cisco.meraki.meraki_mr_rf_profile – Manage RF profiles for Meraki wireless networks

Note

This plugin is part of the cisco.meraki collection (version 2.5.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.meraki.

To use it in a playbook, specify: cisco.meraki.meraki_mr_rf_profile.

Synopsis

  • Allows for configuration of radio frequency (RF) profiles in Meraki MR wireless networks.

Parameters

Parameter Choices/Defaults Comments
ap_band_settings
dictionary
Settings that will be enabled if selectionType is set to 'ap'.
band_steering_enabled
boolean
    Choices:
  • no
  • yes
Steers client to most open band.
mode
string
    Choices:
  • 2.4ghz
  • 5ghz
  • dual
Sets which RF band the AP will support.

aliases: band_operation_mode
auth_key
string / required
Authentication key provided by the dashboard. Required if environmental variable MERAKI_KEY is not set.
band_selection_type
string
    Choices:
  • ssid
  • ap
Sets whether band selection is assigned per access point or SSID.
This param is required on creation.
client_balancing_enabled
boolean
    Choices:
  • no
  • yes
Steers client to best available access point.
five_ghz_settings
dictionary
Settings related to 5Ghz band.
channel_width
string
    Choices:
  • auto
  • 20
  • 40
  • 80
Sets channel width (MHz) for 5Ghz band.
max_power
integer
Sets max power (dBm) of 5Ghz band.
Can be integer between 8 and 30.
min_bitrate
integer
    Choices:
  • 6
  • 9
  • 12
  • 18
  • 24
  • 36
  • 48
  • 54
Sets minimum bitrate (Mbps) of 5Ghz band.
min_power
integer
Sets minmimum power (dBm) of 5Ghz band.
Can be integer between 8 and 30.
rxsop
integer
The RX-SOP level controls the sensitivity of the radio.
It is strongly recommended to use RX-SOP only after consulting a wireless expert.
RX-SOP can be configured in the range of -65 to -95 (dBm).
valid_auto_channels
list / elements=integer
    Choices:
  • 36
  • 40
  • 44
  • 48
  • 52
  • 56
  • 60
  • 64
  • 100
  • 104
  • 108
  • 112
  • 116
  • 120
  • 124
  • 128
  • 132
  • 136
  • 140
  • 144
  • 149
  • 153
  • 157
  • 161
  • 165
Sets valid auto channels for 5Ghz band.
host
string
Default:
"api.meraki.com"
Hostname for Meraki dashboard.
Can be used to access regional Meraki environments, such as China.
internal_error_retry_time
integer
Default:
60
Number of seconds to retry if server returns an internal server error.
min_bitrate_type
string
    Choices:
  • band
  • ssid
Type of minimum bitrate.
name
string
The unique name of the new profile.
This param is required on creation.
net_id
string
ID of network.
net_name
string
Name of network.
org_id
string
ID of organization.
org_name
string
Name of organization.

aliases: organization
output_format
string
    Choices:
  • snakecase
  • camelcase
Instructs module whether response keys should be snake case (ex. net_id) or camel case (ex. netId).
output_level
string
    Choices:
  • debug
  • normal
Set amount of debug output during module execution.
profile_id
string
Unique identifier of existing RF profile.

aliases: id
rate_limit_retry_time
integer
Default:
165
Number of seconds to retry if rate limiter is triggered.
state
string
    Choices:
  • present
  • query
  • absent
Query, edit, or delete wireless RF profile settings.
timeout
integer
Default:
30
Time to timeout for HTTP requests.
two_four_ghz_settings
dictionary
Settings related to 2.4Ghz band
ax_enabled
boolean
    Choices:
  • no
  • yes
Determines whether ax radio on 2.4Ghz band is on or off.
max_power
integer
Sets max power (dBm) of 2.4Ghz band.
Can be integer between 5 and 30.
min_bitrate
float
    Choices:
  • 1
  • 2
  • 5.5
  • 6
  • 9
  • 11
  • 12
  • 18
  • 24
  • 36
  • 48
  • 54
Sets minimum bitrate (Mbps) of 2.4Ghz band.
min_power
integer
Sets minmimum power (dBm) of 2.4Ghz band.
Can be integer between 5 and 30.
rxsop
integer
The RX-SOP level controls the sensitivity of the radio.
It is strongly recommended to use RX-SOP only after consulting a wireless expert.
RX-SOP can be configured in the range of -65 to -95 (dBm).
valid_auto_channels
list / elements=integer
    Choices:
  • 1
  • 6
  • 11
Sets valid auto channels for 2.4Ghz band.
use_https
boolean
    Choices:
  • no
  • yes
If no, it will use HTTP. Otherwise it will use HTTPS.
Only useful for internal Meraki developers.
use_proxy
boolean
    Choices:
  • no
  • yes
If no, it will not use a proxy, even if one is defined in an environment variable on the target hosts.
validate_certs
boolean
    Choices:
  • no
  • yes
Whether to validate HTTP certificates.

Notes

Note

  • More information about the Meraki API can be found at https://dashboard.meraki.com/api_docs.
  • Some of the options are likely only used for developers within Meraki.
  • As of Ansible 2.9, Meraki modules output keys as snake case. To use camel case, set the ANSIBLE_MERAKI_FORMAT environment variable to camelcase.
  • Ansible’s Meraki modules will stop supporting camel case output in Ansible 2.13. Please update your playbooks.
  • Check Mode downloads the current configuration from the dashboard, then compares changes against this download. Check Mode will report changed if there are differences in the configurations, but does not submit changes to the API for validation of change.

Examples

- name: Create RF profile in check mode
  meraki_mr_rf_profile:
    auth_key: abc123
    org_name: YourOrg
    net_name: YourNet
    state: present
    name: Test Profile
    band_selection_type: ap
    client_balancing_enabled: True
    ap_band_settings:
        mode: dual
        band_steering_enabled: true
    five_ghz_settings:
      max_power: 10
      min_bitrate: 12
      min_power: 8
      rxsop: -65
      channel_width: 20
      valid_auto_channels:
        - 36
        - 40
        - 44
    two_four_ghz_settings:
      max_power: 10
      min_bitrate: 12
      min_power: 8
      rxsop: -65
      ax_enabled: false
      valid_auto_channels:
        - 1
  delegate_to: localhost

- name: Query all RF profiles
  meraki_mr_rf_profile:
    auth_key: abc123
    org_name: YourOrg
    net_name: YourNet
    state: query
  delegate_to: localhost

- name: Query one RF profile by ID
  meraki_mr_rf_profile:
    auth_key: abc123
    org_name: YourOrg
    net_name: YourNet
    state: query
    profile_id: '{{ profile_id }}'
  delegate_to: localhost

- name: Update profile
  meraki_mr_rf_profile:
    auth_key: abc123
    org_name: YourOrg
    net_name: YourNet
    state: present
    profile_id: 12345
    band_selection_type: ap
    client_balancing_enabled: True
    ap_band_settings:
        mode: dual
        band_steering_enabled: true
    five_ghz_settings:
      max_power: 10
      min_bitrate: 12
      min_power: 8
      rxsop: -65
      channel_width: 20
      valid_auto_channels:
        - 36
        - 44
    two_four_ghz_settings:
      max_power: 10
      min_bitrate: 12
      min_power: 8
      rxsop: -75
      ax_enabled: false
      valid_auto_channels:
        - 1
  delegate_to: localhost

- name: Delete RF profile
  meraki_mr_rf_profile:
    auth_key: abc123
    org_name: YourOrg
    net_name: YourNet
    state: absent
    profile_id: 12345
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
data
complex
success
List of wireless RF profile settings.

ap_band_settings
complex
success
Settings that will be enabled if selectionType is set to 'ap'.

band_steering_enabled
boolean
success
Steers client to most open band.

Sample:
True
mode
string
success
Sets which RF band the AP will support.

Sample:
dual
band_selection_type
string
success
Sets whether band selection is assigned per access point or SSID.
This param is required on creation.

Sample:
ap
client_balancing_enabled
boolean
success
Steers client to best available access point.

Sample:
True
five_ghz_settings
complex
success
Settings related to 5Ghz band.

channel_width
string
success
Sets channel width (MHz) for 5Ghz band.

Sample:
auto
max_power
integer
success
Sets max power (dBm) of 5Ghz band.
Can be integer between 8 and 30.

Sample:
12
min_bitrate
integer
success
Sets minimum bitrate (Mbps) of 5Ghz band.

Sample:
6
min_power
integer
success
Sets minmimum power (dBm) of 5Ghz band.
Can be integer between 8 and 30.

Sample:
12
rxsop
integer
success
The RX-SOP level controls the sensitivity of the radio.

Sample:
-70
valid_auto_channels
list / elements=string
success
Sets valid auto channels for 5Ghz band.

id
string
success
Unique identifier of existing RF profile.

Sample:
12345
min_bitrate_type
string
success
Type of minimum bitrate.

Sample:
ssid
name
string
success
The unique name of the new profile.
This param is required on creation.

Sample:
Guest RF profile
two_four_ghz_settings
complex
success
Settings related to 2.4Ghz band

ax_enabled
boolean
success
Determines whether ax radio on 2.4Ghz band is on or off.

Sample:
True
max_power
integer
success
Sets max power (dBm) of 2.4Ghz band.

Sample:
12
min_bitrate
float
success
Sets minimum bitrate (Mbps) of 2.4Ghz band.

Sample:
5.5
min_power
integer
success
Sets minmimum power (dBm) of 2.4Ghz band.

Sample:
12
rxsop
integer
success
The RX-SOP level controls the sensitivity of the radio.

Sample:
-70
valid_auto_channels
list / elements=string
success
Sets valid auto channels for 2.4Ghz band.

Sample:
6


Authors

  • Kevin Breit (@kbreit)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/cisco/meraki/meraki_mr_rf_profile_module.html