community.network.ce_static_route_bfd – Manages static route configuration on HUAWEI CloudEngine switches.

Note

This plugin is part of the community.network collection (version 3.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.ce_static_route_bfd.

New in version 0.2.0: of community.network

Synopsis

  • Manages the static routes on HUAWEI CloudEngine switches.

Parameters

Parameter Choices/Defaults Comments
aftype
string / required
    Choices:
  • v4
  • v6
Destination ip address family type of static route.
bfd_session_name
string
bfd name (range 1-15).
commands
list / elements=string
Incoming command line is used to send sys,undo ip route-static default-bfd,commit.
description
string
Name of the route. Used with the name parameter on the CLI.
destvrf
string
VPN instance of next hop ip address.
detect_multiplier
integer
Configure the BFD multiplier (range 3-50).
function_flag
string / required
    Choices:
  • globalBFD
  • singleBFD
  • dynamicBFD
  • staticBFD
Used to distinguish between command line functions.
mask
string
Destination ip mask of static route.
min_rx_interval
integer
Set the minimum BFD receive interval (range 50-1000).
min_tx_interval
integer
Set the minimum BFD session sending interval (range 50-1000).
next_hop
string
Next hop address of static route.
nhp_interface
string
Next hop interface full name of static route.
pref
integer
Preference or administrative difference of route (range 1-255).
prefix
string / required
Destination ip address of static route.
state
string
    Choices:
  • present ←
  • absent
Specify desired state of the resource.
tag
integer
Route tag value (numeric).
vrf
string
VPN instance of destination ip address.

Notes

Note

  • This module requires the netconf system service be enabled on the remote device being managed.
  • Recommended connection is netconf.
  • This module also works with local connections for legacy playbooks.
  • If no vrf is supplied, vrf is set to default.
  • If state=absent, the route configuration will be removed, regardless of the non-required parameters.

Examples

#ip route-static bfd interface-type interface-number nexthop-address [ local-address address ]
#[ min-rx-interval min-rx-interval | min-tx-interval min-tx-interval | detect-multiplier multiplier ]
- name: Config an ip route-static bfd 10GE1/0/1 3.3.3.3 min-rx-interval 50 min-tx-interval 50 detect-multiplier 5
  community.network.ce_static_route_bfd:
    function_flag: 'singleBFD'
    nhp_interface: 10GE1/0/1
    next_hop: 3.3.3.3
    min_tx_interval: 50
    min_rx_interval: 50
    detect_multiplier: 5
    aftype: v4
    state: present

#undo ip route-static bfd [ interface-type interface-number | vpn-instance vpn-instance-name ] nexthop-address
- name: Undo ip route-static bfd 10GE1/0/1 3.3.3.4
  community.network.ce_static_route_bfd:
    function_flag: 'singleBFD'
    nhp_interface: 10GE1/0/1
    next_hop: 3.3.3.4
    aftype: v4
    state: absent

#ip route-static default-bfd { min-rx-interval {min-rx-interval} | min-tx-interval {min-tx-interval} | detect-multiplier {multiplier}}
- name: Config an ip route-static default-bfd min-rx-interval 50 min-tx-interval 50 detect-multiplier 6
  community.network.ce_static_route_bfd:
    function_flag: 'globalBFD'
    min_tx_interval: 50
    min_rx_interval: 50
    detect_multiplier: 6
    aftype: v4
    state: present

- name: Undo ip route-static default-bfd
  community.network.ce_static_route_bfd:
    function_flag: 'globalBFD'
    aftype: v4
    state: absent
    commands: 'sys,undo ip route-static default-bfd,commit'

- name: Config an ipv4 static route 2.2.2.0/24 2.2.2.1 preference 1 tag 2 description test for staticBFD
  community.network.ce_static_route_bfd:
    function_flag: 'staticBFD'
    prefix: 2.2.2.2
    mask: 24
    next_hop: 2.2.2.1
    tag: 2
    description: test
    pref: 1
    aftype: v4
    bfd_session_name: btoa
    state: present

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
changed
boolean
always
check to see if a change was made on the device

Sample:
True
end_state
dictionary
always
k/v pairs of switchport after module execution

Sample:
{'bfd_session_name': 'btoa', 'description': 'testing', 'function_flag': 'staticBFD', 'mask': '24', 'next_hop': '3.3.3.3', 'pref': '100', 'prefix': '192.168.20.0', 'tag': 'null'}
existing
dictionary
always
k/v pairs of existing switchport

Sample:
{'bfd_session_name': 'btoa', 'description': 'testing', 'function_flag': '', 'mask': '24', 'next_hop': '', 'pref': '101', 'prefix': '192.168.20.0', 'tag': 'null'}
proposed
dictionary
always
k/v pairs of parameters passed into module

Sample:
{'bfd_session_name': 'btoa', 'description': 'testing', 'function_flag': 'staticBFD', 'mask': '24', 'next_hop': '3.3.3.3', 'pref': '100', 'prefix': '192.168.20.642', 'vrf': '_public_'}
updates
list / elements=string
always
command list sent to the device

Sample:
['ip route-static 192.168.20.0 255.255.255.0 3.3.3.3 preference 100 description testing']


Authors

  • xuxiaowei0512 (@CloudEngine-Ansible)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/community/network/ce_static_route_bfd_module.html