fortinet.fortios.fortios_vpn_ipsec_phase2 – Configure VPN autokey tunnel in Fortinet’s FortiOS and FortiGate.

Note

This plugin is part of the fortinet.fortios collection (version 2.1.2).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios.

To use it in a playbook, specify: fortinet.fortios.fortios_vpn_ipsec_phase2.

New in version 2.10: of fortinet.fortios

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify vpn_ipsec feature and phase2 category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.9.0

Parameters

Parameter Choices/Defaults Comments
access_token
string
Token-based authentication. Generated from GUI of Fortigate.
enable_log
boolean
    Choices:
  • no
  • yes
Enable/Disable logging for task.
state
string / required
    Choices:
  • present
  • absent
Indicates whether to create or remove the object.
vdom
string
Default:
"root"
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.
vpn_ipsec_phase2
dictionary
Configure VPN autokey tunnel.
add_route
string
    Choices:
  • phase1
  • enable
  • disable
Enable/disable automatic route addition.
auto_negotiate
string
    Choices:
  • enable
  • disable
Enable/disable IPsec SA auto-negotiation.
comments
string
Comment.
dhcp_ipsec
string
    Choices:
  • enable
  • disable
Enable/disable DHCP-IPsec.
dhgrp
list / elements=string
    Choices:
  • 1
  • 2
  • 5
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
Phase2 DH group.
diffserv
string
    Choices:
  • enable
  • disable
Enable/disable applying DSCP value to the IPsec tunnel outer IP header.
diffservcode
string
DSCP value to be applied to the IPsec tunnel outer IP header.
dst_addr_type
string
    Choices:
  • subnet
  • range
  • ip
  • name
Remote proxy ID type.
dst_end_ip
string
Remote proxy ID IPv4 end.
dst_end_ip6
string
Remote proxy ID IPv6 end.
dst_name
string
Remote proxy ID name. Source firewall.address.name firewall.addrgrp.name.
dst_name6
string
Remote proxy ID name. Source firewall.address6.name firewall.addrgrp6.name.
dst_port
integer
Quick mode destination port (1 - 65535 or 0 for all).
dst_start_ip
string
Remote proxy ID IPv4 start.
dst_start_ip6
string
Remote proxy ID IPv6 start.
dst_subnet
string
Remote proxy ID IPv4 subnet.
dst_subnet6
string
Remote proxy ID IPv6 subnet.
encapsulation
string
    Choices:
  • tunnel-mode
  • transport-mode
ESP encapsulation mode.
initiator_ts_narrow
string
    Choices:
  • enable
  • disable
Enable/disable traffic selector narrowing for IKEv2 initiator.
ipv4_df
string
    Choices:
  • enable
  • disable
Enable/disable setting and resetting of IPv4 "Don"t Fragment" bit.
keepalive
string
    Choices:
  • enable
  • disable
Enable/disable keep alive.
keylife_type
string
    Choices:
  • seconds
  • kbs
  • both
Keylife type.
keylifekbs
integer
Phase2 key life in number of bytes of traffic (5120 - 4294967295).
keylifeseconds
integer
Phase2 key life in time in seconds (120 - 172800).
l2tp
string
    Choices:
  • enable
  • disable
Enable/disable L2TP over IPsec.
name
string / required
IPsec tunnel name.
pfs
string
    Choices:
  • enable
  • disable
Enable/disable PFS feature.
phase1name
string
Phase 1 determines the options required for phase 2. Source vpn.ipsec.phase1.name.
proposal
list / elements=string
    Choices:
  • null-md5
  • null-sha1
  • null-sha256
  • null-sha384
  • null-sha512
  • des-null
  • des-md5
  • des-sha1
  • des-sha256
  • des-sha384
  • des-sha512
  • 3des-null
  • 3des-md5
  • 3des-sha1
  • 3des-sha256
  • 3des-sha384
  • 3des-sha512
  • aes128-null
  • aes128-md5
  • aes128-sha1
  • aes128-sha256
  • aes128-sha384
  • aes128-sha512
  • aes128gcm
  • aes192-null
  • aes192-md5
  • aes192-sha1
  • aes192-sha256
  • aes192-sha384
  • aes192-sha512
  • aes256-null
  • aes256-md5
  • aes256-sha1
  • aes256-sha256
  • aes256-sha384
  • aes256-sha512
  • aes256gcm
  • chacha20poly1305
  • aria128-null
  • aria128-md5
  • aria128-sha1
  • aria128-sha256
  • aria128-sha384
  • aria128-sha512
  • aria192-null
  • aria192-md5
  • aria192-sha1
  • aria192-sha256
  • aria192-sha384
  • aria192-sha512
  • aria256-null
  • aria256-md5
  • aria256-sha1
  • aria256-sha256
  • aria256-sha384
  • aria256-sha512
  • seed-null
  • seed-md5
  • seed-sha1
  • seed-sha256
  • seed-sha384
  • seed-sha512
Phase2 proposal.
protocol
integer
Quick mode protocol selector (1 - 255 or 0 for all).
replay
string
    Choices:
  • enable
  • disable
Enable/disable replay detection.
route_overlap
string
    Choices:
  • use-old
  • use-new
  • allow
Action for overlapping routes.
selector_match
string
    Choices:
  • exact
  • subset
  • auto
Match type to use when comparing selectors.
single_source
string
    Choices:
  • enable
  • disable
Enable/disable single source IP restriction.
src_addr_type
string
    Choices:
  • subnet
  • range
  • ip
  • name
Local proxy ID type.
src_end_ip
string
Local proxy ID end.
src_end_ip6
string
Local proxy ID IPv6 end.
src_name
string
Local proxy ID name. Source firewall.address.name firewall.addrgrp.name.
src_name6
string
Local proxy ID name. Source firewall.address6.name firewall.addrgrp6.name.
src_port
integer
Quick mode source port (1 - 65535 or 0 for all).
src_start_ip
string
Local proxy ID start.
src_start_ip6
string
Local proxy ID IPv6 start.
src_subnet
string
Local proxy ID subnet.
src_subnet6
string
Local proxy ID IPv6 subnet.
use_natip
string
    Choices:
  • enable
  • disable
Enable to use the FortiGate public IP as the source selector when outbound NAT is used.

Notes

Note

  • Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure VPN autokey tunnel.
    fortios_vpn_ipsec_phase2:
      vdom:  "{{ vdom }}"
      state: "present"
      access_token: "<your_own_value>"
      vpn_ipsec_phase2:
        add_route: "phase1"
        auto_negotiate: "enable"
        comments: "<your_own_value>"
        dhcp_ipsec: "enable"
        dhgrp: "1"
        diffserv: "enable"
        diffservcode: "<your_own_value>"
        dst_addr_type: "subnet"
        dst_end_ip: "<your_own_value>"
        dst_end_ip6: "<your_own_value>"
        dst_name: "<your_own_value> (source firewall.address.name firewall.addrgrp.name)"
        dst_name6: "<your_own_value> (source firewall.address6.name firewall.addrgrp6.name)"
        dst_port: "15"
        dst_start_ip: "<your_own_value>"
        dst_start_ip6: "<your_own_value>"
        dst_subnet: "<your_own_value>"
        dst_subnet6: "<your_own_value>"
        encapsulation: "tunnel-mode"
        initiator_ts_narrow: "enable"
        ipv4_df: "enable"
        keepalive: "enable"
        keylife_type: "seconds"
        keylifekbs: "25"
        keylifeseconds: "26"
        l2tp: "enable"
        name: "default_name_28"
        pfs: "enable"
        phase1name: "<your_own_value> (source vpn.ipsec.phase1.name)"
        proposal: "null-md5"
        protocol: "32"
        replay: "enable"
        route_overlap: "use-old"
        selector_match: "exact"
        single_source: "enable"
        src_addr_type: "subnet"
        src_end_ip: "<your_own_value>"
        src_end_ip6: "<your_own_value>"
        src_name: "<your_own_value> (source firewall.address.name firewall.addrgrp.name)"
        src_name6: "<your_own_value> (source firewall.address6.name firewall.addrgrp6.name)"
        src_port: "42"
        src_start_ip: "<your_own_value>"
        src_start_ip6: "<your_own_value>"
        src_subnet: "<your_own_value>"
        src_subnet6: "<your_own_value>"
        use_natip: "enable"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
build
string
always
Build number of the fortigate image

Sample:
1547
http_method
string
always
Last method used to provision the content into FortiGate

Sample:
PUT
http_status
string
always
Last result given by FortiGate on last operation applied

Sample:
200
mkey
string
success
Master key (id) used in the last call to FortiGate

Sample:
id
name
string
always
Name of the table used to fulfill the request

Sample:
urlfilter
path
string
always
Path of the table used to fulfill the request

Sample:
webfilter
revision
string
always
Internal revision number

Sample:
17.0.2.10658
serial
string
always
Serial number of the unit

Sample:
FGVMEVYYQT3AB5352
status
string
always
Indication of the operation's result

Sample:
success
vdom
string
always
Virtual domain used

Sample:
root
version
string
always
Version of the FortiGate

Sample:
v5.6.3


Authors

  • Link Zheng (@chillancezen)
  • Jie Xue (@JieX19)
  • Hongbin Lu (@fgtdev-hblu)
  • Frank Shen (@frankshen01)
  • Miguel Angel Munoz (@mamunozgonzalez)
  • Nicolas Thomas (@thomnico)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/fortinet/fortios/fortios_vpn_ipsec_phase2_module.html