cisco.iosxr.iosxr_ntp_global – Manages ntp resource module

Note

This plugin is part of the cisco.iosxr collection (version 2.5.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.iosxr.

To use it in a playbook, specify: cisco.iosxr.iosxr_ntp_global.

New in version 2.5.0: of cisco.iosxr

Synopsis

  • This module configures and manages the attributes of ntp on Cisco IOSXR platforms.

Note

This module has a corresponding action plugin.

Parameters

Parameter Choices/Defaults Comments
config
dictionary
A dictionary of ntp options
access_group
dictionary
Control NTP access
ipv4
dictionary
Configure IPv4 access
peer
string
Provide full access
query_only
string
Allow only control queries.
serve
string
Provide server and query access.
serve_only
string
Provide only server access.
ipv6
dictionary
Configure IPv6 access
peer
string
Provide full access
query_only
string
Allow only control queries.
serve
string
Provide server and query access.
serve_only
string
Provide only server access.
vrfs
list / elements=dictionary
Specify non-default VRF.
ipv4
dictionary
Configure IPv4 access
peer
string
Provide full access
query_only
string
Allow only control queries.
serve
string
Provide server and query access.
serve_only
string
Provide only server access.
ipv6
dictionary
Configure IPv6 access
peer
string
Provide full access
query_only
string
Allow only control queries.
serve
string
Provide server and query access.
serve_only
string
Provide only server access.
name
string
Specify non-default VRF.
authenticate
boolean
    Choices:
  • no
  • yes
Authenticate time sources
authentication_keys
list / elements=dictionary
Authentication key for trusted time sources
encryption
boolean
    Choices:
  • no
  • yes
Type of key encrypted or clear-text.
id
integer
<1-65535> Key number
key
string
Authentication key.
broadcastdelay
integer
Estimated round-trip delay in microseconds.
drift
dictionary
Drift(cisco-support)
aging_time
integer
Aging time in hours.
file
string
File for drift values.
interfaces
list / elements=dictionary
Configure NTP on an interface.
broadcast_client
boolean
    Choices:
  • no
  • yes
Listen to NTP broadcasts
broadcast_destination
string
Configure broadcast destination address.
broadcast_key
integer
Broadcast key number.
broadcast_version
integer
<2-4> NTP version number.
multicast_client
string
Configure multicast client
multicast_destination
string
Configure multicast destination
multicast_key
integer
Configure multicast authentication key.
multicast_ttl
integer
Configure TTL to use.
multicast_version
integer
<2-4> NTP version number.
name
string
Name of the interface.
vrf
string
Name of the vrf.
ipv4
dictionary
Mark the dscp/precedence bit for ipv4 packets.
dscp
string
Set IP DSCP (DiffServ CodePoint).Please refer vendor document for valid entries.
precedence
string
    Choices:
  • critical
  • flash
  • flash-override
  • immediate
  • internet
  • network
  • priority
  • routine
Set precedence Please refer vendor document for valid entries.
ipv6
dictionary
Mark the dscp/precedence bit for ipv4 packets.
dscp
string
Set IP DSCP (DiffServ CodePoint).Please refer vendor document for valid entries.
precedence
string
    Choices:
  • critical
  • flash
  • flash-override
  • immediate
  • internet
  • network
  • priority
  • routine
Set precedence Please refer vendor document for valid entries.
log_internal_sync
boolean
    Choices:
  • no
  • yes
Logs internal synchronization changes.
master
dictionary
Act as NTP master clock
stratum
integer
Use NTP as clock source with stratum number <1-15>
max_associations
integer
<0-4294967295> Number of associations.
passive
boolean
    Choices:
  • no
  • yes
Enable the passive associations.
peers
list / elements=dictionary
Configure NTP peer.
burst
boolean
    Choices:
  • no
  • yes
Use burst mode.
iburst
boolean
    Choices:
  • no
  • yes
Use initial burst mode.
key_id
integer
SConfigure peer authentication key
maxpoll
integer
configure Maximum poll interval.
minpoll
integer
configure Minimum poll interval.
peer
string / required
Hostname or A.B.C.D or A:B:C:D:E:F:G:H.
prefer
boolean
    Choices:
  • no
  • yes
Prefer this peer when possible
source
string
Interface for source address.
version
integer
NTP version.
vrf
string
vrf name.
servers
list / elements=dictionary
Configure NTP server.
burst
boolean
    Choices:
  • no
  • yes
Use burst mode.
iburst
boolean
    Choices:
  • no
  • yes
Use initial burst mode.
key_id
integer
SConfigure peer authentication key
maxpoll
integer
configure Maximum poll interval.
minpoll
integer
configure Minimum poll interval.
prefer
boolean
    Choices:
  • no
  • yes
Prefer this peer when possible
server
string / required
Hostname or A.B.C.D or A:B:C:D:E:F:G:H.
source
string
Interface for source address.
version
integer
NTP version.
vrf
string
vrf name.
source_interface
string
Configure default interface.
source_vrfs
list / elements=dictionary
Configure default interface.
name
string
Name of source interface.
vrf
string
vrf name.
trusted_keys
list / elements=dictionary
list of Key numbers for trusted time sources.
key_id
integer
Key numbers for trusted time sources.
update_calendar
boolean
    Choices:
  • no
  • yes
Periodically update calendar with NTP time.
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the IOSXR device by executing the command show running-config ntp.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • deleted
  • merged
  • overridden
  • replaced
  • gathered
  • rendered
  • parsed
The state the configuration should be left in.

Notes

Note

  • Tested against IOSXR 7.0.2.
  • This module works with connection network_cli.

Examples

# Using state: merged
# Before state:
# -------------
# RP/0/0/CPU0:10#show running-config ntp
# --------------------- EMPTY -----------------
# Merged play:
# ------------
- name: Merge the provided configuration with the existing running configuration
  cisco.iosxr.iosxr_ntp_global:
      config:
          access_group:
            ipv4:
              peer: PeerAcl1
              query_only: QueryOnlyAcl1
              serve: ServeAcl1
              serve_only: ServeOnlyAcl1
            vrfs:
              - ipv4:
                  peer: PeerAcl3
                  serve: ServeAcl2
                name: siteA
          authenticate: true
          broadcastdelay: 1
          drift:
            aging_time: 0
            file: apphost
          interfaces:
            - name: GigabitEthernet0/0/0/0
              multicast_client: 224.0.0.8
              multicast_destination: 224.0.0.8
              broadcast_client: true
          ipv4:
            dscp: af11
          ipv6:
            precedence: routine
          log_internal_sync: true
          master: 1
          max_associations: 10
          passive: true
          peers:
            - iburst: true
              peer: 192.0.2.1
              vrf: siteC
          servers:
            - burst: true
              server: 192.0.2.2
              vrf: siteD
          source: GigabitEthernet0/0/0/0
          source_vrfs:
            - name: GigabitEthernet0/0/0/0
              vrf: siteE
          trusted_keys:
            - key_id: 1
          update_calendar: true
# Commands Fired:
# ------------
# "commands": [
#         "ntp peer vrf siteC 192.0.2.1 iburst ",
#         "ntp server vrf siteD 192.0.2.2 burst ",
#         "ntp trusted-key 1",
#         "ntp interface GigabitEthernet0/0/0/0 broadcast client",
#         "ntp interface GigabitEthernet0/0/0/0 multicast destination 224.0.0.8",
#         "ntp interface GigabitEthernet0/0/0/0 multicast client 224.0.0.8",
#         "ntp vrf siteE source GigabitEthernet0/0/0/0",
#         "ntp access-group vrf siteA ipv4 serve ServeAcl2",
#         "ntp access-group vrf siteA ipv4 peer PeerAcl3",
#         "ntp access-group ipv4 peer PeerAcl1",
#         "ntp access-group ipv4 serve ServeAcl1",
#         "ntp access-group ipv4 serve-only ServeOnlyAcl1",
#         "ntp access-group ipv4 query-only QueryOnlyAcl1",
#         "ntp authenticate",
#         "ntp log-internal-sync",
#         "ntp broadcastdelay 1",
#         "ntp drift aging time 0",
#         "ntp drift file apphost",
#         "ntp ipv4 dscp af11",
#         "ntp ipv6 precedence routine",
#         "ntp max-associations 10",
#         "ntp master 1",
#         "ntp passive",
#         "ntp update-calendar",
#         "ntp source GigabitEthernet0/0/0/0"
#     ],
# After state:
# ------------
# RP/0/0/CPU0:10#show running-config ntp
# ntp
#  max-associations 10
#  interface GigabitEthernet0/0/0/0
#   broadcast client
#   multicast client 224.0.0.8
#   multicast destination 224.0.0.8
#  !
#  authenticate
#  trusted-key 1
#  ipv4 dscp af11
#  ipv6 precedence routine
#  peer vrf siteC 192.0.2.1 iburst
#  server vrf siteD 192.0.2.2 burst
#  drift file apphost
#  drift aging time 0
#  master 1
#  access-group vrf siteA ipv4 peer PeerAcl3
#  access-group vrf siteA ipv4 serve ServeAcl2
#  access-group ipv4 peer PeerAcl1
#  access-group ipv4 serve ServeAcl1
#  access-group ipv4 serve-only ServeOnlyAcl1
#  access-group ipv4 query-only QueryOnlyAcl1
#  source vrf siteE GigabitEthernet0/0/0/0
#  source GigabitEthernet0/0/0/0
#  passive
#  broadcastdelay 1
#  update-calendar
#  log-internal-sync
# !
# Using state: deleted
# Before state:
# -------------
# RP/0/0/CPU0:10#show running-config ntp
# ntp
#  max-associations 10
#  interface GigabitEthernet0/0/0/0
#   broadcast client
#   multicast client 224.0.0.8
#   multicast destination 224.0.0.8
#  !
#  authenticate
#  trusted-key 1
#  ipv4 dscp af11
#  ipv6 precedence routine
#  peer vrf siteC 192.0.2.1 iburst
#  server vrf siteD 192.0.2.2 burst
#  drift file apphost
#  drift aging time 0
#  master 1
#  access-group vrf siteA ipv4 peer PeerAcl3
#  access-group vrf siteA ipv4 serve ServeAcl2
#  access-group ipv4 peer PeerAcl1
#  access-group ipv4 serve ServeAcl1
#  access-group ipv4 serve-only ServeOnlyAcl1
#  access-group ipv4 query-only QueryOnlyAcl1
#  source vrf siteE GigabitEthernet0/0/0/0
#  source GigabitEthernet0/0/0/0
#  passive
#  broadcastdelay 1
#  update-calendar
#  log-internal-sync
# !
# Deleted play:
# -------------
- name: Remove all existing configuration
  cisco.iosxr.iosxr_ntp_global:
    state: deleted
# Commands Fired:
# ---------------
# "commands": [
#         "no ntp peer vrf siteC 192.0.2.1 iburst ",
#         "no ntp server vrf siteD 192.0.2.2 burst ",
#         "no ntp trusted-key 1",
#         "no ntp interface GigabitEthernet0/0/0/0",
#         "no ntp vrf siteE source GigabitEthernet0/0/0/0",
#         "no ntp access-group vrf siteA ipv4 serve ServeAcl2",
#         "no ntp access-group vrf siteA ipv4 peer PeerAcl3",
#         "no ntp access-group ipv4 peer PeerAcl1",
#         "no ntp access-group ipv4 serve ServeAcl1",
#         "no ntp access-group ipv4 serve-only ServeOnlyAcl1",
#         "no ntp access-group ipv4 query-only QueryOnlyAcl1",
#         "no ntp authenticate",
#         "no ntp log-internal-sync",
#         "no ntp broadcastdelay 1",
#         "no ntp drift aging time 0",
#         "no ntp drift file apphost",
#         "no ntp ipv4 dscp af11",
#         "no ntp ipv6 precedence routine",
#         "no ntp max-associations 10",
#         "no ntp master 1",
#         "no ntp passive",
#         "no ntp update-calendar",
#         "no ntp source GigabitEthernet0/0/0/0"
#     ],
# After state:
# ------------
# RP/0/0/CPU0:10#show running-config ntp
# --------------------- EMPTY -----------------
# Using state: overridden
# Before state:
# -------------
# RP/0/0/CPU0:10#show running-config ntp
# ntp
#  max-associations 10
#  interface GigabitEthernet0/0/0/0
#   broadcast client
#   multicast client 224.0.0.8
#   multicast destination 224.0.0.8
#  !
#  authenticate
#  trusted-key 1
#  ipv4 dscp af11
#  ipv6 precedence routine
#  peer vrf siteC 192.0.2.1 iburst
#  server vrf siteD 192.0.2.2 burst
#  drift file apphost
#  drift aging time 0
#  master 1
#  access-group vrf siteA ipv4 peer PeerAcl3
#  access-group vrf siteA ipv4 serve ServeAcl2
#  access-group ipv4 peer PeerAcl1
#  access-group ipv4 serve ServeAcl1
#  access-group ipv4 serve-only ServeOnlyAcl1
#  access-group ipv4 query-only QueryOnlyAcl1
#  source vrf siteE GigabitEthernet0/0/0/0
#  source GigabitEthernet0/0/0/0
#  passive
#  broadcastdelay 1
#  update-calendar
#  log-internal-sync
# !
# Overridden play:
# ----------------
- name: Override BGP configuration with provided configuration
  cisco.iosxr.iosxr_ntp_global:
        state: overridden
        config:
          access_group:
            ipv4:
              peer: PeerAcl1
              query_only: QueryOnlyAcl1
              serve: ServeAcl4
              serve_only: ServeOnlyAcl1
            vrfs:
              - ipv4:
                  peer: PeerAcl3
                  serve: ServeAcl2
                name: siteA
          authenticate: true
          broadcastdelay: 1
          drift:
            aging_time: 0
            file: apphost
          interfaces:
            - name: GigabitEthernet0/0/0/1
              multicast_client: 224.0.0.8
              multicast_destination: 224.0.0.8
              broadcast_client: true
          ipv4:
            dscp: af12
          ipv6:
            precedence: routine
          log_internal_sync: true
          master: 1
          max_associations: 10
          passive: true
          peers:
            - iburst: true
              peer: 192.0.2.3
              vrf: siteC
          servers:
            - burst: true
              server: 192.0.2.2
              vrf: siteD
          source: GigabitEthernet0/0/0/1
          source_vrfs:
            - name: GigabitEthernet0/0/0/0
              vrf: siteE
          trusted_keys:
            - key_id: 1
          update_calendar: true
# Commands Fired:
# ---------------
# "commands": [
#         "no ntp peer vrf siteC 192.0.2.1 iburst ",
#         "no ntp interface GigabitEthernet0/0/0/0",
#         "ntp peer vrf siteC 192.0.2.3 iburst ",
#         "ntp interface GigabitEthernet0/0/0/1 broadcast client",
#         "ntp interface GigabitEthernet0/0/0/1 multicast destination 224.0.0.8",
#         "ntp interface GigabitEthernet0/0/0/1 multicast client 224.0.0.8",
#         "ntp access-group ipv4 serve ServeAcl4",
#         "ntp ipv4 dscp af12",
#         "ntp source GigabitEthernet0/0/0/1"
#     ],
# After state:
# ------------
# RP/0/RP0/CPU0:ios#show running-config ntp
# Mon Sep 13 10:38:22.690 UTC
# ntp
#  max-associations 10
#  interface GigabitEthernet0/0/0/1
#   broadcast client
#   multicast client 224.0.0.8
#   multicast destination 224.0.0.8
#  !
#  authentication-key 1 md5 encrypted testkey
#  authenticate
#  trusted-key 1
#  ipv4 dscp af12
#  ipv6 precedence routine
#  peer vrf siteC 192.0.2.3 iburst
#  server vrf siteD 192.0.2.2 burst
#  drift file apphost
#  drift aging time 0
#  master 1
#  access-group vrf siteA ipv4 peer PeerAcl3
#  access-group vrf siteA ipv4 serve ServeAcl2
#  access-group ipv4 peer PeerAcl1
#  access-group ipv4 serve ServeAcl4
#  access-group ipv4 serve-only ServeOnlyAcl1
#  access-group ipv4 query-only QueryOnlyAcl1
#  source vrf siteE GigabitEthernet0/0/0/0
#  source GigabitEthernet0/0/0/1
#  passive
#  broadcastdelay 1
#  update-calendar
#  log-internal-sync
# !
#
# Using state: replaced
# Before state:
# -------------
# RP/0/0/CPU0:10#show running-config ntp
# ntp
#  max-associations 10
#  interface GigabitEthernet0/0/0/0
#   broadcast client
#   multicast client 224.0.0.8
#   multicast destination 224.0.0.8
#  !
#  authenticate
#  trusted-key 1
#  ipv4 dscp af11
#  ipv6 precedence routine
#  peer vrf siteC 192.0.2.1 iburst
#  server vrf siteD 192.0.2.2 burst
#  drift file apphost
#  drift aging time 0
#  master 1
#  access-group vrf siteA ipv4 peer PeerAcl3
#  access-group vrf siteA ipv4 serve ServeAcl2
#  access-group ipv4 peer PeerAcl1
#  access-group ipv4 serve ServeAcl1
#  access-group ipv4 serve-only ServeOnlyAcl1
#  access-group ipv4 query-only QueryOnlyAcl1
#  source vrf siteE GigabitEthernet0/0/0/0
#  source GigabitEthernet0/0/0/0
#  passive
#  broadcastdelay 1
#  update-calendar
#  log-internal-sync
# !
# Replaced play:
# ----------------
- name: Replaced BGP configuration with provided configuration
  cisco.iosxr.iosxr_ntp_global:
        state: replaced
        config:
          access_group:
            ipv4:
              peer: PeerAcl1
              query_only: QueryOnlyAcl1
              serve: ServeAcl4
              serve_only: ServeOnlyAcl1
            vrfs:
              - ipv4:
                  peer: PeerAcl3
                  serve: ServeAcl2
                name: siteA
          authenticate: true
          broadcastdelay: 1
          drift:
            aging_time: 0
            file: apphost
          interfaces:
            - name: GigabitEthernet0/0/0/1
              multicast_client: 224.0.0.8
              multicast_destination: 224.0.0.8
              broadcast_client: true
          ipv4:
            dscp: af12
          ipv6:
            precedence: routine
          log_internal_sync: true
          master: 1
          max_associations: 10
          passive: true
          peers:
            - iburst: true
              peer: 192.0.2.3
              vrf: siteC
          servers:
            - burst: true
              server: 192.0.2.2
              vrf: siteD
          source: GigabitEthernet0/0/0/1
          source_vrfs:
            - name: GigabitEthernet0/0/0/0
              vrf: siteE
          trusted_keys:
            - key_id: 1
          update_calendar: true
# Commands Fired:
# ---------------
# "commands": [
#         "no ntp peer vrf siteC 192.0.2.1 iburst ",
#         "no ntp interface GigabitEthernet0/0/0/0",
#         "ntp peer vrf siteC 192.0.2.3 iburst ",
#         "ntp interface GigabitEthernet0/0/0/1 broadcast client",
#         "ntp interface GigabitEthernet0/0/0/1 multicast destination 224.0.0.8",
#         "ntp interface GigabitEthernet0/0/0/1 multicast client 224.0.0.8",
#         "ntp access-group ipv4 serve ServeAcl4",
#         "ntp ipv4 dscp af12",
#         "ntp source GigabitEthernet0/0/0/1"
#     ],
# After state:
# ------------
# RP/0/RP0/CPU0:ios#show running-config ntp
# Mon Sep 13 10:38:22.690 UTC
# ntp
#  max-associations 10
#  interface GigabitEthernet0/0/0/1
#   broadcast client
#   multicast client 224.0.0.8
#   multicast destination 224.0.0.8
#  !
#  authentication-key 1 md5 encrypted testkey
#  authenticate
#  trusted-key 1
#  ipv4 dscp af12
#  ipv6 precedence routine
#  peer vrf siteC 192.0.2.3 iburst
#  server vrf siteD 192.0.2.2 burst
#  drift file apphost
#  drift aging time 0
#  master 1
#  access-group vrf siteA ipv4 peer PeerAcl3
#  access-group vrf siteA ipv4 serve ServeAcl2
#  access-group ipv4 peer PeerAcl1
#  access-group ipv4 serve ServeAcl4
#  access-group ipv4 serve-only ServeOnlyAcl1
#  access-group ipv4 query-only QueryOnlyAcl1
#  source vrf siteE GigabitEthernet0/0/0/0
#  source GigabitEthernet0/0/0/1
#  passive
#  broadcastdelay 1
#  update-calendar
#  log-internal-sync
# !
# Using state: gathered
# Before state:
# -------------
# RP/0/0/CPU0:10#show running-config ntp
# ntp
#  max-associations 10
#  interface GigabitEthernet0/0/0/0
#   broadcast client
#   multicast client 224.0.0.8
#   multicast destination 224.0.0.8
#  !
#  authenticate
#  trusted-key 1
#  ipv4 dscp af11
#  ipv6 precedence routine
#  peer vrf siteC 192.0.2.1 iburst
#  server vrf siteD 192.0.2.2 burst
#  drift file apphost
#  drift aging time 0
#  master 1
#  access-group vrf siteA ipv4 peer PeerAcl3
#  access-group vrf siteA ipv4 serve ServeAcl2
#  access-group ipv4 peer PeerAcl1
#  access-group ipv4 serve ServeAcl1
#  access-group ipv4 serve-only ServeOnlyAcl1
#  access-group ipv4 query-only QueryOnlyAcl1
#  source vrf siteE GigabitEthernet0/0/0/0
#  source GigabitEthernet0/0/0/0
#  passive
#  broadcastdelay 1
#  update-calendar
#  log-internal-sync
# !
# Gathered play:
# --------------
- name: Gather listed ntp config
  cisco.iosxr.iosxr_ntp_global:
    state: gathered
# Module Execution Result:
# ------------------------
# "gathered":{
#         "access_group": {
#             "ipv4": {
#                 "peer": "PeerAcl1",
#                 "query_only": "QueryOnlyAcl1",
#                 "serve": "ServeAcl1",
#                 "serve_only": "ServeOnlyAcl1"
#             },
#             "vrfs": [
#                 {
#                     "ipv4": {
#                         "peer": "PeerAcl3",
#                         "serve": "ServeAcl2"
#                     },
#                     "name": "siteA"
#                 }
#             ]
#         },
#         "authenticate": true,
#         "broadcastdelay": 1,
#         "drift": {
#             "aging_time": 0,
#             "file": "apphost"
#         },
#         "interfaces": [
#             {
#                 "broadcast_client": true,
#                 "multicast_client": "224.0.0.8",
#                 "multicast_destination": "224.0.0.8",
#                 "name": "GigabitEthernet0/0/0/0"
#             }
#         ],
#         "ipv4": {
#             "dscp": "af11"
#         },
#         "ipv6": {
#             "precedence": "routine"
#         },
#         "log_internal_sync": true,
#         "master": 1,
#         "max_associations": 10,
#         "passive": true,
#         "peers": [
#             {
#                 "iburst": true,
#                 "peer": "192.0.2.1",
#                 "vrf": "siteC"
#             }
#         ],
#         "servers": [
#             {
#                 "burst": true,
#                 "server": "192.0.2.2",
#                 "vrf": "siteD"
#             }
#         ],
#         "source": "GigabitEthernet0/0/0/0",
#         "source_vrfs": [
#             {
#                 "name": "GigabitEthernet0/0/0/0",
#                 "vrf": "siteE"
#             }
#         ],
#         "trusted_keys": [
#             {
#                 "key_id": 1
#             }
#         ],
#         "update_calendar": true
#     }
# Using state: rendered
# Rendered play:
# --------------
- name: Render platform specific configuration lines with state rendered (without connecting to the device)
  cisco.iosxr.iosxr_ntp_global:
    state: rendered
    config:
      access_group:
        ipv4:
          peer: PeerAcl1
          query_only: QueryOnlyAcl1
          serve: ServeAcl1
          serve_only: ServeOnlyAcl1
        vrfs:
          - ipv4:
              peer: PeerAcl3
              serve: ServeAcl2
            name: siteA
      authenticate: true
      broadcastdelay: 1
      drift:
        aging_time: 0
        file: apphost
      interfaces:
        - name: GigabitEthernet0/0/0/0
          multicast_client: 224.0.0.8
          multicast_destination: 224.0.0.8
          broadcast_client: true
      ipv4:
        dscp: af11
      ipv6:
        precedence: routine
      log_internal_sync: true
      master: 1
      max_associations: 10
      passive: true
      peers:
        - iburst: true
          peer: 192.0.2.1
          vrf: siteC
      servers:
        - burst: true
          server: 192.0.2.2
          vrf: siteD
      source: GigabitEthernet0/0/0/0
      source_vrfs:
        - name: GigabitEthernet0/0/0/0
          vrf: siteE
      trusted_keys:
        - key_id: 1
      update_calendar: true
  register: result
# Module Execution Result:
# ------------------------
# "rendered": [
#         "ntp peer vrf siteC 192.0.2.1 iburst ",
#         "ntp server vrf siteD 192.0.2.2 burst ",
#         "ntp trusted-key 1",
#         "ntp interface GigabitEthernet0/0/0/0 broadcast client",
#         "ntp interface GigabitEthernet0/0/0/0 multicast destination 224.0.0.8",
#         "ntp interface GigabitEthernet0/0/0/0 multicast client 224.0.0.8",
#         "ntp vrf siteE source GigabitEthernet0/0/0/0",
#         "ntp access-group vrf siteA ipv4 serve ServeAcl2",
#         "ntp access-group vrf siteA ipv4 peer PeerAcl3",
#         "ntp access-group ipv4 peer PeerAcl1",
#         "ntp access-group ipv4 serve ServeAcl1",
#         "ntp access-group ipv4 serve-only ServeOnlyAcl1",
#         "ntp access-group ipv4 query-only QueryOnlyAcl1",
#         "ntp authenticate",
#         "ntp log-internal-sync",
#         "ntp broadcastdelay 1",
#         "ntp drift aging time 0",
#         "ntp drift file apphost",
#         "ntp ipv4 dscp af11",
#         "ntp ipv6 precedence routine",
#         "ntp max-associations 10",
#         "ntp master 1",
#         "ntp passive",
#         "ntp update-calendar",
#         "ntp source GigabitEthernet0/0/0/0"
#     ],
# Using state: parsed
# File: parsed.cfg
# ----------------
# ntp
#  max-associations 10
#  interface GigabitEthernet0/0/0/0
#   broadcast client
#   multicast client 224.0.0.8
#   multicast destination 224.0.0.8
#  !
#  authenticate
#  trusted-key 1
#  ipv4 dscp af11
#  ipv6 precedence routine
#  peer vrf siteC 192.0.2.1 iburst
#  server vrf siteD 192.0.2.2 burst
#  drift file apphost
#  drift aging time 0
#  master 1
#  access-group vrf siteA ipv4 peer PeerAcl3
#  access-group vrf siteA ipv4 serve ServeAcl2
#  access-group ipv4 peer PeerAcl1
#  access-group ipv4 serve ServeAcl1
#  access-group ipv4 serve-only ServeOnlyAcl1
#  access-group ipv4 query-only QueryOnlyAcl1
#  source vrf siteE GigabitEthernet0/0/0/0
#  source GigabitEthernet0/0/0/0
#  passive
#  broadcastdelay 1
#  update-calendar
#  log-internal-sync
# !
# Parsed play:
# ------------
- name: Parse the provided configuration with the existing running configuration
  cisco.iosxr.iosxr_ntp_global:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed
# Module Execution Result:
# ------------------------
# "parsed":{
#         "access_group": {
#             "ipv4": {
#                 "peer": "PeerAcl1",
#                 "query_only": "QueryOnlyAcl1",
#                 "serve": "ServeAcl1",
#                 "serve_only": "ServeOnlyAcl1"
#             },
#             "vrfs": [
#                 {
#                     "ipv4": {
#                         "peer": "PeerAcl3",
#                         "serve": "ServeAcl2"
#                     },
#                     "name": "siteA"
#                 }
#             ]
#         },
#         "authenticate": true,
#         "broadcastdelay": 1,
#         "drift": {
#             "aging_time": 0,
#             "file": "apphost"
#         },
#         "interfaces": [
#             {
#                 "broadcast_client": true,
#                 "multicast_client": "224.0.0.8",
#                 "multicast_destination": "224.0.0.8",
#                 "name": "GigabitEthernet0/0/0/0"
#             }
#         ],
#         "ipv4": {
#             "dscp": "af11"
#         },
#         "ipv6": {
#             "precedence": "routine"
#         },
#         "log_internal_sync": true,
#         "master": 1,
#         "max_associations": 10,
#         "passive": true,
#         "peers": [
#             {
#                 "iburst": true,
#                 "peer": "192.0.2.1",
#                 "vrf": "siteC"
#             }
#         ],
#         "servers": [
#             {
#                 "burst": true,
#                 "server": "192.0.2.2",
#                 "vrf": "siteD"
#             }
#         ],
#         "source": "GigabitEthernet0/0/0/0",
#         "source_vrfs": [
#             {
#                 "name": "GigabitEthernet0/0/0/0",
#                 "vrf": "siteE"
#             }
#         ],
#         "trusted_keys": [
#             {
#                 "key_id": 1
#             }
#         ],
#         "update_calendar": true
#     }

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
after
dictionary
when changed
The resulting configuration after module execution.

Sample:
This output will always be in the same format as the module argspec.
before
dictionary
when state is merged, replaced, overridden, deleted or purged
The configuration prior to the module execution.

Sample:
This output will always be in the same format as the module argspec.
commands
list / elements=string
when state is merged, replaced, overridden, deleted or purged
The set of commands pushed to the remote device.

Sample:
['sample command 1', 'sample command 2', 'sample command 3']
gathered
list / elements=string
when state is gathered
Facts about the network resource gathered from the remote device as structured data.

Sample:
This output will always be in the same format as the module argspec.
parsed
list / elements=string
when state is parsed
The device native config provided in running_config option parsed into structured data as per module argspec.

Sample:
This output will always be in the same format as the module argspec.
rendered
list / elements=string
when state is rendered
The provided configuration in the task rendered in device-native format (offline).

Sample:
['sample command 1', 'sample command 2', 'sample command 3']


Authors

  • Ashwini Mhatre (@amhatre)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/cisco/iosxr/iosxr_ntp_global_module.html