cisco.nxos.nxos_l3_interfaces – L3 interfaces resource module

Note

This plugin is part of the cisco.nxos collection (version 2.7.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_l3_interfaces.

New in version 1.0.0: of cisco.nxos

Synopsis

  • This module manages Layer-3 interfaces attributes of NX-OS Interfaces.

Note

This module has a corresponding action plugin.

Parameters

Parameter Choices/Defaults Comments
config
list / elements=dictionary
A dictionary of Layer-3 interface options
dot1q
integer
Configures IEEE 802.1Q VLAN encapsulation on a subinterface.
evpn_multisite_tracking
string
added in 1.1.0 of cisco.nxos
    Choices:
  • fabric-tracking
  • dci-tracking
VxLAN evpn multisite Interface tracking. Supported only on selected model.
ipv4
list / elements=dictionary
IPv4 address and attributes of the L3 interface.
address
string
IPV4 address of the L3 interface.
secondary
boolean
    Choices:
  • no
  • yes
A boolean attribute to manage addition of secondary IP address.
tag
integer
URIB route tag value for local/direct routes.
ipv6
list / elements=dictionary
IPv6 address and attributes of the L3 interface.
address
string
IPV6 address of the L3 interface.
tag
integer
URIB route tag value for local/direct routes.
name
string / required
Full name of L3 interface, i.e. Ethernet1/1.
redirects
boolean
    Choices:
  • no
  • yes
Enables/disables ip redirects
unreachables
boolean
    Choices:
  • no
  • yes
Enables/disables ip redirects
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the NX-OS device by executing the command show running-config | section '^interface'.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • merged
  • replaced
  • overridden
  • deleted
  • gathered
  • rendered
  • parsed
The state of the configuration after module completion.
The state overridden would override the IP address configuration of all interfaces on the device with the provided configuration in the task. Use caution with this state as you may loose access to the device.

Notes

Note

  • Tested against NXOS 7.3.(0)D1(1) on VIRL
  • Unsupported for Cisco MDS

Examples

# Using merged

# Before state:
# -------------
#
# interface Ethernet1/6

- name: Merge provided configuration with device configuration.
  cisco.nxos.nxos_l3_interfaces:
    config:
    - name: Ethernet1/6
      ipv4:
      - address: 192.168.1.1/24
        tag: 5
      - address: 10.1.1.1/24
        secondary: true
        tag: 10
      ipv6:
      - address: fd5d:12c9:2201:2::1/64
        tag: 6
    - name: Ethernet1/7.42
      dot1q: 42
      redirects: false
      unreachables: false
    state: merged

# After state:
# ------------
#
# interface Ethernet1/6
#   ip address 192.168.22.1/24 tag 5
#   ip address 10.1.1.1/24 secondary tag 10
# interface Ethernet1/6
#   ipv6 address fd5d:12c9:2201:2::1/64 tag 6
# interface Ethernet1/7.42
#   encapsulation dot1q 42
#   no ip redirects
#   no ip unreachables


# Using replaced

# Before state:
# -------------
#
# interface Ethernet1/6
#   ip address 192.168.22.1/24
#   ipv6 address "fd5d:12c9:2201:1::1/64"

- name: Replace device configuration of specified L3 interfaces with provided configuration.
  cisco.nxos.nxos_l3_interfaces:
    config:
    - name: Ethernet1/6
      ipv4:
        - address: 192.168.22.3/24
    state: replaced

# After state:
# ------------
#
# interface Ethernet1/6
#   ip address 192.168.22.3/24


# Using overridden

# Before state:
# -------------
#
# interface Ethernet1/2
#   ip address 192.168.22.1/24
# interface Ethernet1/6
#   ipv6 address "fd5d:12c9:2201:1::1/64"

- name: Override device configuration of all L3 interfaces on device with provided
    configuration.
  cisco.nxos.nxos_l3_interfaces:
    config:
    - name: Ethernet1/2
      ipv4: 192.168.22.3/4
    state: overridden

# After state:
# ------------
#
# interface Ethernet1/2
#   ipv4 address 192.168.22.3/24
# interface Ethernet1/6


# Using deleted

# Before state:
# -------------
#
# interface Ethernet1/6
#   ip address 192.168.22.1/24
# interface Ethernet1/2
#   ipv6 address "fd5d:12c9:2201:1::1/64"

- name: Delete L3 attributes of given interfaces (This won't delete the interface
    itself).
  cisco.nxos.nxos_l3_interfaces:
    config:
    - name: Ethernet1/6
    - name: Ethernet1/2
    state: deleted

# After state:
# ------------
#
# interface Ethernet1/6
# interface Ethernet1/2

# Using rendered

- name: Use rendered state to convert task input to device specific commands
  cisco.nxos.nxos_l3_interfaces:
    config:
    - name: Ethernet1/800
      ipv4:
      - address: 192.168.1.100/24
        tag: 5
      - address: 10.1.1.1/24
        secondary: true
        tag: 10
    - name: Ethernet1/800
      ipv6:
      - address: fd5d:12c9:2201:2::1/64
        tag: 6
    state: rendered

# Task Output (redacted)
# -----------------------

# rendered:
#   - "interface Ethernet1/800"
#   - "ip address 192.168.1.100/24 tag 5"
#   - "ip address 10.1.1.1/24 secondary tag 10"
#   - "interface Ethernet1/800"
#   - "ipv6 address fd5d:12c9:2201:2::1/64 tag 6"

# Using parsed

# parsed.cfg
# ------------
# interface Ethernet1/800
#   ip address 192.168.1.100/24 tag 5
#   ip address 10.1.1.1/24 secondary tag 10
#   no ip redirects
# interface Ethernet1/801
#   ipv6 address fd5d:12c9:2201:2::1/64 tag 6
#   ip unreachables
# interface mgmt0
#   ip address dhcp
#   vrf member management

- name: Use parsed state to convert externally supplied config to structured format
  cisco.nxos.nxos_l3_interfaces:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Task output (redacted)
# -----------------------

# parsed:
#   - name: Ethernet1/800
#     ipv4:
#       - address: 192.168.1.100/24
#         tag: 5
#       - address: 10.1.1.1/24
#         secondary: True
#         tag: 10
#     redirects: False
#   - name: Ethernet1/801
#     ipv6:
#      - address: fd5d:12c9:2201:2::1/64
#        tag: 6
#     unreachables: True

# Using gathered

# Existing device config state
# -------------------------------
# interface Ethernet1/1
#   ip address 192.0.2.100/24
# interface Ethernet1/2
#   no ip redirects
#   ip address 203.0.113.10/24
#   ip unreachables
#   ipv6 address 2001:db8::1/32

- name: Gather l3_interfaces facts from the device using nxos_l3_interfaces
  cisco.nxos.nxos_l3_interfaces:
    state: gathered

# Task output (redacted)
# -----------------------

# gathered:
#   - name: Ethernet1/1
#     ipv4:
#       - address: 192.0.2.100/24
#   - name: Ethernet1/2
#     ipv4:
#       - address: 203.0.113.10/24
#     ipv6:
#       - address: 2001:db8::1/32
#     redirects: False
#     unreachables: True

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
after
list / elements=string
when changed
The configuration as structured data after module completion.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
list / elements=string
always
The configuration as structured data prior to module invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list / elements=string
always
The set of commands pushed to the remote device.

Sample:
['interface Ethernet1/2', 'ip address 192.168.0.1/2']


Authors

  • Trishna Guha (@trishnaguha)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/cisco/nxos/nxos_l3_interfaces_module.html