junipernetworks.junos.junos_lldp_global – LLDP resource module

Note

This plugin is part of the junipernetworks.junos collection (version 2.6.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install junipernetworks.junos.

To use it in a playbook, specify: junipernetworks.junos.junos_lldp_global.

New in version 1.0.0: of junipernetworks.junos

Synopsis

  • This module manages link layer discovery protocol (LLDP) attributes on Juniper JUNOS devices.

Note

This module has a corresponding action plugin.

Requirements

The below requirements are needed on the host that executes this module.

  • ncclient (>=v0.6.4)

Parameters

Parameter Choices/Defaults Comments
config
dictionary
The list of link layer discovery protocol attribute configurations
address
string
This argument sets the management address from LLDP.
enabled
boolean
    Choices:
  • no
  • yes
This argument is a boolean value to enabled or disable LLDP.
hold_multiplier
integer
Specify the number of seconds that LLDP information is held before it is discarded. The multiplier value is used in combination with the interval value.
interval
integer
Frequency at which LLDP advertisements are sent (in seconds).
transmit_delay
integer
Specify the number of seconds the device waits before sending advertisements to neighbors after a change is made in local system.
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the Junos device by executing the command show protocols lldp.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result
state
string
    Choices:
  • merged
  • replaced
  • deleted
  • gathered
  • rendered
  • parsed
The state of the configuration after module completion.

Notes

Note

  • This module requires the netconf system service be enabled on the remote device being managed.
  • Tested against vSRX JUNOS version 18.4R1.
  • This module works with connection netconf. See the Junos OS Platform Options.

Examples

# Using merged
# Before state:
# -------------
# user@junos01# # show protocols lldp
#
- name: Merge provided configuration with device configuration
  junipernetworks.junos.junos_lldp_global:
    config:
      interval: 10000
      address: 10.1.1.1
      transmit_delay: 400
      hold_multiplier: 10
    state: merged

# After state:
# -------------
# user@junos01# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# transmit-delay 400;
# hold-multiplier 10;

# Using replaced
# Before state:
# -------------
# user@junos01# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# transmit-delay 400;
# hold-multiplier 10;

- name: Replace provided configuration with device configuration
  junipernetworks.junos.junos_lldp_global:
    config:
      address: 20.2.2.2
      hold_multiplier: 30
      enabled: false
    state: replaced

# After state:
# -------------
# user@junos01# show protocols lldp
# disable;
# management-address 20.2.2.2;
# hold-multiplier 30;

# Using deleted
# Before state:
# -------------
# user@junos01# show protocols lldp
# management-address 20.2.2.2;
# hold-multiplier 30;

- name: Delete lldp configuration (this will by default remove all lldp configuration)
  junipernetworks.junos.junos_lldp_global:
    state: deleted

# After state:
# -------------
# user@junos01# # show protocols lldp
#
#
# Using gathered
# Before state:
# ------------
#
# ansible@cm123456tr21# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# transmit-delay 400;
# hold-multiplier 10;
# interface ge-0/0/1;
# interface ge-0/0/2 {
#     disable;
# }
- name: Gather junos lldp_global as in given arguments
  junipernetworks.junos.junos_lldp_global:
    state: gathered
# Task Output (redacted)
# -----------------------
#
# "gathered": {
#         "address": "10.1.1.1",
#         "hold_multiplier": 10,
#         "interval": 10000,
#         "transmit_delay": 400
#     }
# After state:
# ------------
#
# ansible@cm123456tr21# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# transmit-delay 400;
# hold-multiplier 10;
# interface ge-0/0/1;
# interface ge-0/0/2 {
#     disable;
# }
# Using rendered
- name: Render platform specific xml from task input using rendered state
  junipernetworks.junos.junos_lldp_global:
    config:
      interval: 10000
      address: 10.1.1.1
      transmit_delay: 400
      hold_multiplier: 10
    state: rendered
# Task Output (redacted)
# -----------------------
# "rendered": "<nc:protocols
#     xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
#     <nc:lldp>
#         <nc:management-address>10.1.1.1</nc:management-address>
#         <nc:advertisement-interval>10000</nc:advertisement-interval>
#         <nc:transmit-delay>400</nc:transmit-delay>
#         <nc:hold-multiplier>10</nc:hold-multiplier>
#         <nc:disable delete="delete"/>
#     </nc:lldp>
# </nc:protocols>"
#
# parsed.cfg
# ------------
#
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
#     <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
#         <protocols>
#             <ospf>
#                 <area>
#                     <name>0.0.0.0</name>
#                     <interface>
#                         <name>ge-0/0/0.0</name>
#                     </interface>
#                 </area>
#             </ospf>
#             <lldp>
#                 <management-address>10.1.1.1</management-address>
#                 <advertisement-interval>10000</advertisement-interval>
#                 <transmit-delay>400</transmit-delay>
#                 <hold-multiplier>10</hold-multiplier>
#                 <interface>
#                     <name>ge-0/0/1</name>
#                 </interface>
#                 <interface>
#                     <name>ge-0/0/2</name>
#                     <disable/>
#                 </interface>
#             </lldp>
#         </protocols>
#     </configuration>
# </rpc-reply>
# - name: Convert lldp global config to argspec without connecting to the appliance
#   junipernetworks.junos.junos_lldp_global:
#     running_config: "{{ lookup('file', './parsed.cfg') }}"
#     state: parsed
# Task Output (redacted)
# -----------------------
# "parsed": {
#         "address": "10.1.1.1",
#         "hold_multiplier": 10,
#         "interval": 10000,
#         "transmit_delay": 400
#     }

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
after
dictionary
when changed
The configuration as structured data after module completion.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
dictionary
always
The configuration as structured data prior to module invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list / elements=string
always
The set of commands pushed to the remote device.

Sample:
['<nc:protocols xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"> <nc:lldp> <nc:management-address>10.1.1.1</nc:management-address> <nc:advertisement-interval>10000</nc:advertisement-interval> <nc:transmit-delay>400</nc:transmit-delay> <nc:hold-multiplier>10</nc:hold-multiplier> <nc:disable delete="delete"/> </nc:lldp> </nc:protocols>', 'xml 2', 'xml 3']


Authors

  • Ganesh Nalawade (@ganeshrn)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/junipernetworks/junos/junos_lldp_global_module.html