junipernetworks.junos.junos_logging – Manage logging on network devices

Note

This plugin is part of the junipernetworks.junos collection (version 2.6.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install junipernetworks.junos.

To use it in a playbook, specify: junipernetworks.junos.junos_logging.

New in version 1.0.0: of junipernetworks.junos

DEPRECATED

Removed in

major release after 2023-08-01

Why

Updated module released with more functionality.

Alternative

junos_logging_global

Synopsis

  • This module provides declarative management of logging on Juniper JUNOS devices.

Note

This module has a corresponding action plugin.

Requirements

The below requirements are needed on the host that executes this module.

  • ncclient (>=v0.5.2)

Parameters

Parameter Choices/Defaults Comments
active
boolean
    Choices:
  • no
  • yes
Specifies whether or not the configuration is active or deactivated
aggregate
list / elements=dictionary
List of logging definitions.
active
boolean
    Choices:
  • no
  • yes
Specifies whether or not the configuration is active or deactivated
dest
string
    Choices:
  • console
  • host
  • file
  • user
Destination of the logs.
facility
string
Set logging facility.
files
integer
Number of files to be archived, this is applicable if value of dest is file. The acceptable value is in range from 1 to 1000.
level
string
Set logging severity levels.
name
string
If value of dest is file it indicates file-name, for user it indicates username and for host indicates the host name to be notified.
rotate_frequency
integer
Rotate log frequency in minutes, this is applicable if value of dest is file. The acceptable value is in range of 1 to 59. This controls the frequency after which log file is rotated.
size
integer
Size of the file in archive, this is applicable if value of dest is file. The acceptable value is in range from 65536 to 1073741824 bytes.
state
string
    Choices:
  • present
  • absent
State of the logging configuration.
dest
string
    Choices:
  • console
  • host
  • file
  • user
Destination of the logs.
facility
string
Set logging facility.
files
integer
Number of files to be archived, this is applicable if value of dest is file. The acceptable value is in range from 1 to 1000.
level
string
Set logging severity levels.
name
string
If value of dest is file it indicates file-name, for user it indicates username and for host indicates the host name to be notified.
provider
dictionary
Deprecated
Starting with Ansible 2.5 we recommend using connection: network_cli or connection: netconf.
For more information please see the Junos OS Platform Options guide.
A dict object containing connection details.
host
string
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
password
string
Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
port
integer
Specifies the port to use when building the connection to the remote device. The port value will default to the well known SSH port of 22 (for transport=cli) or port 830 (for transport=netconf) device.
ssh_keyfile
path
Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
timeout
integer
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
transport
string
    Choices:
  • cli
  • netconf
Configures the transport connection to use when connecting to the remote device.
username
string
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
rotate_frequency
integer
Rotate log frequency in minutes, this is applicable if value of dest is file. The acceptable value is in range of 1 to 59. This controls the frequency after which log file is rotated.
size
integer
Size of the file in archive, this is applicable if value of dest is file. The acceptable value is in range from 65536 to 1073741824 bytes.
state
string
    Choices:
  • present
  • absent
State of the logging configuration.

Notes

Note

  • This module requires the netconf system service be enabled on the remote device being managed.
  • Tested against vSRX JUNOS version 15.1X49-D15.4, vqfx-10000 JUNOS Version 15.1X53-D60.4.
  • Recommended connection is netconf. See the Junos OS Platform Options.
  • This module also works with local connections for legacy playbooks.
  • For information on using CLI and netconf see the Junos OS Platform Options guide
  • For more information on using Ansible to manage network devices see the Ansible Network Guide
  • For more information on using Ansible to manage Juniper network devices see https://www.ansible.com/ansible-juniper.

Examples

- name: configure console logging
  junipernetworks.junos.junos_logging:
    dest: console
    facility: any
    level: critical

- name: remove console logging configuration
  junipernetworks.junos.junos_logging:
    dest: console
    state: absent

- name: configure file logging
  junipernetworks.junos.junos_logging:
    dest: file
    name: test
    facility: pfe
    level: error

- name: configure logging parameter
  junipernetworks.junos.junos_logging:
    files: 30
    size: 65536
    rotate_frequency: 10

- name: Configure file logging using aggregate
  junipernetworks.junos.junos_logging:
    dest: file
    aggregate:
    - name: test-1
      facility: pfe
      level: critical
    - name: test-2
      facility: kernel
      level: emergency
    active: true

- name: Delete file logging using aggregate
  junipernetworks.junos.junos_logging:
    aggregate:
    - {dest: file, name: test-1, facility: pfe, level: critical}
    - {dest: file, name: test-2, facility: kernel, level: emergency}
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
diff.prepared
string
when configuration is changed and diff option is enabled.
Configuration difference before and after applying change.

Sample:
[edit system syslog] + [edit system syslog] file interactive-commands { ... } + file test { + pfe critical; + }


Status

  • This module will be removed in a major release after 2023-08-01. [deprecated]
  • For more information see DEPRECATED.

Authors

  • Ganesh Nalawade (@ganeshrn)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/junipernetworks/junos/junos_logging_module.html