netapp.ontap.na_ontap_qos_policy_group – NetApp ONTAP manage policy group in Quality of Service.

Note

This plugin is part of the netapp.ontap collection (version 21.12.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install netapp.ontap.

To use it in a playbook, specify: netapp.ontap.na_ontap_qos_policy_group.

New in version 2.8.0: of netapp.ontap

Synopsis

  • Create, destroy, modify, or rename QoS policy group on NetApp ONTAP.

Requirements

The below requirements are needed on the host that executes this module.

  • Ansible 2.9
  • Python3 netapp-lib (2018.11.13) or later. Install using ‘pip install netapp-lib’
  • netapp-lib 2020.3.12 is strongly recommended as it provides better error reporting for connection issues.
  • A physical or virtual clustered Data ONTAP system. The modules support Data ONTAP 9.1 and onward.
  • REST support requires ONTAP 9.6 or later.
  • To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’

Parameters

Parameter Choices/Defaults Comments
cert_filepath
string
added in 20.6.0 of netapp.ontap
path to SSL client cert file (.pem).
not supported with python 2.6.
feature_flags
dictionary
added in 20.5.0 of netapp.ontap
Enable or disable a new feature.
This can be used to enable an experimental feature or disable a new feature that breaks backward compatibility.
Supported keys and values are subject to change without notice. Unknown keys are ignored.
force
boolean
    Choices:
  • no ←
  • yes
Setting to 'true' forces the deletion of the workloads associated with the policy group along with the policy group.
from_name
string
Name of the existing policy group to be renamed to name.
hostname
string / required
The hostname or IP address of the ONTAP instance.
http_port
integer
Override the default port (80 or 443) with this port
https
boolean
    Choices:
  • no ←
  • yes
Enable and disable https.
Ignored when using REST as only https is supported.
Ignored when using SSL certificate authentication as it requires SSL.
is_shared
boolean
added in 20.12.0 of netapp.ontap
    Choices:
  • no
  • yes
Whether the SLOs of the policy group are shared between the workloads or if the SLOs are applied separately to each workload.
key_filepath
string
added in 20.6.0 of netapp.ontap
path to SSL client key file.
max_throughput
string
Maximum throughput defined by this policy.
min_throughput
string
Minimum throughput defined by this policy.
name
string / required
The name of the policy group to manage.
ontapi
integer
The ontap api version to use
password
string
Password for the specified user.

aliases: pass
state
string
    Choices:
  • present ←
  • absent
Whether the specified policy group should exist or not.
use_rest
string
Default:
"auto"
REST API if supported by the target system for all the resources and attributes the module requires. Otherwise will revert to ZAPI.
always -- will always use the REST API
never -- will always use the ZAPI
auto -- will try to use the REST Api
username
string
This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required.
For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/.
Two authentication methods are supported
1. basic authentication, using username and password,
2. SSL certificate authentication, using a ssl client cert file, and optionally a private key file.
To use a certificate, the certificate must have been installed in the ONTAP cluster, and cert authentication must have been enabled.

aliases: user
validate_certs
boolean
    Choices:
  • no
  • yes ←
If set to no, the SSL certificates will not be validated.
This should only set to False used on personally controlled sites using self-signed certificates.
vserver
string / required
Name of the vserver to use.

Notes

Note

  • The modules prefixed with na_ontap are built to support the ONTAP storage platform.

Examples

- name: create qos policy group
  na_ontap_qos_policy_group:
    state: present
    name: policy_1
    vserver: policy_vserver
    max_throughput: 800KB/s,800iops
    min_throughput: 100iops
    hostname: 10.193.78.30
    username: admin
    password: netapp1!

- name: modify qos policy group max throughput
  na_ontap_qos_policy_group:
    state: present
    name: policy_1
    vserver: policy_vserver
    max_throughput: 900KB/s,800iops
    min_throughput: 100iops
    hostname: 10.193.78.30
    username: admin
    password: netapp1!

- name: delete qos policy group
  na_ontap_qos_policy_group:
    state: absent
    name: policy_1
    vserver: policy_vserver
    hostname: 10.193.78.30
    username: admin
    password: netapp1!

Authors

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/netapp/ontap/na_ontap_qos_policy_group_module.html