netapp.ontap.na_ontap_cluster – NetApp ONTAP cluster - create a cluster and add/remove nodes.

Note

This plugin is part of the netapp.ontap collection (version 21.12.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install netapp.ontap.

To use it in a playbook, specify: netapp.ontap.na_ontap_cluster.

New in version 2.6.0: of netapp.ontap

Synopsis

  • Create ONTAP cluster.
  • Add or remove cluster nodes using cluster_ip_address.
  • Adding a node requires ONTAP 9.3 or better.
  • Removing a node requires ONTAP 9.4 or better.

Requirements

The below requirements are needed on the host that executes this module.

  • Ansible 2.9
  • Python3 netapp-lib (2018.11.13) or later. Install using ‘pip install netapp-lib’
  • netapp-lib 2020.3.12 is strongly recommended as it provides better error reporting for connection issues.
  • A physical or virtual clustered Data ONTAP system. The modules support Data ONTAP 9.1 and onward.
  • REST support requires ONTAP 9.6 or later.
  • To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’

Parameters

Parameter Choices/Defaults Comments
cert_filepath
string
added in 20.6.0 of netapp.ontap
path to SSL client cert file (.pem).
not supported with python 2.6.
cluster_contact
string
added in 19.11.0 of netapp.ontap
Cluster contact, only relevant if performing a modify action.
cluster_ip_address
string
intra cluster IP address of the node to be added or removed.
cluster_location
string
added in 19.11.0 of netapp.ontap
Cluster location, only relevant if performing a modify action.
cluster_name
string
The name of the cluster to manage.
feature_flags
dictionary
added in 20.5.0 of netapp.ontap
Enable or disable a new feature.
This can be used to enable an experimental feature or disable a new feature that breaks backward compatibility.
Supported keys and values are subject to change without notice. Unknown keys are ignored.
hostname
string / required
The hostname or IP address of the ONTAP instance.
http_port
integer
Override the default port (80 or 443) with this port
https
boolean
    Choices:
  • no
  • yes
Enable and disable https.
Ignored when using REST as only https is supported.
Ignored when using SSL certificate authentication as it requires SSL.
key_filepath
string
added in 20.6.0 of netapp.ontap
path to SSL client key file.
node_name
string
added in 20.9.0 of netapp.ontap
Name of the node to be added or removed from the cluster.
Be aware that when adding a node, '-' are converted to '_' by the ONTAP backend.
When creating a cluster, node_name is ignored.
When adding a node using cluster_ip_address, node_name is optional.
When used to remove a node, cluster_ip_address and node_name are mutually exclusive.
ontapi
integer
The ontap api version to use
password
string
Password for the specified user.

aliases: pass
single_node_cluster
boolean
added in 19.11.0 of netapp.ontap
    Choices:
  • no
  • yes
Whether the cluster is a single node cluster. Ignored for 9.3 or older versions.
If present, it was observed that 'Cluster' interfaces were deleted, whatever the value.
state
string
    Choices:
  • present
  • absent
Whether the specified cluster should exist (deleting a cluster is not supported).
Whether the node identified by its cluster_ip_address should be in the cluster or not.
time_out
integer
added in 21.1.0 of netapp.ontap
Default:
180
time to wait for cluster creation in seconds.
Error out if task is not completed in defined time.
if 0, the request is asynchronous.
default is set to 3 minutes.
use_rest
string
Default:
"auto"
REST API if supported by the target system for all the resources and attributes the module requires. Otherwise will revert to ZAPI.
always -- will always use the REST API
never -- will always use the ZAPI
auto -- will try to use the REST Api
username
string
This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required.
For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/.
Two authentication methods are supported
1. basic authentication, using username and password,
2. SSL certificate authentication, using a ssl client cert file, and optionally a private key file.
To use a certificate, the certificate must have been installed in the ONTAP cluster, and cert authentication must have been enabled.

aliases: user
validate_certs
boolean
    Choices:
  • no
  • yes
If set to no, the SSL certificates will not be validated.
This should only set to False used on personally controlled sites using self-signed certificates.

Notes

Note

  • supports REST and ZAPI
  • The modules prefixed with na_ontap are built to support the ONTAP storage platform.

Examples

- name: Create cluster
  netapp.ontap.na_ontap_cluster:
    state: present
    cluster_name: new_cluster
    time_out: 0
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
- name: Add node to cluster (Join cluster)
  netapp.ontap.na_ontap_cluster:
    state: present
    cluster_ip_address: 10.10.10.10
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
- name: Add node to cluster (Join cluster)
  netapp.ontap.na_ontap_cluster:
    state: present
    cluster_ip_address: 10.10.10.10
    node_name: my_preferred_node_name
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
- name: Create a 2 node cluster in one call
  netapp.ontap.na_ontap_cluster:
    state: present
    cluster_name: new_cluster
    cluster_ip_address: 10.10.10.10
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
- name: Remove node from cluster
  netapp.ontap.na_ontap_cluster:
    state: absent
    cluster_ip_address: 10.10.10.10
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
- name: Remove node from cluster
  netapp.ontap.na_ontap_cluster:
    state: absent
    node_name: node002
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
- name: modify cluster
  netapp.ontap.na_ontap_cluster:
    state: present
    cluster_contact: testing
    cluster_location: testing
    cluster_name: "{{ netapp_cluster}}"
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"

Authors

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/netapp/ontap/na_ontap_cluster_module.html