cisco.aci.aci_bd_subnet – Manage Subnets (fv:Subnet)

Note

This plugin is part of the cisco.aci collection (version 2.1.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.aci.

To use it in a playbook, specify: cisco.aci.aci_bd_subnet.

Synopsis

  • Manage Subnets on Cisco ACI fabrics.

Parameters

Parameter Choices/Defaults Comments
annotation
string
User-defined string for annotating an object.
If the value is not specified in the task, the value of environment variable ACI_ANNOTATION will be used instead.
bd
string
The name of the Bridge Domain.

aliases: bd_name
certificate_name
string
The X.509 certificate name attached to the APIC AAA user used for signature-based authentication.
If a private_key filename was provided, this defaults to the private_key basename, without extension.
If PEM-formatted content was provided for private_key, this defaults to the username value.
If the value is not specified in the task, the value of environment variable ACI_CERTIFICATE_NAME will be used instead.

aliases: cert_name
description
string
The description for the Subnet.

aliases: descr
enable_vip
boolean
    Choices:
  • no
  • yes
Determines if the Subnet should be treated as a VIP; used when the BD is extended to multiple sites.
The APIC defaults to no when unset during creation.
gateway
string
The IPv4 or IPv6 gateway address for the Subnet.

aliases: gateway_ip
host
string / required
IP Address or hostname of APIC resolvable by Ansible control host.
If the value is not specified in the task, the value of environment variable ACI_HOST will be used instead.

aliases: hostname
mask
integer
The subnet mask for the Subnet.
This is the number associated with CIDR notation.
For IPv4 addresses, accepted values range between 0 and 32.
For IPv6 addresses, accepted Values range between 0 and 128.

aliases: subnet_mask
name_alias
string
The alias for the current object. This relates to the nameAlias field in ACI.
nd_prefix_policy
string
The IPv6 Neighbor Discovery Prefix Policy to associate with the Subnet.
output_level
string
    Choices:
  • debug
  • info
  • normal
Influence the output of this ACI module.
normal means the standard output, incl. current dict
info adds informational output, incl. previous, proposed and sent dicts
debug adds debugging output, incl. filter_string, method, response, status and url information
If the value is not specified in the task, the value of environment variable ACI_OUTPUT_LEVEL will be used instead.
output_path
string
Path to a file that will be used to dump the ACI JSON configuration objects generated by the module.
If the value is not specified in the task, the value of environment variable ACI_OUTPUT_PATH will be used instead.
owner_key
string
User-defined string for the ownerKey attribute of an ACI object.
This attribute represents a key for enabling clients to own their data for entity correlation.
If the value is not specified in the task, the value of environment variable ACI_OWNER_KEY will be used instead.
owner_tag
string
User-defined string for the ownerTag attribute of an ACI object.
This attribute represents a tag for enabling clients to add their own data.
For example, to indicate who created this object.
If the value is not specified in the task, the value of environment variable ACI_OWNER_TAG will be used instead.
password
string
The password to use for authentication.
This option is mutual exclusive with private_key. If private_key is provided too, it will be used instead.
If the value is not specified in the task, the value of environment variables ACI_PASSWORD or ANSIBLE_NET_PASSWORD will be used instead.
port
integer
Port number to be used for REST connection.
The default value depends on parameter use_ssl.
If the value is not specified in the task, the value of environment variable ACI_PORT will be used instead.
preferred
boolean
    Choices:
  • no
  • yes
Determines if the Subnet is preferred over all available Subnets. Only one Subnet per Address Family (IPv4/IPv6). can be preferred in the Bridge Domain.
The APIC defaults to no when unset during creation.
private_key
string
Either a PEM-formatted private key file or the private key content used for signature-based authentication.
This value also influences the default certificate_name that is used.
This option is mutual exclusive with password. If password is provided too, it will be ignored.
If the value is not specified in the task, the value of environment variable ACI_PRIVATE_KEY or ANSIBLE_NET_SSH_KEYFILE will be used instead.

aliases: cert_key
route_profile
string
The Route Profile to the associate with the Subnet.
route_profile_l3_out
string
The L3 Out that contains the associated Route Profile.
scope
list / elements=string
    Choices:
  • private
  • public
  • shared
Determines the scope of the Subnet.
The private option only allows communication with hosts in the same VRF.
The public option allows the Subnet to be advertised outside of the ACI Fabric, and allows communication with hosts in other VRFs.
The shared option limits communication to hosts in either the same VRF or the shared VRF.
The value is a list of options, private and public are mutually exclusive, but both can be used with shared.
The APIC defaults to private when unset during creation.
state
string
    Choices:
  • absent
  • present
  • query
Use present or absent for adding or removing.
Use query for listing an object or multiple objects.
subnet_control
string
    Choices:
  • nd_ra
  • no_gw
  • querier_ip
  • unspecified
Determines the Subnet's Control State.
The querier_ip option is used to treat the gateway_ip as an IGMP querier source IP.
The nd_ra option is used to treat the gateway_ip address as a Neighbor Discovery Router Advertisement Prefix.
The no_gw option is used to remove default gateway functionality from the gateway address.
The APIC defaults to nd_ra when unset during creation.
subnet_name
string
The name of the Subnet.

aliases: name
tenant
string
The name of the Tenant.

aliases: tenant_name
timeout
integer
Default:
30
The socket level timeout in seconds.
If the value is not specified in the task, the value of environment variable ACI_TIMEOUT will be used instead.
use_proxy
boolean
    Choices:
  • no
  • yes
If no, it will not use a proxy, even if one is defined in an environment variable on the target hosts.
If the value is not specified in the task, the value of environment variable ACI_USE_PROXY will be used instead.
use_ssl
boolean
    Choices:
  • no
  • yes
If no, an HTTP connection will be used instead of the default HTTPS connection.
If the value is not specified in the task, the value of environment variable ACI_USE_SSL will be used instead.
username
string
Default:
"admin"
The username to use for authentication.
If the value is not specified in the task, the value of environment variables ACI_USERNAME or ANSIBLE_NET_USERNAME will be used instead.

aliases: user
validate_certs
boolean
    Choices:
  • no
  • yes
If no, SSL certificates will not be validated.
This should only set to no when used on personally controlled sites using self-signed certificates.
If the value is not specified in the task, the value of environment variable ACI_VALIDATE_CERTS will be used instead.

Notes

Note

  • The gateway parameter is the root key used to access the Subnet (not name), so the gateway is required when the state is absent or present.
  • The tenant and bd used must exist before using this module in your playbook. The cisco.aci.aci_tenant module and cisco.aci.aci_bd can be used for these.

See Also

See also

cisco.aci.aci_bd

The official documentation on the cisco.aci.aci_bd module.

cisco.aci.aci_tenant

The official documentation on the cisco.aci.aci_tenant module.

APIC Management Information Model reference

More information about the internal APIC class fv:Subnet.

Cisco ACI Guide

Detailed information on how to manage your ACI infrastructure using Ansible.

Developing Cisco ACI modules

Detailed guide on how to write your own Cisco ACI modules to contribute.

Examples

- name: Create a tenant
  cisco.aci.aci_tenant:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: production
    state: present
  delegate_to: localhost

- name: Create a bridge domain
  cisco.aci.aci_bd:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: production
    bd: database
    state: present
  delegate_to: localhost

- name: Create a subnet
  cisco.aci.aci_bd_subnet:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: production
    bd: database
    gateway: 10.1.1.1
    mask: 24
    state: present
  delegate_to: localhost

- name: Create a subnet with options
  cisco.aci.aci_bd_subnet:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: production
    bd: database
    subnet_name: sql
    gateway: 10.1.2.1
    mask: 23
    description: SQL Servers
    scope: public
    route_profile_l3_out: corp
    route_profile: corp_route_profile
    state: present
  delegate_to: localhost

- name: Update a subnets scope to private and shared
  cisco.aci.aci_bd_subnet:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: production
    bd: database
    gateway: 10.1.1.1
    mask: 24
    scope: [private, shared]
    state: present
  delegate_to: localhost

- name: Get all subnets
  cisco.aci.aci_bd_subnet:
    host: apic
    username: admin
    password: SomeSecretPassword
    state: query
  delegate_to: localhost

- name: Get all subnets of specific gateway in specified tenant
  cisco.aci.aci_bd_subnet:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: production
    gateway: 10.1.1.1
    mask: 24
    state: query
  delegate_to: localhost
  register: query_result

- name: Get specific subnet
  cisco.aci.aci_bd_subnet:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: production
    bd: database
    gateway: 10.1.1.1
    mask: 24
    state: query
  delegate_to: localhost
  register: query_result

- name: Delete a subnet
  cisco.aci.aci_bd_subnet:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: production
    bd: database
    gateway: 10.1.1.1
    mask: 24
    state: absent
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
current
list / elements=string
success
The existing configuration from the APIC after the module has finished

Sample:
[{'fvTenant': {'attributes': {'descr': 'Production environment', 'dn': 'uni/tn-production', 'name': 'production', 'nameAlias': '', 'ownerKey': '', 'ownerTag': ''}}}]
error
dictionary
failure
The error information as returned from the APIC

Sample:
{'code': '122', 'text': 'unknown managed object class foo'}
filter_string
string
failure or debug
The filter string used for the request

Sample:
?rsp-prop-include=config-only
method
string
failure or debug
The HTTP method used for the request to the APIC

Sample:
POST
previous
list / elements=string
info
The original configuration from the APIC before the module has started

Sample:
[{'fvTenant': {'attributes': {'descr': 'Production', 'dn': 'uni/tn-production', 'name': 'production', 'nameAlias': '', 'ownerKey': '', 'ownerTag': ''}}}]
proposed
dictionary
info
The assembled configuration from the user-provided parameters

Sample:
{'fvTenant': {'attributes': {'descr': 'Production environment', 'name': 'production'}}}
raw
string
parse error
The raw output returned by the APIC REST API (xml or json)

Sample:
<?xml version="1.0" encoding="UTF-8"?><imdata totalCount="1"><error code="122" text="unknown managed object class foo"/></imdata>
response
string
failure or debug
The HTTP response from the APIC

Sample:
OK (30 bytes)
sent
list / elements=string
info
The actual/minimal configuration pushed to the APIC

Sample:
{'fvTenant': {'attributes': {'descr': 'Production environment'}}}
status
integer
failure or debug
The HTTP status from the APIC

Sample:
200
url
string
failure or debug
The HTTP url used for the request to the APIC

Sample:
https://10.11.12.13/api/mo/uni/tn-production.json


Authors

  • Jacob McGill (@jmcgill298)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/cisco/aci/aci_bd_subnet_module.html