
#                         "output_queue_priority_expedited": true,
#                         "secondary_independent_resolution": true,
#                         "type": "flow"
#                     },
#                     {
#                         "entropy_label": {
#                             "no_next_hop_validation": true
#                         },
#                         "explicit_null": {
#                             "connected_only": true
#                         },
#                         "per_group_label": true,
#                         "per_prefix_label": true,
#                         "prefix_limit": {
#                             "forever": true,
#                             "limit_threshold": 99,
#                             "maximum": 20
#                         },
#                         "resolve_vpn": true,
#                         "rib": "inet.3",
#                         "route_refresh_priority_priority": 3,
#                         "type": "labeled-unicast"
#                     },
#                     {
#                         "extended_nexthop": true,
#                         "extended_nexthop_color": true,
#                         "local_ipv4_address": "9.9.9.9",
#                         "type": "unicast"
#                     }
#                 ],
#                 "afi": "inet"
#             }
#         ]
#     }
# Using rendered
#
#
- name: Render the commands for provided  configuration
  junipernetworks.junos.junos_bgp_address_family:
    config:
      address_family:
        - afi: 'evpn'
          af_type:
            - type: 'signaling'
              accepted_prefix_limit:
                maximum: 20
                limit_threshold: 98
                idle_timeout_value: 2001
              damping: true
              defer_initial_multipath_build:
                maximum_delay: 2
        - afi: 'inet'
          af_type:
            - type: 'flow'
              legacy_redirect_ip_action:
                send: true
                receive: true
              loops: 4
              no_install: true
              output_queue_priority_expedited: true
              secondary_independent_resolution: true

            - type: 'unicast'
              extended_nexthop: true
              extended_nexthop_color: true
              local_ipv4_address: '9.9.9.9'

            - type: 'labeled-unicast'
              entropy_label:
                no_next_hop_validation: true
              explicit_null:
                connected_only: true
              per_prefix_label: true
              per_group_label: true
              prefix_limit:
                maximum: 20
                limit_threshold: 99
                forever: true
              resolve_vpn: true
              rib: 'inet.3'
              route_refresh_priority_expedited: true
              route_refresh_priority_priority: 3

            - type: 'any'
              accepted_prefix_limit:
                maximum: 20
                limit_threshold: 99
                idle_timeout_value: 2000
              damping: true
              defer_initial_multipath_build:
                maximum_delay: 2
              delay_route_advertisements:
                max_delay_route_age: 20
                max_delay_routing_uptime: 32000
                min_delay_inbound_convergence: 32000
                min_delay_routing_uptime: 23000
              graceful_restart_forwarding_state_bit: 'from-fib'
    state: rendered

#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "rendered": "<nc:protocols xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
# <nc:bgp><nc:family><nc:evpn><nc:signaling><nc:accepted-prefix-limit><nc:maximum>20</nc:maximum>
# <nc:teardown><nc:limit-threshold>98</nc:limit-threshold><nc:idle-timeout><nc:timeout>2001</nc:timeout>
# </nc:idle-timeout></nc:teardown></nc:accepted-prefix-limit><nc:damping/><nc:defer-initial-multipath-build>
# <nc:maximum-delay>2</nc:maximum-delay></nc:defer-initial-multipath-build></nc:signaling>
# </nc:evpn><nc:inet><nc:flow><nc:legacy-redirect-ip-action><nc:send/><nc:receive/>
# </nc:legacy-redirect-ip-action><nc:loops>4</nc:loops><nc:no-install/>
# <nc:output-queue-priority><nc:expedited/></nc:output-queue-priority>
# <nc:secondary-independent-resolution/></nc:flow><nc:unicast><nc:extended-nexthop/>
# <nc:extended-nexthop-color/><nc:local-ipv4-address>9.9.9.9</nc:local-ipv4-address>
# </nc:unicast><nc:labeled-unicast><nc:entropy-label><nc:no-next-hop-validation/>
# </nc:entropy-label><nc:explicit-null><nc:connected-only/></nc:explicit-null>
# <nc:per-prefix-label/><nc:per-group-label/><nc:prefix-limit><nc:maximum>20</nc:maximum>
# <nc:teardown>99<nc:idle-timeout><nc:forever/></nc:idle-timeout></nc:teardown>
# </nc:prefix-limit><nc:resolve-vpn/><nc:rib><nc:inet.3/></nc:rib><nc:route-refresh-priority>
# <nc:expedited/><nc:priority>3</nc:priority></nc:route-refresh-priority></nc:labeled-unicast>
# <nc:any><nc:accepted-prefix-limit><nc:maximum>20</nc:maximum><nc:teardown>
# <nc:limit-threshold>99</nc:limit-threshold><nc:idle-timeout><nc:timeout>2000</nc:timeout>
# </nc:idle-timeout></nc:teardown></nc:accepted-prefix-limit><nc:damping/>
# <nc:defer-initial-multipath-build><nc:maximum-delay>2</nc:maximum-delay>
# </nc:defer-initial-multipath-build><nc:delay-route-advertisements>
# <nc:maximum-delay><nc:route-age>20</nc:route-age><nc:routing-uptime>32000</nc:routing-uptime>
# </nc:maximum-delay><nc:minimum-delay><nc:inbound-convergence>32000</nc:inbound-convergence>
# <nc:routing-uptime>23000</nc:routing-uptime></nc:minimum-delay></nc:delay-route-advertisements>
# <nc:graceful-restart><nc:forwarding-state-bit>from-fib</nc:forwarding-state-bit>
# </nc:graceful-restart></nc:any></nc:inet></nc:family></nc:bgp></nc:protocols>"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
after
dictionary
when changed
The resulting configuration model invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
dictionary
always
The configuration prior to the model invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list / elements=string
always
The set of commands pushed to the remote device.

Sample:
['<nc:protocols xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"> <nc:bgp><nc:family><nc:evpn><nc:signaling><nc:accepted-prefix-limit> <nc:maximum>21</nc:maximum><nc:teardown><nc:limit-threshold>99</nc:limit-threshold> <nc:idle-timeout><nc:timeout>2002</nc:timeout></nc:idle-timeout> </nc:teardown></nc:accepted-prefix-limit><nc:damping/> <nc:delay-route-advertisements><nc:maximum-delay> <nc:route-age>20</nc:route-age><nc:routing-uptime>32000</nc:routing-uptime> </nc:maximum-delay><nc:minimum-delay><nc:inbound-convergence>32000</nc:inbound-convergence> <nc:routing-uptime>23000</nc:routing-uptime></nc:minimum-delay></nc:delay-route-advertisements> </nc:signaling></nc:evpn></nc:family></nc:bgp></nc:protocols>', 'xml 2', 'xml 3']


Authors

  • Rohit Thakur (@rohitthakur2590)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/junipernetworks/junos/junos_bgp_address_family_module.html