community.general.imc_rest – Manage Cisco IMC hardware through its REST API

Note

This plugin is part of the community.general collection (version 3.8.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.general.

To use it in a playbook, specify: community.general.imc_rest.

Synopsis

Requirements

The below requirements are needed on the host that executes this module.

  • lxml
  • xmljson >= 0.1.8

Parameters

Parameter Choices/Defaults Comments
content
string
When used instead of path, sets the content of the API requests directly.
This may be convenient to template simple requests, for anything complex use the ansible.builtin.template module.
You can collate multiple IMC XML fragments and they will be processed sequentially in a single stream, the Cisco IMC output is subsequently merged.
Parameter content is mutual exclusive with parameter path.
hostname
string / required
IP Address or hostname of Cisco IMC, resolvable by Ansible control host.

aliases: host, ip
password
string
Default:
"password"
The password to use for authentication.
path
path
Name of the absolute path of the filename that includes the body of the http request being sent to the Cisco IMC REST API.
Parameter path is mutual exclusive with parameter content.

aliases: src, config_file
protocol
string
    Choices:
  • http
  • https
Connection protocol to use.
timeout
integer
Default:
60
The socket level timeout in seconds.
This is the time that every single connection (every fragment) can spend. If this timeout is reached, the module will fail with a Connection failure indicating that The read operation timed out.
username
string
Default:
"admin"
Username used to login to the switch.

aliases: user
validate_certs
boolean
    Choices:
  • no
  • yes
If no, SSL certificates will not be validated.
This should only set to no used on personally controlled sites using self-signed certificates.

Notes

Note

  • The XML fragments don’t need an authentication cookie, this is injected by the module automatically.
  • The Cisco IMC XML output is being translated to JSON using the Cobra convention.
  • Any configConfMo change requested has a return status of ‘modified’, even if there was no actual change from the previous configuration. As a result, this module will always report a change on subsequent runs. In case this behaviour is fixed in a future update to Cisco IMC, this module will automatically adapt.
  • If you get a Connection failure related to The read operation timed out increase the timeout parameter. Some XML fragments can take longer than the default timeout.
  • More information about the IMC REST API is available from http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/api/3_0/b_Cisco_IMC_api_301.html

Examples

- name: Power down server
  community.general.imc_rest:
    hostname: '{{ imc_hostname }}'
    username: '{{ imc_username }}'
    password: '{{ imc_password }}'
    validate_certs: no
    content: |
      <configConfMo><inConfig>
        <computeRackUnit dn="sys/rack-unit-1" adminPower="down"/>
      </inConfig></configConfMo>
  delegate_to: localhost

- name: Configure IMC using multiple XML fragments
  community.general.imc_rest:
    hostname: '{{ imc_hostname }}'
    username: '{{ imc_username }}'
    password: '{{ imc_password }}'
    validate_certs: no
    timeout: 120
    content: |
      <!-- Configure Serial-on-LAN -->
      <configConfMo><inConfig>
        <solIf dn="sys/rack-unit-1/sol-if" adminState="enable" speed=="115200" comport="com0"/>
      </inConfig></configConfMo>

      <!-- Configure Console Redirection -->
      <configConfMo><inConfig>
        <biosVfConsoleRedirection dn="sys/rack-unit-1/bios/bios-settings/Console-redirection"
          vpBaudRate="115200"
          vpConsoleRedirection="com-0"
          vpFlowControl="none"
          vpTerminalType="vt100"
          vpPuttyKeyPad="LINUX"
          vpRedirectionAfterPOST="Always Enable"/>
      </inConfig></configConfMo>
  delegate_to: localhost

- name: Enable PXE boot and power-cycle server
  community.general.imc_rest:
    hostname: '{{ imc_hostname }}'
    username: '{{ imc_username }}'
    password: '{{ imc_password }}'
    validate_certs: no
    content: |
      <!-- Configure PXE boot -->
      <configConfMo><inConfig>
        <lsbootLan dn="sys/rack-unit-1/boot-policy/lan-read-only" access="read-only" order="1" prot="pxe" type="lan"/>
      </inConfig></configConfMo>

      <!-- Power cycle server -->
      <configConfMo><inConfig>
        <computeRackUnit dn="sys/rack-unit-1" adminPower="cycle-immediate"/>
      </inConfig></configConfMo>
  delegate_to: localhost

- name: Reconfigure IMC to boot from storage
  community.general.imc_rest:
    hostname: '{{ imc_host }}'
    username: '{{ imc_username }}'
    password: '{{ imc_password }}'
    validate_certs: no
    content: |
      <configConfMo><inConfig>
        <lsbootStorage dn="sys/rack-unit-1/boot-policy/storage-read-write" access="read-write" order="1" type="storage"/>
      </inConfig></configConfMo>
  delegate_to: localhost

- name: Add customer description to server
  community.general.imc_rest:
    hostname: '{{ imc_host }}'
    username: '{{ imc_username }}'
    password: '{{ imc_password }}'
    validate_certs: no
    content: |
        <configConfMo><inConfig>
          <computeRackUnit dn="sys/rack-unit-1" usrLbl="Customer Lab - POD{{ pod_id }} - {{ inventory_hostname_short }}"/>
        </inConfig></configConfMo>
    delegate_to: localhost

- name: Disable HTTP and increase session timeout to max value 10800 secs
  community.general.imc_rest:
    hostname: '{{ imc_host }}'
    username: '{{ imc_username }}'
    password: '{{ imc_password }}'
    validate_certs: no
    timeout: 120
    content: |
        <configConfMo><inConfig>
          <commHttp dn="sys/svc-ext/http-svc" adminState="disabled"/>
        </inConfig></configConfMo>

        <configConfMo><inConfig>
          <commHttps dn="sys/svc-ext/https-svc" adminState="enabled" sessionTimeout="10800"/>
        </inConfig></configConfMo>
    delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
aaLogin
dictionary
success
Cisco IMC XML output for the login, translated to JSON using Cobra convention

Sample:
"attributes": { "cookie": "", "outCookie": "1498902428/9de6dc36-417c-157c-106c-139efe2dc02a", "outPriv": "admin", "outRefreshPeriod": "600", "outSessionId": "114", "outVersion": "2.0(13e)", "response": "yes" }
configConfMo
dictionary
success
Cisco IMC XML output for any configConfMo XML fragments, translated to JSON using Cobra convention

elapsed
integer
always
Elapsed time in seconds

Sample:
31
error
dictionary
failed
Cisco IMC XML error output for last request, translated to JSON using Cobra convention

Sample:
"attributes": { "cookie": "", "errorCode": "ERR-xml-parse-error", "errorDescr": "XML PARSING ERROR: Element 'computeRackUnit', attribute 'admin_Power': The attribute 'admin_Power' is not allowed. ", "invocationResult": "594", "response": "yes" }
error_code
string
failed
Cisco IMC error code

Sample:
ERR-xml-parse-error
error_text
string
failed
Cisco IMC error message

Sample:
XML PARSING ERROR: Element 'computeRackUnit', attribute 'admin_Power': The attribute 'admin_Power' is not allowed.
input
string
failed
RAW XML input sent to the Cisco IMC, causing the error

Sample:
<configConfMo><inConfig><computeRackUnit dn="sys/rack-unit-1" admin_Power="down"/></inConfig></configConfMo>
output
string
failed
RAW XML output received from the Cisco IMC, with error details

Sample:
<error cookie="" response="yes" errorCode="ERR-xml-parse-error" invocationResult="594" errorDescr="XML PARSING ERROR: Element 'computeRackUnit', attribute 'admin_Power': The attribute 'admin_Power' is not allowed.\n"/>
response
string
always
HTTP response message, including content length

Sample:
OK (729 bytes)
status
dictionary
always
The HTTP response status code

Sample:
200


Authors

  • Dag Wieers (@dagwieers)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/community/general/imc_rest_module.html